Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/Makefile

@@ -55,8 +55,8 @@ tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110)
 tune-$(CONFIG_CPU_V6)		:=-mtune=strongarm
 
 # Need -Uarm for gcc < 3.x
-CFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) $(call cc-option,-malignment-traps,-mshort-load-bytes) -msoft-float -Wa,-mno-fpu -Uarm
-AFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) -msoft-float -Wa,-mno-fpu
+CFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) $(call cc-option,-malignment-traps,-mshort-load-bytes) -msoft-float -Uarm
+AFLAGS		+=-mapcs-32 $(arch-y) $(tune-y) -msoft-float
 
 CHECKFLAGS	+= -D__arm__=1
 

arch/arm/kernel/traps.c

@@ -381,7 +381,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 {
 	struct vm_area_struct *vma;
 
-	if (end < start)
+	if (end < start || flags)
 		return;
 
 	vma = find_vma(current->active_mm, start);
@@ -391,7 +391,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 		if (end > vma->vm_end)
 			end = vma->vm_end;
 
-		flush_cache_range(vma, start, end);
+		flush_cache_user_range(vma, start, end);
 	}
 }
 

arch/arm/mach-pxa/irq.c

@@ -25,34 +25,58 @@
 
 
 /*
- * This is for IRQs known as PXA_IRQ([8...31]).
+ * This is for peripheral IRQs internal to the PXA chip.
  */
 
-static void pxa_mask_irq(unsigned int irq)
+static void pxa_mask_low_irq(unsigned int irq)
 {
 	ICMR &= ~(1 << (irq + PXA_IRQ_SKIP));
 }
 
-static void pxa_unmask_irq(unsigned int irq)
+static void pxa_unmask_low_irq(unsigned int irq)
 {
 	ICMR |= (1 << (irq + PXA_IRQ_SKIP));
 }
 
-static struct irqchip pxa_internal_chip = {
-	.ack		= pxa_mask_irq,
-	.mask		= pxa_mask_irq,
-	.unmask		= pxa_unmask_irq,
+static struct irqchip pxa_internal_chip_low = {
+	.ack		= pxa_mask_low_irq,
+	.mask		= pxa_mask_low_irq,
+	.unmask		= pxa_unmask_low_irq,
 };
 
+#if PXA_INTERNAL_IRQS > 32
+
+/*
+ * This is for the second set of internal IRQs as found on the PXA27x.
+ */
+
+static void pxa_mask_high_irq(unsigned int irq)
+{
+	ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP));
+}
+
+static void pxa_unmask_high_irq(unsigned int irq)
+{
+	ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
+}
+
+static struct irqchip pxa_internal_chip_high = {
+	.ack		= pxa_mask_high_irq,
+	.mask		= pxa_mask_high_irq,
+	.unmask		= pxa_unmask_high_irq,
+};
+
+#endif
+
 /*
  * PXA GPIO edge detection for IRQs:
  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
  * Use this instead of directly setting GRER/GFER.
  */
 
-static long GPIO_IRQ_rising_edge[3];
-static long GPIO_IRQ_falling_edge[3];
-static long GPIO_IRQ_mask[3];
+static long GPIO_IRQ_rising_edge[4];
+static long GPIO_IRQ_falling_edge[4];
+static long GPIO_IRQ_mask[4];
 
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
@@ -106,13 +130,13 @@ static void pxa_ack_low_gpio(unsigned int irq)
 
 static struct irqchip pxa_low_gpio_chip = {
 	.ack		= pxa_ack_low_gpio,
-	.mask		= pxa_mask_irq,
-	.unmask		= pxa_unmask_irq,
+	.mask		= pxa_mask_low_irq,
+	.unmask		= pxa_unmask_low_irq,
 	.type		= pxa_gpio_irq_type,
 };
 
 /*
- * Demux handler for GPIO 2-80 edge detect interrupts
+ * Demux handler for GPIO>=2 edge detect interrupts
  */
 
 static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc,
@@ -169,6 +193,23 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc,
 			} while (mask);
 			loop = 1;
 		}
+
+#if PXA_LAST_GPIO >= 96
+		mask = GEDR3;
+		if (mask) {
+			GEDR3 = mask;
+			irq = IRQ_GPIO(96);
+			desc = irq_desc + irq;
+			do {
+				if (mask & 1)
+					desc->handle(irq, desc, regs);
+				irq++;
+				desc++;
+				mask >>= 1;
+			} while (mask);
+			loop = 1;
+		}
+#endif
 	} while (loop);
 }
 
@@ -208,17 +249,18 @@ void __init pxa_init_irq(void)
 	int irq;
 
 	/* disable all IRQs */
-	ICMR = 0;
+	ICMR = ICMR2 = 0;
 
 	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
+	ICLR = ICLR2 = 0;
 
 	/* clear all GPIO edge detects */
-	GFER0 = GFER1 = GFER2 = 0;
-	GRER0 = GRER1 = GRER2 = 0;
+	GFER0 = GFER1 = GFER2 = GFER3 = 0;
+	GRER0 = GRER1 = GRER2 = GRER3 = 0;
 	GEDR0 = GEDR0;
 	GEDR1 = GEDR1;
 	GEDR2 = GEDR2;
+	GEDR3 = GEDR3;
 
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
@@ -227,10 +269,18 @@ void __init pxa_init_irq(void)
 	GPIO_IRQ_mask[0] = 3;
 
 	for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
-		set_irq_chip(irq, &pxa_internal_chip);
+		set_irq_chip(irq, &pxa_internal_chip_low);
+		set_irq_handler(irq, do_level_IRQ);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+#if PXA_INTERNAL_IRQS > 32
+	for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) {
+		set_irq_chip(irq, &pxa_internal_chip_high);
 		set_irq_handler(irq, do_level_IRQ);
 		set_irq_flags(irq, IRQF_VALID);
 	}
+#endif
 
 	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
 		set_irq_chip(irq, &pxa_low_gpio_chip);
@@ -238,13 +288,13 @@ void __init pxa_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(80); irq++) {
+	for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) {
 		set_irq_chip(irq, &pxa_muxed_gpio_chip);
 		set_irq_handler(irq, do_edge_IRQ);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	/* Install handler for GPIO 2-80 edge detect interrupts */
-	set_irq_chip(IRQ_GPIO_2_80, &pxa_internal_chip);
-	set_irq_chained_handler(IRQ_GPIO_2_80, pxa_gpio_demux_handler);
+	/* Install handler for GPIO>=2 edge detect interrupts */
+	set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
+	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
 }

arch/arm/mm/Makefile

@@ -3,7 +3,8 @@
 #
 
 obj-y				:= consistent.o extable.o fault-armv.o \
-				   fault.o init.o ioremap.o mmap.o mm-armv.o
+				   fault.o flush.o init.o ioremap.o mmap.o \
+				   mm-armv.o
 
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 

arch/arm/mm/cache-v3.S

@@ -57,6 +57,19 @@ ENTRY(v3_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 ENTRY(v3_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v3_coherent_user_range)
 	mov	pc, lr
 
 /*
@@ -116,6 +129,7 @@ ENTRY(v3_cache_fns)
 	.long	v3_flush_user_cache_all
 	.long	v3_flush_user_cache_range
 	.long	v3_coherent_kern_range
+	.long	v3_coherent_user_range
 	.long	v3_flush_kern_dcache_page
 	.long	v3_dma_inv_range
 	.long	v3_dma_clean_range

arch/arm/mm/cache-v4.S

@@ -59,6 +59,19 @@ ENTRY(v4_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 ENTRY(v4_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4_coherent_user_range)
 	mov	pc, lr
 
 /*
@@ -118,6 +131,7 @@ ENTRY(v4_cache_fns)
 	.long	v4_flush_user_cache_all
 	.long	v4_flush_user_cache_range
 	.long	v4_coherent_kern_range
+	.long	v4_coherent_user_range
 	.long	v4_flush_kern_dcache_page
 	.long	v4_dma_inv_range
 	.long	v4_dma_clean_range

arch/arm/mm/cache-v4wb.S

@@ -121,6 +121,19 @@ ENTRY(v4wb_flush_kern_dcache_page)
  *	- end	 - virtual end address
  */
 ENTRY(v4wb_coherent_kern_range)
+	/* fall through */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
@@ -195,6 +208,7 @@ ENTRY(v4wb_cache_fns)
 	.long	v4wb_flush_user_cache_all
 	.long	v4wb_flush_user_cache_range
 	.long	v4wb_coherent_kern_range
+	.long	v4wb_coherent_user_range
 	.long	v4wb_flush_kern_dcache_page
 	.long	v4wb_dma_inv_range
 	.long	v4wb_dma_clean_range

arch/arm/mm/cache-v4wt.S

@@ -97,6 +97,19 @@ ENTRY(v4wt_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 ENTRY(v4wt_coherent_kern_range)
+	/* FALLTRHOUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wt_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -167,6 +180,7 @@ ENTRY(v4wt_cache_fns)
 	.long	v4wt_flush_user_cache_all
 	.long	v4wt_flush_user_cache_range
 	.long	v4wt_coherent_kern_range
+	.long	v4wt_coherent_user_range
 	.long	v4wt_flush_kern_dcache_page
 	.long	v4wt_dma_inv_range
 	.long	v4wt_dma_clean_range

arch/arm/mm/cache-v6.S

@@ -75,6 +75,22 @@ ENTRY(v6_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	v6_coherent_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v6_coherent_user_range)
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
@@ -203,6 +219,7 @@ ENTRY(v6_cache_fns)
 	.long	v6_flush_user_cache_all
 	.long	v6_flush_user_cache_range
 	.long	v6_coherent_kern_range
+	.long	v6_coherent_user_range
 	.long	v6_flush_kern_dcache_page
 	.long	v6_dma_inv_range
 	.long	v6_dma_clean_range

arch/arm/mm/copypage-v6.c

@@ -31,14 +31,46 @@ static spinlock_t v6_lock = SPIN_LOCK_UNLOCKED;
 
 #define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
+/*
+ * Copy the user page.  No aliasing to deal with so we can just
+ * attack the kernel's existing mapping of these pages.
+ */
+void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+{
+	copy_page(kto, kfrom);
+}
+
+/*
+ * Clear the user page.  No aliasing to deal with so we can just
+ * attack the kernel's existing mapping of this page.
+ */
+void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+{
+	clear_page(kaddr);
+}
+
 /*
  * Copy the page, taking account of the cache colour.
  */
-void v6_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
 {
 	unsigned int offset = DCACHE_COLOUR(vaddr);
 	unsigned long from, to;
 
+	/*
+	 * Discard data in the kernel mapping for the new page.
+	 * FIXME: needs this MCRR to be supported.
+	 */
+	__asm__("mcrr	p15, 0, %1, %0, c6	@ 0xec401f06"
+	   :
+	   : "r" (kto),
+	     "r" ((unsigned long)kto + PAGE_SIZE - L1_CACHE_BYTES)
+	   : "cc");
+
+	/*
+	 * Now copy the page using the same cache colour as the
+	 * pages ultimate destination.
+	 */
 	spin_lock(&v6_lock);
 
 	set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
@@ -55,11 +87,30 @@ void v6_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
 	spin_unlock(&v6_lock);
 }
 
-void v6_clear_user_page(void *kaddr, unsigned long vaddr)
+/*
+ * Clear the user page.  We need to deal with the aliasing issues,
+ * so remap the kernel page into the same cache colour as the user
+ * page.
+ */
+void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 {
 	unsigned int offset = DCACHE_COLOUR(vaddr);
 	unsigned long to = to_address + (offset << PAGE_SHIFT);
 
+	/*
+	 * Discard data in the kernel mapping for the new page
+	 * FIXME: needs this MCRR to be supported.
+	 */
+	__asm__("mcrr	p15, 0, %1, %0, c6	@ 0xec401f06"
+	   :
+	   : "r" (kaddr),
+	     "r" ((unsigned long)kaddr + PAGE_SIZE - L1_CACHE_BYTES)
+	   : "cc");
+
+	/*
+	 * Now clear the page using the same cache colour as
+	 * the pages ultimate destination.
+	 */
 	spin_lock(&v6_lock);
 
 	set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
@@ -70,12 +121,13 @@ void v6_clear_user_page(void *kaddr, unsigned long vaddr)
 }
 
 struct cpu_user_fns v6_user_fns __initdata = {
-	.cpu_clear_user_page	= v6_clear_user_page,
-	.cpu_copy_user_page	= v6_copy_user_page,
+	.cpu_clear_user_page	= v6_clear_user_page_nonaliasing,
+	.cpu_copy_user_page	= v6_copy_user_page_nonaliasing,
 };
 
 static int __init v6_userpage_init(void)
 {
+	if (cache_is_vipt_aliasing()) {
 		pgd_t *pgd;
 		pmd_t *pmd;
 
@@ -91,6 +143,10 @@ static int __init v6_userpage_init(void)
 		if (!to_pte)
 			BUG();
 
+		v6_user_fns.cpu_clear_user_page = v6_clear_user_page_aliasing;
+		v6_user_fns.cpu_copy_user_page = v6_copy_user_page_aliasing;
+	}
+
 	return 0;
 }
 

arch/arm/mm/fault-armv.c

@@ -76,52 +76,6 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	return 0;
 }
 
-static void __flush_dcache_page(struct page *page)
-{
-	struct address_space *mapping = page_mapping(page);
-	struct mm_struct *mm = current->active_mm;
-	struct vm_area_struct *mpnt;
-	struct prio_tree_iter iter;
-	unsigned long offset;
-	pgoff_t pgoff;
-
-	__cpuc_flush_dcache_page(page_address(page));
-
-	if (!mapping)
-		return;
-
-	/*
-	 * With a VIVT cache, we need to also write back
-	 * and invalidate any user data.
-	 */
-	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
-
-	flush_dcache_mmap_lock(mapping);
-	vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) {
-		/*
-		 * If this VMA is not in our MM, we can ignore it.
-		 */
-		if (mpnt->vm_mm != mm)
-			continue;
-		if (!(mpnt->vm_flags & VM_MAYSHARE))
-			continue;
-		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		flush_cache_page(mpnt, mpnt->vm_start + offset);
-	}
-	flush_dcache_mmap_unlock(mapping);
-}
-
-void flush_dcache_page(struct page *page)
-{
-	struct address_space *mapping = page_mapping(page);
-
-	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
-	else
-		__flush_dcache_page(page);
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
 static void
 make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, int dirty)
 {
@@ -188,9 +142,20 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 	if (page_mapping(page)) {
 		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
 
-		if (dirty)
+		if (dirty) {
+			/*
+			 * This is our first userspace mapping of this page.
+			 * Ensure that the physical page is coherent with
+			 * the kernel mapping.
+			 *
+			 * FIXME: only need to do this on VIVT and aliasing
+			 *        VIPT cache architectures.  We can do that
+			 *	  by choosing whether to set this bit...
+			 */
 			__cpuc_flush_dcache_page(page_address(page));
+		}
 
+		if (cache_is_vivt())
 			make_coherent(vma, addr, page, dirty);
 	}
 }

arch/arm/mm/flush.c

+/*
+ *  linux/arch/arm/mm/flush.c
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system.h>
+
+static void __flush_dcache_page(struct address_space *mapping, struct page *page)
+{
+	struct mm_struct *mm = current->active_mm;
+	struct vm_area_struct *mpnt;
+	struct prio_tree_iter iter;
+	pgoff_t pgoff;
+
+	/*
+	 * Writeback any data associated with the kernel mapping of this
+	 * page.  This ensures that data in the physical page is mutually
+	 * coherent with the kernels mapping.
+	 */
+	__cpuc_flush_dcache_page(page_address(page));
+
+	/*
+	 * If there's no mapping pointer here, then this page isn't
+	 * visible to userspace yet, so there are no cache lines
+	 * associated with any other aliases.
+	 */
+	if (!mapping)
+		return;
+
+	/*
+	 * There are possible user space mappings of this page:
+	 * - VIVT cache: we need to also write back and invalidate all user
+	 *   data in the current VM view associated with this page.
+	 * - aliasing VIPT: we only need to find one mapping of this page.
+	 */
+	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+
+	flush_dcache_mmap_lock(mapping);
+	vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) {
+		unsigned long offset;
+
+		/*
+		 * If this VMA is not in our MM, we can ignore it.
+		 */
+		if (mpnt->vm_mm != mm)
+			continue;
+		if (!(mpnt->vm_flags & VM_MAYSHARE))
+			continue;
+		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
+		flush_cache_page(mpnt, mpnt->vm_start + offset);
+		if (cache_is_vipt())
+			break;
+	}
+	flush_dcache_mmap_unlock(mapping);
+}
+
+/*
+ * Ensure cache coherency between kernel mapping and userspace mapping
+ * of this page.
+ *
+ * We have three cases to consider:
+ *  - VIPT non-aliasing cache: fully coherent so nothing required.
+ *  - VIVT: fully aliasing, so we need to handle every alias in our
+ *          current VM view.
+ *  - VIPT aliasing: need to handle one alias in our current VM view.
+ *
+ * If we need to handle aliasing:
+ *  If the page only exists in the page cache and there are no user
+ *  space mappings, we can be lazy and remember that we may have dirty
+ *  kernel cache lines for later.  Otherwise, we assume we have
+ *  aliasing mappings.
+ */
+void flush_dcache_page(struct page *page)
+{
+	struct address_space *mapping = page_mapping(page);
+
+	if (cache_is_vipt_nonaliasing())
+		return;
+
+	if (mapping && !mapping_mapped(mapping))
+		set_bit(PG_dcache_dirty, &page->flags);
+	else
+		__flush_dcache_page(mapping, page);
+}
+EXPORT_SYMBOL(flush_dcache_page);

arch/arm/mm/proc-arm1020.S

@@ -196,6 +196,19 @@ ENTRY(arm1020_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm1020_coherent_kern_range)
+	/* FALLTRHOUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1020_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcr	p15, 0, ip, c7, c10, 4
@@ -317,6 +330,7 @@ ENTRY(arm1020_cache_fns)
 	.long	arm1020_flush_user_cache_all
 	.long	arm1020_flush_user_cache_range
 	.long	arm1020_coherent_kern_range
+	.long	arm1020_coherent_user_range
 	.long	arm1020_flush_kern_dcache_page
 	.long	arm1020_dma_inv_range
 	.long	arm1020_dma_clean_range

arch/arm/mm/proc-arm1020e.S

@@ -193,6 +193,18 @@ ENTRY(arm1020e_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm1020e_coherent_kern_range)
+	/* FALLTHROUGH */
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1020e_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
@@ -304,6 +316,7 @@ ENTRY(arm1020e_cache_fns)
 	.long	arm1020e_flush_user_cache_all
 	.long	arm1020e_flush_user_cache_range
 	.long	arm1020e_coherent_kern_range
+	.long	arm1020e_coherent_user_range
 	.long	arm1020e_flush_kern_dcache_page
 	.long	arm1020e_dma_inv_range
 	.long	arm1020e_dma_clean_range

arch/arm/mm/proc-arm1022.S

@@ -180,6 +180,19 @@ ENTRY(arm1022_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm1022_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1022_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
@@ -291,6 +304,7 @@ ENTRY(arm1022_cache_fns)
 	.long	arm1022_flush_user_cache_all
 	.long	arm1022_flush_user_cache_range
 	.long	arm1022_coherent_kern_range
+	.long	arm1022_coherent_user_range
 	.long	arm1022_flush_kern_dcache_page
 	.long	arm1022_dma_inv_range
 	.long	arm1022_dma_clean_range

arch/arm/mm/proc-arm1026.S

@@ -175,6 +175,18 @@ ENTRY(arm1026_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm1026_coherent_kern_range)
+	/* FALLTHROUGH */
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1026_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
@@ -286,6 +298,7 @@ ENTRY(arm1026_cache_fns)
 	.long	arm1026_flush_user_cache_all
 	.long	arm1026_flush_user_cache_range
 	.long	arm1026_coherent_kern_range
+	.long	arm1026_coherent_user_range
 	.long	arm1026_flush_kern_dcache_page
 	.long	arm1026_dma_inv_range
 	.long	arm1026_dma_clean_range

arch/arm/mm/proc-arm920.S

@@ -182,6 +182,19 @@ ENTRY(arm920_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm920_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm920_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -277,6 +290,7 @@ ENTRY(arm920_cache_fns)
 	.long	arm920_flush_user_cache_all
 	.long	arm920_flush_user_cache_range
 	.long	arm920_coherent_kern_range
+	.long	arm920_coherent_user_range
 	.long	arm920_flush_kern_dcache_page
 	.long	arm920_dma_inv_range
 	.long	arm920_dma_clean_range

arch/arm/mm/proc-arm922.S

@@ -184,6 +184,19 @@ ENTRY(arm922_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm922_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm922_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -279,6 +292,7 @@ ENTRY(arm922_cache_fns)
 	.long	arm922_flush_user_cache_all
 	.long	arm922_flush_user_cache_range
 	.long	arm922_coherent_kern_range
+	.long	arm922_coherent_user_range
 	.long	arm922_flush_kern_dcache_page
 	.long	arm922_dma_inv_range
 	.long	arm922_dma_clean_range

arch/arm/mm/proc-arm925.S

@@ -225,6 +225,19 @@ ENTRY(arm925_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm925_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm925_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -329,6 +342,7 @@ ENTRY(arm925_cache_fns)
 	.long	arm925_flush_user_cache_all
 	.long	arm925_flush_user_cache_range
 	.long	arm925_coherent_kern_range
+	.long	arm925_coherent_user_range
 	.long	arm925_flush_kern_dcache_page
 	.long	arm925_dma_inv_range
 	.long	arm925_dma_clean_range

arch/arm/mm/proc-arm926.S

@@ -185,6 +185,19 @@ ENTRY(arm926_flush_user_cache_range)
  *	- end	- virtual end address
  */
 ENTRY(arm926_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm926_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -289,6 +302,7 @@ ENTRY(arm926_cache_fns)
 	.long	arm926_flush_user_cache_all
 	.long	arm926_flush_user_cache_range
 	.long	arm926_coherent_kern_range
+	.long	arm926_coherent_user_range
 	.long	arm926_flush_kern_dcache_page
 	.long	arm926_dma_inv_range
 	.long	arm926_dma_clean_range

arch/arm/mm/proc-xscale.S

@@ -241,6 +241,22 @@ ENTRY(xscale_flush_user_cache_range)
  *	it also trashes the mini I-cache used by JTAG debuggers.
  */
 ENTRY(xscale_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ *
+ *	Note: single I-cache line invalidation isn't used here since
+ *	it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_user_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHELINESIZE
@@ -341,6 +357,7 @@ ENTRY(xscale_cache_fns)
 	.long	xscale_flush_user_cache_all
 	.long	xscale_flush_user_cache_range
 	.long	xscale_coherent_kern_range
+	.long	xscale_coherent_user_range
 	.long	xscale_flush_kern_dcache_page
 	.long	xscale_dma_inv_range
 	.long	xscale_dma_clean_range

include/asm-arm/arch-ebsa110/param.h

 /*
  *  linux/include/asm-arm/arch-ebsa110/param.h
  */
-#define __KERNEL_HZ	200
+#define HZ	200

include/asm-arm/arch-l7200/param.h

@@ -16,4 +16,4 @@
 /*
  * See 'time.h' for how the RTC HZ rate is set
  */
-#define __KERNEL_HZ 128
+#define HZ 128

include/asm-arm/arch-pxa/hardware.h

@@ -59,10 +59,9 @@ typedef struct { volatile u32 offset[4096]; } __regbase;
 # define __REG(x)	__REGP(io_p2v(x))
 #endif
 
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)     (*(volatile u32 *)((u32)&__REG(x) + (y)))
 
 # define __PREG(x)	(io_v2p((u32)&(x)))
 

include/asm-arm/arch-pxa/irqs.h

@@ -12,19 +12,34 @@
 
 #include <linux/config.h>
 
-#define PXA_IRQ_SKIP	7	/* The first 7 IRQs are not yet used */
+#ifdef CONFIG_PXA27x
+#define PXA_IRQ_SKIP	0
+#else
+#define PXA_IRQ_SKIP	7
+#endif
+
 #define PXA_IRQ(x)	((x) - PXA_IRQ_SKIP)
 
-#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error */
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
 #define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
 #define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
-#define	IRQ_GPIO_2_80	PXA_IRQ(10)	/* GPIO[2-80] Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
 #define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
 #define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
 #define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
 #define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
-#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request */
-#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
 #define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
 #define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
 #define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
@@ -41,13 +56,28 @@
 #define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
 #define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
 
-#define GPIO_2_80_TO_IRQ(x)	\
-			PXA_IRQ((x) - 2 + 32)
-#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_80_TO_IRQ(x))
+#ifdef CONFIG_PXA27x
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
 
-#define IRQ_TO_GPIO_2_80(i)	\
-			((i) - PXA_IRQ(32) + 2)
-#define IRQ_TO_GPIO(i)	((i) - (((i) > IRQ_GPIO1) ? IRQ_GPIO(2) - 2 : IRQ_GPIO(0)))
+#define PXA_INTERNAL_IRQS 34
+#else
+#define PXA_INTERNAL_IRQS 32
+#endif
+
+#define GPIO_2_x_TO_IRQ(x)	\
+			PXA_IRQ((x) - 2 + PXA_INTERNAL_IRQS)
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	\
+			((i) - IRQ_GPIO(2) + 2)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+#if defined(CONFIG_PXA25x)
+#define PXA_LAST_GPIO	80
+#elif defined(CONFIG_PXA27x)
+#define PXA_LAST_GPIO	127
+#endif
 
 /*
  * The next 16 interrupts are for board specific purposes.  Since
@@ -55,7 +85,7 @@
  * these.  If you need more, increase IRQ_BOARD_END, but keep it
  * within sensible limits.
  */
-#define IRQ_BOARD_START		(IRQ_GPIO(80) + 1)
+#define IRQ_BOARD_START		(IRQ_GPIO(PXA_LAST_GPIO) + 1)
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 
 #define IRQ_SA1111_START	(IRQ_BOARD_END)

include/asm-arm/arch-pxa/pxa-regs.h

@@ -1134,15 +1134,15 @@ typedef void            (*ExcpHndlr) (void) ;
 #define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
 #define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
 
-#define GPLR(x) 	((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3)
-#define GPDR(x)		((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3)
-#define GPSR(x)		((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3)
-#define GPCR(x)		((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3)
-#define GRER(x)		((((x) & 0x7f) < 96) ? _GRER(x) : GRER3)
-#define GFER(x)		((((x) & 0x7f) < 96) ? _GFER(x) : GFER3)
-#define GEDR(x)		((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3)
-#define GAFR(x)		((((x) & 0x7f) < 96) ? _GAFR(x) : \
-			 ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U))
+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
 #else
 
 #define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)

include/asm-arm/arch-s3c2410/param.h

@@ -22,6 +22,6 @@
  * add a software pre-scaler to the evil timer systems.
 */
 
-#define __KERNEL_HZ   200
+#define HZ   200
 
 #endif /* __ASM_ARCH_PARAM_H */

include/asm-arm/atomic.h

@@ -44,21 +44,6 @@ static inline void atomic_set(atomic_t *v, int i)
 	: "cc");
 }
 
-static inline void atomic_add(int i, atomic_t *v)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-}
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -77,21 +62,6 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	return result;
 }
 
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-}
-
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -135,15 +105,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 
 #define atomic_set(v,i)	(((v)->counter) = (i))
 
-static inline void atomic_add(int i, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	v->counter += i;
-	local_irq_restore(flags);
-}
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;
@@ -157,15 +118,6 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	return val;
 }
 
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	v->counter -= i;
-	local_irq_restore(flags);
-}
-
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	unsigned long flags;
@@ -190,8 +142,10 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 
 #endif /* __LINUX_ARM_ARCH__ */
 
-#define atomic_inc(v)		atomic_add(1, v)
-#define atomic_dec(v)		atomic_sub(1, v)
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
+#define atomic_inc(v)		(void) atomic_add_return(1, v)
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
+#define atomic_dec(v)		(void) atomic_sub_return(1, v)
 
 #define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
 #define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)

include/asm-arm/cacheflush.h

@@ -157,6 +157,7 @@ struct cpu_cache_fns {
 	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
 
 	void (*coherent_kern_range)(unsigned long, unsigned long);
+	void (*coherent_user_range)(unsigned long, unsigned long);
 	void (*flush_kern_dcache_page)(void *);
 
 	void (*dma_inv_range)(unsigned long, unsigned long);
@@ -175,6 +176,7 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_flush_user_all		cpu_cache.flush_user_all
 #define __cpuc_flush_user_range		cpu_cache.flush_user_range
 #define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
+#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
 #define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
 
 /*
@@ -193,12 +195,14 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
 #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
 #define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
 
 extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
 extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
 extern void __cpuc_flush_dcache_page(void *);
 
 /*
@@ -267,6 +271,14 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr)
 	}
 }
 
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the ARM private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma,start,end) \
+	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
 /*
  * Perform necessary cache operations to ensure that data previously
  * stored within this range of addresses can be executed by the CPU.

include/asm-arm/param.h

@@ -10,14 +10,13 @@
 #ifndef __ASM_PARAM_H
 #define __ASM_PARAM_H
 
-#include <asm/arch/param.h>	/* for HZ */
+#ifdef __KERNEL__
+# include <asm/arch/param.h>		/* for kernel version of HZ */
 
-#ifndef __KERNEL_HZ
-#define __KERNEL_HZ	100
-#endif
+# ifndef HZ
+#  define HZ		100		/* Internal kernel timer frequency */
+# endif
 
-#ifdef __KERNEL__
-# define HZ		__KERNEL_HZ	/* Internal kernel timer frequency */
 # define USER_HZ	100		/* User interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
 #else

include/asm-arm/system.h

@@ -55,6 +55,38 @@
 		__val;							\
 	})
 
+#define __cacheid_present(val)		(val != read_cpuid(CPUID_ID))
+#define __cacheid_vivt(val)		((val & (15 << 25)) != (14 << 25))
+#define __cacheid_vipt(val)		((val & (15 << 25)) == (14 << 25))
+#define __cacheid_vipt_nonaliasing(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
+#define __cacheid_vipt_aliasing(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
+
+#define cache_is_vivt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
+	})
+		
+#define cache_is_vipt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) && __cacheid_vipt(__val);	\
+	})
+
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_aliasing(__val);			\
+	})
+
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust

include/asm-arm/unistd.h

@@ -475,51 +475,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
 #include <linux/types.h>
 #include <linux/syscalls.h>
 
-static inline pid_t setsid(void)
-{
-	return sys_setsid();
-}
-
-static inline long write(int fd, const char *buf, off_t count)
-{
-	return sys_write(fd, buf, count);
-}
-
-static inline long read(int fd, char *buf, off_t count)
-{
-	return sys_read(fd, buf, count);
-}
-
-static inline off_t lseek(int fd, off_t offset, int count)
-{
-	return sys_lseek(fd, offset, count);
-}
-
-static inline long dup(int fd)
-{
-	return sys_dup(fd);
-}
-
-static inline long open(const char *file, int flag, int mode)
-{
-	return sys_open(file, flag, mode);
-}
-
-static inline long close(int fd)
-{
-	return sys_close(fd);
-}
-
-static inline long _exit(int exitcode)
-{
-	return sys_exit(exitcode);
-}
-
-static inline pid_t waitpid(pid_t pid, int *wait_stat, int options)
-{
-	return sys_wait4((int)pid, wait_stat, options, NULL);
-}
-
 extern long execve(const char *file, char **argv, char **envp);
 
 struct pt_regs;