Commit 33190ebf authored by Vladimir Kondratiev's avatar Vladimir Kondratiev Committed by Kalle Valo

wil6210: restart AP upon change in privacy settings

privacy settings might change while AP is running.
Inside wil_cfg80211_change_beacon(), detect change
in privacy settings and handle it by stopping and
re-starting the AP.
Firmware cannot handle on-the-fly privacy settings
change and so AP restart is required.
Signed-off-by: default avatarDedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: default avatarHamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: default avatarVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent b24fc6fc
......@@ -736,6 +736,92 @@ static int wil_fix_bcon(struct wil6210_priv *wil,
return rc;
}
/* internal functions for device reset and starting AP */
static int _wil_cfg80211_set_ies(struct wiphy *wiphy,
size_t probe_ies_len, const u8 *probe_ies,
size_t assoc_ies_len, const u8 *assoc_ies)
{
int rc;
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
/* FW do not form regular beacon, so bcon IE's are not set
* For the DMG bcon, when it will be supported, bcon IE's will
* be reused; add something like:
* wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
* bcon->beacon_ies);
*/
rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, probe_ies_len, probe_ies);
if (rc) {
wil_err(wil, "set_ie(PROBE_RESP) failed\n");
return rc;
}
rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, assoc_ies_len, assoc_ies);
if (rc) {
wil_err(wil, "set_ie(ASSOC_RESP) failed\n");
return rc;
}
return 0;
}
static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
struct net_device *ndev,
const u8 *ssid, size_t ssid_len, u32 privacy,
int bi, u8 chan,
size_t probe_ies_len, const u8 *probe_ies,
size_t assoc_ies_len, const u8 *assoc_ies,
u8 hidden_ssid)
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
int rc;
struct wireless_dev *wdev = ndev->ieee80211_ptr;
u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
wil_set_recovery_state(wil, fw_recovery_idle);
mutex_lock(&wil->mutex);
__wil_down(wil);
rc = __wil_up(wil);
if (rc)
goto out;
rc = wmi_set_ssid(wil, ssid_len, ssid);
if (rc)
goto out;
rc = _wil_cfg80211_set_ies(wiphy, probe_ies_len, probe_ies,
assoc_ies_len, assoc_ies);
if (rc)
goto out;
wil->privacy = privacy;
wil->channel = chan;
wil->hidden_ssid = hidden_ssid;
netif_carrier_on(ndev);
rc = wmi_pcp_start(wil, bi, wmi_nettype, chan, hidden_ssid);
if (rc)
goto err_pcp_start;
rc = wil_bcast_init(wil);
if (rc)
goto err_bcast;
goto out; /* success */
err_bcast:
wmi_pcp_stop(wil);
err_pcp_start:
netif_carrier_off(ndev);
out:
mutex_unlock(&wil->mutex);
return rc;
}
static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
struct net_device *ndev,
struct cfg80211_beacon_data *bcon)
......@@ -746,6 +832,7 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
const u8 *pr_ies = NULL;
size_t pr_ies_len = 0;
int rc;
u32 privacy = 0;
wil_dbg_misc(wil, "%s()\n", __func__);
wil_print_bcon_data(bcon);
......@@ -760,40 +847,41 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
wil_print_bcon_data(bcon);
}
/* FW do not form regular beacon, so bcon IE's are not set
* For the DMG bcon, when it will be supported, bcon IE's will
* be reused; add something like:
* wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
* bcon->beacon_ies);
*/
rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, pr_ies_len, pr_ies);
if (rc) {
wil_err(wil, "set_ie(PROBE_RESP) failed\n");
return rc;
}
if (pr_ies && cfg80211_find_ie(WLAN_EID_RSN, pr_ies, pr_ies_len))
privacy = 1;
/* in case privacy has changed, need to restart the AP */
if (wil->privacy != privacy) {
struct wireless_dev *wdev = ndev->ieee80211_ptr;
rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP,
wil_dbg_misc(wil, "privacy changed %d=>%d. Restarting AP\n",
wil->privacy, privacy);
rc = _wil_cfg80211_start_ap(wiphy, ndev, wdev->ssid,
wdev->ssid_len, privacy,
wdev->beacon_interval,
wil->channel, pr_ies_len, pr_ies,
bcon->assocresp_ies_len,
bcon->assocresp_ies,
wil->hidden_ssid);
} else {
rc = _wil_cfg80211_set_ies(wiphy, pr_ies_len, pr_ies,
bcon->assocresp_ies_len,
bcon->assocresp_ies);
if (rc) {
wil_err(wil, "set_ie(ASSOC_RESP) failed\n");
return rc;
}
return 0;
return rc;
}
static int wil_cfg80211_start_ap(struct wiphy *wiphy,
struct net_device *ndev,
struct cfg80211_ap_settings *info)
{
int rc = 0;
int rc;
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
struct wireless_dev *wdev = ndev->ieee80211_ptr;
struct ieee80211_channel *channel = info->chandef.chan;
struct cfg80211_beacon_data *bcon = &info->beacon;
struct cfg80211_crypto_settings *crypto = &info->crypto;
u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
const u8 *pr_ies = NULL;
......@@ -807,6 +895,23 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
return -EINVAL;
}
switch (info->hidden_ssid) {
case NL80211_HIDDEN_SSID_NOT_IN_USE:
hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
break;
case NL80211_HIDDEN_SSID_ZERO_LEN:
hidden_ssid = WMI_HIDDEN_SSID_SEND_EMPTY;
break;
case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
hidden_ssid = WMI_HIDDEN_SSID_CLEAR;
break;
default:
wil_err(wil, "AP: Invalid hidden SSID %d\n", info->hidden_ssid);
return -EOPNOTSUPP;
}
wil_dbg_misc(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
channel->center_freq, info->privacy ? "secure" : "open");
wil_dbg_misc(wil, "Privacy: %d auth_type %d\n",
......@@ -830,70 +935,14 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
wil_print_bcon_data(bcon);
}
wil_set_recovery_state(wil, fw_recovery_idle);
mutex_lock(&wil->mutex);
__wil_down(wil);
rc = __wil_up(wil);
if (rc)
goto out;
rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
if (rc)
goto out;
/* IE's */
/* bcon 'head IE's are not relevant for 60g band */
/*
* FW do not form regular beacon, so bcon IE's are not set
* For the DMG bcon, when it will be supported, bcon IE's will
* be reused; add something like:
* wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
* bcon->beacon_ies);
*/
wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, pr_ies_len, pr_ies);
wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
bcon->assocresp_ies);
wil->privacy = info->privacy;
switch (info->hidden_ssid) {
case NL80211_HIDDEN_SSID_NOT_IN_USE:
hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
break;
case NL80211_HIDDEN_SSID_ZERO_LEN:
hidden_ssid = WMI_HIDDEN_SSID_SEND_EMPTY;
break;
case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
hidden_ssid = WMI_HIDDEN_SSID_CLEAR;
break;
default:
rc = -EOPNOTSUPP;
goto out;
}
netif_carrier_on(ndev);
rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
channel->hw_value, hidden_ssid);
if (rc)
goto err_pcp_start;
rc = wil_bcast_init(wil);
if (rc)
goto err_bcast;
rc = _wil_cfg80211_start_ap(wiphy, ndev,
info->ssid, info->ssid_len, info->privacy,
info->beacon_interval, channel->hw_value,
pr_ies_len, pr_ies,
bcon->assocresp_ies_len,
bcon->assocresp_ies,
hidden_ssid);
goto out; /* success */
err_bcast:
wmi_pcp_stop(wil);
err_pcp_start:
netif_carrier_off(ndev);
out:
mutex_unlock(&wil->mutex);
return rc;
}
......
......@@ -559,6 +559,8 @@ struct wil6210_priv {
/* profile */
u32 monitor_flags;
u32 privacy; /* secure connection? */
u8 hidden_ssid; /* relevant in AP mode */
u16 channel; /* relevant in AP mode */
int sinfo_gen;
u32 ap_isolate; /* no intra-BSS communication */
/* interrupt moderation */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment