Merge branch 'ib-extcon-phy-4.9' of...

Merge branch 'ib-extcon-phy-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into next

drivers/extcon/extcon-adc-jack.c

@@ -3,6 +3,9 @@
  *
  * Analog Jack extcon driver with ADC-based detection capability.
  *
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * MyungJoo Ham <myungjoo.ham@samsung.com>
  *
@@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
 	struct adc_jack_data *data = container_of(to_delayed_work(work),
 			struct adc_jack_data,
 			handler);
-	u32 state = 0;
+	struct adc_jack_cond *def;
 	int ret, adc_val;
 	int i;
 
@@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)
 
 	/* Get state from adc value with adc_conditions */
 	for (i = 0; i < data->num_conditions; i++) {
-		struct adc_jack_cond *def = &data->adc_conditions[i];
-		if (!def->state)
-			break;
+		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			state = def->state;
-			break;
+			extcon_set_cable_state_(data->edev, def->id, true);
+			return;
 		}
 	}
-	/* if no def has met, it means state = 0 (no cables attached) */
 
-	extcon_set_state(data->edev, state);
+	/* Set the detached state if adc value is not included in the range */
+	for (i = 0; i < data->num_conditions; i++) {
+		def = &data->adc_conditions[i];
+		extcon_set_cable_state_(data->edev, def->id, false);
+	}
 }
 
 static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (!pdata->adc_conditions ||
-			!pdata->adc_conditions[0].state) {
+	if (!pdata->adc_conditions) {
 		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
 		return -EINVAL;
 	}
 	data->adc_conditions = pdata->adc_conditions;
 
 	/* Check the length of array and set num_conditions */
-	for (i = 0; data->adc_conditions[i].state; i++)
-		;
+	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;
 
 	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
@@ -158,6 +160,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 	if (data->wakeup_source)
 		device_init_wakeup(&pdev->dev, 1);
 
+	adc_jack_handler(&data->handler.work);
 	return 0;
 }
 

drivers/extcon/extcon-arizona.c

@@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 		if (clamp)
 			val = ARIZONA_RMV_SHRT_HP1L;
 		break;
-	};
+	}
 
 	snd_soc_dapm_mutex_lock(arizona->dapm);
 
@@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 					 info->micd_ranges[i].key, 0);
 		input_sync(info->input);
 
-		ret = extcon_update_state(info->edev, 0xffffffff, 0);
+		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+			ret = extcon_set_cable_state_(info->edev,
+					arizona_cable[i], false);
 			if (ret != 0)
-			dev_err(arizona->dev, "Removal report failed: %d\n",
-				ret);
+				dev_err(arizona->dev,
+					"Removal report failed: %d\n", ret);
+		}
 
 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,

drivers/extcon/extcon-gpio.c

@@ -49,7 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
-	extcon_set_state(data->edev, state);
+	extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)

include/linux/extcon.h

@@ -28,6 +28,15 @@
 
 #include <linux/device.h>
 
+/*
+ * Define the type of supported external connectors
+ */
+#define EXTCON_TYPE_USB		BIT(0)	/* USB connector */
+#define EXTCON_TYPE_CHG		BIT(1)	/* Charger connector */
+#define EXTCON_TYPE_JACK	BIT(2)	/* Jack connector */
+#define EXTCON_TYPE_DISP	BIT(3)	/* Display connector */
+#define EXTCON_TYPE_MISC	BIT(4)	/* Miscellaneous connector */
+
 /*
  * Define the unique id of supported external connectors
  */
@@ -44,6 +53,7 @@
 #define EXTCON_CHG_USB_ACA	8	/* Accessory Charger Adapter */
 #define EXTCON_CHG_USB_FAST	9
 #define EXTCON_CHG_USB_SLOW	10
+#define EXTCON_CHG_WPT		11	/* Wireless Power Transfer */
 
 /* Jack external connector */
 #define EXTCON_JACK_MICROPHONE	20
@@ -60,6 +70,8 @@
 #define EXTCON_DISP_MHL		41	/* Mobile High-Definition Link */
 #define EXTCON_DISP_DVI		42	/* Digital Visual Interface */
 #define EXTCON_DISP_VGA		43	/* Video Graphics Array */
+#define EXTCON_DISP_DP		44	/* Display Port */
+#define EXTCON_DISP_HMD		45	/* Head-Mounted Display */
 
 /* Miscellaneous external connector */
 #define EXTCON_DOCK		60
@@ -68,6 +80,74 @@
 
 #define EXTCON_NUM		63
 
+/*
+ * Define the property of supported external connectors.
+ *
+ * When adding the new extcon property, they *must* have
+ * the type/value/default information. Also, you *have to*
+ * modify the EXTCON_PROP_[type]_START/END definitions
+ * which mean the range of the supported properties
+ * for each extcon type.
+ *
+ * The naming style of property
+ * : EXTCON_PROP_[type]_[property name]
+ *
+ * EXTCON_PROP_USB_[property name]	: USB property
+ * EXTCON_PROP_CHG_[property name]	: Charger property
+ * EXTCON_PROP_JACK_[property name]	: Jack property
+ * EXTCON_PROP_DISP_[property name]	: Display property
+ */
+
+/*
+ * Properties of EXTCON_TYPE_USB.
+ *
+ * - EXTCON_PROP_USB_VBUS
+ * @type:	integer (intval)
+ * @value:	0 (low) or 1 (high)
+ * @default:	0 (low)
+ * - EXTCON_PROP_USB_TYPEC_POLARITY
+ * @type:	integer (intval)
+ * @value:	0 (normal) or 1 (flip)
+ * @default:	0 (normal)
+ * - EXTCON_PROP_USB_SS (SuperSpeed)
+ * @type:       integer (intval)
+ * @value:      0 (USB/USB2) or 1 (USB3)
+ * @default:    0 (USB/USB2)
+ *
+ */
+#define EXTCON_PROP_USB_VBUS		0
+#define EXTCON_PROP_USB_TYPEC_POLARITY	1
+#define EXTCON_PROP_USB_SS		2
+
+#define EXTCON_PROP_USB_MIN		0
+#define EXTCON_PROP_USB_MAX		2
+#define EXTCON_PROP_USB_CNT	(EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
+
+/* Properties of EXTCON_TYPE_CHG. */
+#define EXTCON_PROP_CHG_MIN		50
+#define EXTCON_PROP_CHG_MAX		50
+#define EXTCON_PROP_CHG_CNT	(EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1)
+
+/* Properties of EXTCON_TYPE_JACK. */
+#define EXTCON_PROP_JACK_MIN		100
+#define EXTCON_PROP_JACK_MAX		100
+#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1)
+
+/* Properties of EXTCON_TYPE_DISP. */
+#define EXTCON_PROP_DISP_MIN		150
+#define EXTCON_PROP_DISP_MAX		150
+#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1)
+
+/*
+ * Define the type of property's value.
+ *
+ * Define the property's value as union type. Because each property
+ * would need the different data type to store it.
+ */
+union extcon_property_value {
+	int intval;	/* type : integer (intval) */
+};
+
 struct extcon_cable;
 
 /**
@@ -150,26 +230,43 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 
 /*
- * get/set/update_state access the 32b encoded state value, which represents
- * states of all possible cables of the multistate port. For example, if one
- * calls extcon_set_state(edev, 0x7), it may mean that all the three cables
- * are attached to the port.
+ * get/set_state access each bit of the 32b encoded state value.
+ * They are used to access the status of each cable based on the cable id.
  */
-static inline u32 extcon_get_state(struct extcon_dev *edev)
-{
-	return edev->state;
-}
+extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
+extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				   bool cable_state);
+extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state);
 
-extern int extcon_set_state(struct extcon_dev *edev, u32 state);
-extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
+/*
+ * Synchronize the state and property data for a specific external connector.
+ */
+extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
 
 /*
- * get/set_cable_state access each bit of the 32b encoded state value.
- * They are used to access the status of each cable based on the cable id.
+ * get/set_property access the property value of each external connector.
+ * They are used to access the property of each cable based on the property id.
  */
-extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
-				   bool cable_state);
+extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val);
+extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+
+/*
+ * get/set_property_capability set the capability of the property for each
+ * external connector. They are used to set the capability of the property
+ * of each external connector based on the id and property.
+ */
+extern int extcon_get_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
+extern int extcon_set_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
 
 /*
  * Following APIs are to monitor every action of a notifier.
@@ -232,30 +329,57 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 
 static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
 
-static inline u32 extcon_get_state(struct extcon_dev *edev)
+
+static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
+{
+	return 0;
+}
+
+static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
+{
+	return 0;
+}
+
+static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
 	return 0;
 }
 
-static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
+static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
+{
+	return 0;
+}
+
+static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value *prop_val)
+{
+	return 0;
+}
+static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value prop_val)
 {
 	return 0;
 }
 
-static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
-				       u32 state)
+static inline int extcon_set_property_sync(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop,
+					union extcon_property_value prop_val)
 {
 	return 0;
 }
 
-static inline int extcon_get_cable_state_(struct extcon_dev *edev,
-					  unsigned int id)
+static inline int extcon_get_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
 {
 	return 0;
 }
 
-static inline int extcon_set_cable_state_(struct extcon_dev *edev,
-					  unsigned int id, bool cable_state)
+static inline int extcon_set_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
 {
 	return 0;
 }
@@ -320,4 +444,15 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
 {
 	return -EINVAL;
 }
+
+static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id)
+{
+	return extcon_get_state(edev, id);
+}
+
+static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+				   bool cable_state)
+{
+	return extcon_set_state_sync(edev, id, cable_state);
+}
 #endif /* __LINUX_EXTCON_H__ */

include/linux/extcon/extcon-adc-jack.h

@@ -20,8 +20,8 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state:		the corresponding extcon state (if 0, this struct
  *			denotes the last adc_jack_cond element among the array)
+ * @id:			the unique id of each external connector
  * @min_adc:		min adc value for this condition
  * @max_adc:		max adc value for this condition
  *
@@ -33,7 +33,7 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state;	/* extcon state value. 0 if invalid */
+	unsigned int id;
 	u32 min_adc;
 	u32 max_adc;
 };