Skip to content

L
linux
Commit 34b02dcd authored by James Smart's avatar James Smart Committed by James Bottomley
Browse files
Options

[SCSI] lpfc 8.2.8 : Update driver for new SLI-3 features 

Update driver for new SLI-3 features:
- interrupt enhancements
- lose adapter doorbell writes
- inlining support for FCP_Ixx cmds
Signed-off-by: default avatarJames Smart <james.smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 90160e01
Show whitespace changes
Inline Side-by-side
Showing with 314 additions and 219 deletions
drivers/scsi/lpfc/lpfc.h
View file @ 34b02dcd
......@@ -407,10 +407,11 @@ struct lpfc_hba {
struct lpfc_sli sli;
uint32_t sli_rev; /* SLI2 or SLI3 */
uint32_t sli3_options; /* Mask of enabled SLI3 options */
#define LPFC_SLI3_ENABLED 0x01
#define LPFC_SLI3_HBQ_ENABLED 0x02
#define LPFC_SLI3_NPIV_ENABLED 0x04
#define LPFC_SLI3_VPORT_TEARDOWN 0x08
#define LPFC_SLI3_HBQ_ENABLED 0x01
#define LPFC_SLI3_NPIV_ENABLED 0x02
#define LPFC_SLI3_VPORT_TEARDOWN 0x04
#define LPFC_SLI3_CRP_ENABLED 0x08
#define LPFC_SLI3_INB_ENABLED 0x10
uint32_t iocb_cmd_size;
uint32_t iocb_rsp_size;
......@@ -422,10 +423,16 @@ struct lpfc_hba {
#define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
#define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
struct lpfc_sli2_slim *slim2p;
struct lpfc_dmabuf hbqslimp;
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
uint32_t *inb_ha_copy;
uint32_t *inb_counter;
uint32_t inb_last_counter;
struct _PCB *pcb;
struct _IOCB *IOCBs;
dma_addr_t slim2p_mapping;
struct lpfc_dmabuf hbqslimp;
uint16_t pci_cfg_value;
......@@ -514,6 +521,7 @@ struct lpfc_hba {
void __iomem *HCregaddr; /* virtual address for host ctl reg */
struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
struct lpfc_pgp *port_gp;
uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */
uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */
......
drivers/scsi/lpfc/lpfc_ct.c
View file @ 34b02dcd
......@@ -212,7 +212,7 @@ lpfc_alloc_ct_rsp(struct lpfc_hba *phba, int cmdcode, struct ulp_bde64 *bpl,
else
list_add_tail(&mp->list, &mlist->list);
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
/* build buffer ptr list for IOCB */
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
......@@ -283,7 +283,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
icmd->un.genreq64.bdl.ulpIoTag32 = 0;
icmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
icmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys);
icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BDL;
icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof (struct ulp_bde64));
if (usr_flg)
......
drivers/scsi/lpfc/lpfc_debugfs.c
View file @ 34b02dcd
......@@ -454,7 +454,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
spin_lock_irq(&phba->hbalock);
len += snprintf(buf+len, size-len, "SLIM Mailbox\n");
ptr = (uint32_t *)phba->slim2p;
ptr = (uint32_t *)phba->slim2p.virt;
i = sizeof(MAILBOX_t);
while (i > 0) {
len += snprintf(buf+len, size-len,
......@@ -467,7 +467,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
}
len += snprintf(buf+len, size-len, "SLIM PCB\n");
ptr = (uint32_t *)&phba->slim2p->pcb;
ptr = (uint32_t *)phba->pcb;
i = sizeof(PCB_t);
while (i > 0) {
len += snprintf(buf+len, size-len,
......@@ -479,44 +479,16 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
off += (8 * sizeof(uint32_t));
}
pgpp = (struct lpfc_pgp *)&phba->slim2p->mbx.us.s3_pgp.port;
pring = &psli->ring[0];
for (i = 0; i < 4; i++) {
pgpp = &phba->port_gp[i];
pring = &psli->ring[i];
len += snprintf(buf+len, size-len,
"Ring 0: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
"RSP PutInx:%d Max:%d\n",
pgpp->cmdGetInx, pring->numCiocb,
pring->next_cmdidx, pring->local_getidx, pring->flag,
pgpp->rspPutInx, pring->numRiocb);
pgpp++;
pring = &psli->ring[1];
len += snprintf(buf+len, size-len,
"Ring 1: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
"RSP PutInx:%d Max:%d\n",
pgpp->cmdGetInx, pring->numCiocb,
pring->next_cmdidx, pring->local_getidx, pring->flag,
pgpp->rspPutInx, pring->numRiocb);
pgpp++;
pring = &psli->ring[2];
len += snprintf(buf+len, size-len,
"Ring 2: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
"RSP PutInx:%d Max:%d\n",
pgpp->cmdGetInx, pring->numCiocb,
pring->next_cmdidx, pring->local_getidx, pring->flag,
pgpp->rspPutInx, pring->numRiocb);
pgpp++;
pring = &psli->ring[3];
len += snprintf(buf+len, size-len,
"Ring 3: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) "
"RSP PutInx:%d Max:%d\n",
pgpp->cmdGetInx, pring->numCiocb,
pring->next_cmdidx, pring->local_getidx, pring->flag,
pgpp->rspPutInx, pring->numRiocb);
ptr = (uint32_t *)&phba->slim2p->mbx.us.s3_pgp.hbq_get;
"Ring %d: CMD GetInx:%d (Max:%d Next:%d "
"Local:%d flg:x%x) RSP PutInx:%d Max:%d\n",
i, pgpp->cmdGetInx, pring->numCiocb,
pring->next_cmdidx, pring->local_getidx,
pring->flag, pgpp->rspPutInx, pring->numRiocb);
}
word0 = readl(phba->HAregaddr);
word1 = readl(phba->CAregaddr);
word2 = readl(phba->HSregaddr);
......
drivers/scsi/lpfc/lpfc_els.c
View file @ 34b02dcd
......@@ -200,7 +200,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BDL;
icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.elsreq64.remoteID = did; /* DID */
if (expectRsp) {
icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
......@@ -235,7 +235,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
bpl->addrLow = le32_to_cpu(putPaddrLow(prsp->phys));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(prsp->phys));
bpl->tus.f.bdeSize = FCELSSIZE;
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
}
......
drivers/scsi/lpfc/lpfc_hw.h
View file @ 34b02dcd
......@@ -1474,24 +1474,18 @@ struct ulp_bde64 { /* SLI-2 */
uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
VALUE !! */
#endif
#define BUFF_USE_RSVD 0x01 /* bdeFlags */
#define BUFF_USE_INTRPT 0x02 /* Not Implemented with LP6000 */
#define BUFF_USE_CMND 0x04 /* Optional, 1=cmd/rsp 0=data buffer */
#define BUFF_USE_RCV 0x08 /* "" "", 1=rcv buffer, 0=xmit
buffer */
#define BUFF_TYPE_32BIT 0x10 /* "" "", 1=32 bit addr 0=64 bit
addr */
#define BUFF_TYPE_SPECIAL 0x20 /* Not Implemented with LP6000 */
#define BUFF_TYPE_BDL 0x40 /* Optional, may be set in BDL */
#define BUFF_TYPE_INVALID 0x80 /* "" "" */
#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
} f;
} tus;
uint32_t addrLow;
uint32_t addrHigh;
};
#define BDE64_SIZE_WORD 0
#define BPL64_SIZE_WORD 0x40
typedef struct ULP_BDL { /* SLI-2 */
#ifdef __BIG_ENDIAN_BITFIELD
......@@ -2715,11 +2709,19 @@ struct sli3_pgp {
uint32_t hbq_get[16];
};
typedef union {
struct sli3_inb_pgp {
uint32_t ha_copy;
uint32_t counter;
struct lpfc_pgp port[MAX_RINGS];
uint32_t hbq_get[16];
};
union sli_var {
struct sli2_desc s2;
struct sli3_desc s3;
struct sli3_pgp s3_pgp;
} SLI_VAR;
struct sli3_inb_pgp s3_inb_pgp;
};
typedef struct {
#ifdef __BIG_ENDIAN_BITFIELD
......@@ -2737,7 +2739,7 @@ typedef struct {
#endif
MAILVARIANTS un;
SLI_VAR us;
union sli_var us;
} MAILBOX_t;
/*
......@@ -3105,6 +3107,27 @@ struct que_xri64cx_ext_fields {
struct lpfc_hbq_entry buff[5];
};
#define LPFC_EXT_DATA_BDE_COUNT 3
struct fcp_irw_ext {
uint32_t io_tag64_low;
uint32_t io_tag64_high;
#ifdef __BIG_ENDIAN_BITFIELD
uint8_t reserved1;
uint8_t reserved2;
uint8_t reserved3;
uint8_t ebde_count;
#else /* __LITTLE_ENDIAN */
uint8_t ebde_count;
uint8_t reserved3;
uint8_t reserved2;
uint8_t reserved1;
#endif
uint32_t reserved4;
struct ulp_bde64 rbde; /* response bde */
struct ulp_bde64 dbde[LPFC_EXT_DATA_BDE_COUNT]; /* data BDE or BPL */
uint8_t icd[32]; /* immediate command data (32 bytes) */
};
typedef struct _IOCB { /* IOCB structure */
union {
GENERIC_RSP grsp; /* Generic response */
......@@ -3190,7 +3213,7 @@ typedef struct _IOCB { /* IOCB structure */
/* words 8-31 used for que_xri_cx iocb */
struct que_xri64cx_ext_fields que_xri64cx_ext_words;
struct fcp_irw_ext fcp_ext;
uint32_t sli3Words[24]; /* 96 extra bytes for SLI-3 */
} unsli3;
......
drivers/scsi/lpfc/lpfc_init.c
View file @ 34b02dcd
......@@ -2312,12 +2312,18 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
}
/* Allocate memory for SLI-2 structures */
phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
&phba->slim2p_mapping, GFP_KERNEL);
if (!phba->slim2p)
phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
SLI2_SLIM_SIZE,
&phba->slim2p.phys,
GFP_KERNEL);
if (!phba->slim2p.virt)
goto out_iounmap;
memset(phba->slim2p, 0, SLI2_SLIM_SIZE);
memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
phba->mbox = phba->slim2p.virt;
phba->pcb = (phba->slim2p.virt + sizeof(MAILBOX_t));
phba->IOCBs = (phba->slim2p.virt + sizeof(MAILBOX_t) +
sizeof(struct _PCB));
phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
lpfc_sli_hbq_size(),
......@@ -2513,11 +2519,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
}
lpfc_mem_free(phba);
out_free_hbqslimp:
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt,
phba->hbqslimp.phys);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
out_free_slim:
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p,
phba->slim2p_mapping);
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p.virt, phba->slim2p.phys);
out_iounmap:
iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
......@@ -2599,12 +2605,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
lpfc_scsi_free(phba);
lpfc_mem_free(phba);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt,
phba->hbqslimp.phys);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
/* Free resources associated with SLI2 interface */
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p, phba->slim2p_mapping);
phba->slim2p.virt, phba->slim2p.phys);
/* unmap adapter SLIM and Control Registers */
iounmap(phba->ctrl_regs_memmap_p);
......
drivers/scsi/lpfc/lpfc_mbox.c
View file @ 34b02dcd
......@@ -671,7 +671,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
PCB_t *pcbp = &phba->slim2p->pcb;
PCB_t *pcbp = phba->pcb;
dma_addr_t pdma_addr;
uint32_t offset;
uint32_t iocbCnt = 0;
......@@ -700,23 +700,23 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
continue;
}
/* Command ring setup for ring */
pring->cmdringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt];
pring->cmdringaddr = (void *)&phba->IOCBs[iocbCnt];
pcbp->rdsc[i].cmdEntries = pring->numCiocb;
offset = (uint8_t *) &phba->slim2p->IOCBs[iocbCnt] -
(uint8_t *) phba->slim2p;
pdma_addr = phba->slim2p_mapping + offset;
offset = (uint8_t *) &phba->IOCBs[iocbCnt] -
(uint8_t *) phba->slim2p.virt;
pdma_addr = phba->slim2p.phys + offset;
pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr);
pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr);
iocbCnt += pring->numCiocb;
/* Response ring setup for ring */
pring->rspringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt];
pring->rspringaddr = (void *) &phba->IOCBs[iocbCnt];
pcbp->rdsc[i].rspEntries = pring->numRiocb;
offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] -
(uint8_t *)phba->slim2p;
pdma_addr = phba->slim2p_mapping + offset;
offset = (uint8_t *)&phba->IOCBs[iocbCnt] -
(uint8_t *)phba->slim2p.virt;
pdma_addr = phba->slim2p.phys + offset;
pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr);
pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr);
iocbCnt += pring->numRiocb;
......@@ -977,8 +977,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
mb->un.varCfgPort.pcbLen = sizeof(PCB_t);
offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p;
pdma_addr = phba->slim2p_mapping + offset;
offset = (uint8_t *)phba->pcb - (uint8_t *)phba->slim2p.virt;
pdma_addr = phba->slim2p.phys + offset;
mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr);
mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr);
......@@ -986,12 +986,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
if (phba->max_vpi && phba->cfg_enable_npiv &&
phba->vpd.sli3Feat.cmv) {
mb->un.varCfgPort.max_vpi = phba->max_vpi;
mb->un.varCfgPort.cmv = 1;
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
} else
mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
} else
......@@ -999,16 +1000,15 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
mb->un.varCfgPort.sli_mode = phba->sli_rev;
/* Now setup pcb */
phba->slim2p->pcb.type = TYPE_NATIVE_SLI2;
phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2;
phba->pcb->type = TYPE_NATIVE_SLI2;
phba->pcb->feature = FEATURE_INITIAL_SLI2;
/* Setup Mailbox pointers */
phba->slim2p->pcb.mailBoxSize = offsetof(MAILBOX_t, us) +
sizeof(struct sli2_desc);
offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p;
pdma_addr = phba->slim2p_mapping + offset;
phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr);
phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr);
phba->pcb->mailBoxSize = sizeof(MAILBOX_t);
offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt;
pdma_addr = phba->slim2p.phys + offset;
phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr);
phba->pcb->mbAddrLow = putPaddrLow(pdma_addr);
/*
* Setup Host Group ring pointer.
......@@ -1069,13 +1069,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/* mask off BAR0's flag bits 0 - 3 */
phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) +
(void __iomem *) phba->host_gp -
phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) +
(void __iomem *)phba->host_gp -
(void __iomem *)phba->MBslimaddr;
if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64)
phba->slim2p->pcb.hgpAddrHigh = bar_high;
phba->pcb->hgpAddrHigh = bar_high;
else
phba->slim2p->pcb.hgpAddrHigh = 0;
phba->pcb->hgpAddrHigh = 0;
/* write HGP data to SLIM at the required longword offset */
memset(&hgp, 0, sizeof(struct lpfc_hgp));
......@@ -1085,17 +1085,19 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/* Setup Port Group ring pointer */
if (phba->sli_rev == 3)
pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s3_pgp.port -
(uint8_t *)phba->slim2p;
else
pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port -
(uint8_t *)phba->slim2p;
pdma_addr = phba->slim2p_mapping + pgp_offset;
phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr);
phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr);
phba->hbq_get = &phba->slim2p->mbx.us.s3_pgp.hbq_get[0];
if (phba->sli3_options & LPFC_SLI3_INB_ENABLED) {
pgp_offset = offsetof(struct lpfc_sli2_slim,
mbx.us.s3_inb_pgp.port);
phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
} else if (phba->sli_rev == 3) {
pgp_offset = offsetof(struct lpfc_sli2_slim,
mbx.us.s3_pgp.port);
phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get;
} else
pgp_offset = offsetof(struct lpfc_sli2_slim, mbx.us.s2.port);
pdma_addr = phba->slim2p.phys + pgp_offset;
phba->pcb->pgpAddrHigh = putPaddrHigh(pdma_addr);
phba->pcb->pgpAddrLow = putPaddrLow(pdma_addr);
/* Use callback routine to setp rings in the pcb */
lpfc_config_pcb_setup(phba);
......@@ -1110,8 +1112,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/* Swap PCB if needed */
lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb,
sizeof(PCB_t));
lpfc_sli_pcimem_bcopy(phba->pcb, phba->pcb, sizeof(PCB_t));
}
/**
......
drivers/scsi/lpfc/lpfc_scsi.c
View file @ 34b02dcd
......@@ -198,7 +198,9 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
struct lpfc_scsi_buf *psb;
struct ulp_bde64 *bpl;
IOCB_t *iocb;
dma_addr_t pdma_phys;
dma_addr_t pdma_phys_fcp_cmd;
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
......@@ -238,40 +240,60 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
/* Initialize local short-hand pointers. */
bpl = psb->fcp_bpl;
pdma_phys = psb->dma_handle;
pdma_phys_fcp_cmd = psb->dma_handle;
pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp);
/*
* The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
* list bdes. Initialize the first two and leave the rest for
* queuecommand.
*/
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd);
bpl->tus.f.bdeFlags = BUFF_USE_CMND;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl[0].tus.w = le32_to_cpu(bpl->tus.w);
/* Setup the physical region for the FCP RSP */
pdma_phys += sizeof (struct fcp_cmnd);
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
bpl->tus.f.bdeSize = sizeof (struct fcp_rsp);
bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV);
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl[1].tus.w = le32_to_cpu(bpl->tus.w);
/*
* Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
* initialize it with all known data now.
*/
pdma_phys += (sizeof (struct fcp_rsp));
iocb = &psb->cur_iocbq.iocb;
iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys);
iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys);
iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL;
if (phba->sli_rev == 3) {
/* fill in immediate fcp command BDE */
iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
unsli3.fcp_ext.icd);
iocb->un.fcpi64.bdl.addrHigh = 0;
iocb->ulpBdeCount = 0;
iocb->ulpLe = 0;
/* fill in responce BDE */
iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
sizeof(struct fcp_rsp);
iocb->unsli3.fcp_ext.rbde.addrLow =
putPaddrLow(pdma_phys_fcp_rsp);
iocb->unsli3.fcp_ext.rbde.addrHigh =
putPaddrHigh(pdma_phys_fcp_rsp);
} else {
iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
iocb->ulpBdeCount = 1;
iocb->ulpLe = 1;
}
iocb->ulpClass = CLASS3;
return psb;
......@@ -313,8 +335,9 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
dma_addr_t physaddr;
uint32_t i, num_bde = 0;
uint32_t num_bde = 0;
int nseg, datadir = scsi_cmnd->sc_data_direction;
/*
......@@ -352,33 +375,64 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* during probe that limits the number of sg elements in any
* single scsi command. Just run through the seg_cnt and format
* the bde's.
* When using SLI-3 the driver will try to fit all the BDEs into
* the IOCB. If it can't then the BDEs get added to a BPL as it
* does for SLI-2 mode.
*/
scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) {
scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
physaddr = sg_dma_address(sgel);
bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
if (phba->sli_rev == 3 &&
nseg <= LPFC_EXT_DATA_BDE_COUNT) {
data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
data_bde->tus.f.bdeSize = sg_dma_len(sgel);
data_bde->addrLow = putPaddrLow(physaddr);
data_bde->addrHigh = putPaddrHigh(physaddr);
data_bde++;
} else {
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl->tus.f.bdeSize = sg_dma_len(sgel);
if (datadir == DMA_TO_DEVICE)
bpl->tus.f.bdeFlags = 0;
else
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl->addrLow =
le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh =
le32_to_cpu(putPaddrHigh(physaddr));
bpl++;
num_bde++;
}
}
}
/*
* Finish initializing those IOCB fields that are dependent on the
* scsi_cmnd request_buffer. Note that the bdeSize is explicitly
* reinitialized since all iocb memory resources are used many times
* for transmit, receive, and continuation bpl's.
* scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
* explicitly reinitialized and for SLI-3 the extended bde count is
* explicitly reinitialized since all iocb memory resources are reused.
*/
if (phba->sli_rev == 3) {
if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
/*
* The extended IOCB format can only fit 3 BDE or a BPL.
* This I/O has more than 3 BDE so the 1st data bde will
* be a BPL that is filled in here.
*/
iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
iocb_cmd->un.fcpi64.bdl.bdeSize +=
(num_bde * sizeof (struct ulp_bde64));
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
physaddr = lpfc_cmd->dma_handle;
data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
data_bde->tus.f.bdeSize = (num_bde *
sizeof(struct ulp_bde64));
physaddr += (sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp) +
(2 * sizeof(struct ulp_bde64)));
data_bde->addrHigh = putPaddrHigh(physaddr);
data_bde->addrLow = putPaddrLow(physaddr);
/* ebde count includes the responce bde and data bpl */
iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
} else {
/* ebde count includes the responce bde and data bdes */
iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
}
} else {
iocb_cmd->un.fcpi64.bdl.bdeSize =
((num_bde + 2) * sizeof(struct ulp_bde64));
}
fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
return 0;
}
......@@ -692,6 +746,24 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
/**
* lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
* @data: A pointer to the immediate command data portion of the IOCB.
* @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
*
* The routine copies the entire FCP command from @fcp_cmnd to @data while
* byte swapping the data to big endian format for transmission on the wire.
**/
static void
lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
{
int i, j;
for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
i += sizeof(uint32_t), j++) {
((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
}
}
static void
lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
......@@ -758,7 +830,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
fcp_cmnd->fcpCntl3 = 0;
phba->fc4ControlRequests++;
}
if (phba->sli_rev == 3)
lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
/*
* Finish initializing those IOCB fields that are independent
* of the scsi_cmnd request_buffer
......@@ -798,11 +871,13 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
piocb = &piocbq->iocb;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun);
/* Clear out any old data in the FCP command area */
memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
if (vport->phba->sli_rev == 3)
lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
piocb->ulpContext = ndlp->nlp_rpi;
if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
piocb->ulpFCP2Rcvy = 1;
......
drivers/scsi/lpfc/lpfc_sli.c
View file @ 34b02dcd
......@@ -406,11 +406,8 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
static IOCB_t *
lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
&phba->slim2p->mbx.us.s2.port[pring->ringno];
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
uint32_t max_cmd_idx = pring->numCiocb;
if ((pring->next_cmdidx == pring->cmdidx) &&
(++pring->next_cmdidx >= max_cmd_idx))
pring->next_cmdidx = 0;
......@@ -625,9 +622,11 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
/*
* Tell the HBA that there is work to do in this ring.
*/
if (!(phba->sli3_options & LPFC_SLI3_CRP_ENABLED)) {
wmb();
writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
readl(phba->CAregaddr); /* flush */
}
}
/**
......@@ -1654,9 +1653,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
static void
lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
&phba->slim2p->mbx.us.s2.port[pring->ringno];
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
/*
* Ring <ringno> handler: portRspPut <portRspPut> is bigger then
* rsp ring <portRspMax>
......@@ -1704,7 +1701,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
IOCB_t *entry = NULL;
struct lpfc_iocbq *cmdiocbq = NULL;
struct lpfc_iocbq rspiocbq;
struct lpfc_pgp *pgp;
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
uint32_t status;
uint32_t portRspPut, portRspMax;
int type;
......@@ -1714,11 +1711,6 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
pring->stats.iocb_event++;
pgp = (phba->sli_rev == 3) ?
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
&phba->slim2p->mbx.us.s2.port[pring->ringno];
/*
* The next available response entry should never exceed the maximum
* entries. If it does, treat it as an adapter hardware error.
......@@ -1870,9 +1862,7 @@ static int
lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
&phba->slim2p->mbx.us.s2.port[pring->ringno];
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
IOCB_t *irsp = NULL;
IOCB_t *entry = NULL;
struct lpfc_iocbq *cmdiocbq = NULL;
......@@ -2064,9 +2054,7 @@ int
lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
&phba->slim2p->mbx.us.s2.port[pring->ringno];
struct lpfc_pgp *pgp;
IOCB_t *entry;
IOCB_t *irsp = NULL;
struct lpfc_iocbq *rspiocbp = NULL;
......@@ -2080,6 +2068,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
int rc = 1;
unsigned long iflag;
pgp = &phba->port_gp[pring->ringno];
spin_lock_irqsave(&phba->hbalock, iflag);
pring->stats.iocb_event++;
......@@ -2990,13 +2979,15 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode)
if (rc == -ERESTART) {
phba->link_state = LPFC_LINK_UNKNOWN;
continue;
} else if (rc) {
} else if (rc)
break;
}
phba->link_state = LPFC_INIT_MBX_CMDS;
lpfc_config_port(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
LPFC_SLI3_HBQ_ENABLED |
LPFC_SLI3_CRP_ENABLED |
LPFC_SLI3_INB_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
......@@ -3006,25 +2997,44 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode)
phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
spin_unlock_irq(&phba->hbalock);
rc = -ENXIO;
} else {
} else
done = 1;
phba->max_vpi = (phba->max_vpi &&
pmb->mb.un.varCfgPort.gmv) != 0
? pmb->mb.un.varCfgPort.max_vpi
: 0;
}
}
if (!done) {
rc = -EINVAL;
goto do_prep_failed;
}
if ((pmb->mb.un.varCfgPort.sli_mode == 3) &&
(!pmb->mb.un.varCfgPort.cMA)) {
if (pmb->mb.un.varCfgPort.sli_mode == 3) {
if (!pmb->mb.un.varCfgPort.cMA) {
rc = -ENXIO;
goto do_prep_failed;
}
if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
} else
phba->max_vpi = 0;
if (pmb->mb.un.varCfgPort.gerbm)
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
if (pmb->mb.un.varCfgPort.gcrp)
phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
if (pmb->mb.un.varCfgPort.ginb) {
phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
phba->inb_ha_copy = &phba->mbox->us.s3_inb_pgp.ha_copy;
phba->inb_counter = &phba->mbox->us.s3_inb_pgp.counter;
phba->inb_last_counter =
phba->mbox->us.s3_inb_pgp.counter;
} else {
phba->port_gp = phba->mbox->us.s3_pgp.port;
phba->inb_ha_copy = NULL;
phba->inb_counter = NULL;
}
} else {
phba->port_gp = phba->mbox->us.s2.port;
phba->inb_ha_copy = NULL;
phba->inb_counter = NULL;
}
do_prep_failed:
mempool_free(pmb, phba->mbox_mem_pool);
return rc;
......@@ -3085,9 +3095,6 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
if (phba->sli_rev == 3) {
phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
phba->sli3_options |= LPFC_SLI3_ENABLED;
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
} else {
phba->iocb_cmd_size = SLI2_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI2_IOCB_RSP_SIZE;
......@@ -3255,7 +3262,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
int i;
unsigned long timeout;
unsigned long drvr_flag = 0;
volatile uint32_t word0, ldata;
uint32_t word0, ldata;
void __iomem *to_slim;
int processing_queue = 0;
......@@ -3415,12 +3422,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First copy command data to host SLIM area */
lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
} else {
if (mb->mbxCommand == MBX_CONFIG_PORT) {
/* copy command data into host mbox for cmpl */
lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
MAILBOX_CMD_SIZE);
lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
}
/* First copy mbox command data to HBA SLIM, skip past first
......@@ -3430,7 +3436,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
MAILBOX_CMD_SIZE - sizeof (uint32_t));
/* Next copy over first word, with mbxOwner set */
ldata = *((volatile uint32_t *)mb);
ldata = *((uint32_t *)mb);
to_slim = phba->MBslimaddr;
writel(ldata, to_slim);
readl(to_slim); /* flush */
......@@ -3462,7 +3468,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First read mbox status word */
word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
} else {
/* First read mbox status word */
......@@ -3501,12 +3507,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First copy command data */
word0 = *((volatile uint32_t *)
&phba->slim2p->mbx);
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
if (mb->mbxCommand == MBX_CONFIG_PORT) {
MAILBOX_t *slimmb;
volatile uint32_t slimword0;
uint32_t slimword0;
/* Check real SLIM for any errors */
slimword0 = readl(phba->MBslimaddr);
slimmb = (MAILBOX_t *) & slimword0;
......@@ -3527,8 +3532,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* copy results back to user */
lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
MAILBOX_CMD_SIZE);
lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
} else {
/* First copy command data */
lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
......@@ -5095,7 +5099,16 @@ lpfc_intr_handler(int irq, void *dev_id)
* preserve status) and Link Attention
*/
spin_lock(&phba->hbalock);
if (phba->sli3_options & LPFC_SLI3_INB_ENABLED &&
(phba->inb_last_counter != *phba->inb_counter)) {
phba->inb_last_counter = *phba->inb_counter;
ha_copy = le32_to_cpu(*phba->inb_ha_copy);
} else
ha_copy = readl(phba->HAregaddr);
if (unlikely(!ha_copy)) {
spin_unlock(&phba->hbalock);
return IRQ_NONE;
}
/* If somebody is waiting to handle an eratt don't process it
* here. The brdkill function will do this.
*/
......@@ -5105,9 +5118,6 @@ lpfc_intr_handler(int irq, void *dev_id)
readl(phba->HAregaddr); /* flush */
spin_unlock(&phba->hbalock);
if (unlikely(!ha_copy))
return IRQ_NONE;
work_ha_copy = ha_copy & phba->work_ha_mask;
if (unlikely(work_ha_copy)) {
......@@ -5194,7 +5204,7 @@ lpfc_intr_handler(int irq, void *dev_id)
(phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
mbox = &phba->slim2p->mbx;
mbox = phba->mbox;
vport = pmb->vport;
/* First check out the status word */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7