Skip to content

L
linux
Commit 36213116 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Boris Brezillon
Browse files
Options

mtd: onenand: omap2: Simplify the DMA setup for various paths 

We have 4 functions containing almost identical DMA setup code. Create one
function which can set up the DMA for both read and write and use this in
place for the setup code in the driver.
The new function will use wait_for_completion_io_timeout() and it will
figure out the best data_type to be used for the transfer instead of
hardwiring 32 or 16 bit data.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarLadislav Michl <ladis@linux-mips.org>
Reviewed-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: default avatarRoger Quadros <rogerq@ti.com>
Tested-by: default avatarTony Lindgren <tony@atomide.com>
Tested-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent d1205688
Show whitespace changes
Inline Side-by-side
Showing with 45 additions and 64 deletions
drivers/mtd/onenand/omap2.c
View file @ 36213116
......@@ -288,6 +288,33 @@ static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
return 0;
}
static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c,
dma_addr_t src, dma_addr_t dst,
size_t count)
{
int data_type = __ffs((src | dst | count));
if (data_type > OMAP_DMA_DATA_TYPE_S32)
data_type = OMAP_DMA_DATA_TYPE_S32;
omap_set_dma_transfer_params(c->dma_channel, data_type,
count / BIT(data_type), 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dst, 0, 0);
reinit_completion(&c->dma_done);
omap_start_dma(c->dma_channel);
if (!wait_for_completion_io_timeout(&c->dma_done,
msecs_to_jiffies(20))) {
omap_stop_dma(c->dma_channel);
return -ETIMEDOUT;
}
return 0;
}
#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
......@@ -298,10 +325,9 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
unsigned long timeout;
void *buf = (void *)buffer;
size_t xtra;
volatile unsigned *done;
int ret;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
......@@ -338,25 +364,10 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
goto out_copy;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count >> 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
reinit_completion(&c->dma_done);
omap_start_dma(c->dma_channel);
timeout = jiffies + msecs_to_jiffies(20);
done = &c->dma_done.done;
while (time_before(jiffies, timeout))
if (*done)
break;
ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count);
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
if (!*done) {
if (ret) {
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
goto out_copy;
}
......@@ -376,9 +387,8 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
unsigned long timeout;
void *buf = (void *)buffer;
volatile unsigned *done;
int ret;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
......@@ -409,25 +419,10 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count >> 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
reinit_completion(&c->dma_done);
omap_start_dma(c->dma_channel);
timeout = jiffies + msecs_to_jiffies(20);
done = &c->dma_done.done;
while (time_before(jiffies, timeout))
if (*done)
break;
ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count);
dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE);
if (!*done) {
if (ret) {
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
goto out_copy;
}
......@@ -466,7 +461,7 @@ static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
int bram_offset, ret;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
......@@ -488,20 +483,13 @@ static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count / 4, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
reinit_completion(&c->dma_done);
omap_start_dma(c->dma_channel);
wait_for_completion(&c->dma_done);
ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count);
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
return 0;
if (ret)
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
return ret;
}
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
......@@ -511,7 +499,7 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
int bram_offset, ret;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
......@@ -533,20 +521,13 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
count / 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
reinit_completion(&c->dma_done);
omap_start_dma(c->dma_channel);
wait_for_completion(&c->dma_done);
ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count);
dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE);
return 0;
if (ret)
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
return ret;
}
#else
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7