drm/i915: Add the support of eDP on DP-D for Ibex/CPT

This one adds support for eDP that connected on PCH DP-D port
instead of CPU DP-A port, and only DP-D port could be used for eDP.

https://bugs.freedesktop.org/show_bug.cgi?id=27220Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Jan-Hendrik Zab <jan@jhz.name>
Tested-by: Templar <templar@rshc.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/intel_display.c

@@ -3452,7 +3452,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 				temp |= PIPE_8BPC;
 			else
 				temp |= PIPE_6BPC;
-		} else if (is_edp) {
+		} else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) {
 			switch (dev_priv->edp_bpp/3) {
 			case 8:
 				temp |= PIPE_8BPC;

drivers/gpu/drm/i915/intel_dp.c

@@ -43,6 +43,7 @@
 #define DP_LINK_CONFIGURATION_SIZE	9
 
 #define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
+#define IS_PCH_eDP(dp_priv) ((dp_priv)->has_edp)
 
 struct intel_dp_priv {
 	uint32_t output_reg;
@@ -56,6 +57,7 @@ struct intel_dp_priv {
 	struct intel_encoder *intel_encoder;
 	struct i2c_adapter adapter;
 	struct i2c_algo_dp_aux_data algo;
+	bool has_edp;
 };
 
 static void
@@ -128,8 +130,9 @@ intel_dp_link_required(struct drm_device *dev,
 		       struct intel_encoder *intel_encoder, int pixel_clock)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
 
-	if (IS_eDP(intel_encoder))
+	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
 		return (pixel_clock * dev_priv->edp_bpp) / 8;
 	else
 		return pixel_clock * 3;
@@ -563,14 +566,14 @@ intel_reduce_ratio(uint32_t *num, uint32_t *den)
 }
 
 static void
-intel_dp_compute_m_n(int bytes_per_pixel,
+intel_dp_compute_m_n(int bpp,
 		     int nlanes,
 		     int pixel_clock,
 		     int link_clock,
 		     struct intel_dp_m_n *m_n)
 {
 	m_n->tu = 64;
-	m_n->gmch_m = pixel_clock * bytes_per_pixel;
+	m_n->gmch_m = (pixel_clock * bpp) >> 3;
 	m_n->gmch_n = link_clock * nlanes;
 	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 	m_n->link_m = pixel_clock;
@@ -578,6 +581,28 @@ intel_dp_compute_m_n(int bytes_per_pixel,
 	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
 }
 
+bool intel_pch_has_edp(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+		struct intel_encoder *intel_encoder;
+		struct intel_dp_priv *dp_priv;
+
+		if (!encoder || encoder->crtc != crtc)
+			continue;
+
+		intel_encoder = enc_to_intel_encoder(encoder);
+		dp_priv = intel_encoder->dev_priv;
+
+		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT)
+			return dp_priv->has_edp;
+	}
+	return false;
+}
+
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode)
@@ -587,7 +612,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	struct drm_encoder *encoder;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int lane_count = 4;
+	int lane_count = 4, bpp = 24;
 	struct intel_dp_m_n m_n;
 
 	/*
@@ -605,6 +630,8 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 
 		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
 			lane_count = dp_priv->lane_count;
+			if (IS_PCH_eDP(dp_priv))
+				bpp = dev_priv->edp_bpp;
 			break;
 		}
 	}
@@ -614,7 +641,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	 * the number of bytes_per_pixel post-LUT, which we always
 	 * set up for 8-bits of R/G/B, or 3 bytes total.
 	 */
-	intel_dp_compute_m_n(3, lane_count,
+	intel_dp_compute_m_n(bpp, lane_count,
 			     mode->clock, adjusted_mode->clock, &m_n);
 
 	if (HAS_PCH_SPLIT(dev)) {
@@ -751,13 +778,13 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 	if (mode != DRM_MODE_DPMS_ON) {
 		if (dp_reg & DP_PORT_EN) {
 			intel_dp_link_down(intel_encoder, dp_priv->DP);
-			if (IS_eDP(intel_encoder))
+			if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
 				ironlake_edp_backlight_off(dev);
 		}
 	} else {
 		if (!(dp_reg & DP_PORT_EN)) {
 			intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
-			if (IS_eDP(intel_encoder))
+			if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
 				ironlake_edp_backlight_on(dev);
 		}
 	}
@@ -1291,6 +1318,7 @@ static int intel_dp_get_modes(struct drm_connector *connector)
 	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct drm_device *dev = intel_encoder->enc.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
 	int ret;
 
 	/* We should parse the EDID data and find out if it has an audio sink
@@ -1301,7 +1329,7 @@ static int intel_dp_get_modes(struct drm_connector *connector)
 		return ret;
 
 	/* if eDP has no EDID, try to use fixed panel mode from VBT */
-	if (IS_eDP(intel_encoder)) {
+	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
 		if (dev_priv->panel_fixed_mode != NULL) {
 			struct drm_display_mode *mode;
 			mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
@@ -1386,6 +1414,26 @@ intel_trans_dp_port_sel (struct drm_crtc *crtc)
 	return -1;
 }
 
+/* check the VBT to see whether the eDP is on DP-D port */
+static bool intel_dpd_is_edp(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct child_device_config *p_child;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return false;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		p_child = dev_priv->child_dev + i;
+
+		if (p_child->dvo_port == PORT_IDPD &&
+		    p_child->device_type == DEVICE_TYPE_eDP)
+			return true;
+	}
+	return false;
+}
+
 void
 intel_dp_init(struct drm_device *dev, int output_reg)
 {
@@ -1431,6 +1479,11 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	if (IS_eDP(intel_encoder))
 		intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
 
+	if (HAS_PCH_SPLIT(dev) && (output_reg == PCH_DP_D)) {
+		if (intel_dpd_is_edp(dev))
+			dp_priv->has_edp = true;
+	}
+
 	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = true;
 	connector->doublescan_allowed = 0;
@@ -1479,7 +1532,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	intel_encoder->ddc_bus = &dp_priv->adapter;
 	intel_encoder->hot_plug = intel_dp_hot_plug;
 
-	if (output_reg == DP_A) {
+	if (output_reg == DP_A || IS_PCH_eDP(dp_priv)) {
 		/* initialize panel mode from VBT if available for eDP */
 		if (dev_priv->lfp_lvds_vbt_mode) {
 			dev_priv->panel_fixed_mode =

drivers/gpu/drm/i915/intel_drv.h

@@ -179,6 +179,7 @@ extern void intel_dp_init(struct drm_device *dev, int dp_reg);
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode);
+extern bool intel_pch_has_edp(struct drm_crtc *crtc);
 extern void intel_edp_link_config (struct intel_encoder *, int *, int *);