Commit 385ba629 authored by Matt Roper's avatar Matt Roper

drm/i915: Allow /2 CD2X divider on gen11+

The bspec has just recently been updated with new cdclk values that
require the use of a /2 CD2X divider rather than a /1 divider.  Once we
add the divider selection logic to ICL+ cdclk programming, we have
pretty much the same logic we were already using on CNL, so it's simpler
to drop icl_set_cdclk() completely and reuse cnl_set_cdclk() on gen11+
platforms as well.

v2:
 - Using ICL_CDCLK_CD2X_PIPE_NONE + BXT_CDCLK_CD2X_PIPE(pipe) for TGL is
   correct, but looks really confusing.  Add some TGL_ macros that alias
   these to avoid confusion.  (Ville)
 - Use DIV_ROUND_CLOSEST rather than / when applying the divider. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830004828.19359-1-matthew.d.roper@intel.com
parent 7bff9779
......@@ -1659,10 +1659,23 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
cnl_cdclk_pll_enable(dev_priv, vco);
val = divider | skl_cdclk_decimal(cdclk);
if (INTEL_GEN(dev_priv) >= 12) {
if (pipe == INVALID_PIPE)
val |= TGL_CDCLK_CD2X_PIPE_NONE;
else
val |= TGL_CDCLK_CD2X_PIPE(pipe);
} else if (INTEL_GEN(dev_priv) >= 11) {
if (pipe == INVALID_PIPE)
val |= ICL_CDCLK_CD2X_PIPE_NONE;
else
val |= ICL_CDCLK_CD2X_PIPE(pipe);
} else {
if (pipe == INVALID_PIPE)
val |= BXT_CDCLK_CD2X_PIPE_NONE;
else
val |= BXT_CDCLK_CD2X_PIPE(pipe);
}
I915_WRITE(CDCLK_CTL, val);
if (pipe != INVALID_PIPE)
......@@ -1813,51 +1826,6 @@ static int icl_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
return dev_priv->cdclk.hw.ref * ratio;
}
static void icl_set_cdclk(struct drm_i915_private *dev_priv,
const struct intel_cdclk_state *cdclk_state,
enum pipe pipe)
{
unsigned int cdclk = cdclk_state->cdclk;
unsigned int vco = cdclk_state->vco;
int ret;
ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
SKL_CDCLK_PREPARE_FOR_CHANGE,
SKL_CDCLK_READY_FOR_CHANGE,
SKL_CDCLK_READY_FOR_CHANGE, 3);
if (ret) {
DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
ret);
return;
}
if (dev_priv->cdclk.hw.vco != 0 &&
dev_priv->cdclk.hw.vco != vco)
cnl_cdclk_pll_disable(dev_priv);
if (dev_priv->cdclk.hw.vco != vco)
cnl_cdclk_pll_enable(dev_priv, vco);
/*
* On ICL CD2X_DIV can only be 1, so we'll never end up changing the
* divider here synchronized to a pipe while CDCLK is on, nor will we
* need the corresponding vblank wait.
*/
I915_WRITE(CDCLK_CTL, ICL_CDCLK_CD2X_PIPE_NONE |
skl_cdclk_decimal(cdclk));
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
cdclk_state->voltage_level);
intel_update_cdclk(dev_priv);
/*
* Can't read out the voltage level :(
* Let's just assume everything is as expected.
*/
dev_priv->cdclk.hw.voltage_level = cdclk_state->voltage_level;
}
static u8 icl_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk)
{
if (IS_ELKHARTLAKE(dev_priv)) {
......@@ -1881,6 +1849,7 @@ static void icl_get_cdclk(struct drm_i915_private *dev_priv,
struct intel_cdclk_state *cdclk_state)
{
u32 val;
int div;
cdclk_state->bypass = 50000;
......@@ -1914,10 +1883,21 @@ static void icl_get_cdclk(struct drm_i915_private *dev_priv,
cdclk_state->vco = (val & BXT_DE_PLL_RATIO_MASK) * cdclk_state->ref;
val = I915_READ(CDCLK_CTL);
WARN_ON((val & BXT_CDCLK_CD2X_DIV_SEL_MASK) != 0);
val = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
switch (val) {
case BXT_CDCLK_CD2X_DIV_SEL_1:
div = 2;
break;
case BXT_CDCLK_CD2X_DIV_SEL_2:
div = 4;
break;
default:
MISSING_CASE(val);
div = 2;
break;
}
cdclk_state->cdclk = cdclk_state->vco / 2;
cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, div);
out:
/*
......@@ -1963,7 +1943,7 @@ static void icl_init_cdclk(struct drm_i915_private *dev_priv)
icl_calc_voltage_level(dev_priv,
sanitized_state.cdclk);
icl_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
cnl_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
}
static void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
......@@ -1975,7 +1955,7 @@ static void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.voltage_level = icl_calc_voltage_level(dev_priv,
cdclk_state.cdclk);
icl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
static void cnl_init_cdclk(struct drm_i915_private *dev_priv)
......@@ -2810,7 +2790,7 @@ void intel_update_rawclk(struct drm_i915_private *dev_priv)
void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 11) {
dev_priv->display.set_cdclk = icl_set_cdclk;
dev_priv->display.set_cdclk = cnl_set_cdclk;
dev_priv->display.modeset_calc_cdclk = icl_modeset_calc_cdclk;
} else if (IS_CANNONLAKE(dev_priv)) {
dev_priv->display.set_cdclk = cnl_set_cdclk;
......
......@@ -9759,7 +9759,10 @@ enum skl_power_gate {
#define BXT_CDCLK_CD2X_PIPE(pipe) ((pipe) << 20)
#define CDCLK_DIVMUX_CD_OVERRIDE (1 << 19)
#define BXT_CDCLK_CD2X_PIPE_NONE BXT_CDCLK_CD2X_PIPE(3)
#define ICL_CDCLK_CD2X_PIPE(pipe) (_PICK(pipe, 0, 2, 6) << 19)
#define ICL_CDCLK_CD2X_PIPE_NONE (7 << 19)
#define TGL_CDCLK_CD2X_PIPE(pipe) BXT_CDCLK_CD2X_PIPE(pipe)
#define TGL_CDCLK_CD2X_PIPE_NONE ICL_CDCLK_CD2X_PIPE_NONE
#define BXT_CDCLK_SSA_PRECHARGE_ENABLE (1 << 16)
#define CDCLK_FREQ_DECIMAL_MASK (0x7ff)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment