Commit 38c8a566 authored by RA-Jay Hung's avatar RA-Jay Hung Committed by John W. Linville

rt2x00: Add rt2800 EEPROM definition

Add and modify NIC Configuration and LED definition of EEPROM
Signed-off-by: default avatarRA-Jay Hung <jay_hung@ralinktech.com>
Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7a7793ef
...@@ -1841,32 +1841,51 @@ struct mac_iveiv_entry { ...@@ -1841,32 +1841,51 @@ struct mac_iveiv_entry {
#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
/* /*
* EEPROM ANTENNA config * EEPROM NIC Configuration 0
* RXPATH: 1: 1R, 2: 2R, 3: 3R * RXPATH: 1: 1R, 2: 2R, 3: 3R
* TXPATH: 1: 1T, 2: 2T * TXPATH: 1: 1T, 2: 2T, 3: 3T
*/ * RF_TYPE: RFIC type
#define EEPROM_ANTENNA 0x001a */
#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) #define EEPROM_NIC_CONF0 0x001a
#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) #define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f)
#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) #define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0)
#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00)
/*
* EEPROM NIC config /*
* CARDBUS_ACCEL: 0 - enable, 1 - disable * EEPROM NIC Configuration 1
*/ * HW_RADIO: 0: disable, 1: enable
#define EEPROM_NIC 0x001b * EXTERNAL_TX_ALC: 0: disable, 1: enable
#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) * EXTERNAL_LNA_2G: 0: disable, 1: enable
#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) * EXTERNAL_LNA_5G: 0: disable, 1: enable
#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) * CARDBUS_ACCEL: 0: enable, 1: disable
#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) * BW40M_SB_2G: 0: disable, 1: enable
#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) * BW40M_SB_5G: 0: disable, 1: enable
#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) * WPS_PBC: 0: disable, 1: enable
#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) * BW40M_2G: 0: enable, 1: disable
#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) * BW40M_5G: 0: enable, 1: disable
#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) * BROADBAND_EXT_LNA: 0: disable, 1: enable
#define EEPROM_NIC_BW40M_A FIELD16(0x0200) * ANT_DIVERSITY: 00: Disable, 01: Diversity,
#define EEPROM_NIC_ANT_DIVERSITY FIELD16(0x0800) * 10: Main antenna, 11: Aux antenna
#define EEPROM_NIC_DAC_TEST FIELD16(0x8000) * INTERNAL_TX_ALC: 0: disable, 1: enable
* BT_COEXIST: 0: disable, 1: enable
* DAC_TEST: 0: disable, 1: enable
*/
#define EEPROM_NIC_CONF1 0x001b
#define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001)
#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008)
#define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010)
#define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020)
#define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040)
#define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080)
#define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100)
#define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200)
#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400)
#define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800)
#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000)
#define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000)
#define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000)
/* /*
* EEPROM frequency * EEPROM frequency
...@@ -1888,9 +1907,9 @@ struct mac_iveiv_entry { ...@@ -1888,9 +1907,9 @@ struct mac_iveiv_entry {
* POLARITY_GPIO_4: Polarity GPIO4 setting. * POLARITY_GPIO_4: Polarity GPIO4 setting.
* LED_MODE: Led mode. * LED_MODE: Led mode.
*/ */
#define EEPROM_LED1 0x001e #define EEPROM_LED_AG_CONF 0x001e
#define EEPROM_LED2 0x001f #define EEPROM_LED_ACT_CONF 0x001f
#define EEPROM_LED3 0x0020 #define EEPROM_LED_POLARITY 0x0020
#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) #define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
...@@ -1901,6 +1920,17 @@ struct mac_iveiv_entry { ...@@ -1901,6 +1920,17 @@ struct mac_iveiv_entry {
#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
#define EEPROM_LED_LED_MODE FIELD16(0x1f00) #define EEPROM_LED_LED_MODE FIELD16(0x1f00)
/*
* EEPROM NIC Configuration 2
* RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
* TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
* CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved
*/
#define EEPROM_NIC_CONF2 0x0021
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
/* /*
* EEPROM LNA * EEPROM LNA
*/ */
...@@ -2007,9 +2037,9 @@ struct mac_iveiv_entry { ...@@ -2007,9 +2037,9 @@ struct mac_iveiv_entry {
#define MCU_CURRENT 0x36 #define MCU_CURRENT 0x36
#define MCU_LED 0x50 #define MCU_LED 0x50
#define MCU_LED_STRENGTH 0x51 #define MCU_LED_STRENGTH 0x51
#define MCU_LED_1 0x52 #define MCU_LED_AG_CONF 0x52
#define MCU_LED_2 0x53 #define MCU_LED_ACT_CONF 0x53
#define MCU_LED_3 0x54 #define MCU_LED_LED_POLARITY 0x54
#define MCU_RADAR 0x60 #define MCU_RADAR 0x60
#define MCU_BOOT_SIGNAL 0x72 #define MCU_BOOT_SIGNAL 0x72
#define MCU_BBP_SIGNAL 0x80 #define MCU_BBP_SIGNAL 0x80
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment