Commit 38f790a8 authored by René van Dorst's avatar René van Dorst Committed by David S. Miller

net: dsa: mt7530: Add support for port 5

Adding support for port 5.

Port 5 can muxed/interface to:
- internal 5th GMAC of the switch; can be used as 2nd CPU port or as
  extra port with an external phy for a 6th ethernet port.
- internal PHY of port 0 or 4; Used in most applications so that port 0
  or 4 is the WAN port and interfaces with the 2nd GMAC of the SOC.
Signed-off-by: default avatarRené van Dorst <opensource@vdorst.com>
Tested-by: default avatarFrank Wunderlich <frank-w@public-files.de>
Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 4f358cbd
......@@ -633,6 +633,77 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
return ARRAY_SIZE(mt7530_mib);
}
static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
u8 tx_delay = 0;
int val;
mutex_lock(&priv->reg_mutex);
val = mt7530_read(priv, MT7530_MHWTRAP);
val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
switch (priv->p5_intf_sel) {
case P5_INTF_SEL_PHY_P0:
/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
val |= MHWTRAP_PHY0_SEL;
/* fall through */
case P5_INTF_SEL_PHY_P4:
/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
/* Setup the MAC by default for the cpu port */
mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
break;
case P5_INTF_SEL_GMAC5:
/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
val &= ~MHWTRAP_P5_DIS;
break;
case P5_DISABLED:
interface = PHY_INTERFACE_MODE_NA;
break;
default:
dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
priv->p5_intf_sel);
goto unlock_exit;
}
/* Setup RGMII settings */
if (phy_interface_mode_is_rgmii(interface)) {
val |= MHWTRAP_P5_RGMII_MODE;
/* P5 RGMII RX Clock Control: delay setting for 1000M */
mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
/* Don't set delay in DSA mode */
if (!dsa_is_dsa_port(priv->ds, 5) &&
(interface == PHY_INTERFACE_MODE_RGMII_TXID ||
interface == PHY_INTERFACE_MODE_RGMII_ID))
tx_delay = 4; /* n * 0.5 ns */
/* P5 RGMII TX Clock Control: delay x */
mt7530_write(priv, MT7530_P5RGMIITXCR,
CSR_RGMII_TXC_CFG(0x10 + tx_delay));
/* reduce P5 RGMII Tx driving, 8mA */
mt7530_write(priv, MT7530_IO_DRV_CR,
P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
}
mt7530_write(priv, MT7530_MHWTRAP, val);
dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
priv->p5_interface = interface;
unlock_exit:
mutex_unlock(&priv->reg_mutex);
}
static int
mt7530_cpu_port_enable(struct mt7530_priv *priv,
int port)
......@@ -1169,7 +1240,10 @@ static int
mt7530_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
struct device_node *phy_node;
struct device_node *mac_np;
struct mt7530_dummy_poll p;
phy_interface_t interface;
struct device_node *dn;
u32 id, val;
int ret, i;
......@@ -1260,6 +1334,40 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_port_disable(ds, i);
}
/* Setup port 5 */
priv->p5_intf_sel = P5_DISABLED;
interface = PHY_INTERFACE_MODE_NA;
if (!dsa_is_unused_port(ds, 5)) {
priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
interface = of_get_phy_mode(ds->ports[5].dn);
} else {
/* Scan the ethernet nodes. look for GMAC1, lookup used phy */
for_each_child_of_node(dn, mac_np) {
if (!of_device_is_compatible(mac_np,
"mediatek,eth-mac"))
continue;
ret = of_property_read_u32(mac_np, "reg", &id);
if (ret < 0 || id != 1)
continue;
phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
if (phy_node->parent == priv->dev->of_node->parent) {
interface = of_get_phy_mode(mac_np);
id = of_mdio_parse_addr(ds->dev, phy_node);
if (id == 0)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
if (id == 4)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
}
of_node_put(phy_node);
break;
}
}
mt7530_setup_port5(ds, interface);
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
......@@ -1284,7 +1392,16 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
if (state->interface != PHY_INTERFACE_MODE_GMII)
return;
break;
/* case 5: Port 5 is not supported! */
case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
if (priv->p5_interface == state->interface)
break;
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_GMII)
return;
mt7530_setup_port5(ds, state->interface);
break;
case 6: /* 1st cpu port */
if (priv->p6_interface == state->interface)
break;
......@@ -1324,6 +1441,10 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
PMCR_BACKPR_EN | PMCR_FORCE_MODE | PMCR_FORCE_LNK;
/* Are we connected to external phy */
if (port == 5 && dsa_is_user_port(ds, 5))
mcr_new |= PMCR_EXT_PHY;
switch (state->speed) {
case SPEED_1000:
mcr_new |= PMCR_FORCE_SPEED_1000;
......@@ -1379,7 +1500,13 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
state->interface != PHY_INTERFACE_MODE_GMII)
goto unsupported;
break;
/* case 5: Port 5 not supported! */
case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
if (state->interface != PHY_INTERFACE_MODE_NA &&
!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_GMII)
goto unsupported;
break;
case 6: /* 1st cpu port */
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_RGMII &&
......@@ -1396,15 +1523,21 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
phylink_set_port_modes(mask);
phylink_set(mask, Autoneg);
if (state->interface != PHY_INTERFACE_MODE_TRGMII) {
if (state->interface == PHY_INTERFACE_MODE_TRGMII) {
phylink_set(mask, 1000baseT_Full);
} else {
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
phylink_set(mask, 1000baseT_Half);
}
if (state->interface != PHY_INTERFACE_MODE_MII) {
phylink_set(mask, 1000baseT_Half);
phylink_set(mask, 1000baseT_Full);
if (port == 5)
phylink_set(mask, 1000baseX_Full);
}
}
phylink_set(mask, Pause);
phylink_set(mask, Asym_Pause);
......
......@@ -186,6 +186,7 @@ enum mt7530_vlan_port_attr {
/* Register for port MAC control register */
#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
#define PMCR_EXT_PHY BIT(17)
#define PMCR_MAC_MODE BIT(16)
#define PMCR_FORCE_MODE BIT(15)
#define PMCR_TX_EN BIT(14)
......@@ -245,6 +246,7 @@ enum mt7530_vlan_port_attr {
/* Register for hw trap modification */
#define MT7530_MHWTRAP 0x7804
#define MHWTRAP_PHY0_SEL BIT(20)
#define MHWTRAP_MANUAL BIT(16)
#define MHWTRAP_P5_MAC_SEL BIT(13)
#define MHWTRAP_P6_DIS BIT(8)
......@@ -402,6 +404,30 @@ struct mt7530_port {
u16 pvid;
};
/* Port 5 interface select definitions */
enum p5_interface_select {
P5_DISABLED = 0,
P5_INTF_SEL_PHY_P0,
P5_INTF_SEL_PHY_P4,
P5_INTF_SEL_GMAC5,
};
static const char *p5_intf_modes(unsigned int p5_interface)
{
switch (p5_interface) {
case P5_DISABLED:
return "DISABLED";
case P5_INTF_SEL_PHY_P0:
return "PHY P0";
case P5_INTF_SEL_PHY_P4:
return "PHY P4";
case P5_INTF_SEL_GMAC5:
return "GMAC5";
default:
return "unknown";
}
}
/* struct mt7530_priv - This is the main data structure for holding the state
* of the driver
* @dev: The device pointer
......@@ -418,6 +444,7 @@ struct mt7530_port {
* @reg_mutex: The lock for protecting among process accessing
* registers
* @p6_interface Holding the current port 6 interface
* @p5_intf_sel: Holding the current port 5 interface select
*/
struct mt7530_priv {
struct device *dev;
......@@ -431,6 +458,8 @@ struct mt7530_priv {
unsigned int id;
bool mcm;
phy_interface_t p6_interface;
phy_interface_t p5_interface;
unsigned int p5_intf_sel;
struct mt7530_port ports[MT7530_NUM_PORTS];
/* protect among processes for registers access*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment