platform/x86: intel_cht_int33fe: Remove old style mux connections

The new mux connection naming scheme is now in use, so
dropping the connections still using the old names. From now
on the same connection description named "mode-switch" is
used with both the port and the alternate modes, so on CHT
the DP alt mode will use the same connection as the port to
get a handle to the mux device.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/platform/x86/intel_cht_int33fe.c

@@ -32,7 +32,7 @@ struct cht_int33fe_data {
 	struct i2c_client *fusb302;
 	struct i2c_client *pi3usb30532;
 	/* Contain a list-head must be per device */
-	struct device_connection connections[7];
+	struct device_connection connections[4];
 };
 
 /*
@@ -174,22 +174,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 
 	data->connections[0].endpoint[0] = "port0";
 	data->connections[0].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[0].id = "typec-switch";
+	data->connections[0].id = "orientation-switch";
 	data->connections[1].endpoint[0] = "port0";
 	data->connections[1].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[1].id = "typec-mux";
-	data->connections[2].endpoint[0] = "port0";
-	data->connections[2].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[2].id = "idff01m01";
-	data->connections[3].endpoint[0] = "i2c-fusb302";
-	data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
-	data->connections[3].id = "usb-role-switch";
-	data->connections[4].endpoint[0] = "port0";
-	data->connections[4].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[4].id = "orientation-switch";
-	data->connections[5].endpoint[0] = "port0";
-	data->connections[5].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[5].id = "mode-switch";
+	data->connections[1].id = "mode-switch";
+	data->connections[2].endpoint[0] = "i2c-fusb302";
+	data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
+	data->connections[2].id = "usb-role-switch";
 
 	device_connections_add(data->connections);