Commit 3952c9c5 authored by Christoph Hellwig's avatar Christoph Hellwig

[PATCH] get rid of obsolete APIs in nsp32

Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent ca47f1c6
......@@ -43,10 +43,11 @@
#include <asm/system.h>
#include <asm/io.h>
#include "scsi.h"
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/scsi.h>
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
# include <linux/blk.h>
......@@ -209,37 +210,38 @@ static int nsp32_detect (struct pci_dev *pdev);
#else
static int nsp32_detect (Scsi_Host_Template *);
#endif
static int nsp32_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int nsp32_queuecommand(struct scsi_cmnd *,
void (*done)(struct scsi_cmnd *));
static const char *nsp32_info (struct Scsi_Host *);
static int nsp32_release (struct Scsi_Host *);
/* SCSI error handler */
static int nsp32_eh_abort (Scsi_Cmnd *);
static int nsp32_eh_bus_reset (Scsi_Cmnd *);
static int nsp32_eh_host_reset(Scsi_Cmnd *);
static int nsp32_eh_abort (struct scsi_cmnd *);
static int nsp32_eh_bus_reset (struct scsi_cmnd *);
static int nsp32_eh_host_reset(struct scsi_cmnd *);
/* generate SCSI message */
static void nsp32_build_identify(Scsi_Cmnd *);
static void nsp32_build_nop (Scsi_Cmnd *);
static void nsp32_build_reject (Scsi_Cmnd *);
static void nsp32_build_sdtr (Scsi_Cmnd *, unsigned char, unsigned char);
static void nsp32_build_identify(struct scsi_cmnd *);
static void nsp32_build_nop (struct scsi_cmnd *);
static void nsp32_build_reject (struct scsi_cmnd *);
static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char);
/* SCSI message handler */
static int nsp32_busfree_occur(Scsi_Cmnd *, unsigned short);
static void nsp32_msgout_occur (Scsi_Cmnd *);
static void nsp32_msgin_occur (Scsi_Cmnd *, unsigned long, unsigned short);
static int nsp32_setup_sg_table (Scsi_Cmnd *);
static int nsp32_selection_autopara(Scsi_Cmnd *);
static int nsp32_selection_autoscsi(Scsi_Cmnd *);
static void nsp32_scsi_done (Scsi_Cmnd *);
static int nsp32_arbitration (Scsi_Cmnd *, unsigned int);
static int nsp32_reselection (Scsi_Cmnd *, unsigned char);
static void nsp32_adjust_busfree (Scsi_Cmnd *, unsigned int);
static void nsp32_restart_autoscsi (Scsi_Cmnd *, unsigned short);
static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short);
static void nsp32_msgout_occur (struct scsi_cmnd *);
static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short);
static int nsp32_setup_sg_table (struct scsi_cmnd *);
static int nsp32_selection_autopara(struct scsi_cmnd *);
static int nsp32_selection_autoscsi(struct scsi_cmnd *);
static void nsp32_scsi_done (struct scsi_cmnd *);
static int nsp32_arbitration (struct scsi_cmnd *, unsigned int);
static int nsp32_reselection (struct scsi_cmnd *, unsigned char);
static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int);
static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);
/* SCSI SDTR */
static void nsp32_analyze_sdtr (Scsi_Cmnd *);
static void nsp32_analyze_sdtr (struct scsi_cmnd *);
static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char);
static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *);
......@@ -279,7 +281,7 @@ static void nsp32_dmessage(const char *, int, int, char *, ...);
/*
* max_sectors is currently limited up to 128.
*/
static Scsi_Host_Template nsp32_template = {
static struct scsi_host_template nsp32_template = {
.proc_name = "nsp32",
.name = "Workbit NinjaSCSI-32Bi/UDE",
.proc_info = nsp32_proc_info,
......@@ -388,7 +390,7 @@ static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)
/*
* IDENTIFY Message
*/
static void nsp32_build_identify(Scsi_Cmnd *SCpnt)
static void nsp32_build_identify(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
int pos = data->msgout_len;
......@@ -407,7 +409,7 @@ static void nsp32_build_identify(Scsi_Cmnd *SCpnt)
/*
* SDTR Message Routine
*/
static void nsp32_build_sdtr(Scsi_Cmnd *SCpnt,
static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
unsigned char period,
unsigned char offset)
{
......@@ -426,7 +428,7 @@ static void nsp32_build_sdtr(Scsi_Cmnd *SCpnt,
/*
* No Operation Message
*/
static void nsp32_build_nop(Scsi_Cmnd *SCpnt)
static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
int pos = data->msgout_len;
......@@ -444,7 +446,7 @@ static void nsp32_build_nop(Scsi_Cmnd *SCpnt)
/*
* Reject Message
*/
static void nsp32_build_reject(Scsi_Cmnd *SCpnt)
static void nsp32_build_reject(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
int pos = data->msgout_len;
......@@ -457,7 +459,7 @@ static void nsp32_build_reject(Scsi_Cmnd *SCpnt)
* timer
*/
#if 0
static void nsp32_start_timer(Scsi_Cmnd *SCpnt, int time)
static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time)
{
unsigned int base = SCpnt->host->io_port;
......@@ -475,7 +477,7 @@ static void nsp32_start_timer(Scsi_Cmnd *SCpnt, int time)
/*
* set SCSI command and other parameter to asic, and start selection phase
*/
static int nsp32_selection_autopara(Scsi_Cmnd *SCpnt)
static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -606,7 +608,7 @@ static int nsp32_selection_autopara(Scsi_Cmnd *SCpnt)
/*
* Selection with AUTO SCSI (without AUTO PARAMETER)
*/
static int nsp32_selection_autoscsi(Scsi_Cmnd *SCpnt)
static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -781,7 +783,7 @@ static int nsp32_selection_autoscsi(Scsi_Cmnd *SCpnt)
* arbitration delay time is defined minimal 2.4us in SCSI
* specification, thus udelay works as coarse grained wait timer.
*/
static int nsp32_arbitration(Scsi_Cmnd *SCpnt, unsigned int base)
static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)
{
unsigned char arbit;
int status = TRUE;
......@@ -830,7 +832,7 @@ static int nsp32_arbitration(Scsi_Cmnd *SCpnt, unsigned int base)
* reselection target id&lun must be already set.
* SCSI-2 says IDENTIFY implies RESTORE_POINTER operation.
*/
static int nsp32_reselection(Scsi_Cmnd *SCpnt, unsigned char newlun)
static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int host_id = SCpnt->device->host->this_id;
......@@ -884,7 +886,7 @@ static int nsp32_reselection(Scsi_Cmnd *SCpnt, unsigned char newlun)
*
* Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time.
*/
static int nsp32_setup_sg_table(Scsi_Cmnd *SCpnt)
static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
struct scatterlist *sgl;
......@@ -904,7 +906,7 @@ static int nsp32_setup_sg_table(Scsi_Cmnd *SCpnt)
if (SCpnt->use_sg) {
sgl = (struct scatterlist *)SCpnt->request_buffer;
num = pci_map_sg(data->Pci, sgl, SCpnt->use_sg,
scsi_to_pci_dma_dir(SCpnt->sc_data_direction));
SCpnt->sc_data_direction);
for (i = 0; i < num; i++) {
/*
* Build nsp32_sglist, substitute sg dma addresses.
......@@ -932,7 +934,7 @@ static int nsp32_setup_sg_table(Scsi_Cmnd *SCpnt)
} else {
SCpnt->SCp.have_data_in = pci_map_single(data->Pci,
SCpnt->request_buffer, SCpnt->request_bufflen,
scsi_to_pci_dma_dir(SCpnt->sc_data_direction));
SCpnt->sc_data_direction);
sgt[0].addr = cpu_to_le32(SCpnt->SCp.have_data_in);
sgt[0].len = cpu_to_le32(SCpnt->request_bufflen | SGTEND); /* set end mark */
......@@ -950,7 +952,7 @@ static int nsp32_setup_sg_table(Scsi_Cmnd *SCpnt)
return TRUE;
}
static int nsp32_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
nsp32_target *target;
......@@ -1205,7 +1207,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id, struct pt_regs *regs)
{
nsp32_hw_data *data = dev_id;
unsigned int base = data->BaseAddress;
Scsi_Cmnd *SCpnt = data->CurrentSC;
struct scsi_cmnd *SCpnt = data->CurrentSC;
unsigned short auto_stat, irq_stat, trans_stat;
unsigned char busmon, busphase;
unsigned long flags;
......@@ -1622,7 +1624,7 @@ static int nsp32_proc_info(
* Reset parameters and call scsi_done for data->cur_lunt.
* Be careful setting SCpnt->result = DID_* before calling this function.
*/
static void nsp32_scsi_done(Scsi_Cmnd *SCpnt)
static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -1637,13 +1639,12 @@ static void nsp32_scsi_done(Scsi_Cmnd *SCpnt)
if (SCpnt->use_sg) {
pci_unmap_sg(data->Pci,
(struct scatterlist *)SCpnt->buffer,
SCpnt->use_sg,
scsi_to_pci_dma_dir(SCpnt->sc_data_direction));
SCpnt->use_sg, SCpnt->sc_data_direction);
} else {
pci_unmap_single(data->Pci,
(u32)SCpnt->SCp.have_data_in,
SCpnt->request_bufflen,
scsi_to_pci_dma_dir(SCpnt->sc_data_direction));
SCpnt->sc_data_direction);
}
skip:
......@@ -1678,7 +1679,7 @@ static void nsp32_scsi_done(Scsi_Cmnd *SCpnt)
* MsgIn 04: Diconnect.
* In other case, unexpected BUSFREE is detected.
*/
static int nsp32_busfree_occur(Scsi_Cmnd *SCpnt, unsigned short execph)
static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -1836,7 +1837,7 @@ static int nsp32_busfree_occur(Scsi_Cmnd *SCpnt, unsigned short execph)
* Note: This driver adjust the SG table using SCSI ACK
* counter instead of BMCNT counter!
*/
static void nsp32_adjust_busfree(Scsi_Cmnd *SCpnt, unsigned int s_sacklen)
static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
int old_entry = data->cur_entry;
......@@ -1909,7 +1910,7 @@ static void nsp32_adjust_busfree(Scsi_Cmnd *SCpnt, unsigned int s_sacklen)
* message out phase. It, however, has more than 3 messages,
* HBA creates the interrupt and we have to process by hand.
*/
static void nsp32_msgout_occur(Scsi_Cmnd *SCpnt)
static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -1985,7 +1986,7 @@ static void nsp32_msgout_occur(Scsi_Cmnd *SCpnt)
* Note: Restarting AutoSCSI needs set:
* SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL
*/
static void nsp32_restart_autoscsi(Scsi_Cmnd *SCpnt, unsigned short command)
static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = data->BaseAddress;
......@@ -2051,7 +2052,7 @@ static void nsp32_restart_autoscsi(Scsi_Cmnd *SCpnt, unsigned short command)
/*
* cannot run automatically message in occur
*/
static void nsp32_msgin_occur(Scsi_Cmnd *SCpnt,
static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
unsigned long irq_status,
unsigned short execph)
{
......@@ -2348,7 +2349,7 @@ static void nsp32_msgin_occur(Scsi_Cmnd *SCpnt,
/*
*
*/
static void nsp32_analyze_sdtr(Scsi_Cmnd *SCpnt)
static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
nsp32_target *target = data->cur_target;
......@@ -2956,7 +2957,7 @@ static const char *nsp32_info(struct Scsi_Host *shpnt)
/****************************************************************************
* error handler
*/
static int nsp32_eh_abort(Scsi_Cmnd *SCpnt)
static int nsp32_eh_abort(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -2984,7 +2985,7 @@ static int nsp32_eh_abort(Scsi_Cmnd *SCpnt)
return SUCCESS;
}
static int nsp32_eh_bus_reset(Scsi_Cmnd *SCpnt)
static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
......@@ -3041,7 +3042,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
data->CurrentSC = NULL;
}
static int nsp32_eh_host_reset(Scsi_Cmnd *SCpnt)
static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
{
struct Scsi_Host *host = SCpnt->device->host;
unsigned int base = SCpnt->device->host->io_port;
......
......@@ -499,7 +499,7 @@ typedef struct _nsp32_autoparam {
#define MSGIN03 BIT(1) /* Auto Msg In 03 Flag */
typedef struct _nsp32_lunt {
Scsi_Cmnd *SCpnt; /* Current Handling Scsi_Cmnd */
struct scsi_cmnd *SCpnt; /* Current Handling struct scsi_cmnd */
unsigned long save_datp; /* Save Data Pointer - saved position from initial address */
int msgin03; /* auto msg in 03 flag */
unsigned int sg_num; /* Total number of SG entries */
......@@ -567,7 +567,7 @@ typedef struct _nsp32_hw_data {
#define NSP32_MMIO_OFFSET 0x0800
unsigned long MmioLength;
Scsi_Cmnd *CurrentSC;
struct scsi_cmnd *CurrentSC;
struct pci_dev *Pci;
const struct pci_device_id *pci_devid;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment