Commit 3a77e0d7 authored by John Crispin's avatar John Crispin Committed by Paul Burton

MIPS: ath79: drop machfiles

With the target now being fully OF based, we can drop the legacy mach
files. Boards can now boot fully of devicetree files.
Signed-off-by: default avatarJohn Crispin <john@phrozen.org>
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>
parent 51fa4f89
...@@ -206,7 +206,6 @@ config ATH79 ...@@ -206,7 +206,6 @@ config ATH79
select COMMON_CLK select COMMON_CLK
select CLKDEV_LOOKUP select CLKDEV_LOOKUP
select IRQ_MIPS_CPU select IRQ_MIPS_CPU
select MIPS_MACHINE
select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_EARLY_PRINTK select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_32BIT_KERNEL
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
if ATH79 if ATH79
menu "Atheros AR71XX/AR724X/AR913X machine selection"
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros AP121 reference board.
config ATH79_MACH_AP136
bool "Atheros AP136 reference board"
select SOC_QCA955X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros AP136 reference board.
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
config ATH79_MACH_DB120
bool "Atheros DB120 reference board"
select SOC_AR934X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros DB120 reference board.
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
help
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
help
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
endmenu
config SOC_AR71XX config SOC_AR71XX
select HAVE_PCI select HAVE_PCI
def_bool n def_bool n
......
...@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o ...@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
#
# Machines
#
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
...@@ -26,7 +26,6 @@ ...@@ -26,7 +26,6 @@
#include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h" #include "common.h"
#include "machtypes.h"
#define AR71XX_BASE_FREQ 40000000 #define AR71XX_BASE_FREQ 40000000
#define AR724X_BASE_FREQ 40000000 #define AR724X_BASE_FREQ 40000000
......
/*
* Atheros AP121 board support
*
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#define AP121_GPIO_LED_WLAN 0
#define AP121_GPIO_LED_USB 1
#define AP121_GPIO_BTN_JUMPSTART 11
#define AP121_GPIO_BTN_RESET 12
#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
#define AP121_CAL_DATA_ADDR 0x1fff1000
static struct gpio_led ap121_leds_gpio[] __initdata = {
{
.name = "ap121:green:usb",
.gpio = AP121_GPIO_LED_USB,
.active_low = 0,
},
{
.name = "ap121:green:wlan",
.gpio = AP121_GPIO_LED_WLAN,
.active_low = 0,
},
};
static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
{
.desc = "jumpstart button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP121_GPIO_BTN_JUMPSTART,
.active_low = 1,
},
{
.desc = "reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP121_GPIO_BTN_RESET,
.active_low = 1,
}
};
static struct spi_board_info ap121_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l1606e",
}
};
static struct ath79_spi_platform_data ap121_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
static void __init ap121_setup(void)
{
u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
ap121_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap121_gpio_keys),
ap121_gpio_keys);
ath79_register_spi(&ap121_spi_data, ap121_spi_info,
ARRAY_SIZE(ap121_spi_info));
ath79_register_usb();
ath79_register_wmac(cal_data);
}
MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
ap121_setup);
/*
* Qualcomm Atheros AP136 reference board support
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "pci.h"
#define AP136_GPIO_LED_STATUS_RED 14
#define AP136_GPIO_LED_STATUS_GREEN 19
#define AP136_GPIO_LED_USB 4
#define AP136_GPIO_LED_WLAN_2G 13
#define AP136_GPIO_LED_WLAN_5G 12
#define AP136_GPIO_LED_WPS_RED 15
#define AP136_GPIO_LED_WPS_GREEN 20
#define AP136_GPIO_BTN_WPS 16
#define AP136_GPIO_BTN_RFKILL 21
#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
#define AP136_WMAC_CALDATA_OFFSET 0x1000
#define AP136_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led ap136_leds_gpio[] __initdata = {
{
.name = "qca:green:status",
.gpio = AP136_GPIO_LED_STATUS_GREEN,
.active_low = 1,
},
{
.name = "qca:red:status",
.gpio = AP136_GPIO_LED_STATUS_RED,
.active_low = 1,
},
{
.name = "qca:green:wps",
.gpio = AP136_GPIO_LED_WPS_GREEN,
.active_low = 1,
},
{
.name = "qca:red:wps",
.gpio = AP136_GPIO_LED_WPS_RED,
.active_low = 1,
},
{
.name = "qca:red:wlan-2g",
.gpio = AP136_GPIO_LED_WLAN_2G,
.active_low = 1,
},
{
.name = "qca:red:usb",
.gpio = AP136_GPIO_LED_USB,
.active_low = 1,
}
};
static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP136_GPIO_BTN_WPS,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP136_GPIO_BTN_RFKILL,
.active_low = 1,
},
};
static struct spi_board_info ap136_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l6405d",
}
};
static struct ath79_spi_platform_data ap136_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
#ifdef CONFIG_PCI
static struct ath9k_platform_data ap136_ath9k_data;
static int ap136_pci_plat_dev_init(struct pci_dev *dev)
{
if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
dev->dev.platform_data = &ap136_ath9k_data;
return 0;
}
static void __init ap136_pci_init(u8 *eeprom)
{
memcpy(ap136_ath9k_data.eeprom_data, eeprom,
sizeof(ap136_ath9k_data.eeprom_data));
ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
ath79_register_pci();
}
#else
static inline void ap136_pci_init(u8 *eeprom) {}
#endif /* CONFIG_PCI */
static void __init ap136_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
ap136_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap136_gpio_keys),
ap136_gpio_keys);
ath79_register_spi(&ap136_spi_data, ap136_spi_info,
ARRAY_SIZE(ap136_spi_info));
ath79_register_usb();
ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
}
MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
"Atheros AP136-010 reference board",
ap136_setup);
/*
* Atheros AP81 board support
*
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "machtypes.h"
#include "dev-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#define AP81_GPIO_LED_STATUS 1
#define AP81_GPIO_LED_AOSS 3
#define AP81_GPIO_LED_WLAN 6
#define AP81_GPIO_LED_POWER 14
#define AP81_GPIO_BTN_SW4 12
#define AP81_GPIO_BTN_SW1 21
#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
#define AP81_CAL_DATA_ADDR 0x1fff1000
static struct gpio_led ap81_leds_gpio[] __initdata = {
{
.name = "ap81:green:status",
.gpio = AP81_GPIO_LED_STATUS,
.active_low = 1,
}, {
.name = "ap81:amber:aoss",
.gpio = AP81_GPIO_LED_AOSS,
.active_low = 1,
}, {
.name = "ap81:green:wlan",
.gpio = AP81_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "ap81:green:power",
.gpio = AP81_GPIO_LED_POWER,
.active_low = 1,
}
};
static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
{
.desc = "sw1",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP81_GPIO_BTN_SW1,
.active_low = 1,
} , {
.desc = "sw4",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP81_GPIO_BTN_SW4,
.active_low = 1,
}
};
static struct spi_board_info ap81_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
}
};
static struct ath79_spi_platform_data ap81_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
static void __init ap81_setup(void)
{
u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
ap81_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap81_gpio_keys),
ap81_gpio_keys);
ath79_register_spi(&ap81_spi_data, ap81_spi_info,
ARRAY_SIZE(ap81_spi_info));
ath79_register_wmac(cal_data);
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
ap81_setup);
/*
* Atheros DB120 reference board support
*
* Copyright (c) 2011 Qualcomm Atheros
* Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "pci.h"
#define DB120_GPIO_LED_WLAN_5G 12
#define DB120_GPIO_LED_WLAN_2G 13
#define DB120_GPIO_LED_STATUS 14
#define DB120_GPIO_LED_WPS 15
#define DB120_GPIO_BTN_WPS 16
#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
#define DB120_WMAC_CALDATA_OFFSET 0x1000
#define DB120_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led db120_leds_gpio[] __initdata = {
{
.name = "db120:green:status",
.gpio = DB120_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "db120:green:wps",
.gpio = DB120_GPIO_LED_WPS,
.active_low = 1,
},
{
.name = "db120:green:wlan-5g",
.gpio = DB120_GPIO_LED_WLAN_5G,
.active_low = 1,
},
{
.name = "db120:green:wlan-2g",
.gpio = DB120_GPIO_LED_WLAN_2G,
.active_low = 1,
},
};
static struct gpio_keys_button db120_gpio_keys[] __initdata = {
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
.gpio = DB120_GPIO_BTN_WPS,
.active_low = 1,
},
};
static struct spi_board_info db120_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "s25sl064a",
}
};
static struct ath79_spi_platform_data db120_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
#ifdef CONFIG_PCI
static struct ath9k_platform_data db120_ath9k_data;
static int db120_pci_plat_dev_init(struct pci_dev *dev)
{
switch (PCI_SLOT(dev->devfn)) {
case 0:
dev->dev.platform_data = &db120_ath9k_data;
break;
}
return 0;
}
static void __init db120_pci_init(u8 *eeprom)
{
memcpy(db120_ath9k_data.eeprom_data, eeprom,
sizeof(db120_ath9k_data.eeprom_data));
ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
ath79_register_pci();
}
#else
static inline void db120_pci_init(u8 *eeprom) {}
#endif /* CONFIG_PCI */
static void __init db120_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
db120_leds_gpio);
ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
ARRAY_SIZE(db120_gpio_keys),
db120_gpio_keys);
ath79_register_spi(&db120_spi_data, db120_spi_info,
ARRAY_SIZE(db120_spi_info));
ath79_register_usb();
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
}
MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
db120_setup);
/*
* Atheros PB44 reference board support
*
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/gpio/machine.h>
#include <linux/platform_data/pcf857x.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "pci.h"
#define PB44_GPIO_I2C_SCL 0
#define PB44_GPIO_I2C_SDA 1
#define PB44_GPIO_EXP_BASE 16
#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10)
#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
static struct gpiod_lookup_table pb44_i2c_gpiod_table = {
.dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL,
NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
static struct platform_device pb44_i2c_gpio_device = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = NULL,
}
};
static struct pcf857x_platform_data pb44_pcf857x_data = {
.gpio_base = PB44_GPIO_EXP_BASE,
};
static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
.platform_data = &pb44_pcf857x_data,
},
};
static struct gpio_led pb44_leds_gpio[] __initdata = {
{
.name = "pb44:amber:jump1",
.gpio = PB44_GPIO_LED_JUMP1,
.active_low = 1,
}, {
.name = "pb44:green:jump2",
.gpio = PB44_GPIO_LED_JUMP2,
.active_low = 1,
},
};
static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
{
.desc = "soft_reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
.gpio = PB44_GPIO_SW_RESET,
.active_low = 1,
} , {
.desc = "jumpstart",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
.gpio = PB44_GPIO_SW_JUMP,
.active_low = 1,
}
};
static struct spi_board_info pb44_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
},
};
static struct ath79_spi_platform_data pb44_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
static void __init pb44_init(void)
{
gpiod_add_lookup_table(&pb44_i2c_gpiod_table);
i2c_register_board_info(0, pb44_i2c_board_info,
ARRAY_SIZE(pb44_i2c_board_info));
platform_device_register(&pb44_i2c_gpio_device);
ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
pb44_leds_gpio);
ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
ARRAY_SIZE(pb44_gpio_keys),
pb44_gpio_keys);
ath79_register_spi(&pb44_spi_data, pb44_spi_info,
ARRAY_SIZE(pb44_spi_info));
ath79_register_usb();
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
pb44_init);
/*
* Ubiquiti Networks XM (rev 1.0) board support
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
*
* Derived from: mach-pb44.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include <asm/mach-ath79/irq.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "pci.h"
#define UBNT_XM_GPIO_LED_L1 0
#define UBNT_XM_GPIO_LED_L2 1
#define UBNT_XM_GPIO_LED_L3 11
#define UBNT_XM_GPIO_LED_L4 7
#define UBNT_XM_GPIO_BTN_RESET 12
#define UBNT_XM_KEYS_POLL_INTERVAL 20
#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
{
.name = "ubnt-xm:red:link1",
.gpio = UBNT_XM_GPIO_LED_L1,
.active_low = 0,
}, {
.name = "ubnt-xm:orange:link2",
.gpio = UBNT_XM_GPIO_LED_L2,
.active_low = 0,
}, {
.name = "ubnt-xm:green:link3",
.gpio = UBNT_XM_GPIO_LED_L3,
.active_low = 0,
}, {
.name = "ubnt-xm:green:link4",
.gpio = UBNT_XM_GPIO_LED_L4,
.active_low = 0,
},
};
static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
.gpio = UBNT_XM_GPIO_BTN_RESET,
.active_low = 1,
}
};
static struct spi_board_info ubnt_xm_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l6405d",
}
};
static struct ath79_spi_platform_data ubnt_xm_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
#ifdef CONFIG_PCI
static struct ath9k_platform_data ubnt_xm_eeprom_data;
static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
{
switch (PCI_SLOT(dev->devfn)) {
case 0:
dev->dev.platform_data = &ubnt_xm_eeprom_data;
break;
}
return 0;
}
static void __init ubnt_xm_pci_init(void)
{
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
ath79_register_pci();
}
#else
static inline void ubnt_xm_pci_init(void) {}
#endif /* CONFIG_PCI */
static void __init ubnt_xm_init(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
ubnt_xm_leds_gpio);
ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_xm_gpio_keys),
ubnt_xm_gpio_keys);
ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
ARRAY_SIZE(ubnt_xm_spi_info));
ubnt_xm_pci_init();
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,
"UBNT-XM",
"Ubiquiti Networks XM (rev 1.0) board",
ubnt_xm_init);
/*
* Atheros AR71XX/AR724X/AR913X machine type definitions
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef _ATH79_MACHTYPE_H
#define _ATH79_MACHTYPE_H
#include <asm/mips_machine.h>
enum ath79_mach_type {
ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
};
#endif /* _ATH79_MACHTYPE_H */
...@@ -33,7 +33,6 @@ ...@@ -33,7 +33,6 @@
#include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h" #include "common.h"
#include "dev-common.h" #include "dev-common.h"
#include "machtypes.h"
#define ATH79_SYS_TYPE_LEN 64 #define ATH79_SYS_TYPE_LEN 64
...@@ -236,7 +235,6 @@ void __init plat_mem_setup(void) ...@@ -236,7 +235,6 @@ void __init plat_mem_setup(void)
else if (fw_passed_dtb) else if (fw_passed_dtb)
__dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb)); __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
if (mips_machtype != ATH79_MACH_GENERIC_OF) {
ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE); AR71XX_RESET_SIZE);
ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
...@@ -246,15 +244,12 @@ void __init plat_mem_setup(void) ...@@ -246,15 +244,12 @@ void __init plat_mem_setup(void)
detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
/* OF machines should use the reset driver */
_machine_restart = ath79_restart; _machine_restart = ath79_restart;
}
_machine_halt = ath79_halt; _machine_halt = ath79_halt;
pm_power_off = ath79_halt; pm_power_off = ath79_halt;
} }
static void __init ath79_of_plat_time_init(void) void __init plat_time_init(void)
{ {
struct device_node *np; struct device_node *np;
struct clk *clk; struct clk *clk;
...@@ -284,66 +279,12 @@ static void __init ath79_of_plat_time_init(void) ...@@ -284,66 +279,12 @@ static void __init ath79_of_plat_time_init(void)
clk_put(clk); clk_put(clk);
} }
void __init plat_time_init(void)
{
unsigned long cpu_clk_rate;
unsigned long ahb_clk_rate;
unsigned long ddr_clk_rate;
unsigned long ref_clk_rate;
if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
ath79_of_plat_time_init();
return;
}
ath79_clocks_init();
cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
ref_clk_rate = ath79_get_sys_clk_rate("ref");
pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
mips_hpt_frequency = cpu_clk_rate / 2;
}
void __init arch_init_irq(void) void __init arch_init_irq(void)
{ {
irqchip_init(); irqchip_init();
} }
static int __init ath79_setup(void)
{
if (mips_machtype == ATH79_MACH_GENERIC_OF)
return 0;
ath79_gpio_init();
ath79_register_uart();
ath79_register_wdt();
mips_machine_setup();
return 0;
}
arch_initcall(ath79_setup);
void __init device_tree_init(void) void __init device_tree_init(void)
{ {
unflatten_and_copy_device_tree(); unflatten_and_copy_device_tree();
} }
MIPS_MACHINE(ATH79_MACH_GENERIC,
"Generic",
"Generic AR71XX/AR724X/AR913X based board",
NULL);
MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
"DTB",
"Generic AR71XX/AR724X/AR913X based board (DT)",
NULL);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment