Commit 3a80046a authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://kernel.bkbits.net/gregkh/linux/linus-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux
parents e73291c3 33f0554d
This diff is collapsed.
...@@ -513,7 +513,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) ...@@ -513,7 +513,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
} }
#ifdef CONFIG_PROC_FS #ifdef CONFIG_PROC_FS
#define MAX_OUTPUT (PAGE_SIZE * 16) #define MAX_OUTPUT (64 * 1024)
static struct proc_dir_entry *uhci_proc_root = NULL; static struct proc_dir_entry *uhci_proc_root = NULL;
......
This diff is collapsed.
// Portions of this file taken from
// Petko Manolov - Petkan (petkan@dce.bg)
// from his driver pegasus.h
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define CS_INTERFACE 0x24
#define CDC_ETHER_MAX_MTU 1536
#define CDC_ETHER_PRESENT 0x00000001
#define CDC_ETHER_RUNNING 0x00000002
#define CDC_ETHER_TX_BUSY 0x00000004
#define CDC_ETHER_RX_BUSY 0x00000008
#define CDC_ETHER_UNPLUG 0x00000040
#define CDC_ETHER_TX_TIMEOUT (HZ*10)
#define TX_UNDERRUN 0x80
#define EXCESSIVE_COL 0x40
#define LATE_COL 0x20
#define NO_CARRIER 0x10
#define LOSS_CARRIER 0x08
#define JABBER_TIMEOUT 0x04
#define CDC_ETHER_REQT_READ 0xc0
#define CDC_ETHER_REQT_WRITE 0x40
#define CDC_ETHER_REQ_GET_REGS 0xf0
#define CDC_ETHER_REQ_SET_REGS 0xf1
#define CDC_ETHER_REQ_SET_REG PIPERIDER_REQ_SET_REGS
#define L1_ALIGN(x) x __attribute__((aligned(L1_CACHE_BYTES)))
#define MODE_FLAG_PROMISCUOUS (1<<0)
#define MODE_FLAG_ALL_MULTICAST (1<<1)
#define MODE_FLAG_DIRECTED (1<<2)
#define MODE_FLAG_BROADCAST (1<<3)
#define MODE_FLAG_MULTICAST (1<<4)
#define SET_ETHERNET_MULTICAST_FILTER 0x40
#define SET_ETHERNET_PACKET_FILTER 0x43
typedef struct _ether_dev_t {
struct usb_device *usb;
struct net_device *net;
struct net_device_stats stats;
unsigned flags;
int configuration_num;
int bConfigurationValue;
int comm_interface;
int comm_bInterfaceNumber;
int comm_interface_altset_num;
int comm_bAlternateSetting;
int comm_ep_in;
int data_interface;
int data_bInterfaceNumber;
int data_interface_altset_num_with_traffic;
int data_bAlternateSetting_with_traffic;
int data_interface_altset_num_without_traffic;
int data_bAlternateSetting_without_traffic;
int data_ep_in;
int data_ep_out;
int data_ep_out_size;
__u16 bcdCDC;
__u8 iMACAddress;
__u32 bmEthernetStatistics;
__u16 wMaxSegmentSize;
__u16 mode_flags;
__u16 wNumberMCFilters;
__u8 bNumberPowerFilters;
int intr_interval;
struct urb *rx_urb, *tx_urb, *intr_urb;
unsigned char L1_ALIGN(rx_buff[CDC_ETHER_MAX_MTU]);
unsigned char L1_ALIGN(tx_buff[CDC_ETHER_MAX_MTU]);
unsigned char L1_ALIGN(intr_buff[8]);
} ether_dev_t;
#define REQ_HDR_FUNC_DESCR 0x0001
#define REQ_UNION_FUNC_DESCR 0x0002
#define REQ_ETH_FUNC_DESCR 0x0004
#define REQUIREMENTS_TOTAL 0x0007
...@@ -56,9 +56,11 @@ ...@@ -56,9 +56,11 @@
#include <linux/usb.h> #include <linux/usb.h>
#include <linux/types.h> #include <linux/types.h>
#include <linux/ethtool.h> #include <linux/ethtool.h>
#include <linux/pci.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/semaphore.h> #include <asm/semaphore.h>
#include <asm/byteorder.h> #include <asm/byteorder.h>
#include <asm/dma-mapping.h>
#define DEBUG #define DEBUG
...@@ -215,8 +217,10 @@ struct kaweth_device ...@@ -215,8 +217,10 @@ struct kaweth_device
__u32 status; __u32 status;
int end; int end;
int removed; int removed;
int suspend_lowmem; int suspend_lowmem_rx;
int suspend_lowmem_ctrl;
int linkstate; int linkstate;
struct work_struct lowmem_work;
struct usb_device *dev; struct usb_device *dev;
struct net_device *net; struct net_device *net;
...@@ -475,14 +479,29 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *, int); ...@@ -475,14 +479,29 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *, int);
/**************************************************************** /****************************************************************
int_callback int_callback
*****************************************************************/ *****************************************************************/
static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, int mf)
{
int status;
status = usb_submit_urb (kaweth->irq_urb, mf);
if (unlikely(status == -ENOMEM)) {
kaweth->suspend_lowmem_ctrl = 1;
schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
} else {
kaweth->suspend_lowmem_ctrl = 0;
}
if (status)
err ("can't resubmit intr, %s-%s, status %d",
kaweth->dev->bus->bus_name,
kaweth->dev->devpath, status);
}
static void int_callback(struct urb *u, struct pt_regs *regs) static void int_callback(struct urb *u, struct pt_regs *regs)
{ {
struct kaweth_device *kaweth = u->context; struct kaweth_device *kaweth = u->context;
int act_state, status; int act_state;
/* we abuse the interrupt urb for rebsubmitting under low memory saving a timer */
if (kaweth->suspend_lowmem)
kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
switch (u->status) { switch (u->status) {
case 0: /* success */ case 0: /* success */
...@@ -506,13 +525,24 @@ static void int_callback(struct urb *u, struct pt_regs *regs) ...@@ -506,13 +525,24 @@ static void int_callback(struct urb *u, struct pt_regs *regs)
kaweth->linkstate = act_state; kaweth->linkstate = act_state;
} }
resubmit: resubmit:
status = usb_submit_urb (u, SLAB_ATOMIC); kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
if (status) }
err ("can't resubmit intr, %s-%s, status %d",
kaweth->dev->bus->bus_name, static void kaweth_resubmit_tl(void *d)
kaweth->dev->devpath, status); {
struct kaweth_device *kaweth = (struct kaweth_device *)d;
if (kaweth->status | KAWETH_STATUS_CLOSING)
return;
if (kaweth->suspend_lowmem_rx)
kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
if (kaweth->suspend_lowmem_ctrl)
kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
} }
/**************************************************************** /****************************************************************
* kaweth_resubmit_rx_urb * kaweth_resubmit_rx_urb
****************************************************************/ ****************************************************************/
...@@ -532,11 +562,13 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth, ...@@ -532,11 +562,13 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle; kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) { if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
if (result == -ENOMEM) if (result == -ENOMEM) {
kaweth->suspend_lowmem = 1; kaweth->suspend_lowmem_rx = 1;
schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
}
kaweth_err("resubmitting rx_urb %d failed", result); kaweth_err("resubmitting rx_urb %d failed", result);
} else { } else {
kaweth->suspend_lowmem = 0; kaweth->suspend_lowmem_rx = 0;
} }
return result; return result;
...@@ -665,6 +697,13 @@ static int kaweth_close(struct net_device *net) ...@@ -665,6 +697,13 @@ static int kaweth_close(struct net_device *net)
usb_unlink_urb(kaweth->irq_urb); usb_unlink_urb(kaweth->irq_urb);
usb_unlink_urb(kaweth->rx_urb); usb_unlink_urb(kaweth->rx_urb);
flush_scheduled_work();
/* a scheduled work may have resubmitted,
we hit them again */
usb_unlink_urb(kaweth->irq_urb);
usb_unlink_urb(kaweth->rx_urb);
kaweth->status &= ~KAWETH_STATUS_CLOSING; kaweth->status &= ~KAWETH_STATUS_CLOSING;
return 0; return 0;
...@@ -1075,10 +1114,15 @@ static int kaweth_probe( ...@@ -1075,10 +1114,15 @@ static int kaweth_probe(
memset(&kaweth->stats, 0, sizeof(kaweth->stats)); memset(&kaweth->stats, 0, sizeof(kaweth->stats));
INIT_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl, (void *)kaweth);
SET_MODULE_OWNER(netdev); SET_MODULE_OWNER(netdev);
usb_set_intfdata(intf, kaweth); usb_set_intfdata(intf, kaweth);
if (dma_supported (&intf->dev, 0xffffffffffffffffULL))
kaweth->net->features |= NETIF_F_HIGHDMA;
if (register_netdev(netdev) != 0) { if (register_netdev(netdev) != 0) {
kaweth_err("Error calling init_etherdev."); kaweth_err("Error calling init_etherdev.");
goto err_intfdata; goto err_intfdata;
...@@ -1092,7 +1136,6 @@ static int kaweth_probe( ...@@ -1092,7 +1136,6 @@ static int kaweth_probe(
err_intfdata: err_intfdata:
usb_set_intfdata(intf, NULL); usb_set_intfdata(intf, NULL);
err_all:
usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle); usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
err_all_but_rxbuf: err_all_but_rxbuf:
usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle); usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
......
...@@ -412,6 +412,7 @@ struct divisor_table_entry { ...@@ -412,6 +412,7 @@ struct divisor_table_entry {
// MCR.7 = 0. // MCR.7 = 0.
// //
static struct divisor_table_entry divisor_table[] = { static struct divisor_table_entry divisor_table[] = {
{ 50, 4608},
{ 75, 3072}, { 75, 3072},
{ 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */
{ 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */
...@@ -2591,7 +2592,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) ...@@ -2591,7 +2592,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor)
// We have tried all of the standard baud rates // We have tried all of the standard baud rates
// lets try to calculate the divisor for this baud rate // lets try to calculate the divisor for this baud rate
// Make sure the baud rate is reasonable // Make sure the baud rate is reasonable
if (baudrate > 75 && baudrate < 230400) { if (baudrate < 230400) {
// get divisor // get divisor
custom = (__u16)(230400L / baudrate); custom = (__u16)(230400L / baudrate);
......
...@@ -537,16 +537,20 @@ static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file) ...@@ -537,16 +537,20 @@ static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file)
struct pl2303_private *priv = usb_get_serial_port_data(port); struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags; unsigned long flags;
unsigned int mcr; unsigned int mcr;
unsigned int status;
unsigned int result; unsigned int result;
dbg("%s (%d)", __FUNCTION__, port->number); dbg("%s (%d)", __FUNCTION__, port->number);
spin_lock_irqsave (&priv->lock, flags); spin_lock_irqsave (&priv->lock, flags);
mcr = priv->line_control; mcr = priv->line_control;
status = priv->line_status;
spin_unlock_irqrestore (&priv->lock, flags); spin_unlock_irqrestore (&priv->lock, flags);
result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
| ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0); | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
| ((status & UART_CTS) ? TIOCM_CTS : 0)
| ((status & UART_DSR) ? TIOCM_DSR : 0);
dbg("%s - result = %x", __FUNCTION__, result); dbg("%s - result = %x", __FUNCTION__, result);
......
...@@ -12,6 +12,10 @@ ...@@ -12,6 +12,10 @@
* *
* See Documentation/usb/usb-serial.txt for more information on using this driver * See Documentation/usb/usb-serial.txt for more information on using this driver
* *
* (06/03/2003) Judd Montgomery <judd at jpilot.org>
* Added support for module parameter options for untested/unknown
* devices.
*
* (03/09/2003) gkh * (03/09/2003) gkh
* Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
* <brachtl@redgrep.cz> for the information. * <brachtl@redgrep.cz> for the information.
...@@ -188,6 +192,9 @@ static int treo_attach (struct usb_serial *serial); ...@@ -188,6 +192,9 @@ static int treo_attach (struct usb_serial *serial);
static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id); static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id);
static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id); static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id);
/* Parameters that may be passed into the module. */
static int vendor = -1;
static int product = -1;
static struct usb_device_id id_table [] = { static struct usb_device_id id_table [] = {
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
...@@ -223,6 +230,7 @@ static struct usb_device_id id_table [] = { ...@@ -223,6 +230,7 @@ static struct usb_device_id id_table [] = {
.driver_info = (kernel_ulong_t)&palm_os_4_probe }, .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID), { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe }, .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ }, /* optional parameter entry */
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
...@@ -250,6 +258,7 @@ static struct usb_device_id id_table_combined [] = { ...@@ -250,6 +258,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
{ }, /* optional parameter entry */
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
...@@ -942,6 +951,33 @@ static void visor_set_termios (struct usb_serial_port *port, struct termios *old ...@@ -942,6 +951,33 @@ static void visor_set_termios (struct usb_serial_port *port, struct termios *old
static int __init visor_init (void) static int __init visor_init (void)
{ {
int i;
/* Only if parameters were passed to us */
if ((vendor>0) && (product>0)) {
struct usb_device_id usb_dev_temp[]=
{{USB_DEVICE(vendor, product),
.driver_info = (kernel_ulong_t)&palm_os_4_probe }};
/* Find the last entry in id_table */
for (i=0; ; i++) {
if (id_table[i].idVendor==0) {
id_table[i] = usb_dev_temp[0];
break;
}
}
/* Find the last entry in id_table_combined */
for (i=0; ; i++) {
if (id_table_combined[i].idVendor==0) {
id_table_combined[i] = usb_dev_temp[0];
break;
}
}
info("Untested USB device specified at time of module insertion");
info("Warning: This is not guaranteed to work");
info("Using a newer kernel is preferred to this method");
info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
vendor, product);
}
usb_serial_register (&handspring_device); usb_serial_register (&handspring_device);
usb_serial_register (&clie_3_5_device); usb_serial_register (&clie_3_5_device);
usb_register (&visor_driver); usb_register (&visor_driver);
...@@ -969,3 +1005,7 @@ MODULE_LICENSE("GPL"); ...@@ -969,3 +1005,7 @@ MODULE_LICENSE("GPL");
MODULE_PARM(debug, "i"); MODULE_PARM(debug, "i");
MODULE_PARM_DESC(debug, "Debug enabled or not"); MODULE_PARM_DESC(debug, "Debug enabled or not");
MODULE_PARM(vendor, "i");
MODULE_PARM_DESC(vendor, "User specified vendor ID");
MODULE_PARM(product, "i");
MODULE_PARM_DESC(product, "User specified product ID");
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
#include <linux/errno.h> #include <linux/errno.h>
#include "initializers.h" #include "initializers.h"
#include "debug.h" #include "debug.h"
#include "transport.h"
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */ * mode */
...@@ -59,4 +60,50 @@ int usb_stor_euscsi_init(struct us_data *us) ...@@ -59,4 +60,50 @@ int usb_stor_euscsi_init(struct us_data *us)
return 0; return 0;
} }
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us)
{
struct bulk_cb_wrap *bcb;
struct bulk_cs_wrap *bcs;
int res, partial;
bcb = kmalloc(sizeof *bcb, in_interrupt() ? GFP_ATOMIC : GFP_NOIO);
if (!bcb) {
return(-1);
}
bcs = kmalloc(sizeof *bcs, in_interrupt() ? GFP_ATOMIC : GFP_NOIO);
if (!bcs) {
kfree(bcb);
return(-1);
}
US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->Tag = 0;
bcb->DataTransferLength = cpu_to_le32(0);
bcb->Flags = bcb->Lun = 0;
bcb->Length = sizeof(UCR61S2B_INIT);
memset(bcb->CDB, 0, sizeof(bcb->CDB));
memcpy(bcb->CDB, UCR61S2B_INIT, sizeof(UCR61S2B_INIT));
res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
US_BULK_CB_WRAP_LEN, &partial);
US_DEBUGP("-- result is %d\n", res);
kfree(bcb);
if(res) {
kfree(bcs);
return(res);
}
res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
US_BULK_CS_WRAP_LEN, &partial);
US_DEBUGP("-- result of status read is %d\n", res);
kfree(bcs);
return(res ? -1 : 0);
}
...@@ -48,3 +48,9 @@ int usb_stor_euscsi_init(struct us_data *us); ...@@ -48,3 +48,9 @@ int usb_stor_euscsi_init(struct us_data *us);
#ifdef CONFIG_USB_STORAGE_SDDR09 #ifdef CONFIG_USB_STORAGE_SDDR09
int sddr09_init(struct us_data *us); int sddr09_init(struct us_data *us);
#endif #endif
#define UCR61S2B_INIT "\xec\x0a\x06\x00$PCCHIPS"
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
...@@ -595,6 +595,16 @@ UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100, ...@@ -595,6 +595,16 @@ UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100,
US_SC_SCSI, US_PR_BULK, NULL, US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY ), US_FL_FIX_INQUIRY ),
/* Pentax Optio S digital camera
* adapted from http://www2.goldfisch.at/knowledge/233
* (Peter Pilsl <pilsl@goldfisch.at>)
* by Christoph Weidemann <cweidema@indiana.edu> */
UNUSUAL_DEV( 0x0a17, 0x0006, 0x0000, 0xffff,
"Pentax",
"Optio S",
US_SC_8070, US_PR_CB, NULL,
US_FL_MODE_XLATE|US_FL_FIX_INQUIRY),
#ifdef CONFIG_USB_STORAGE_ISD200 #ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI", "ATI",
...@@ -610,6 +620,16 @@ UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x0001, ...@@ -610,6 +620,16 @@ UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x0001,
US_SC_SCSI, US_PR_BULK, NULL, US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE | US_FL_FIX_INQUIRY ), US_FL_MODE_XLATE | US_FL_FIX_INQUIRY ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
*/
UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
/* Reported by Dan Pilone <pilone@slac.com> /* Reported by Dan Pilone <pilone@slac.com>
* The device needs the flags only. * The device needs the flags only.
* Also reported by Brian Hall <brihall@pcisys.net>, again for flags. * Also reported by Brian Hall <brihall@pcisys.net>, again for flags.
......
...@@ -10,11 +10,6 @@ ...@@ -10,11 +10,6 @@
* All Rights Reserved. * All Rights Reserved.
* *
* This software is licensed under the GNU GPL version 2. * This software is licensed under the GNU GPL version 2.
*
* ALTERNATIVELY, the kernel API documentation which is included in this
* software may also be licenced under the "GNU Free Documentation
* License" (version 1.2 or, at your choice, any later version), when
* used as part of the "USB Gadget API for Linux" documentation.
*/ */
#ifndef __LINUX_USB_GADGET_H #ifndef __LINUX_USB_GADGET_H
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment