[PATCH] ppc32: add support for Marvell EV64360BP board

This patch adds support for Marvell EV64360BP board.  So far, it supports
mpsc serial console, gigabit ethernet, jffs2 root filesystem, etc.  Other
device support, like watchdog, RTC, will be added later.
Signed-off-by: Lee Nicks <allinux@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/Kconfig

@@ -671,6 +671,11 @@ config MPC834x_SYS
 	help
 	  This option enables support for the MPC 834x SYS evaluation board.
 
+config EV64360
+	bool "Marvell-EV64360BP"
+	help
+	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
+	  platform.
 endchoice
 
 config PQ2ADS
@@ -772,7 +777,7 @@ config GT64260
 
 config MV64360		# Really MV64360 & MV64460
 	bool
-	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
+	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
 	default y
 
 config MV64X60

arch/ppc/boot/simple/Makefile

@@ -104,6 +104,10 @@ zimageinitrd-$(CONFIG_GEMINI)		:= zImage.initrd-STRIPELF
          end-$(CONFIG_RADSTONE_PPC7D)	:= radstone_ppc7d
    cacheflag-$(CONFIG_RADSTONE_PPC7D)	:= -include $(clear_L2_L3)
 
+     extra.o-$(CONFIG_EV64360)          := misc-ev64360.o
+         end-$(CONFIG_EV64360)          := ev64360
+   cacheflag-$(CONFIG_EV64360)          := -include $(clear_L2_L3)
+
 # kconfig 'feature', only one of these will ever be 'y' at a time.
 # The rest will be unset.
 motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \

arch/ppc/boot/simple/misc-ev64360.c

+/*
+ * arch/ppc/boot/simple/misc-ev64360.c
+ * Copyright (C) 2005 Lee Nicks <allinux@gmail.com>
+ *
+ * Based on arch/ppc/boot/simple/misc-katana.c from:
+ * Mark A. Greer <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/mv64x60_defs.h>
+#include <platforms/ev64360.h>
+
+extern u32 mv64x60_console_baud;
+extern u32 mv64x60_mpsc_clk_src;
+extern u32 mv64x60_mpsc_clk_freq;
+
+/* Not in the kernel so won't include kernel.h to get its 'min' definition */
+#ifndef min
+#define	min(a,b)	(((a) < (b)) ? (a) : (b))
+#endif
+
+void
+mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
+{
+	mv64x60_console_baud  = EV64360_DEFAULT_BAUD;
+	mv64x60_mpsc_clk_src  = EV64360_MPSC_CLK_SRC;
+	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
+}

arch/ppc/boot/simple/mv64x60_tty.c

@@ -22,9 +22,16 @@
 #include <asm/mv64x60_defs.h>
 #include <mpsc_defs.h>
 
+#ifdef CONFIG_EV64360
+#include <platforms/ev64360.h>
+u32	mv64x60_console_baud = EV64360_DEFAULT_BAUD;
+u32	mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */
+u32	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
+#else
 u32	mv64x60_console_baud = 9600;
 u32	mv64x60_mpsc_clk_src = 8; /* TCLK */
 u32	mv64x60_mpsc_clk_freq = 100000000;
+#endif
 
 extern void udelay(long);
 static void stop_dma(int chan);

arch/ppc/platforms/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_SANDPOINT)		+= sandpoint.o
 obj-$(CONFIG_SBC82xx)		+= sbc82xx.o
 obj-$(CONFIG_SPRUCE)		+= spruce.o
 obj-$(CONFIG_LITE5200)		+= lite5200.o
+obj-$(CONFIG_EV64360)		+= ev64360.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_PMAC)		+= pmac_smp.o

arch/ppc/platforms/ev64360.c

+/*
+ * arch/ppc/platforms/ev64360.c
+ *
+ * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
+ *
+ * Author: Lee Nicks <allinux@gmail.com>
+ *
+ * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
+ * Based on code done by - Mark A. Greer <mgreer@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/bootmem.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx.h>
+#ifdef CONFIG_BOOTIMG
+#include <linux/bootimg.h>
+#endif
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppcboot.h>
+#include <asm/mv64x60.h>
+#include <platforms/ev64360.h>
+
+#define BOARD_VENDOR    "Marvell"
+#define BOARD_MACHINE   "EV-64360-BP"
+
+static struct		mv64x60_handle bh;
+static void __iomem	*sram_base;
+
+static u32		ev64360_flash_size_0;
+static u32		ev64360_flash_size_1;
+
+static u32		ev64360_bus_frequency;
+
+unsigned char	__res[sizeof(bd_t)];
+
+static int __init
+ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	return 0;
+}
+
+static void __init
+ev64360_setup_bridge(void)
+{
+	struct mv64x60_setup_info si;
+	int i;
+
+	memset(&si, 0, sizeof(si));
+
+	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
+
+	#ifdef CONFIG_PCI
+	si.pci_1.enable_bus = 1;
+	si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
+	si.pci_1.pci_io.pci_base_hi = 0;
+	si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
+	si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
+	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
+	si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
+	si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
+	si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
+	si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
+	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
+	si.pci_1.pci_cmd_bits = 0;
+	si.pci_1.latency_timer = 0x80;
+	#else
+	si.pci_0.enable_bus = 0;
+	si.pci_1.enable_bus = 0;
+	#endif
+
+	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+		si.cpu_prot_options[i] = 0;
+		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
+		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
+		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
+
+		si.pci_1.acc_cntl_options[i] =
+		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
+		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
+		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
+		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+#else
+		si.cpu_prot_options[i] = 0;
+		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
+		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
+		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
+
+		si.pci_1.acc_cntl_options[i] =
+		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
+		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
+		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
+		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+#endif
+	}
+
+	if (mv64x60_init(&bh, &si))
+		printk(KERN_WARNING "Bridge initialization failed.\n");
+
+	#ifdef CONFIG_PCI
+	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = ev64360_map_irq;
+	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
+
+	mv64x60_set_bus(&bh, 1, 0);
+	bh.hose_b->first_busno = 0;
+	bh.hose_b->last_busno = 0xff;
+	#endif
+}
+
+/* Bridge & platform setup routines */
+void __init
+ev64360_intr_setup(void)
+{
+	/* MPP 8, 9, and 10 */
+	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
+
+	/*
+	 * Define GPP 8,9,and 10 interrupt polarity as active low
+	 * input signal and level triggered
+	 */
+	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
+	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
+
+	/* Config GPP intr ctlr to respond to level trigger */
+	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
+
+	/* Erranum FEr PCI-#8 */
+	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
+	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
+
+	/*
+	 * Dismiss and then enable interrupt on GPP interrupt cause
+	 * for CPU #0
+	 */
+	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
+	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
+
+	/*
+	 * Dismiss and then enable interrupt on CPU #0 high cause reg
+	 * BIT25 summarizes GPP interrupts 8-15
+	 */
+	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
+}
+
+void __init
+ev64360_setup_peripherals(void)
+{
+	u32 base;
+
+	/* Set up window for boot CS */
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
+		 EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
+
+	/* We only use the 32-bit flash */
+	mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
+		&ev64360_flash_size_0);
+	ev64360_flash_size_1 = 0;
+
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
+		 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
+
+	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
+		 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
+	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
+	sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
+
+	/* Set up Enet->SRAM window */
+	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
+		EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
+	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
+
+	/* Give enet r/w access to memory region */
+	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
+	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
+	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
+
+	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
+	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
+			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
+
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
+#else
+	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
+#endif
+
+	/*
+	 * Setting the SRAM to 0. Note that this generates parity errors on
+	 * internal data path in SRAM since it's first time accessing it
+	 * while after reset it's not configured.
+	 */
+	memset(sram_base, 0, MV64360_SRAM_SIZE);
+
+	/* set up PCI interrupt controller */
+	ev64360_intr_setup();
+}
+
+static void __init
+ev64360_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("ev64360_setup_arch: enter", 0);
+
+	set_tb(0, 0);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef   CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_SDA2;
+#endif
+
+	/*
+	 * Set up the L2CR register.
+	 */
+	_set_L2CR(L2CR_L2E | L2CR_L2PE);
+
+	if (ppc_md.progress)
+		ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
+
+	ev64360_setup_bridge();
+	ev64360_setup_peripherals();
+	ev64360_bus_frequency = ev64360_bus_freq();
+
+	printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
+		"(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE);
+	if (ppc_md.progress)
+		ppc_md.progress("ev64360_setup_arch: exit", 0);
+}
+
+/* Platform device data fixup routines. */
+#if defined(CONFIG_SERIAL_MPSC)
+static void __init
+ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
+{
+	struct mpsc_pdata *pdata;
+
+	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
+
+	pdata->max_idle = 40;
+	pdata->default_baud = EV64360_DEFAULT_BAUD;
+	pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
+	/*
+	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
+	 * TCLK == SysCLK but on 64460, they are separate pins.
+	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
+	 */
+	pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
+}
+#endif
+
+#if defined(CONFIG_MV643XX_ETH)
+static void __init
+ev64360_fixup_eth_pdata(struct platform_device *pdev)
+{
+	struct mv643xx_eth_platform_data *eth_pd;
+	static u16 phy_addr[] = {
+		EV64360_ETH0_PHY_ADDR,
+		EV64360_ETH1_PHY_ADDR,
+		EV64360_ETH2_PHY_ADDR,
+	};
+
+	eth_pd = pdev->dev.platform_data;
+	eth_pd->force_phy_addr = 1;
+	eth_pd->phy_addr = phy_addr[pdev->id];
+	eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
+	eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
+}
+#endif
+
+static int __init
+ev64360_platform_notify(struct device *dev)
+{
+	static struct {
+		char	*bus_id;
+		void	((*rtn)(struct platform_device *pdev));
+	} dev_map[] = {
+#if defined(CONFIG_SERIAL_MPSC)
+		{ MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
+		{ MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
+#endif
+#if defined(CONFIG_MV643XX_ETH)
+		{ MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
+		{ MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
+		{ MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
+#endif
+	};
+	struct platform_device	*pdev;
+	int	i;
+
+	if (dev && dev->bus_id)
+		for (i=0; i<ARRAY_SIZE(dev_map); i++)
+			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
+				BUS_ID_SIZE)) {
+
+				pdev = container_of(dev,
+					struct platform_device, dev);
+				dev_map[i].rtn(pdev);
+			}
+
+	return 0;
+}
+
+#ifdef CONFIG_MTD_PHYSMAP
+
+#ifndef MB
+#define MB	(1 << 20)
+#endif
+
+/*
+ * MTD Layout.
+ *
+ * FLASH Amount:	0xff000000 - 0xffffffff
+ * -------------	-----------------------
+ * Reserved:		0xff000000 - 0xff03ffff
+ * JFFS2 file system:	0xff040000 - 0xffefffff
+ * U-boot:		0xfff00000 - 0xffffffff
+ */
+static int __init
+ev64360_setup_mtd(void)
+{
+	u32	size;
+	int	ptbl_entries;
+	static struct mtd_partition	*ptbl;
+
+	size = ev64360_flash_size_0 + ev64360_flash_size_1;
+	if (!size)
+		return -ENOMEM;
+
+	ptbl_entries = 3;
+
+	if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition),
+		GFP_KERNEL)) == NULL) {
+
+		printk(KERN_WARNING "Can't alloc MTD partition table\n");
+		return -ENOMEM;
+	}
+	memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition));
+
+	ptbl[0].name = "reserved";
+	ptbl[0].offset = 0;
+	ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
+	ptbl[1].name = "jffs2";
+	ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
+	ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
+	ptbl[2].name = "U-BOOT";
+	ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
+	ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
+
+	physmap_map.size = size;
+	physmap_set_partitions(ptbl, ptbl_entries);
+	return 0;
+}
+
+arch_initcall(ev64360_setup_mtd);
+#endif
+
+static void
+ev64360_restart(char *cmd)
+{
+	ulong	i = 0xffffffff;
+	volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
+
+	/* issue hard reset */
+	rtc_base[0xf] = 0x80;
+	rtc_base[0xc] = 0x00;
+	rtc_base[0xd] = 0x01;
+	rtc_base[0xf] = 0x83;
+
+	while (i-- > 0) ;
+	panic("restart failed\n");
+}
+
+static void
+ev64360_halt(void)
+{
+	while (1) ;
+	/* NOTREACHED */
+}
+
+static void
+ev64360_power_off(void)
+{
+	ev64360_halt();
+	/* NOTREACHED */
+}
+
+static int
+ev64360_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
+	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
+	seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
+
+	return 0;
+}
+
+static void __init
+ev64360_calibrate_decr(void)
+{
+	u32 freq;
+
+	freq = ev64360_bus_frequency / 4;
+
+	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+	       (long)freq / 1000000, (long)freq % 1000000);
+
+	tb_ticks_per_jiffy = freq / HZ;
+	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+}
+
+unsigned long __init
+ev64360_find_end_of_memory(void)
+{
+	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
+		MV64x60_TYPE_MV64360);
+}
+
+static inline void
+ev64360_set_bat(void)
+{
+	mb();
+	mtspr(SPRN_DBAT2U, 0xf0001ffe);
+	mtspr(SPRN_DBAT2L, 0xf000002a);
+	mb();
+}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
+static void __init
+ev64360_map_io(void)
+{
+	io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
+			 CONFIG_MV64X60_NEW_BASE, \
+			 0x00020000, _PAGE_IO);
+}
+#endif
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
+	 * are non-zero, then we should use the board info from the bd_t
+	 * structure and the cmdline pointed to by r6 instead of the
+	 * information from birecs, if any.  Otherwise, use the information
+	 * from birecs as discovered by the preceeding call to
+	 * parse_bootinfo().  This rule should work with both PPCBoot, which
+	 * uses a bd_t board info structure, and the kernel boot wrapper,
+	 * which uses birecs.
+	 */
+	if (r3 && r6) {
+		/* copy board info structure */
+		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+		/* copy command line */
+		*(char *)(r7+KERNELBASE) = 0;
+		strcpy(cmd_line, (char *)(r6+KERNELBASE));
+	}
+	#ifdef CONFIG_ISA
+	isa_mem_base = 0;
+	#endif
+
+	ppc_md.setup_arch = ev64360_setup_arch;
+	ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
+	ppc_md.init_IRQ = mv64360_init_irq;
+	ppc_md.get_irq = mv64360_get_irq;
+	ppc_md.restart = ev64360_restart;
+	ppc_md.power_off = ev64360_power_off;
+	ppc_md.halt = ev64360_halt;
+	ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
+	ppc_md.calibrate_decr = ev64360_calibrate_decr;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	ppc_md.setup_io_mappings = ev64360_map_io;
+	ppc_md.progress = mv64x60_mpsc_progress;
+	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
+#endif
+
+#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
+	platform_notify = ev64360_platform_notify;
+#endif
+
+	ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */
+}

arch/ppc/platforms/ev64360.h

+/*
+ * arch/ppc/platforms/ev64360.h
+ *
+ * Definitions for Marvell EV-64360-BP Evaluation Board.
+ *
+ * Author: Lee Nicks <allinux@gmail.com>
+ *
+ * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
+ * Based on code done by Mark A. Greer <mgreer@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
+ * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
+ * We'll only use one PCI MEM window on each PCI bus.
+ *
+ * This is the CPU physical memory map (windows must be at least 64KB and start
+ * on a boundary that is a multiple of the window size):
+ *
+ *    0x42000000-0x4203ffff      - Internal SRAM
+ *    0xf1000000-0xf100ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
+ *    0xfc800000-0xfcffffff      - RTC
+ *    0xff000000-0xffffffff      - Boot window, 16 MB flash
+ *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
+ *    0x80000000-0xbfffffff      - PCI MEM (second hose)
+ */
+
+#ifndef __PPC_PLATFORMS_EV64360_H
+#define __PPC_PLATFORMS_EV64360_H
+
+/* CPU Physical Memory Map setup. */
+#define EV64360_BOOT_WINDOW_BASE		0xff000000
+#define EV64360_BOOT_WINDOW_SIZE		0x01000000 /* 16 MB */
+#define EV64360_INTERNAL_SRAM_BASE		0x42000000
+#define EV64360_RTC_WINDOW_BASE			0xfc800000
+#define EV64360_RTC_WINDOW_SIZE			0x00800000 /* 8 MB */
+
+#define EV64360_PCI1_MEM_START_PROC_ADDR	0x80000000
+#define EV64360_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
+#define EV64360_PCI1_MEM_START_PCI_LO_ADDR	0x80000000
+#define EV64360_PCI1_MEM_SIZE			0x40000000 /* 1 GB */
+#define EV64360_PCI1_IO_START_PROC_ADDR		0xc0000000
+#define EV64360_PCI1_IO_START_PCI_ADDR		0x00000000
+#define EV64360_PCI1_IO_SIZE			0x04000000 /* 64 MB */
+
+#define	EV64360_DEFAULT_BAUD			115200
+#define	EV64360_MPSC_CLK_SRC			8	  /* TCLK */
+#define EV64360_MPSC_CLK_FREQ			133333333
+
+#define	EV64360_MTD_RESERVED_SIZE		0x40000
+#define EV64360_MTD_JFFS2_SIZE			0xec0000
+#define EV64360_MTD_UBOOT_SIZE			0x100000
+
+#define	EV64360_ETH0_PHY_ADDR			8
+#define	EV64360_ETH1_PHY_ADDR			9
+#define	EV64360_ETH2_PHY_ADDR			10
+
+#define EV64360_ETH_TX_QUEUE_SIZE		800
+#define EV64360_ETH_RX_QUEUE_SIZE		400
+
+#define	EV64360_ETH_PORT_CONFIG_VALUE			\
+	ETH_UNICAST_NORMAL_MODE			|	\
+	ETH_DEFAULT_RX_QUEUE_0			|	\
+	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
+	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
+	ETH_RECEIVE_BC_IF_IP			|	\
+	ETH_RECEIVE_BC_IF_ARP			|	\
+	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
+	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
+	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
+	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
+	ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+#define	EV64360_ETH_PORT_CONFIG_EXTEND_VALUE		\
+	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
+	ETH_PARTITION_DISABLE
+
+#define	GT_ETH_IPG_INT_RX(value)			\
+	((value & 0x3fff) << 8)
+
+#define	EV64360_ETH_PORT_SDMA_CONFIG_VALUE		\
+	ETH_RX_BURST_SIZE_4_64BIT		|	\
+	GT_ETH_IPG_INT_RX(0)			|	\
+	ETH_TX_BURST_SIZE_4_64BIT
+
+#define	EV64360_ETH_PORT_SERIAL_CONTROL_VALUE		\
+	ETH_FORCE_LINK_PASS			|	\
+	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
+	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
+	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
+	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
+	ETH_FORCE_BP_MODE_NO_JAM		|	\
+	BIT9					|	\
+	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
+	ETH_RETRANSMIT_16_ATTEMPTS		|	\
+	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
+	ETH_DTE_ADV_0				|	\
+	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
+	ETH_AUTO_NEG_NO_CHANGE			|	\
+	ETH_MAX_RX_PACKET_9700BYTE		|	\
+	ETH_CLR_EXT_LOOPBACK			|	\
+	ETH_SET_FULL_DUPLEX_MODE		|	\
+	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
+
+static inline u32
+ev64360_bus_freq(void)
+{
+	return 133333333;
+}
+
+#endif	/* __PPC_PLATFORMS_EV64360_H */