Commit 3aebee02 authored by Amitkumar Karwar's avatar Amitkumar Karwar Committed by John W. Linville

mwifiex: fix issues in band configuration code

Currently due to following issues in the code even if device is
configured in B only, G only or BG mode using iw bitrates command,
ibss is getting created in BGN mode.

1) mwifiex_channels_to_cfg80211_channel_type() routine gives channel
type as NL80211_CHAN_HT20 for non-HT channel as well, because driver
doesn't store HT information provided by stack for the channel.
This issue is fixed by maintaining channel type information in
'adapter->channel_type'.
2) Band configuration is unnecessarily overwritten with BGN/AN while
setting channel.

This patch makes sure that "adapter->config_bands" correctly gets
modified while setting channel.
Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 21c3ba34
......@@ -47,30 +47,6 @@ mwifiex_cfg80211_channel_type_to_sec_chan_offset(enum nl80211_channel_type
}
}
/*
* This function maps the driver channel type into nl802.11 channel type.
*
* The mapping is as follows -
* IEEE80211_HT_PARAM_CHA_SEC_NONE -> NL80211_CHAN_HT20
* IEEE80211_HT_PARAM_CHA_SEC_ABOVE -> NL80211_CHAN_HT40PLUS
* IEEE80211_HT_PARAM_CHA_SEC_BELOW -> NL80211_CHAN_HT40MINUS
* Others -> NL80211_CHAN_HT20
*/
static enum nl80211_channel_type
mwifiex_channels_to_cfg80211_channel_type(int channel_type)
{
switch (channel_type) {
case IEEE80211_HT_PARAM_CHA_SEC_NONE:
return NL80211_CHAN_HT20;
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
return NL80211_CHAN_HT40PLUS;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
return NL80211_CHAN_HT40MINUS;
default:
return NL80211_CHAN_HT20;
}
}
/*
* This function checks whether WEP is set.
*/
......@@ -337,10 +313,22 @@ mwifiex_set_rf_channel(struct mwifiex_private *priv,
if (chan) {
/* Set appropriate bands */
if (chan->band == IEEE80211_BAND_2GHZ)
if (chan->band == IEEE80211_BAND_2GHZ) {
if (channel_type == NL80211_CHAN_NO_HT)
if (priv->adapter->config_bands == BAND_B ||
priv->adapter->config_bands == BAND_G)
config_bands =
priv->adapter->config_bands;
else
config_bands = BAND_B | BAND_G;
else
config_bands = BAND_B | BAND_G | BAND_GN;
} else {
if (channel_type == NL80211_CHAN_NO_HT)
config_bands = BAND_A;
else
config_bands = BAND_AN | BAND_A;
}
if (!((config_bands | adapter->fw_bands) &
~adapter->fw_bands)) {
......@@ -357,6 +345,7 @@ mwifiex_set_rf_channel(struct mwifiex_private *priv,
adapter->sec_chan_offset =
mwifiex_cfg80211_channel_type_to_sec_chan_offset
(channel_type);
adapter->channel_type = channel_type;
mwifiex_send_domain_info_cmd_fw(wiphy);
}
......@@ -730,6 +719,7 @@ static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
}
}
adapter->sec_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
adapter->channel_type = NL80211_CHAN_NO_HT;
wiphy_debug(wiphy, "info: device configured in 802.11%s%s mode\n",
(mode & BAND_B) ? "b" : "",
......@@ -849,8 +839,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
if (channel)
ret = mwifiex_set_rf_channel(priv, channel,
mwifiex_channels_to_cfg80211_channel_type
(priv->adapter->sec_chan_offset));
priv->adapter->channel_type);
ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */
......
......@@ -641,6 +641,7 @@ struct mwifiex_adapter {
u8 hw_dev_mcs_support;
u8 adhoc_11n_enabled;
u8 sec_chan_offset;
enum nl80211_channel_type channel_type;
struct mwifiex_dbg dbg;
u8 arp_filter[ARP_FILTER_MAX_BUF_SIZE];
u32 arp_filter_size;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment