Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "There's been quite a lot of generic activity here, but more
  administrative than featuers. We also have a bunch of new drivers,
  including one that's part of a MFD so we pulled in the core parts of
  that:

   - Lots of work from both Yang Yingliang and Andy Shevchenko on moving
     to host/device/controller based terminology for devices.

   - QuadSPI SPI support for Allwinner sun6i.

   - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
     QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
  spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
  spi: spi-sn-f-ospi: switch to use modern name
  spi: sifive: switch to use modern name
  spi: sh: switch to use modern name
  spi: sh-sci: switch to use modern name
  spi: sh-msiof: switch to use modern name
  spi: sh-hspi: switch to use modern name
  spi: sc18is602: switch to use modern name
  spi: s3c64xx: switch to use modern name
  spi: rzv2m-csi: switch to use devm_spi_alloc_host()
  spi: rspi: switch to use spi_alloc_host()
  spi: rockchip: switch to use modern name
  spi: rockchip-sfc: switch to use modern name
  spi: realtek-rtl: switch to use devm_spi_alloc_host()
  spi: rb4xx: switch to use modern name
  spi: qup: switch to use modern name
  spi: spi-qcom-qspi: switch to use modern name
  spi: pxa2xx: switch to use modern name
  spi: ppc4xx: switch to use modern name
  spi: spl022: switch to use modern name
  ...

Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L43 Audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
+  (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
+  for portable applications. It provides a high dynamic range, stereo
+  DAC for headphone output, two integrated Class D amplifiers for
+  loudspeakers, and two ADCs for wired headset microphone input or
+  stereo line input. PDM inputs are provided for digital microphones.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l43
+
+  reg:
+    maxItems: 1
+
+  vdd-p-supply:
+    description:
+      Power supply for the high voltage interface.
+
+  vdd-a-supply:
+    description:
+      Power supply for internal analog circuits.
+
+  vdd-d-supply:
+    description:
+      Power supply for internal digital circuits. Can be internally supplied.
+
+  vdd-io-supply:
+    description:
+      Power supply for external interface and internal digital logic.
+
+  vdd-cp-supply:
+    description:
+      Power supply for the amplifier 3 and 4 charge pump.
+
+  vdd-amp-supply:
+    description:
+      Power supply for amplifier 1 and 2.
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: Synchronous audio clock provided on mclk_in.
+
+  clock-names:
+    const: mclk
+
+  cirrus,bias-low:
+    type: boolean
+    description:
+      Select a 1.8V headset micbias rather than 2.8V.
+
+  cirrus,bias-sense-microamp:
+    description:
+      Current at which the headset micbias sense clamp will engage, 0 to
+      disable.
+    enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ]
+    default: 0
+
+  cirrus,bias-ramp-ms:
+    description:
+      Time in milliseconds the hardware allows for the headset micbias to
+      ramp up.
+    enum: [ 10, 40, 90, 170 ]
+    default: 170
+
+  cirrus,detect-us:
+    description:
+      Time in microseconds the type detection will run for. Long values will
+      cause more audible effects, but give more accurate detection.
+    enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ]
+    default: 10000
+
+  cirrus,button-automute:
+    type: boolean
+    description:
+      Enable the hardware automuting of decimator 1 when a headset button is
+      pressed.
+
+  cirrus,buttons-ohms:
+    description:
+      Impedance in Ohms for each headset button, these should be listed in
+      ascending order.
+    minItems: 1
+    maxItems: 6
+
+  cirrus,tip-debounce-ms:
+    description:
+      Software debounce on tip sense triggering in milliseconds.
+    default: 0
+
+  cirrus,tip-invert:
+    type: boolean
+    description:
+      Indicates tip detect polarity, inverted implies open-circuit whilst the
+      jack is inserted.
+
+  cirrus,tip-disable-pullup:
+    type: boolean
+    description:
+      Indicates if the internal pullup on the tip detect should be disabled.
+
+  cirrus,tip-fall-db-ms:
+    description:
+      Time in milliseconds a falling edge on the tip detect should be hardware
+      debounced for. Note the falling edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,tip-rise-db-ms:
+    description:
+      Time in milliseconds a rising edge on the tip detect should be hardware
+      debounced for. Note the rising edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,use-ring-sense:
+    type: boolean
+    description:
+      Indicates if the ring sense should be used.
+
+  cirrus,ring-invert:
+    type: boolean
+    description:
+      Indicates ring detect polarity, inverted implies open-circuit whilst the
+      jack is inserted.
+
+  cirrus,ring-disable-pullup:
+    type: boolean
+    description:
+      Indicates if the internal pullup on the ring detect should be disabled.
+
+  cirrus,ring-fall-db-ms:
+    description:
+      Time in milliseconds a falling edge on the ring detect should be hardware
+      debounced for. Note the falling edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,ring-rise-db-ms:
+    description:
+      Time in milliseconds a rising edge on the ring detect should be hardware
+      debounced for. Note the rising edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+    additionalProperties: false
+
+    properties:
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        items:
+          - description: A phandle to the CODEC pinctrl node
+            minimum: 0
+          - const: 0
+          - const: 0
+          - const: 3
+
+    patternProperties:
+      "-state$":
+        oneOf:
+          - $ref: "#/$defs/cirrus-cs42l43-state"
+          - patternProperties:
+              "-pins$":
+                $ref: "#/$defs/cirrus-cs42l43-state"
+            additionalProperties: false
+
+  spi:
+    type: object
+    $ref: /schemas/spi/spi-controller.yaml#
+    unevaluatedProperties: false
+
+$defs:
+  cirrus-cs42l43-state:
+    type: object
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml#
+      - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+    oneOf:
+      - required: [ groups ]
+      - required: [ pins ]
+
+    additionalProperties: false
+
+    properties:
+      groups:
+        enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ]
+
+      pins:
+        enum: [ gpio1, gpio2, gpio3,
+                asp_dout, asp_fsync, asp_bclk,
+                pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data,
+                i2c_sda, i2c_scl,
+                spi_miso, spi_sck, spi_ssb ]
+
+      function:
+        enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ]
+
+      drive-strength:
+        description: Set drive strength in mA
+        enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ]
+
+      input-debounce:
+        description: Set input debounce in uS
+        enum: [ 0, 85 ]
+
+required:
+  - compatible
+  - reg
+  - vdd-p-supply
+  - vdd-a-supply
+  - vdd-io-supply
+  - vdd-cp-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs42l43: codec@1a {
+            compatible = "cirrus,cs42l43";
+            reg = <0x1a>;
+
+            vdd-p-supply = <&vdd5v0>;
+            vdd-a-supply = <&vdd1v8>;
+            vdd-io-supply = <&vdd1v8>;
+            vdd-cp-supply = <&vdd1v8>;
+            vdd-amp-supply = <&vdd5v0>;
+
+            reset-gpios = <&gpio 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio>;
+            interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+            #sound-dai-cells = <1>;
+
+            clocks = <&clks 0>;
+            clock-names = "mclk";
+
+            cs42l43_pins: pinctrl {
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&cs42l43_pins 0 0 3>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: default-state {
+                    shutter-pins {
+                        groups = "gpio3";
+                        function = "mic-shutter";
+                    };
+                };
+            };
+
+            spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cs-gpios = <&cs42l43_pins 1 0>;
+
+                sensor@0 {
+                    compatible = "bosch,bme680";
+                    reg = <0>;
+                    spi-max-frequency = <1400000>;
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml

+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6348/BCM6358 SPI controller
+
+maintainers:
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |
+  Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband
+  SoCs.
+
+  This controller has a limitation that can not keep the chip select line active
+  between the SPI transfers within the same SPI message. This can terminate the
+  transaction to some SPI devices prematurely. The issue can be worked around by
+  the controller's prepend mode.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm6368-spi
+              - brcm,bcm6362-spi
+              - brcm,bcm63268-spi
+          - const: brcm,bcm6358-spi
+      - enum:
+          - brcm,bcm6348-spi
+          - brcm,bcm6358-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI master reference clock
+
+  clock-names:
+    items:
+      - const: spi
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@10000800 {
+        compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
+        reg = <0x10000800 0x70c>;
+        interrupts = <1>;
+        clocks = <&clkctl 9>;
+        clock-names = "spi";
+        num-cs = <5>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };

Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml

@@ -86,7 +86,17 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: ref
+      - items:
+          - const: ref
+          - const: ahb
+          - const: apb
 
   cdns,fifo-depth:
     description:

Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/loongson,ls2k-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson SPI controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls2k1000-spi
+      - items:
+          - enum:
+              - loongson,ls2k0500-spi
+          - const: loongson,ls2k1000-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@1fff0220{
+        compatible = "loongson,ls2k1000-spi";
+        reg = <0x1fff0220 0x10>;
+        clocks = <&clk 17>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };

Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt

-NVIDIA Tegra114 SPI controller.
-
-Required properties:
-- compatible : For Tegra114, must contain "nvidia,tegra114-spi".
-  Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where
-  <chip> is tegra124, tegra132, or tegra210.
-- reg: Should contain SPI registers location and length.
-- interrupts: Should contain SPI interrupts.
-- clock-names : Must include the following entries:
-  - spi
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - spi
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-Optional properties:
-- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device
-  with this tap value. This property is used to tune the outgoing data from
-  Tegra SPI master with respect to outgoing Tegra SPI master clock.
-  Tap values vary based on the platform design trace lengths from Tegra SPI
-  to corresponding slave devices. Valid tap values are from 0 thru 63.
-- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device
-  with this tap value. This property is used to adjust the Tegra SPI master
-  clock with respect to the data from the SPI slave device.
-  Tap values vary based on the platform design trace lengths from Tegra SPI
-  to corresponding slave devices. Valid tap values are from 0 thru 63.
-
-Example:
-
-spi@7000d600 {
-	compatible = "nvidia,tegra114-spi";
-	reg = <0x7000d600 0x200>;
-	interrupts = <0 82 0x04>;
-	spi-max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&tegra_car 44>;
-	clock-names = "spi";
-	resets = <&tegra_car 44>;
-	reset-names = "spi";
-	dmas = <&apbdma 16>, <&apbdma 16>;
-	dma-names = "rx", "tx";
-	<spi-client>@<bus_num> {
-		...
-		...
-		nvidia,rx-clk-tap-delay = <0>;
-		nvidia,tx-clk-tap-delay = <16>;
-		...
-	};
-
-};

Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra114-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 SPI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra114-spi
+      - items:
+          - enum:
+              - nvidia,tegra210-spi
+              - nvidia,tegra124-spi
+          - const: nvidia,tegra114-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI module clock
+
+  clock-names:
+    items:
+      - const: spi
+
+  resets:
+    items:
+      - description: SPI module reset
+
+  reset-names:
+    items:
+      - const: spi
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: spi-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    spi@7000d600 {
+        compatible = "nvidia,tegra114-spi";
+        reg = <0x7000d600 0x200>;
+        interrupts = <0 82 0x04>;
+        clocks = <&tegra_car 44>;
+        clock-names = "spi";
+        resets = <&tegra_car 44>;
+        reset-names = "spi";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        spi-max-frequency = <25000000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            nvidia,rx-clk-tap-delay = <0>;
+            nvidia,tx-clk-tap-delay = <16>;
+        };
+    };

Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt

-NVIDIA Tegra20 SFLASH controller.
-
-Required properties:
-- compatible : should be "nvidia,tegra20-sflash".
-- reg: Should contain SFLASH registers location and length.
-- interrupts: Should contain SFLASH interrupts.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - spi
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-spi@7000c380 {
-	compatible = "nvidia,tegra20-sflash";
-	reg = <0x7000c380 0x80>;
-	interrupts = <0 39 0x04>;
-	spi-max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&tegra_car 43>;
-	resets = <&tegra_car 43>;
-	reset-names = "spi";
-	dmas = <&apbdma 11>, <&apbdma 11>;
-	dma-names = "rx", "tx";
-};

Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra20-sflash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SFLASH controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-sflash
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: spi
+
+  dmas:
+    items:
+      - description: DMA channel used for reception
+      - description: DMA channel used for transmission
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: spi-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7000c380 {
+        compatible = "nvidia,tegra20-sflash";
+        reg = <0x7000c380 0x80>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+        spi-max-frequency = <25000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA20_CLK_SPI>;
+        resets = <&tegra_car 43>;
+        reset-names = "spi";
+        dmas = <&apbdma 11>, <&apbdma 11>;
+        dma-names = "rx", "tx";
+    };

Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt

-NVIDIA Tegra20/Tegra30 SLINK controller.
-
-Required properties:
-- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
-- reg: Should contain SLINK registers location and length.
-- interrupts: Should contain SLINK interrupts.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - spi
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-spi@7000d600 {
-	compatible = "nvidia,tegra20-slink";
-	reg = <0x7000d600 0x200>;
-	interrupts = <0 82 0x04>;
-	spi-max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&tegra_car 44>;
-	resets = <&tegra_car 44>;
-	reset-names = "spi";
-	dmas = <&apbdma 16>, <&apbdma 16>;
-	dma-names = "rx", "tx";
-};

Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra20-slink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20/30 SLINK controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-slink
+      - nvidia,tegra30-slink
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: spi
+
+  dmas:
+    items:
+      - description: DMA channel used for reception
+      - description: DMA channel used for transmission
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  operating-points-v2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: spi-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7000d600 {
+        compatible = "nvidia,tegra20-slink";
+        reg = <0x7000d600 0x200>;
+        interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+        spi-max-frequency = <25000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+        resets = <&tegra_car 44>;
+        reset-names = "spi";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+    };

Documentation/devicetree/bindings/spi/spi-bcm63xx.txt

-Binding for Broadcom BCM6348/BCM6358 SPI controller
-
-Required properties:
-- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi".
-- reg: Base address and size of the controllers memory area.
-- interrupts: Interrupt for the SPI block.
-- clocks: phandle of the SPI clock.
-- clock-names: has to be "spi".
-- #address-cells: <1>, as required by generic SPI binding.
-- #size-cells: <0>, also as required by generic SPI binding.
-
-Optional properties:
-- num-cs: some controllers have less than 8 cs signals. Defaults to 8
-  if absent.
-
-Child nodes as per the generic SPI binding.
-
-Example:
-
-	spi@10000800 {
-		compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
-		reg = <0x10000800 0x70c>;
-
-		interrupts = <1>;
-
-		clocks = <&clkctl 9>;
-		clock-names = "spi";
-
-		num-cs = <5>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};

Documentation/devicetree/bindings/spi/spi-cadence.yaml

@@ -49,6 +49,12 @@ properties:
     enum: [ 0, 1 ]
     default: 0
 
+  power-domains:
+    maxItems: 1
+
+  label:
+    description: Descriptive name of the SPI controller.
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml

@@ -63,6 +63,9 @@ properties:
     maximum: 2
     default: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml

@@ -45,6 +45,9 @@ properties:
       - const: fspi_en
       - const: fspi
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/spi/spi-pl022.yaml

@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: spi-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
 select:

MAINTAINERS

@@ -4126,7 +4126,7 @@ BROADCOM BCM6348/BCM6358 SPI controller DRIVER
 M:	Jonas Gorski <jonas.gorski@gmail.com>
 L:	linux-spi@vger.kernel.org
 S:	Odd Fixes
-F:	Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
+F:	Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml
 F:	drivers/spi/spi-bcm63xx.c
 
 BROADCOM ETHERNET PHY DRIVERS
@@ -4887,7 +4887,11 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	patches@opensource.cirrus.com
 S:	Maintained
 F:	Documentation/devicetree/bindings/sound/cirrus,cs*
+F:	drivers/mfd/cs42l43*
+F:	drivers/pinctrl/cirrus/pinctrl-cs42l43*
+F:	drivers/spi/spi-cs42l43*
 F:	include/dt-bindings/sound/cs*
+F:	include/linux/mfd/cs42l43*
 F:	include/sound/cs*
 F:	sound/pci/hda/cs*
 F:	sound/pci/hda/hda_cs_dsp_ctl.*
@@ -12282,6 +12286,16 @@ F:	Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
 F:	drivers/clk/clk-loongson2.c
 F:	include/dt-bindings/clock/loongson,ls2k-clk.h
 
+LOONGSON SPI DRIVER
+M:	Yinbo Zhu <zhuyinbo@loongson.cn>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml
+F:	drivers/spi/spi-loongson-core.c
+F:	drivers/spi/spi-loongson-pci.c
+F:	drivers/spi/spi-loongson-plat.c
+F:	drivers/spi/spi-loongson.h
+
 LOONGSON-2 SOC SERIES GUTS DRIVER
 M:	Yinbo Zhu <zhuyinbo@loongson.cn>
 L:	loongarch@lists.linux.dev

drivers/mfd/Kconfig

@@ -237,6 +237,29 @@ config MFD_CROS_EC_DEV
 	  To compile this driver as a module, choose M here: the module will be
 	  called cros-ec-dev.
 
+config MFD_CS42L43
+	tristate
+	select MFD_CORE
+	select REGMAP
+
+config MFD_CS42L43_I2C
+	tristate "Cirrus Logic CS42L43 (I2C)"
+	depends on I2C
+	select REGMAP_I2C
+	select MFD_CS42L43
+	help
+	  Select this to support the Cirrus Logic CS42L43 PC CODEC with
+	  headphone and class D speaker drivers over I2C.
+
+config MFD_CS42L43_SDW
+	tristate "Cirrus Logic CS42L43 (SoundWire)"
+	depends on SOUNDWIRE
+	select REGMAP_SOUNDWIRE
+	select MFD_CS42L43
+	help
+	  Select this to support the Cirrus Logic CS42L43 PC CODEC with
+	  headphone and class D speaker drivers over SoundWire.
+
 config MFD_MADERA
 	tristate "Cirrus Logic Madera codecs"
 	select MFD_CORE

drivers/mfd/Makefile

@@ -13,6 +13,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
+obj-$(CONFIG_MFD_CS42L43)	+= cs42l43.o
+obj-$(CONFIG_MFD_CS42L43_I2C)	+= cs42l43-i2c.o
+obj-$(CONFIG_MFD_CS42L43_SDW)	+= cs42l43-sdw.o
 obj-$(CONFIG_MFD_ENE_KB3930)	+= ene-kb3930.o
 obj-$(CONFIG_MFD_EXYNOS_LPASS)	+= exynos-lpass.o
 obj-$(CONFIG_MFD_GATEWORKS_GSC)	+= gateworks-gsc.o

drivers/mfd/cs42l43-i2c.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS42L43 I2C driver
+ *
+ * Copyright (C) 2022-2023 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mfd/cs42l43-regs.h>
+#include <linux/module.h>
+
+#include "cs42l43.h"
+
+static const struct regmap_config cs42l43_i2c_regmap = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.reg_format_endian	= REGMAP_ENDIAN_BIG,
+	.val_format_endian	= REGMAP_ENDIAN_BIG,
+
+	.max_register		= CS42L43_MCU_RAM_MAX,
+	.readable_reg		= cs42l43_readable_register,
+	.volatile_reg		= cs42l43_volatile_register,
+	.precious_reg		= cs42l43_precious_register,
+
+	.cache_type		= REGCACHE_MAPLE,
+	.reg_defaults		= cs42l43_reg_default,
+	.num_reg_defaults	= ARRAY_SIZE(cs42l43_reg_default),
+};
+
+static int cs42l43_i2c_probe(struct i2c_client *i2c)
+{
+	struct cs42l43 *cs42l43;
+	int ret;
+
+	cs42l43 = devm_kzalloc(&i2c->dev, sizeof(*cs42l43), GFP_KERNEL);
+	if (!cs42l43)
+		return -ENOMEM;
+
+	cs42l43->dev = &i2c->dev;
+	cs42l43->irq = i2c->irq;
+	/* A device on an I2C is always attached by definition. */
+	cs42l43->attached = true;
+
+	cs42l43->regmap = devm_regmap_init_i2c(i2c, &cs42l43_i2c_regmap);
+	if (IS_ERR(cs42l43->regmap)) {
+		ret = PTR_ERR(cs42l43->regmap);
+		dev_err(cs42l43->dev, "Failed to allocate regmap: %d\n", ret);
+		return ret;
+	}
+
+	return cs42l43_dev_probe(cs42l43);
+}
+
+static void cs42l43_i2c_remove(struct i2c_client *i2c)
+{
+	struct cs42l43 *cs42l43 = dev_get_drvdata(&i2c->dev);
+
+	cs42l43_dev_remove(cs42l43);
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id cs42l43_of_match[] = {
+	{ .compatible = "cirrus,cs42l43", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cs42l43_of_match);
+#endif
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id cs42l43_acpi_match[] = {
+	{ "CSC4243", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, cs42l43_acpi_match);
+#endif
+
+static struct i2c_driver cs42l43_i2c_driver = {
+	.driver = {
+		.name			= "cs42l43",
+		.pm			= pm_ptr(&cs42l43_pm_ops),
+		.of_match_table		= of_match_ptr(cs42l43_of_match),
+		.acpi_match_table	= ACPI_PTR(cs42l43_acpi_match),
+	},
+
+	.probe		= cs42l43_i2c_probe,
+	.remove		= cs42l43_i2c_remove,
+};
+module_i2c_driver(cs42l43_i2c_driver);
+
+MODULE_IMPORT_NS(MFD_CS42L43);
+
+MODULE_DESCRIPTION("CS42L43 I2C Driver");
+MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
+MODULE_LICENSE("GPL");

drivers/mfd/cs42l43-sdw.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS42L43 SoundWire driver
+ *
+ * Copyright (C) 2022-2023 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/mfd/cs42l43-regs.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/soundwire/sdw_type.h>
+
+#include "cs42l43.h"
+
+enum cs42l43_sdw_ports {
+	CS42L43_DMIC_DEC_ASP_PORT = 1,
+	CS42L43_SPK_TX_PORT,
+	CS42L43_SPDIF_HP_PORT,
+	CS42L43_SPK_RX_PORT,
+	CS42L43_ASP_PORT,
+};
+
+static const struct regmap_config cs42l43_sdw_regmap = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.reg_format_endian	= REGMAP_ENDIAN_LITTLE,
+	.val_format_endian	= REGMAP_ENDIAN_LITTLE,
+
+	.max_register		= CS42L43_MCU_RAM_MAX,
+	.readable_reg		= cs42l43_readable_register,
+	.volatile_reg		= cs42l43_volatile_register,
+	.precious_reg		= cs42l43_precious_register,
+
+	.cache_type		= REGCACHE_MAPLE,
+	.reg_defaults		= cs42l43_reg_default,
+	.num_reg_defaults	= ARRAY_SIZE(cs42l43_reg_default),
+};
+
+static int cs42l43_read_prop(struct sdw_slave *sdw)
+{
+	struct sdw_slave_prop *prop = &sdw->prop;
+	struct device *dev = &sdw->dev;
+	struct sdw_dpn_prop *dpn;
+	unsigned long addr;
+	int nval;
+	int i;
+	u32 bit;
+
+	prop->use_domain_irq = true;
+	prop->paging_support = true;
+	prop->wake_capable = true;
+	prop->source_ports = BIT(CS42L43_DMIC_DEC_ASP_PORT) | BIT(CS42L43_SPK_TX_PORT);
+	prop->sink_ports = BIT(CS42L43_SPDIF_HP_PORT) |
+			   BIT(CS42L43_SPK_RX_PORT) | BIT(CS42L43_ASP_PORT);
+	prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
+	prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY |
+			      SDW_SCP_INT1_IMPL_DEF;
+
+	nval = hweight32(prop->source_ports);
+	prop->src_dpn_prop = devm_kcalloc(dev, nval, sizeof(*prop->src_dpn_prop),
+					  GFP_KERNEL);
+	if (!prop->src_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->src_dpn_prop;
+	addr = prop->source_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].max_ch = 2;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].max_word = 24;
+		i++;
+	}
+	/*
+	 * All ports are 2 channels max, except the first one,
+	 * CS42L43_DMIC_DEC_ASP_PORT.
+	 */
+	dpn[CS42L43_DMIC_DEC_ASP_PORT].max_ch = 4;
+
+	nval = hweight32(prop->sink_ports);
+	prop->sink_dpn_prop = devm_kcalloc(dev, nval, sizeof(*prop->sink_dpn_prop),
+					   GFP_KERNEL);
+	if (!prop->sink_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->sink_dpn_prop;
+	addr = prop->sink_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].max_ch = 2;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].max_word = 24;
+		i++;
+	}
+
+	return 0;
+}
+
+static int cs42l43_sdw_update_status(struct sdw_slave *sdw, enum sdw_slave_status status)
+{
+	struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev);
+
+	switch (status) {
+	case SDW_SLAVE_ATTACHED:
+		dev_dbg(cs42l43->dev, "Device attach\n");
+
+		sdw_write_no_pm(sdw, CS42L43_GEN_INT_MASK_1,
+				CS42L43_INT_STAT_GEN1_MASK);
+
+		cs42l43->attached = true;
+
+		complete(&cs42l43->device_attach);
+		break;
+	case SDW_SLAVE_UNATTACHED:
+		dev_dbg(cs42l43->dev, "Device detach\n");
+
+		cs42l43->attached = false;
+
+		reinit_completion(&cs42l43->device_attach);
+		complete(&cs42l43->device_detach);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int cs42l43_sdw_interrupt(struct sdw_slave *sdw,
+				 struct sdw_slave_intr_status *status)
+{
+	/*
+	 * The IRQ itself was handled through the regmap_irq handler, this is
+	 * just clearing up the additional Cirrus SoundWire registers that are
+	 * not covered by the SoundWire framework or the IRQ handler itself.
+	 * There is only a single bit in GEN_INT_STAT_1 and it doesn't clear if
+	 * IRQs are still pending so doing a read/write here after handling the
+	 * IRQ is fine.
+	 */
+	sdw_read_no_pm(sdw, CS42L43_GEN_INT_STAT_1);
+	sdw_write_no_pm(sdw, CS42L43_GEN_INT_STAT_1, CS42L43_INT_STAT_GEN1_MASK);
+
+	return 0;
+}
+
+static int cs42l43_sdw_bus_config(struct sdw_slave *sdw,
+				  struct sdw_bus_params *params)
+{
+	struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev);
+	int ret = 0;
+
+	mutex_lock(&cs42l43->pll_lock);
+
+	if (cs42l43->sdw_freq != params->curr_dr_freq / 2) {
+		if (cs42l43->sdw_pll_active) {
+			dev_err(cs42l43->dev,
+				"PLL active can't change SoundWire bus clock\n");
+			ret = -EBUSY;
+		} else {
+			cs42l43->sdw_freq = params->curr_dr_freq / 2;
+		}
+	}
+
+	mutex_unlock(&cs42l43->pll_lock);
+
+	return ret;
+}
+
+static const struct sdw_slave_ops cs42l43_sdw_ops = {
+	.read_prop		= cs42l43_read_prop,
+	.update_status		= cs42l43_sdw_update_status,
+	.interrupt_callback	= cs42l43_sdw_interrupt,
+	.bus_config		= cs42l43_sdw_bus_config,
+};
+
+static int cs42l43_sdw_probe(struct sdw_slave *sdw, const struct sdw_device_id *id)
+{
+	struct cs42l43 *cs42l43;
+	struct device *dev = &sdw->dev;
+	int ret;
+
+	cs42l43 = devm_kzalloc(dev, sizeof(*cs42l43), GFP_KERNEL);
+	if (!cs42l43)
+		return -ENOMEM;
+
+	cs42l43->dev = dev;
+	cs42l43->sdw = sdw;
+
+	cs42l43->regmap = devm_regmap_init_sdw(sdw, &cs42l43_sdw_regmap);
+	if (IS_ERR(cs42l43->regmap)) {
+		ret = PTR_ERR(cs42l43->regmap);
+		dev_err(cs42l43->dev, "Failed to allocate regmap: %d\n", ret);
+		return ret;
+	}
+
+	return cs42l43_dev_probe(cs42l43);
+}
+
+static int cs42l43_sdw_remove(struct sdw_slave *sdw)
+{
+	struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev);
+
+	cs42l43_dev_remove(cs42l43);
+
+	return 0;
+}
+
+static const struct sdw_device_id cs42l43_sdw_id[] = {
+	SDW_SLAVE_ENTRY(0x01FA, 0x4243, 0),
+	{}
+};
+MODULE_DEVICE_TABLE(sdw, cs42l43_sdw_id);
+
+static struct sdw_driver cs42l43_sdw_driver = {
+	.driver = {
+		.name		= "cs42l43",
+		.pm		= pm_ptr(&cs42l43_pm_ops),
+	},
+
+	.probe		= cs42l43_sdw_probe,
+	.remove		= cs42l43_sdw_remove,
+	.id_table	= cs42l43_sdw_id,
+	.ops		= &cs42l43_sdw_ops,
+};
+module_sdw_driver(cs42l43_sdw_driver);
+
+MODULE_IMPORT_NS(MFD_CS42L43);
+
+MODULE_DESCRIPTION("CS42L43 SoundWire Driver");
+MODULE_AUTHOR("Lucas Tanure <tanureal@opensource.cirrus.com>");
+MODULE_LICENSE("GPL");

drivers/mfd/cs42l43.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CS42L43 core driver internal data
+ *
+ * Copyright (C) 2022-2023 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ */
+
+#include <linux/mfd/cs42l43.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+#ifndef CS42L43_CORE_INT_H
+#define CS42L43_CORE_INT_H
+
+#define CS42L43_N_DEFAULTS 176
+
+extern const struct dev_pm_ops cs42l43_pm_ops;
+extern const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS];
+
+bool cs42l43_readable_register(struct device *dev, unsigned int reg);
+bool cs42l43_precious_register(struct device *dev, unsigned int reg);
+bool cs42l43_volatile_register(struct device *dev, unsigned int reg);
+
+int cs42l43_dev_probe(struct cs42l43 *cs42l43);
+void cs42l43_dev_remove(struct cs42l43 *cs42l43);
+
+#endif /* CS42L43_CORE_INT_H */

drivers/pinctrl/cirrus/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
+config PINCTRL_CS42L43
+	tristate "Cirrus Logic CS42L43 Pinctrl Driver"
+	depends on MFD_CS42L43
+	select GPIOLIB
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	help
+	  Select this to support the GPIO/Pinctrl functions of the Cirrus
+	  Logic CS42L43 PC CODEC.
+
 config PINCTRL_LOCHNAGAR
 	tristate "Cirrus Logic Lochnagar pinctrl driver"
 	depends on MFD_LOCHNAGAR

drivers/pinctrl/cirrus/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 # Cirrus Logic pinctrl drivers
+obj-$(CONFIG_PINCTRL_CS42L43)	+= pinctrl-cs42l43.o
+
 obj-$(CONFIG_PINCTRL_LOCHNAGAR)	+= pinctrl-lochnagar.o
 
 pinctrl-madera-objs		:= pinctrl-madera-core.o

drivers/soundwire/bus.c

@@ -3,6 +3,7 @@
 
 #include <linux/acpi.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 #include <linux/mod_devicetable.h>
 #include <linux/pm_runtime.h>
 #include <linux/soundwire/sdw_registers.h>
@@ -25,6 +26,23 @@ static int sdw_get_id(struct sdw_bus *bus)
 	return 0;
 }
 
+static int sdw_irq_map(struct irq_domain *h, unsigned int virq,
+		       irq_hw_number_t hw)
+{
+	struct sdw_bus *bus = h->host_data;
+
+	irq_set_chip_data(virq, bus);
+	irq_set_chip(virq, &bus->irq_chip);
+	irq_set_nested_thread(virq, 1);
+	irq_set_noprobe(virq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops sdw_domain_ops = {
+	.map	= sdw_irq_map,
+};
+
 /**
  * sdw_bus_master_add() - add a bus Master instance
  * @bus: bus instance
@@ -151,6 +169,14 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	bus->params.curr_bank = SDW_BANK0;
 	bus->params.next_bank = SDW_BANK1;
 
+	bus->irq_chip.name = dev_name(bus->dev);
+	bus->domain = irq_domain_create_linear(fwnode, SDW_MAX_DEVICES,
+					       &sdw_domain_ops, bus);
+	if (!bus->domain) {
+		dev_err(bus->dev, "Failed to add IRQ domain\n");
+		return -EINVAL;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(sdw_bus_master_add);
@@ -187,6 +213,9 @@ static int sdw_delete_slave(struct device *dev, void *data)
 void sdw_bus_master_delete(struct sdw_bus *bus)
 {
 	device_for_each_child(bus->dev, NULL, sdw_delete_slave);
+
+	irq_domain_remove(bus->domain);
+
 	sdw_master_device_del(bus);
 
 	sdw_bus_debugfs_exit(bus);
@@ -1725,6 +1754,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 				struct device *dev = &slave->dev;
 				struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
 
+				if (slave->prop.use_domain_irq && slave->irq)
+					handle_nested_irq(slave->irq);
+
 				if (drv->ops && drv->ops->interrupt_callback) {
 					slave_intr.sdca_cascade = sdca_cascade;
 					slave_intr.control_port = clear;

drivers/soundwire/bus_type.c

@@ -122,6 +122,12 @@ static int sdw_drv_probe(struct device *dev)
 	if (drv->ops && drv->ops->read_prop)
 		drv->ops->read_prop(slave);
 
+	if (slave->prop.use_domain_irq) {
+		slave->irq = irq_create_mapping(slave->bus->domain, slave->dev_num);
+		if (!slave->irq)
+			dev_warn(dev, "Failed to map IRQ\n");
+	}
+
 	/* init the sysfs as we have properties now */
 	ret = sdw_slave_sysfs_init(slave);
 	if (ret < 0)
@@ -166,7 +172,13 @@ static int sdw_drv_remove(struct device *dev)
 	int ret = 0;
 
 	mutex_lock(&slave->sdw_dev_lock);
+
 	slave->probed = false;
+
+	if (slave->prop.use_domain_irq)
+		irq_dispose_mapping(irq_find_mapping(slave->bus->domain,
+						     slave->dev_num));
+
 	mutex_unlock(&slave->sdw_dev_lock);
 
 	if (drv->remove)

drivers/spi/Kconfig

@@ -281,6 +281,13 @@ config SPI_COLDFIRE_QSPI
 	  This enables support for the Coldfire QSPI controller in master
 	  mode.
 
+config SPI_CS42L43
+	tristate "Cirrus Logic CS42L43 SPI controller"
+	depends on MFD_CS42L43 && PINCTRL_CS42L43
+	help
+	  This enables support for the SPI controller inside the Cirrus Logic
+	  CS42L43 audio codec.
+
 config SPI_DAVINCI
 	tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
 	depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
@@ -516,6 +523,32 @@ config SPI_LM70_LLP
 	  which interfaces to an LM70 temperature sensor using
 	  a parallel port.
 
+config SPI_LOONGSON_CORE
+	tristate
+	depends on LOONGARCH || COMPILE_TEST
+
+config SPI_LOONGSON_PCI
+	tristate "Loongson SPI Controller PCI Driver Support"
+	select SPI_LOONGSON_CORE
+	depends on PCI && (LOONGARCH || COMPILE_TEST)
+	help
+	  This bus driver supports the Loongson SPI hardware controller in
+	  the Loongson platforms and supports to use PCI framework to
+	  register SPI device resources.
+	  Say Y or M here if you want to use the SPI controller on
+	  Loongson platform.
+
+config SPI_LOONGSON_PLATFORM
+	tristate "Loongson SPI Controller Platform Driver Support"
+	select SPI_LOONGSON_CORE
+	depends on OF && (LOONGARCH || COMPILE_TEST)
+	help
+	  This bus driver supports the Loongson SPI hardware controller in
+	  the Loongson platforms and supports to use DTS framework to
+	  register SPI device resources.
+	  Say Y or M here if you want to use the SPI controller on
+	  Loongson platform.
+
 config SPI_LP8841_RTC
 	tristate "ICP DAS LP-8841 SPI Controller for RTC"
 	depends on MACH_PXA27X_DT || COMPILE_TEST

drivers/spi/Makefile

@@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= spi-cadence-quadspi.o
 obj-$(CONFIG_SPI_CADENCE_XSPI)		+= spi-cadence-xspi.o
 obj-$(CONFIG_SPI_CLPS711X)		+= spi-clps711x.o
 obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
+obj-$(CONFIG_SPI_CS42L43)		+= spi-cs42l43.o
 obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
 obj-$(CONFIG_SPI_DLN2)			+= spi-dln2.o
 obj-$(CONFIG_SPI_DESIGNWARE)		+= spi-dw.o
@@ -71,6 +72,9 @@ obj-$(CONFIG_SPI_INTEL_PLATFORM)	+= spi-intel-platform.o
 obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
 obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
+obj-$(CONFIG_SPI_LOONGSON_CORE)		+= spi-loongson-core.o
+obj-$(CONFIG_SPI_LOONGSON_PCI)		+= spi-loongson-pci.o
+obj-$(CONFIG_SPI_LOONGSON_PLATFORM)	+= spi-loongson-plat.o
 obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
 obj-$(CONFIG_SPI_MESON_SPICC)		+= spi-meson-spicc.o
 obj-$(CONFIG_SPI_MESON_SPIFC)		+= spi-meson-spifc.o

drivers/spi/spi-amd.c

@@ -215,9 +215,9 @@ static int amd_spi_execute_opcode(struct amd_spi *amd_spi)
 	}
 }
 
-static int amd_spi_master_setup(struct spi_device *spi)
+static int amd_spi_host_setup(struct spi_device *spi)
 {
-	struct amd_spi *amd_spi = spi_master_get_devdata(spi->master);
+	struct amd_spi *amd_spi = spi_controller_get_devdata(spi->controller);
 
 	amd_spi_clear_fifo_ptr(amd_spi);
 
@@ -272,7 +272,7 @@ static int amd_set_spi_freq(struct amd_spi *amd_spi, u32 speed_hz)
 }
 
 static inline int amd_spi_fifo_xfer(struct amd_spi *amd_spi,
-				    struct spi_master *master,
+				    struct spi_controller *host,
 				    struct spi_message *message)
 {
 	struct spi_transfer *xfer = NULL;
@@ -353,15 +353,15 @@ static inline int amd_spi_fifo_xfer(struct amd_spi *amd_spi,
 		return -ENODEV;
 	}
 
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(host);
 
 	return message->status;
 }
 
-static int amd_spi_master_transfer(struct spi_master *master,
+static int amd_spi_host_transfer(struct spi_controller *host,
 				   struct spi_message *msg)
 {
-	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+	struct amd_spi *amd_spi = spi_controller_get_devdata(host);
 	struct spi_device *spi = msg->spi;
 
 	amd_spi_select_chip(amd_spi, spi_get_chipselect(spi, 0));
@@ -370,7 +370,7 @@ static int amd_spi_master_transfer(struct spi_master *master,
 	 * Extract spi_transfers from the spi message and
 	 * program the controller.
 	 */
-	return amd_spi_fifo_xfer(amd_spi, master, msg);
+	return amd_spi_fifo_xfer(amd_spi, host, msg);
 }
 
 static size_t amd_spi_max_transfer_size(struct spi_device *spi)
@@ -381,16 +381,16 @@ static size_t amd_spi_max_transfer_size(struct spi_device *spi)
 static int amd_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct amd_spi *amd_spi;
 	int err;
 
-	/* Allocate storage for spi_master and driver private data */
-	master = devm_spi_alloc_master(dev, sizeof(struct amd_spi));
-	if (!master)
-		return dev_err_probe(dev, -ENOMEM, "Error allocating SPI master\n");
+	/* Allocate storage for host and driver private data */
+	host = devm_spi_alloc_host(dev, sizeof(struct amd_spi));
+	if (!host)
+		return dev_err_probe(dev, -ENOMEM, "Error allocating SPI host\n");
 
-	amd_spi = spi_master_get_devdata(master);
+	amd_spi = spi_controller_get_devdata(host);
 	amd_spi->io_remap_addr = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(amd_spi->io_remap_addr))
 		return dev_err_probe(dev, PTR_ERR(amd_spi->io_remap_addr),
@@ -398,22 +398,22 @@ static int amd_spi_probe(struct platform_device *pdev)
 
 	dev_dbg(dev, "io_remap_address: %p\n", amd_spi->io_remap_addr);
 
-	amd_spi->version = (enum amd_spi_versions) device_get_match_data(dev);
+	amd_spi->version = (uintptr_t) device_get_match_data(dev);
 
-	/* Initialize the spi_master fields */
-	master->bus_num = 0;
-	master->num_chipselect = 4;
-	master->mode_bits = 0;
-	master->flags = SPI_MASTER_HALF_DUPLEX;
-	master->max_speed_hz = AMD_SPI_MAX_HZ;
-	master->min_speed_hz = AMD_SPI_MIN_HZ;
-	master->setup = amd_spi_master_setup;
-	master->transfer_one_message = amd_spi_master_transfer;
-	master->max_transfer_size = amd_spi_max_transfer_size;
-	master->max_message_size = amd_spi_max_transfer_size;
+	/* Initialize the spi_controller fields */
+	host->bus_num = 0;
+	host->num_chipselect = 4;
+	host->mode_bits = 0;
+	host->flags = SPI_CONTROLLER_HALF_DUPLEX;
+	host->max_speed_hz = AMD_SPI_MAX_HZ;
+	host->min_speed_hz = AMD_SPI_MIN_HZ;
+	host->setup = amd_spi_host_setup;
+	host->transfer_one_message = amd_spi_host_transfer;
+	host->max_transfer_size = amd_spi_max_transfer_size;
+	host->max_message_size = amd_spi_max_transfer_size;
 
 	/* Register the controller with SPI framework */
-	err = devm_spi_register_master(dev, master);
+	err = devm_spi_register_controller(dev, host);
 	if (err)
 		return dev_err_probe(dev, err, "error registering SPI controller\n");
 

drivers/spi/spi-amlogic-spifc-a1.c

@@ -72,7 +72,7 @@
 
 #define SPIFC_A1_USER_DBUF_ADDR_REG	0x248
 
-#define SPIFC_A1_BUFFER_SIZE		512
+#define SPIFC_A1_BUFFER_SIZE		512U
 
 #define SPIFC_A1_MAX_HZ			200000000
 #define SPIFC_A1_MIN_HZ			1000000
@@ -107,6 +107,7 @@ struct amlogic_spifc_a1 {
 	struct clk *clk;
 	struct device *dev;
 	void __iomem *base;
+	u32 curr_speed_hz;
 };
 
 static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read)
@@ -235,66 +236,68 @@ static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc,
 	return amlogic_spifc_a1_request(spifc, false);
 }
 
-static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
-				    const struct spi_mem_op *op)
+static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq)
 {
-	struct amlogic_spifc_a1 *spifc =
-		spi_controller_get_devdata(mem->spi->controller);
-	size_t off, nbytes = op->data.nbytes;
-	u32 cmd_cfg, addr_cfg, dummy_cfg, dmode;
 	int ret;
 
-	amlogic_spifc_a1_user_init(spifc);
-
-	cmd_cfg = SPIFC_A1_USER_CMD(op);
-	amlogic_spifc_a1_set_cmd(spifc, cmd_cfg);
-
-	if (op->addr.nbytes) {
-		addr_cfg = SPIFC_A1_USER_ADDR(op);
-		amlogic_spifc_a1_set_addr(spifc, op->addr.val, addr_cfg);
-	}
+	if (freq == spifc->curr_speed_hz)
+		return 0;
 
-	if (op->dummy.nbytes) {
-		dummy_cfg = SPIFC_A1_USER_DUMMY(op);
-		amlogic_spifc_a1_set_dummy(spifc, dummy_cfg);
-	}
+	ret = clk_set_rate(spifc->clk, freq);
+	if (ret)
+		return ret;
 
-	if (!op->data.nbytes)
-		return amlogic_spifc_a1_request(spifc, false);
+	spifc->curr_speed_hz = freq;
+	return 0;
+}
 
-	dmode = ilog2(op->data.buswidth);
-	off = 0;
+static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
+				    const struct spi_mem_op *op)
+{
+	struct amlogic_spifc_a1 *spifc =
+		spi_controller_get_devdata(mem->spi->controller);
+	size_t data_size = op->data.nbytes;
+	int ret;
 
-	do {
-		size_t block_size = min_t(size_t, nbytes, SPIFC_A1_BUFFER_SIZE);
+	ret = amlogic_spifc_a1_set_freq(spifc, mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
 
-		amlogic_spifc_a1_set_cmd(spifc, cmd_cfg);
+	amlogic_spifc_a1_user_init(spifc);
+	amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));
 
 	if (op->addr.nbytes)
-			amlogic_spifc_a1_set_addr(spifc, op->addr.val + off,
-						  addr_cfg);
+		amlogic_spifc_a1_set_addr(spifc, op->addr.val,
+					  SPIFC_A1_USER_ADDR(op));
 
 	if (op->dummy.nbytes)
-			amlogic_spifc_a1_set_dummy(spifc, dummy_cfg);
+		amlogic_spifc_a1_set_dummy(spifc, SPIFC_A1_USER_DUMMY(op));
+
+	if (data_size) {
+		u32 mode = ilog2(op->data.buswidth);
 
 		writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
 
 		if (op->data.dir == SPI_MEM_DATA_IN)
-			ret = amlogic_spifc_a1_read(spifc,
-						    op->data.buf.in + off,
-						    block_size, dmode);
+			ret = amlogic_spifc_a1_read(spifc, op->data.buf.in,
+						    data_size, mode);
 		else
-			ret = amlogic_spifc_a1_write(spifc,
-						     op->data.buf.out + off,
-						     block_size, dmode);
-
-		nbytes -= block_size;
-		off += block_size;
-	} while (nbytes != 0 && !ret);
+			ret = amlogic_spifc_a1_write(spifc, op->data.buf.out,
+						     data_size, mode);
+	} else {
+		ret = amlogic_spifc_a1_request(spifc, false);
+	}
 
 	return ret;
 }
 
+static int amlogic_spifc_a1_adjust_op_size(struct spi_mem *mem,
+					   struct spi_mem_op *op)
+{
+	op->data.nbytes = min(op->data.nbytes, SPIFC_A1_BUFFER_SIZE);
+	return 0;
+}
+
 static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
 {
 	u32 regv;
@@ -314,6 +317,7 @@ static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
 
 static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = {
 	.exec_op = amlogic_spifc_a1_exec_op,
+	.adjust_op_size = amlogic_spifc_a1_adjust_op_size,
 };
 
 static int amlogic_spifc_a1_probe(struct platform_device *pdev)
@@ -322,7 +326,7 @@ static int amlogic_spifc_a1_probe(struct platform_device *pdev)
 	struct amlogic_spifc_a1 *spifc;
 	int ret;
 
-	ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*spifc));
+	ctrl = devm_spi_alloc_host(&pdev->dev, sizeof(*spifc));
 	if (!ctrl)
 		return -ENOMEM;
 

drivers/spi/spi-ar934x.c

@@ -14,7 +14,8 @@
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
 #define DRIVER_NAME "spi-ar934x"

drivers/spi/spi-armada-3700.c

@@ -17,8 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/spi/spi.h>
 

drivers/spi/spi-aspeed-smc.c

@@ -295,7 +295,7 @@ static const struct aspeed_spi_data ast2400_spi_data;
 
 static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
-	struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master);
+	struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->controller);
 	struct aspeed_spi_chip *chip = &aspi->chips[spi_get_chipselect(mem->spi, 0)];
 	u32 addr_mode, addr_mode_backup;
 	u32 ctl_val;
@@ -374,7 +374,7 @@ static int aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 static const char *aspeed_spi_get_name(struct spi_mem *mem)
 {
-	struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master);
+	struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->controller);
 	struct device *dev = aspi->dev;
 
 	return devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
@@ -553,7 +553,7 @@ static int aspeed_spi_do_calibration(struct aspeed_spi_chip *chip);
 
 static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
 {
-	struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master);
+	struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->controller);
 	struct aspeed_spi_chip *chip = &aspi->chips[spi_get_chipselect(desc->mem->spi, 0)];
 	struct spi_mem_op *op = &desc->info.op_tmpl;
 	u32 ctl_val;
@@ -620,7 +620,7 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
 static ssize_t aspeed_spi_dirmap_read(struct spi_mem_dirmap_desc *desc,
 				      u64 offset, size_t len, void *buf)
 {
-	struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master);
+	struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->controller);
 	struct aspeed_spi_chip *chip = &aspi->chips[spi_get_chipselect(desc->mem->spi, 0)];
 
 	/* Switch to USER command mode if mapping window is too small */
@@ -669,7 +669,7 @@ static void aspeed_spi_chip_enable(struct aspeed_spi *aspi, unsigned int cs, boo
 
 static int aspeed_spi_setup(struct spi_device *spi)
 {
-	struct aspeed_spi *aspi = spi_controller_get_devdata(spi->master);
+	struct aspeed_spi *aspi = spi_controller_get_devdata(spi->controller);
 	const struct aspeed_spi_data *data = aspi->data;
 	unsigned int cs = spi_get_chipselect(spi, 0);
 	struct aspeed_spi_chip *chip = &aspi->chips[cs];
@@ -697,7 +697,7 @@ static int aspeed_spi_setup(struct spi_device *spi)
 
 static void aspeed_spi_cleanup(struct spi_device *spi)
 {
-	struct aspeed_spi *aspi = spi_controller_get_devdata(spi->master);
+	struct aspeed_spi *aspi = spi_controller_get_devdata(spi->controller);
 	unsigned int cs = spi_get_chipselect(spi, 0);
 
 	aspeed_spi_chip_enable(aspi, cs, false);
@@ -726,7 +726,7 @@ static int aspeed_spi_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENODEV;
 
-	ctlr = devm_spi_alloc_master(dev, sizeof(*aspi));
+	ctlr = devm_spi_alloc_host(dev, sizeof(*aspi));
 	if (!ctlr)
 		return -ENOMEM;
 

drivers/spi/spi-at91-usart.c

@@ -13,7 +13,6 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_platform.h>
 #include <linux/gpio/consumer.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
@@ -486,10 +485,7 @@ static int at91_usart_gpio_setup(struct platform_device *pdev)
 
 	cs_gpios = devm_gpiod_get_array_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
 
-	if (IS_ERR(cs_gpios))
-		return PTR_ERR(cs_gpios);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(cs_gpios);
 }
 
 static int at91_usart_spi_probe(struct platform_device *pdev)
@@ -527,7 +523,7 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
 	controller->dev.of_node = pdev->dev.parent->of_node;
 	controller->bits_per_word_mask = SPI_BPW_MASK(8);
 	controller->setup = at91_usart_spi_setup;
-	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+	controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
 	controller->transfer_one = at91_usart_spi_transfer_one;
 	controller->prepare_message = at91_usart_spi_prepare_message;
 	controller->unprepare_message = at91_usart_spi_unprepare_message;

drivers/spi/spi-ath79.c

@@ -185,7 +185,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 
 	host->use_gpio_descriptors = true;
 	host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	host->flags = SPI_MASTER_GPIO_SS;
+	host->flags = SPI_CONTROLLER_GPIO_SS;
 	host->num_chipselect = 3;
 	host->mem_ops = &ath79_mem_ops;
 

drivers/spi/spi-atmel.c

@@ -1450,10 +1450,6 @@ static int atmel_spi_probe(struct platform_device *pdev)
 	/* Select default pin state */
 	pinctrl_pm_select_default_state(&pdev->dev);
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs)
-		return -ENXIO;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -1475,8 +1471,8 @@ static int atmel_spi_probe(struct platform_device *pdev)
 	host->bus_num = pdev->id;
 	host->num_chipselect = 4;
 	host->setup = atmel_spi_setup;
-	host->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX |
-			SPI_MASTER_GPIO_SS);
+	host->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX |
+			SPI_CONTROLLER_GPIO_SS);
 	host->transfer_one = atmel_spi_one_transfer;
 	host->set_cs = atmel_spi_set_cs;
 	host->cleanup = atmel_spi_cleanup;
@@ -1490,7 +1486,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
 	spin_lock_init(&as->lock);
 
 	as->pdev = pdev;
-	as->regs = devm_ioremap_resource(&pdev->dev, regs);
+	as->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &regs);
 	if (IS_ERR(as->regs)) {
 		ret = PTR_ERR(as->regs);
 		goto out_unmap_regs;

drivers/spi/spi-au1550.c

@@ -54,7 +54,7 @@ struct au1550_spi {
 	int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
 	irqreturn_t (*irq_callback)(struct au1550_spi *hw);
 
-	struct completion master_done;
+	struct completion host_done;
 
 	unsigned int usedma;
 	u32 dma_tx_id;
@@ -66,7 +66,7 @@ struct au1550_spi {
 	unsigned int dma_rx_tmpbuf_size;
 	u32 dma_rx_tmpbuf_addr;
 
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct device *dev;
 	struct au1550_spi_info *pdata;
 	struct resource *ioarea;
@@ -159,7 +159,7 @@ static void au1550_spi_reset_fifos(struct au1550_spi *hw)
  */
 static void au1550_spi_chipsel(struct spi_device *spi, int value)
 {
-	struct au1550_spi *hw = spi_master_get_devdata(spi->master);
+	struct au1550_spi *hw = spi_controller_get_devdata(spi->controller);
 	unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
 	u32 cfg, stat;
 
@@ -219,7 +219,7 @@ static void au1550_spi_chipsel(struct spi_device *spi, int value)
 
 static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct au1550_spi *hw = spi_master_get_devdata(spi->master);
+	struct au1550_spi *hw = spi_controller_get_devdata(spi->controller);
 	unsigned int bpw, hz;
 	u32 cfg, stat;
 
@@ -272,7 +272,7 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
  * no reliable way how to recognize that spi transfer is done
  * dma complete callbacks are called before real spi transfer is finished
  * and if only tx dma channel is set up (and rx fifo overflow event masked)
- * spi master done event irq is not generated unless rx fifo is empty (emptied)
+ * spi host done event irq is not generated unless rx fifo is empty (emptied)
  * so we need rx tmp buffer to use for rx dma if user does not provide one
  */
 static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned int size)
@@ -303,7 +303,7 @@ static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw)
 
 static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct au1550_spi *hw = spi_master_get_devdata(spi->master);
+	struct au1550_spi *hw = spi_controller_get_devdata(spi->controller);
 	dma_addr_t dma_tx_addr;
 	dma_addr_t dma_rx_addr;
 	u32 res;
@@ -387,7 +387,7 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 	hw->regs->psc_spipcr = PSC_SPIPCR_MS;
 	wmb(); /* drain writebuffer */
 
-	wait_for_completion(&hw->master_done);
+	wait_for_completion(&hw->host_done);
 
 	au1xxx_dbdma_stop(hw->dma_tx_ch);
 	au1xxx_dbdma_stop(hw->dma_rx_ch);
@@ -449,7 +449,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
 				"dma transfer: unexpected SPI error (event=0x%x stat=0x%x)!\n",
 				evnt, stat);
 
-		complete(&hw->master_done);
+		complete(&hw->host_done);
 		return IRQ_HANDLED;
 	}
 
@@ -458,7 +458,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
 		au1550_spi_mask_ack_all(hw);
 		hw->rx_count = hw->len;
 		hw->tx_count = hw->len;
-		complete(&hw->master_done);
+		complete(&hw->host_done);
 	}
 	return IRQ_HANDLED;
 }
@@ -502,7 +502,7 @@ AU1550_SPI_TX_WORD(32, 0xffffff)
 static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t)
 {
 	u32 stat, mask;
-	struct au1550_spi *hw = spi_master_get_devdata(spi->master);
+	struct au1550_spi *hw = spi_controller_get_devdata(spi->controller);
 
 	hw->tx = t->tx_buf;
 	hw->rx = t->rx_buf;
@@ -537,7 +537,7 @@ static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t)
 	hw->regs->psc_spipcr = PSC_SPIPCR_MS;
 	wmb(); /* drain writebuffer */
 
-	wait_for_completion(&hw->master_done);
+	wait_for_completion(&hw->host_done);
 
 	return min(hw->rx_count, hw->tx_count);
 }
@@ -568,7 +568,7 @@ static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
 		dev_err(hw->dev,
 			"pio transfer: unexpected SPI error (event=0x%x stat=0x%x)!\n",
 			evnt, stat);
-		complete(&hw->master_done);
+		complete(&hw->host_done);
 		return IRQ_HANDLED;
 	}
 
@@ -605,11 +605,11 @@ static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
 	/*
 	 * Restart the SPI transmission in case of a transmit underflow.
 	 * This seems to work despite the notes in the Au1550 data book
-	 * of Figure 8-4 with flowchart for SPI master operation:
+	 * of Figure 8-4 with flowchart for SPI host operation:
 	 *
 	 * """Note 1: An XFR Error Interrupt occurs, unless masked,
 	 * for any of the following events: Tx FIFO Underflow,
-	 * Rx FIFO Overflow, or Multiple-master Error
+	 * Rx FIFO Overflow, or Multiple-host Error
 	 *    Note 2: In case of a Tx Underflow Error, all zeroes are
 	 * transmitted."""
 	 *
@@ -627,14 +627,14 @@ static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
 	if (hw->rx_count >= hw->len) {
 		/* transfer completed successfully */
 		au1550_spi_mask_ack_all(hw);
-		complete(&hw->master_done);
+		complete(&hw->host_done);
 	}
 	return IRQ_HANDLED;
 }
 
 static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct au1550_spi *hw = spi_master_get_devdata(spi->master);
+	struct au1550_spi *hw = spi_controller_get_devdata(spi->controller);
 
 	return hw->txrx_bufs(spi, t);
 }
@@ -723,24 +723,24 @@ static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
 static int au1550_spi_probe(struct platform_device *pdev)
 {
 	struct au1550_spi *hw;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct resource *r;
 	int err = 0;
 
-	master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "No memory for spi_master\n");
+	host = spi_alloc_host(&pdev->dev, sizeof(struct au1550_spi));
+	if (host == NULL) {
+		dev_err(&pdev->dev, "No memory for spi_controller\n");
 		err = -ENOMEM;
 		goto err_nomem;
 	}
 
 	/* the spi->mode bits understood by this driver: */
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
-	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24);
+	host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+	host->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24);
 
-	hw = spi_master_get_devdata(master);
+	hw = spi_controller_get_devdata(host);
 
-	hw->master = master;
+	hw->host = host;
 	hw->pdata = dev_get_platdata(&pdev->dev);
 	hw->dev = &pdev->dev;
 
@@ -798,9 +798,9 @@ static int au1550_spi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, hw);
 
-	init_completion(&hw->master_done);
+	init_completion(&hw->host_done);
 
-	hw->bitbang.master = hw->master;
+	hw->bitbang.master = hw->host;
 	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
 	hw->bitbang.chipselect = au1550_spi_chipsel;
 	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
@@ -858,8 +858,8 @@ static int au1550_spi_probe(struct platform_device *pdev)
 		goto err_no_irq;
 	}
 
-	master->bus_num = pdev->id;
-	master->num_chipselect = hw->pdata->num_chipselect;
+	host->bus_num = pdev->id;
+	host->num_chipselect = hw->pdata->num_chipselect;
 
 	/*
 	 *  precompute valid range for spi freq - from au1550 datasheet:
@@ -874,8 +874,8 @@ static int au1550_spi_probe(struct platform_device *pdev)
 		int min_div = (2 << 0) * (2 * (4 + 1));
 		int max_div = (2 << 3) * (2 * (63 + 1));
 
-		master->max_speed_hz = hw->pdata->mainclk_hz / min_div;
-		master->min_speed_hz =
+		host->max_speed_hz = hw->pdata->mainclk_hz / min_div;
+		host->min_speed_hz =
 				hw->pdata->mainclk_hz / (max_div + 1) + 1;
 	}
 
@@ -883,13 +883,13 @@ static int au1550_spi_probe(struct platform_device *pdev)
 
 	err = spi_bitbang_start(&hw->bitbang);
 	if (err) {
-		dev_err(&pdev->dev, "Failed to register SPI master\n");
+		dev_err(&pdev->dev, "Failed to register SPI host\n");
 		goto err_register;
 	}
 
 	dev_info(&pdev->dev,
-		"spi master registered: bus_num=%d num_chipselect=%d\n",
-		master->bus_num, master->num_chipselect);
+		"spi host registered: bus_num=%d num_chipselect=%d\n",
+		host->bus_num, host->num_chipselect);
 
 	return 0;
 
@@ -917,7 +917,7 @@ static int au1550_spi_probe(struct platform_device *pdev)
 
 err_no_iores:
 err_no_pdata:
-	spi_master_put(hw->master);
+	spi_controller_put(hw->host);
 
 err_nomem:
 	return err;
@@ -927,8 +927,8 @@ static void au1550_spi_remove(struct platform_device *pdev)
 {
 	struct au1550_spi *hw = platform_get_drvdata(pdev);
 
-	dev_info(&pdev->dev, "spi master remove: bus_num=%d\n",
-		hw->master->bus_num);
+	dev_info(&pdev->dev, "spi host remove: bus_num=%d\n",
+		hw->host->bus_num);
 
 	spi_bitbang_stop(&hw->bitbang);
 	free_irq(hw->irq, hw);
@@ -941,7 +941,7 @@ static void au1550_spi_remove(struct platform_device *pdev)
 		au1xxx_dbdma_chan_free(hw->dma_tx_ch);
 	}
 
-	spi_master_put(hw->master);
+	spi_controller_put(hw->host);
 }
 
 /* work with hotplug and coldplug */

drivers/spi/spi-axi-spi-engine.c

@@ -356,8 +356,8 @@ static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine)
 
 static irqreturn_t spi_engine_irq(int irq, void *devid)
 {
-	struct spi_master *master = devid;
-	struct spi_engine *spi_engine = spi_master_get_devdata(master);
+	struct spi_controller *host = devid;
+	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
 	unsigned int disable_int = 0;
 	unsigned int pending;
 
@@ -396,7 +396,7 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 			msg->status = 0;
 			msg->actual_length = msg->frame_length;
 			spi_engine->msg = NULL;
-			spi_finalize_current_message(master);
+			spi_finalize_current_message(host);
 			disable_int |= SPI_ENGINE_INT_SYNC;
 		}
 	}
@@ -412,11 +412,11 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-static int spi_engine_transfer_one_message(struct spi_master *master,
+static int spi_engine_transfer_one_message(struct spi_controller *host,
 	struct spi_message *msg)
 {
 	struct spi_engine_program p_dry, *p;
-	struct spi_engine *spi_engine = spi_master_get_devdata(master);
+	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
 	unsigned int int_enable = 0;
 	unsigned long flags;
 	size_t size;
@@ -464,42 +464,42 @@ static int spi_engine_transfer_one_message(struct spi_master *master,
 static int spi_engine_probe(struct platform_device *pdev)
 {
 	struct spi_engine *spi_engine;
-	struct spi_master *master;
+	struct spi_controller *host;
 	unsigned int version;
 	int irq;
 	int ret;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
-		return -ENXIO;
+	if (irq < 0)
+		return irq;
 
 	spi_engine = devm_kzalloc(&pdev->dev, sizeof(*spi_engine), GFP_KERNEL);
 	if (!spi_engine)
 		return -ENOMEM;
 
-	master = spi_alloc_master(&pdev->dev, 0);
-	if (!master)
+	host = spi_alloc_host(&pdev->dev, 0);
+	if (!host)
 		return -ENOMEM;
 
-	spi_master_set_devdata(master, spi_engine);
+	spi_controller_set_devdata(host, spi_engine);
 
 	spin_lock_init(&spi_engine->lock);
 
 	spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(spi_engine->clk)) {
 		ret = PTR_ERR(spi_engine->clk);
-		goto err_put_master;
+		goto err_put_host;
 	}
 
 	spi_engine->ref_clk = devm_clk_get(&pdev->dev, "spi_clk");
 	if (IS_ERR(spi_engine->ref_clk)) {
 		ret = PTR_ERR(spi_engine->ref_clk);
-		goto err_put_master;
+		goto err_put_host;
 	}
 
 	ret = clk_prepare_enable(spi_engine->clk);
 	if (ret)
-		goto err_put_master;
+		goto err_put_host;
 
 	ret = clk_prepare_enable(spi_engine->ref_clk);
 	if (ret)
@@ -525,46 +525,46 @@ static int spi_engine_probe(struct platform_device *pdev)
 	writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
 
-	ret = request_irq(irq, spi_engine_irq, 0, pdev->name, master);
+	ret = request_irq(irq, spi_engine_irq, 0, pdev->name, host);
 	if (ret)
 		goto err_ref_clk_disable;
 
-	master->dev.of_node = pdev->dev.of_node;
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
-	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
-	master->transfer_one_message = spi_engine_transfer_one_message;
-	master->num_chipselect = 8;
+	host->dev.of_node = pdev->dev.of_node;
+	host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
+	host->bits_per_word_mask = SPI_BPW_MASK(8);
+	host->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
+	host->transfer_one_message = spi_engine_transfer_one_message;
+	host->num_chipselect = 8;
 
-	ret = spi_register_master(master);
+	ret = spi_register_controller(host);
 	if (ret)
 		goto err_free_irq;
 
-	platform_set_drvdata(pdev, master);
+	platform_set_drvdata(pdev, host);
 
 	return 0;
 err_free_irq:
-	free_irq(irq, master);
+	free_irq(irq, host);
 err_ref_clk_disable:
 	clk_disable_unprepare(spi_engine->ref_clk);
 err_clk_disable:
 	clk_disable_unprepare(spi_engine->clk);
-err_put_master:
-	spi_master_put(master);
+err_put_host:
+	spi_controller_put(host);
 	return ret;
 }
 
 static void spi_engine_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
-	struct spi_engine *spi_engine = spi_master_get_devdata(master);
+	struct spi_controller *host = spi_controller_get(platform_get_drvdata(pdev));
+	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
 	int irq = platform_get_irq(pdev, 0);
 
-	spi_unregister_master(master);
+	spi_unregister_controller(host);
 
-	free_irq(irq, master);
+	free_irq(irq, host);
 
-	spi_master_put(master);
+	spi_controller_put(host);
 
 	writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);

drivers/spi/spi-bcm-qspi.c

@@ -220,7 +220,7 @@ struct qspi_trans {
 
 struct bcm_qspi {
 	struct platform_device *pdev;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct clk *clk;
 	u32 base_clk;
 	u32 max_speed_hz;
@@ -732,7 +732,7 @@ static bool bcm_qspi_mspi_transfer_is_last(struct bcm_qspi *qspi,
 					   struct qspi_trans *qt)
 {
 	if (qt->mspi_last_trans &&
-	    spi_transfer_is_last(qspi->master, qt->trans))
+	    spi_transfer_is_last(qspi->host, qt->trans))
 		return true;
 	else
 		return false;
@@ -979,7 +979,7 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 		mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
 			       MSPI_CDRAM_BITSE_BIT);
 
-		/* set 3wrire halfduplex mode data from master to slave */
+		/* set 3wrire halfduplex mode data from host to target */
 		if ((spi->mode & SPI_3WIRE) && tp.trans->tx_buf)
 			mspi_cdram |= MSPI_CDRAM_OUTP;
 
@@ -1035,7 +1035,7 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 static int bcm_qspi_bspi_exec_mem_op(struct spi_device *spi,
 				     const struct spi_mem_op *op)
 {
-	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+	struct bcm_qspi *qspi = spi_controller_get_devdata(spi->controller);
 	u32 addr = 0, len, rdlen, len_words, from = 0;
 	int ret = 0;
 	unsigned long timeo = msecs_to_jiffies(100);
@@ -1118,11 +1118,11 @@ static int bcm_qspi_bspi_exec_mem_op(struct spi_device *spi,
 	return ret;
 }
 
-static int bcm_qspi_transfer_one(struct spi_master *master,
+static int bcm_qspi_transfer_one(struct spi_controller *host,
 				 struct spi_device *spi,
 				 struct spi_transfer *trans)
 {
-	struct bcm_qspi *qspi = spi_master_get_devdata(master);
+	struct bcm_qspi *qspi = spi_controller_get_devdata(host);
 	int slots;
 	unsigned long timeo = msecs_to_jiffies(100);
 
@@ -1150,8 +1150,8 @@ static int bcm_qspi_transfer_one(struct spi_master *master,
 static int bcm_qspi_mspi_exec_mem_op(struct spi_device *spi,
 				     const struct spi_mem_op *op)
 {
-	struct spi_master *master = spi->master;
-	struct bcm_qspi *qspi = spi_master_get_devdata(master);
+	struct spi_controller *host = spi->controller;
+	struct bcm_qspi *qspi = spi_controller_get_devdata(host);
 	struct spi_transfer t[2];
 	u8 cmd[6] = { };
 	int ret, i;
@@ -1171,7 +1171,7 @@ static int bcm_qspi_mspi_exec_mem_op(struct spi_device *spi,
 	t[0].tx_nbits = op->cmd.buswidth;
 	/* lets mspi know that this is not last transfer */
 	qspi->trans_pos.mspi_last_trans = false;
-	ret = bcm_qspi_transfer_one(master, spi, &t[0]);
+	ret = bcm_qspi_transfer_one(host, spi, &t[0]);
 
 	/* rx */
 	qspi->trans_pos.mspi_last_trans = true;
@@ -1181,7 +1181,7 @@ static int bcm_qspi_mspi_exec_mem_op(struct spi_device *spi,
 		t[1].len = op->data.nbytes;
 		t[1].rx_nbits =  op->data.buswidth;
 		t[1].bits_per_word = spi->bits_per_word;
-		ret = bcm_qspi_transfer_one(master, spi, &t[1]);
+		ret = bcm_qspi_transfer_one(host, spi, &t[1]);
 	}
 
 	return ret;
@@ -1191,7 +1191,7 @@ static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
 				const struct spi_mem_op *op)
 {
 	struct spi_device *spi = mem->spi;
-	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+	struct bcm_qspi *qspi = spi_controller_get_devdata(spi->controller);
 	int ret = 0;
 	bool mspi_read = false;
 	u32 addr = 0, len;
@@ -1486,7 +1486,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	const struct bcm_qspi_data *data;
 	struct device *dev = &pdev->dev;
 	struct bcm_qspi *qspi;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct resource *res;
 	int irq, ret = 0, num_ints = 0;
 	u32 val;
@@ -1504,13 +1504,13 @@ int bcm_qspi_probe(struct platform_device *pdev,
 
 	data = of_id->data;
 
-	master = devm_spi_alloc_master(dev, sizeof(struct bcm_qspi));
-	if (!master) {
-		dev_err(dev, "error allocating spi_master\n");
+	host = devm_spi_alloc_host(dev, sizeof(struct bcm_qspi));
+	if (!host) {
+		dev_err(dev, "error allocating spi_controller\n");
 		return -ENOMEM;
 	}
 
-	qspi = spi_master_get_devdata(master);
+	qspi = spi_controller_get_devdata(host);
 
 	qspi->clk = devm_clk_get_optional(&pdev->dev, NULL);
 	if (IS_ERR(qspi->clk))
@@ -1520,23 +1520,23 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->trans_pos.trans = NULL;
 	qspi->trans_pos.byte = 0;
 	qspi->trans_pos.mspi_last_trans = true;
-	qspi->master = master;
+	qspi->host = host;
 
-	master->bus_num = -1;
-	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD |
+	host->bus_num = -1;
+	host->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD |
 				SPI_3WIRE;
-	master->setup = bcm_qspi_setup;
-	master->transfer_one = bcm_qspi_transfer_one;
-	master->mem_ops = &bcm_qspi_mem_ops;
-	master->cleanup = bcm_qspi_cleanup;
-	master->dev.of_node = dev->of_node;
-	master->num_chipselect = NUM_CHIPSELECT;
-	master->use_gpio_descriptors = true;
+	host->setup = bcm_qspi_setup;
+	host->transfer_one = bcm_qspi_transfer_one;
+	host->mem_ops = &bcm_qspi_mem_ops;
+	host->cleanup = bcm_qspi_cleanup;
+	host->dev.of_node = dev->of_node;
+	host->num_chipselect = NUM_CHIPSELECT;
+	host->use_gpio_descriptors = true;
 
 	qspi->big_endian = of_device_is_big_endian(dev->of_node);
 
 	if (!of_property_read_u32(dev->of_node, "num-cs", &val))
-		master->num_chipselect = val;
+		host->num_chipselect = val;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hif_mspi");
 	if (!res)
@@ -1659,9 +1659,9 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->xfer_mode.addrlen = -1;
 	qspi->xfer_mode.hp = -1;
 
-	ret = spi_register_master(master);
+	ret = spi_register_controller(host);
 	if (ret < 0) {
-		dev_err(dev, "can't register master\n");
+		dev_err(dev, "can't register host\n");
 		goto qspi_reg_err;
 	}
 
@@ -1682,7 +1682,7 @@ void bcm_qspi_remove(struct platform_device *pdev)
 {
 	struct bcm_qspi *qspi = platform_get_drvdata(pdev);
 
-	spi_unregister_master(qspi->master);
+	spi_unregister_controller(qspi->host);
 	bcm_qspi_hw_uninit(qspi);
 	clk_disable_unprepare(qspi->clk);
 	kfree(qspi->dev_ids);
@@ -1700,7 +1700,7 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
 		qspi->s3_strap_override_ctrl =
 			bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
 
-	spi_master_suspend(qspi->master);
+	spi_controller_suspend(qspi->host);
 	clk_disable_unprepare(qspi->clk);
 	bcm_qspi_hw_uninit(qspi);
 
@@ -1721,7 +1721,7 @@ static int __maybe_unused bcm_qspi_resume(struct device *dev)
 
 	ret = clk_prepare_enable(qspi->clk);
 	if (!ret)
-		spi_master_resume(qspi->master);
+		spi_controller_resume(qspi->host);
 
 	return ret;
 }

drivers/spi/spi-bcm2835aux.c

@@ -20,9 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spinlock.h>
@@ -233,8 +231,8 @@ static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs)
 
 static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
 {
-	struct spi_master *master = dev_id;
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct spi_controller *host = dev_id;
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	/* IRQ may be shared, so return if our interrupts are disabled */
 	if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
@@ -253,17 +251,17 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
 	/* and if rx_len is 0 then disable interrupts and wake up completion */
 	if (!bs->rx_len) {
 		bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
-		spi_finalize_current_transfer(master);
+		spi_finalize_current_transfer(host);
 	}
 
 	return IRQ_HANDLED;
 }
 
-static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
+static int __bcm2835aux_spi_transfer_one_irq(struct spi_controller *host,
 					     struct spi_device *spi,
 					     struct spi_transfer *tfr)
 {
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	/* enable interrupts */
 	bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1] |
@@ -274,11 +272,11 @@ static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
 	return 1;
 }
 
-static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
+static int bcm2835aux_spi_transfer_one_irq(struct spi_controller *host,
 					   struct spi_device *spi,
 					   struct spi_transfer *tfr)
 {
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	/* update statistics */
 	bs->count_transfer_irq++;
@@ -296,14 +294,14 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
 	}
 
 	/* now run the interrupt mode */
-	return __bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
+	return __bcm2835aux_spi_transfer_one_irq(host, spi, tfr);
 }
 
-static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
+static int bcm2835aux_spi_transfer_one_poll(struct spi_controller *host,
 					    struct spi_device *spi,
 					struct spi_transfer *tfr)
 {
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 	unsigned long timeout;
 
 	/* update statistics */
@@ -330,7 +328,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
 					    bs->tx_len, bs->rx_len);
 			/* forward to interrupt handler */
 			bs->count_transfer_irq_after_poll++;
-			return __bcm2835aux_spi_transfer_one_irq(master,
+			return __bcm2835aux_spi_transfer_one_irq(host,
 							       spi, tfr);
 		}
 	}
@@ -339,11 +337,11 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
 	return 0;
 }
 
-static int bcm2835aux_spi_transfer_one(struct spi_master *master,
+static int bcm2835aux_spi_transfer_one(struct spi_controller *host,
 				       struct spi_device *spi,
 				       struct spi_transfer *tfr)
 {
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 	unsigned long spi_hz, clk_hz, speed;
 	unsigned long hz_per_byte, byte_limit;
 
@@ -394,17 +392,17 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
 
 	/* run in polling mode for short transfers */
 	if (tfr->len < byte_limit)
-		return bcm2835aux_spi_transfer_one_poll(master, spi, tfr);
+		return bcm2835aux_spi_transfer_one_poll(host, spi, tfr);
 
 	/* run in interrupt mode for all others */
-	return bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
+	return bcm2835aux_spi_transfer_one_irq(host, spi, tfr);
 }
 
-static int bcm2835aux_spi_prepare_message(struct spi_master *master,
+static int bcm2835aux_spi_prepare_message(struct spi_controller *host,
 					  struct spi_message *msg)
 {
 	struct spi_device *spi = msg->spi;
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
 		      BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
@@ -424,20 +422,20 @@ static int bcm2835aux_spi_prepare_message(struct spi_master *master,
 	return 0;
 }
 
-static int bcm2835aux_spi_unprepare_message(struct spi_master *master,
+static int bcm2835aux_spi_unprepare_message(struct spi_controller *host,
 					    struct spi_message *msg)
 {
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	bcm2835aux_spi_reset_hw(bs);
 
 	return 0;
 }
 
-static void bcm2835aux_spi_handle_err(struct spi_master *master,
+static void bcm2835aux_spi_handle_err(struct spi_controller *host,
 				      struct spi_message *msg)
 {
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	bcm2835aux_spi_reset_hw(bs);
 }
@@ -475,18 +473,18 @@ static int bcm2835aux_spi_setup(struct spi_device *spi)
 
 static int bcm2835aux_spi_probe(struct platform_device *pdev)
 {
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct bcm2835aux_spi *bs;
 	unsigned long clk_hz;
 	int err;
 
-	master = devm_spi_alloc_master(&pdev->dev, sizeof(*bs));
-	if (!master)
+	host = devm_spi_alloc_host(&pdev->dev, sizeof(*bs));
+	if (!host)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, master);
-	master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
-	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	platform_set_drvdata(pdev, host);
+	host->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
+	host->bits_per_word_mask = SPI_BPW_MASK(8);
 	/* even though the driver never officially supported native CS
 	 * allow a single native CS for legacy DT support purposes when
 	 * no cs-gpio is configured.
@@ -498,16 +496,16 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 	 * * cs_delay_usec: cs is always deasserted one SCK cycle after
 	 *     a spi_transfer
 	 */
-	master->num_chipselect = 1;
-	master->setup = bcm2835aux_spi_setup;
-	master->transfer_one = bcm2835aux_spi_transfer_one;
-	master->handle_err = bcm2835aux_spi_handle_err;
-	master->prepare_message = bcm2835aux_spi_prepare_message;
-	master->unprepare_message = bcm2835aux_spi_unprepare_message;
-	master->dev.of_node = pdev->dev.of_node;
-	master->use_gpio_descriptors = true;
+	host->num_chipselect = 1;
+	host->setup = bcm2835aux_spi_setup;
+	host->transfer_one = bcm2835aux_spi_transfer_one;
+	host->handle_err = bcm2835aux_spi_handle_err;
+	host->prepare_message = bcm2835aux_spi_prepare_message;
+	host->unprepare_message = bcm2835aux_spi_unprepare_message;
+	host->dev.of_node = pdev->dev.of_node;
+	host->use_gpio_descriptors = true;
 
-	bs = spi_master_get_devdata(master);
+	bs = spi_controller_get_devdata(host);
 
 	/* the main area */
 	bs->regs = devm_platform_ioremap_resource(pdev, 0);
@@ -522,8 +520,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 	}
 
 	bs->irq = platform_get_irq(pdev, 0);
-	if (bs->irq <= 0)
-		return bs->irq ? bs->irq : -ENODEV;
+	if (bs->irq < 0)
+		return bs->irq;
 
 	/* this also enables the HW block */
 	err = clk_prepare_enable(bs->clk);
@@ -546,15 +544,15 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 	err = devm_request_irq(&pdev->dev, bs->irq,
 			       bcm2835aux_spi_interrupt,
 			       IRQF_SHARED,
-			       dev_name(&pdev->dev), master);
+			       dev_name(&pdev->dev), host);
 	if (err) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
 		goto out_clk_disable;
 	}
 
-	err = spi_register_master(master);
+	err = spi_register_controller(host);
 	if (err) {
-		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
+		dev_err(&pdev->dev, "could not register SPI host: %d\n", err);
 		goto out_clk_disable;
 	}
 
@@ -569,12 +567,12 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 
 static void bcm2835aux_spi_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = platform_get_drvdata(pdev);
-	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+	struct spi_controller *host = platform_get_drvdata(pdev);
+	struct bcm2835aux_spi *bs = spi_controller_get_devdata(host);
 
 	bcm2835aux_debugfs_remove(bs);
 
-	spi_unregister_master(master);
+	spi_unregister_controller(host);
 
 	bcm2835aux_spi_reset_hw(bs);
 

drivers/spi/spi-bcm63xx.c

@@ -186,7 +186,7 @@ static const unsigned int bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
 static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 				      struct spi_transfer *t)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(spi->controller);
 	u8 clk_cfg, reg;
 	int i;
 
@@ -217,7 +217,7 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
 				unsigned int num_transfers)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(spi->controller);
 	u16 msg_ctl;
 	u16 cmd;
 	unsigned int i, timeout = 0, prepend_len = 0, len = 0;
@@ -312,10 +312,10 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
 	return 0;
 }
 
-static int bcm63xx_spi_transfer_one(struct spi_master *master,
+static int bcm63xx_spi_transfer_one(struct spi_controller *host,
 					struct spi_message *m)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(host);
 	struct spi_transfer *t, *first = NULL;
 	struct spi_device *spi = m->spi;
 	int status = 0;
@@ -385,18 +385,18 @@ static int bcm63xx_spi_transfer_one(struct spi_master *master,
 	}
 exit:
 	m->status = status;
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(host);
 
 	return 0;
 }
 
-/* This driver supports single master mode only. Hence
+/* This driver supports single host mode only. Hence
  * CMD_DONE is the only interrupt we care about
  */
 static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
 {
-	struct spi_master *master = (struct spi_master *)dev_id;
-	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct spi_controller *host = (struct spi_controller *)dev_id;
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(host);
 	u8 intr;
 
 	/* Read interupts and clear them immediately */
@@ -413,7 +413,7 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
 
 static size_t bcm63xx_spi_max_length(struct spi_device *spi)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(spi->controller);
 
 	return bs->fifo_size;
 }
@@ -479,7 +479,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 	const unsigned long *bcm63xx_spireg;
 	struct device *dev = &pdev->dev;
 	int irq, bus_num;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct clk *clk;
 	struct bcm63xx_spi *bs;
 	int ret;
@@ -525,16 +525,16 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(reset))
 		return PTR_ERR(reset);
 
-	master = spi_alloc_master(dev, sizeof(*bs));
-	if (!master) {
+	host = spi_alloc_host(dev, sizeof(*bs));
+	if (!host) {
 		dev_err(dev, "out of memory\n");
 		return -ENOMEM;
 	}
 
-	bs = spi_master_get_devdata(master);
+	bs = spi_controller_get_devdata(host);
 	init_completion(&bs->done);
 
-	platform_set_drvdata(pdev, master);
+	platform_set_drvdata(pdev, host);
 	bs->pdev = pdev;
 
 	bs->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
@@ -549,21 +549,21 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 	bs->fifo_size = bs->reg_offsets[SPI_MSG_DATA_SIZE];
 
 	ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
-							pdev->name, master);
+			       pdev->name, host);
 	if (ret) {
 		dev_err(dev, "unable to request irq\n");
 		goto out_err;
 	}
 
-	master->dev.of_node = dev->of_node;
-	master->bus_num = bus_num;
-	master->num_chipselect = num_cs;
-	master->transfer_one_message = bcm63xx_spi_transfer_one;
-	master->mode_bits = MODEBITS;
-	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->max_transfer_size = bcm63xx_spi_max_length;
-	master->max_message_size = bcm63xx_spi_max_length;
-	master->auto_runtime_pm = true;
+	host->dev.of_node = dev->of_node;
+	host->bus_num = bus_num;
+	host->num_chipselect = num_cs;
+	host->transfer_one_message = bcm63xx_spi_transfer_one;
+	host->mode_bits = MODEBITS;
+	host->bits_per_word_mask = SPI_BPW_MASK(8);
+	host->max_transfer_size = bcm63xx_spi_max_length;
+	host->max_message_size = bcm63xx_spi_max_length;
+	host->auto_runtime_pm = true;
 	bs->msg_type_shift = bs->reg_offsets[SPI_MSG_TYPE_SHIFT];
 	bs->msg_ctl_width = bs->reg_offsets[SPI_MSG_CTL_WIDTH];
 	bs->tx_io = (u8 *)(bs->regs + bs->reg_offsets[SPI_MSG_DATA]);
@@ -585,7 +585,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	/* register and we are done */
-	ret = devm_spi_register_master(dev, master);
+	ret = devm_spi_register_controller(dev, host);
 	if (ret) {
 		dev_err(dev, "spi register failed\n");
 		goto out_pm_disable;
@@ -601,14 +601,14 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 out_clk_disable:
 	clk_disable_unprepare(clk);
 out_err:
-	spi_master_put(master);
+	spi_controller_put(host);
 	return ret;
 }
 
 static void bcm63xx_spi_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = platform_get_drvdata(pdev);
-	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct spi_controller *host = platform_get_drvdata(pdev);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(host);
 
 	/* reset spi block */
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
@@ -619,10 +619,10 @@ static void bcm63xx_spi_remove(struct platform_device *pdev)
 
 static int bcm63xx_spi_suspend(struct device *dev)
 {
-	struct spi_master *master = dev_get_drvdata(dev);
-	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct spi_controller *host = dev_get_drvdata(dev);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(host);
 
-	spi_master_suspend(master);
+	spi_controller_suspend(host);
 
 	clk_disable_unprepare(bs->clk);
 
@@ -631,15 +631,15 @@ static int bcm63xx_spi_suspend(struct device *dev)
 
 static int bcm63xx_spi_resume(struct device *dev)
 {
-	struct spi_master *master = dev_get_drvdata(dev);
-	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct spi_controller *host = dev_get_drvdata(dev);
+	struct bcm63xx_spi *bs = spi_controller_get_devdata(host);
 	int ret;
 
 	ret = clk_prepare_enable(bs->clk);
 	if (ret)
 		return ret;
 
-	spi_master_resume(master);
+	spi_controller_resume(host);
 
 	return 0;
 }