ice: Implement functions for reading and setting GPIO pins

Implement ice_aq_get_gpio and ice_aq_set_gpio for reading and changing
the state of GPIO pins described in the topology.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/ice/ice_adminq_cmd.h

@@ -1344,6 +1344,16 @@ struct ice_aqc_set_port_id_led {
 	u8 rsvd[13];
 };
 
+/* Set/Get GPIO (direct, 0x06EC/0x06ED) */
+struct ice_aqc_gpio {
+	__le16 gpio_ctrl_handle;
+#define ICE_AQC_GPIO_HANDLE_S	0
+#define ICE_AQC_GPIO_HANDLE_M	(0x3FF << ICE_AQC_GPIO_HANDLE_S)
+	u8 gpio_num;
+	u8 gpio_val;
+	u8 rsvd[12];
+};
+
 /* Read/Write SFF EEPROM command (indirect 0x06EE) */
 struct ice_aqc_sff_eeprom {
 	u8 lport_num;
@@ -1985,6 +1995,7 @@ struct ice_aq_desc {
 		struct ice_aqc_get_phy_caps get_phy;
 		struct ice_aqc_set_phy_cfg set_phy;
 		struct ice_aqc_restart_an restart_an;
+		struct ice_aqc_gpio read_write_gpio;
 		struct ice_aqc_sff_eeprom read_write_sff_param;
 		struct ice_aqc_set_port_id_led set_port_id_led;
 		struct ice_aqc_get_sw_cfg get_sw_conf;
@@ -2140,6 +2151,8 @@ enum ice_adminq_opc {
 	ice_aqc_opc_set_mac_lb				= 0x0620,
 	ice_aqc_opc_get_link_topo			= 0x06E0,
 	ice_aqc_opc_set_port_id_led			= 0x06E9,
+	ice_aqc_opc_set_gpio				= 0x06EC,
+	ice_aqc_opc_get_gpio				= 0x06ED,
 	ice_aqc_opc_sff_eeprom				= 0x06EE,
 
 	/* NVM commands */

drivers/net/ethernet/intel/ice/ice_common.c

@@ -4794,6 +4794,64 @@ ice_aq_get_driver_param(struct ice_hw *hw, enum ice_aqc_driver_params idx,
 	return 0;
 }
 
+/**
+ * ice_aq_set_gpio
+ * @hw: pointer to the hw struct
+ * @gpio_ctrl_handle: GPIO controller node handle
+ * @pin_idx: IO Number of the GPIO that needs to be set
+ * @value: SW provide IO value to set in the LSB
+ * @cd: pointer to command details structure or NULL
+ *
+ * Sends 0x06EC AQ command to set the GPIO pin state that's part of the topology
+ */
+int
+ice_aq_set_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx, bool value,
+		struct ice_sq_cd *cd)
+{
+	struct ice_aqc_gpio *cmd;
+	struct ice_aq_desc desc;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_set_gpio);
+	cmd = &desc.params.read_write_gpio;
+	cmd->gpio_ctrl_handle = cpu_to_le16(gpio_ctrl_handle);
+	cmd->gpio_num = pin_idx;
+	cmd->gpio_val = value ? 1 : 0;
+
+	return ice_status_to_errno(ice_aq_send_cmd(hw, &desc, NULL, 0, cd));
+}
+
+/**
+ * ice_aq_get_gpio
+ * @hw: pointer to the hw struct
+ * @gpio_ctrl_handle: GPIO controller node handle
+ * @pin_idx: IO Number of the GPIO that needs to be set
+ * @value: IO value read
+ * @cd: pointer to command details structure or NULL
+ *
+ * Sends 0x06ED AQ command to get the value of a GPIO signal which is part of
+ * the topology
+ */
+int
+ice_aq_get_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+		bool *value, struct ice_sq_cd *cd)
+{
+	struct ice_aqc_gpio *cmd;
+	struct ice_aq_desc desc;
+	enum ice_status status;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_gpio);
+	cmd = &desc.params.read_write_gpio;
+	cmd->gpio_ctrl_handle = cpu_to_le16(gpio_ctrl_handle);
+	cmd->gpio_num = pin_idx;
+
+	status = ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
+	if (status)
+		return ice_status_to_errno(status);
+
+	*value = !!cmd->gpio_val;
+	return 0;
+}
+
 /**
  * ice_fw_supports_link_override
  * @hw: pointer to the hardware structure

drivers/net/ethernet/intel/ice/ice_common.h

@@ -192,6 +192,12 @@ ice_aq_set_driver_param(struct ice_hw *hw, enum ice_aqc_driver_params idx,
 int
 ice_aq_get_driver_param(struct ice_hw *hw, enum ice_aqc_driver_params idx,
 			u32 *value, struct ice_sq_cd *cd);
+int
+ice_aq_set_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx, bool value,
+		struct ice_sq_cd *cd);
+int
+ice_aq_get_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+		bool *value, struct ice_sq_cd *cd);
 enum ice_status
 ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,
 		    struct ice_sq_cd *cd);