net: dpaa2-switch: serialize changes to priv->mac with a mutex

The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth
driver, so we need to duplicate the locking solution established by the
previous change to the switch driver as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c

@@ -60,11 +60,18 @@ dpaa2_switch_get_link_ksettings(struct net_device *netdev,
 {
 	struct ethsw_port_priv *port_priv = netdev_priv(netdev);
 	struct dpsw_link_state state = {0};
-	int err = 0;
+	int err;
+
+	mutex_lock(&port_priv->mac_lock);
 
-	if (dpaa2_switch_port_is_type_phy(port_priv))
-		return phylink_ethtool_ksettings_get(port_priv->mac->phylink,
+	if (dpaa2_switch_port_is_type_phy(port_priv)) {
+		err = phylink_ethtool_ksettings_get(port_priv->mac->phylink,
 						    link_ksettings);
+		mutex_unlock(&port_priv->mac_lock);
+		return err;
+	}
+
+	mutex_unlock(&port_priv->mac_lock);
 
 	err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
 				     port_priv->ethsw_data->dpsw_handle,
@@ -99,9 +106,16 @@ dpaa2_switch_set_link_ksettings(struct net_device *netdev,
 	bool if_running;
 	int err = 0, ret;
 
-	if (dpaa2_switch_port_is_type_phy(port_priv))
-		return phylink_ethtool_ksettings_set(port_priv->mac->phylink,
+	mutex_lock(&port_priv->mac_lock);
+
+	if (dpaa2_switch_port_is_type_phy(port_priv)) {
+		err = phylink_ethtool_ksettings_set(port_priv->mac->phylink,
 						    link_ksettings);
+		mutex_unlock(&port_priv->mac_lock);
+		return err;
+	}
+
+	mutex_unlock(&port_priv->mac_lock);
 
 	/* Interface needs to be down to change link settings */
 	if_running = netif_running(netdev);
@@ -189,8 +203,12 @@ static void dpaa2_switch_ethtool_get_stats(struct net_device *netdev,
 				   dpaa2_switch_ethtool_counters[i].name, err);
 	}
 
+	mutex_lock(&port_priv->mac_lock);
+
 	if (dpaa2_switch_port_has_mac(port_priv))
 		dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
+
+	mutex_unlock(&port_priv->mac_lock);
 }
 
 const struct ethtool_ops dpaa2_switch_port_ethtool_ops = {

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

@@ -602,8 +602,11 @@ static int dpaa2_switch_port_link_state_update(struct net_device *netdev)
 
 	/* When we manage the MAC/PHY using phylink there is no need
 	 * to manually update the netif_carrier.
+	 * We can avoid locking because we are called from the "link changed"
+	 * IRQ handler, which is the same as the "endpoint changed" IRQ handler
+	 * (the writer to port_priv->mac), so we cannot race with it.
 	 */
-	if (dpaa2_switch_port_is_type_phy(port_priv))
+	if (dpaa2_mac_is_type_phy(port_priv->mac))
 		return 0;
 
 	/* Interrupts are received even though no one issued an 'ifconfig up'
@@ -683,6 +686,8 @@ static int dpaa2_switch_port_open(struct net_device *netdev)
 	struct ethsw_core *ethsw = port_priv->ethsw_data;
 	int err;
 
+	mutex_lock(&port_priv->mac_lock);
+
 	if (!dpaa2_switch_port_is_type_phy(port_priv)) {
 		/* Explicitly set carrier off, otherwise
 		 * netif_carrier_ok() will return true and cause 'ip link show'
@@ -696,6 +701,7 @@ static int dpaa2_switch_port_open(struct net_device *netdev)
 			     port_priv->ethsw_data->dpsw_handle,
 			     port_priv->idx);
 	if (err) {
+		mutex_unlock(&port_priv->mac_lock);
 		netdev_err(netdev, "dpsw_if_enable err %d\n", err);
 		return err;
 	}
@@ -705,6 +711,8 @@ static int dpaa2_switch_port_open(struct net_device *netdev)
 	if (dpaa2_switch_port_is_type_phy(port_priv))
 		dpaa2_mac_start(port_priv->mac);
 
+	mutex_unlock(&port_priv->mac_lock);
+
 	return 0;
 }
 
@@ -714,6 +722,8 @@ static int dpaa2_switch_port_stop(struct net_device *netdev)
 	struct ethsw_core *ethsw = port_priv->ethsw_data;
 	int err;
 
+	mutex_lock(&port_priv->mac_lock);
+
 	if (dpaa2_switch_port_is_type_phy(port_priv)) {
 		dpaa2_mac_stop(port_priv->mac);
 	} else {
@@ -721,6 +731,8 @@ static int dpaa2_switch_port_stop(struct net_device *netdev)
 		netif_carrier_off(netdev);
 	}
 
+	mutex_unlock(&port_priv->mac_lock);
+
 	err = dpsw_if_disable(port_priv->ethsw_data->mc_io, 0,
 			      port_priv->ethsw_data->dpsw_handle,
 			      port_priv->idx);
@@ -1460,7 +1472,9 @@ static int dpaa2_switch_port_connect_mac(struct ethsw_port_priv *port_priv)
 		}
 	}
 
+	mutex_lock(&port_priv->mac_lock);
 	port_priv->mac = mac;
+	mutex_unlock(&port_priv->mac_lock);
 
 	return 0;
 
@@ -1473,9 +1487,12 @@ static int dpaa2_switch_port_connect_mac(struct ethsw_port_priv *port_priv)
 
 static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
 {
-	struct dpaa2_mac *mac = port_priv->mac;
+	struct dpaa2_mac *mac;
 
+	mutex_lock(&port_priv->mac_lock);
+	mac = port_priv->mac;
 	port_priv->mac = NULL;
+	mutex_unlock(&port_priv->mac_lock);
 
 	if (!mac)
 		return;
@@ -1494,6 +1511,7 @@ static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg)
 	struct ethsw_port_priv *port_priv;
 	u32 status = ~0;
 	int err, if_id;
+	bool had_mac;
 
 	err = dpsw_get_irq_status(ethsw->mc_io, 0, ethsw->dpsw_handle,
 				  DPSW_IRQ_INDEX_IF, &status);
@@ -1512,7 +1530,12 @@ static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg)
 
 	if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
 		rtnl_lock();
-		if (dpaa2_switch_port_has_mac(port_priv))
+		/* We can avoid locking because the "endpoint changed" IRQ
+		 * handler is the only one who changes priv->mac at runtime,
+		 * so we are not racing with anyone.
+		 */
+		had_mac = !!port_priv->mac;
+		if (had_mac)
 			dpaa2_switch_port_disconnect_mac(port_priv);
 		else
 			dpaa2_switch_port_connect_mac(port_priv);
@@ -3255,6 +3278,8 @@ static int dpaa2_switch_probe_port(struct ethsw_core *ethsw,
 	port_priv->netdev = port_netdev;
 	port_priv->ethsw_data = ethsw;
 
+	mutex_init(&port_priv->mac_lock);
+
 	port_priv->idx = port_idx;
 	port_priv->stp_state = BR_STATE_FORWARDING;
 

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h

@@ -161,6 +161,8 @@ struct ethsw_port_priv {
 
 	struct dpaa2_switch_filter_block *filter_block;
 	struct dpaa2_mac	*mac;
+	/* Protects against changes to port_priv->mac */
+	struct mutex		mac_lock;
 };
 
 /* Switch data */