Import 2.1.28pre1

MAINTAINERS

@@ -142,6 +142,7 @@ BUSLOGIC SCSI DRIVER
 P:	Leonard N. Zubkoff
 M:	Leonard N. Zubkoff <lnz@dandelion.com>
 L:	linux-scsi@vger.rutgers.edu
+W:	http://www.dandelion.com/Linux/
 S:	Maintained
 
 CYCLADES ASYNC MUX DRIVER
@@ -303,6 +304,12 @@ M:	ecd@skynet.be
 L:	sparclinux@vger.rutgers.edu
 S:	Maintained
 
+SCSI SUBSYSTEM
+P:	Leonard N. Zubkoff
+M:	Leonard N. Zubkoff <lnz@dandelion.com>
+L:	linux-scsi@vger.rutgers.edu
+S:	Maintained
+
 SVGA HANDLING:
 P:	Martin Mares
 M:	mj@k332.feld.cvut.cz

Makefile

 VERSION = 2
 PATCHLEVEL = 1
-SUBLEVEL = 27
+SUBLEVEL = 28
 
 ARCH = i386
 

arch/alpha/kernel/entry.S

@@ -125,7 +125,7 @@ entInt:
 	lda	$0,intr_count
 	ldl	$1,0($0)
 	addq	$1,1,$1
-	stq	$1,0($0)
+	stl	$1,0($0)
 /* set up the arguments to the C interrupt handler */
 	ldq	$8,current_set
 	jsr	$26,do_entInt
@@ -133,7 +133,7 @@ entInt:
 	lda	$0,intr_count
 	ldl	$1,0($0)
 	subq	$1,1,$1
-	stq	$1,0($0)
+	stl	$1,0($0)
 	br	$31,ret_from_sys_call
 .end entInt
 
@@ -710,7 +710,7 @@ sys_call_table:
 /*0*/	.quad do_entSys, sys_exit, sys_fork, sys_read, sys_write
 	.quad do_entSys, sys_close, sys_wait4, do_entSys, sys_link
 	.quad sys_unlink, do_entSys, sys_chdir, sys_fchdir, sys_mknod
-	.quad sys_chmod, sys_chown, sys_brk, do_entSys, sys_lseek
+	.quad sys_chmod, sys_chown, osf_brk, do_entSys, sys_lseek
 	.quad sys_getxpid, osf_mount, osf_umount, sys_setuid, sys_getxuid
 	.quad do_entSys, sys_ptrace, do_entSys, do_entSys, do_entSys
 	.quad do_entSys, do_entSys, do_entSys, sys_access, do_entSys

arch/alpha/kernel/osf_sys.c

@@ -47,6 +47,20 @@ extern asmlinkage int sys_umount(char *);
 extern asmlinkage int sys_swapon(const char *specialfile, int swap_flags);
 extern asmlinkage unsigned long sys_brk(unsigned long);
 
+/*
+ * Brk needs to return an error.  Still support Linux's brk(0) query idiom,
+ * which OSF programs just shouldn't be doing.  We're still not quite
+ * identical to OSF as we don't return 0 on success, but doing otherwise
+ * would require changes to libc.  Hopefully this is good enough.
+ */
+asmlinkage unsigned long osf_brk(unsigned long brk)
+{
+	unsigned long retval = sys_brk(brk);
+	if (brk && brk != retval)
+		retval = -ENOMEM;
+	return retval;
+}
+ 
 /*
  * This is pure guess-work..
  */

arch/alpha/lib/csum_partial_copy.c

@@ -304,20 +304,14 @@ csum_partial_cfu_unaligned(unsigned long * src, unsigned long * dst,
 	return checksum;
 }
 
-unsigned int
-csum_partial_copy_from_user(int *errp, char *src, char *dst,
-			    int len, unsigned int sum)
+static unsigned int
+do_csum_partial_copy_from_user(char *src, char *dst, int len,
+			       unsigned int sum, int *errp)
 {
 	unsigned long checksum = (unsigned) sum;
 	unsigned long soff = 7 & (unsigned long) src;
 	unsigned long doff = 7 & (unsigned long) dst;
 
-	if (!access_ok(src, len, VERIFY_READ)) {
-		*errp = -EFAULT;
-		memset(dst, 0, len);
-		return checksum;
-	}
-
 	if (len) {
 		if (!doff) {
 			if (!soff)
@@ -357,13 +351,26 @@ csum_partial_copy_from_user(int *errp, char *src, char *dst,
 	return checksum;
 }
 
+unsigned int
+csum_partial_copy_from_user(char *src, char *dst, int len,
+			    unsigned int sum, int *errp)
+{
+	if (!access_ok(src, len, VERIFY_READ)) {
+		*errp = -EFAULT;
+		memset(dst, 0, len);
+		return sum;
+	}
+
+	return do_csum_partial_copy_from_user(src, dst, len, sum, errp);
+}
+
 unsigned int
 csum_partial_copy (const char *src, char *dst, int len, unsigned int sum)
 {
 	unsigned int ret;
 	int error = 0;
 
-	ret = csum_partial_copy_from_user(&error, src, dst, len, sum);
+	ret = do_csum_partial_copy_from_user(src, dst, len, sum, &error);
 	if (error)
 		printk("csum_partial_copy_old(): tell mingo to convert me!\n");
 

arch/i386/defconfig

@@ -120,6 +120,7 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_AM53C974 is not set
 CONFIG_SCSI_BUSLOGIC=y
+CONFIG_SCSI_OMIT_FLASHPOINT=y
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA_DMA is not set
 # CONFIG_SCSI_EATA_PIO is not set
@@ -201,11 +202,8 @@ CONFIG_ISO9660_FS=y
 # Character devices
 #
 CONFIG_SERIAL=y
-# CONFIG_DIGI is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_STALDRV is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_ESPSERIAL is not set
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_PRINTER is not set
 CONFIG_MOUSE=y
 # CONFIG_ATIXL_BUSMOUSE is not set

arch/i386/kernel/irq.c

@@ -349,7 +349,7 @@ asmlinkage void do_IRQ(int irq, struct pt_regs * regs)
 	int do_random = 0;
 
 	lock_kernel();
-	intr_count++;
+	atomic_inc(&intr_count);
 #ifdef __SMP__
 	if(smp_threads_ready && active_kernel_processor!=smp_processor_id())
 		panic("IRQ %d: active processor set wrongly(%d not %d).\n", irq, active_kernel_processor, smp_processor_id());
@@ -366,7 +366,7 @@ asmlinkage void do_IRQ(int irq, struct pt_regs * regs)
 	}
 	if (do_random & SA_SAMPLE_RANDOM)
 		add_interrupt_randomness(irq);
-	intr_count--;
+	atomic_dec(&intr_count);
 	unlock_kernel();
 }
 

drivers/char/ChangeLog

+Thu Feb 27 01:53:08 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
+
+	* serial.c (change_speed): Add support for the termios flag
+		CMSPAR, which allows the user to select stick parity.
+		(i.e, if PARODD is set, the the parity bit is always 1; if
+		PARRODD is not set, then the parity bit is always 0).
+
+Wed Feb 26 19:03:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
+
+	* serial.c (cleanup_module): Fix memory leak when using the serial
+		driver as a module; make sure tmp_buf gets freed!
+
+Tue Feb 25 11:01:59 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
+
+	* serial.c (set_modem_info): Add support for setting and clearing
+		the OUT1 and OUT2 bits.  (For special case UART's, usually
+		for half-duplex.)
+		(autoconfig, change_speed): Fix TI 16750 support.
+
+Sun Feb 16 00:14:43 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
+
+	* tty_io.c (release_dev): Add sanity check to make sure there are
+		no waiters on tty->read_wait or tty->write_wait.
+
+	* serial.c (rs_init): Don't autoconfig a device if the I/O region
+		is already reserved.
+
+	* serial.c (serial_proc_info): Add support for /proc/serial.
+
+Thu Feb 13 00:49:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
+
+	* serial.c (receive_chars): When the UART repotrs an overrun
+ 		condition, it does so with a valid character.  Changed to
+ 		not throw away the valid character, but instead report the
+		overrun after the valid character.
+
+	* serial.c: Added new #ifdef's for some of the advanced serial
+		driver features.  A minimal driver that only supports COM
+		1/2/3/4 without sharing serial interrupts only takes 17k;
+		the full driver takes 32k.
+		
+Wed Feb 12 14:50:44 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
+
+	* vt.c:
+	* pty.c: 
+	* tty_ioctl.c: 
+	* serial.c: Update routines to use the new 2.1 memory access
+	 	routines.
+
 Wed Dec  4 07:51:52 1996  Theodre Ts'o  <tytso@localhost.mit.edu>
 
 	* serial.c (change_speed): Use save_flags(); cli() and

drivers/char/Config.in

@@ -4,19 +4,29 @@
 mainmenu_option next_comment
 comment 'Character devices'
 
-tristate 'Standard/generic serial support' CONFIG_SERIAL
-bool 'Digiboard PC/Xx Support' CONFIG_DIGI
-tristate 'Cyclades async mux support' CONFIG_CYCLADES
-bool 'Stallion multiport serial support' CONFIG_STALDRV
-if [ "$CONFIG_STALDRV" = "y" ]; then
+tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
+bool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED
+if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
+   bool '   Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
+   bool '   Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
+   bool '   Support special multiport boards' CONFIG_SERIAL_MULTIPORT
+   bool '   Support the Bell Technologies HUB6 card' CONFIG_HUB6
+fi
+bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
+if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
+   bool 'Digiboard PC/Xx Support' CONFIG_DIGI
+   tristate 'Cyclades async mux support' CONFIG_CYCLADES
+   bool 'Stallion multiport serial support' CONFIG_STALDRV
+   if [ "$CONFIG_STALDRV" = "y" ]; then
      tristate '  Stallion EasyIO or EC8/32 support' CONFIG_STALLION
      tristate '  Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
-fi
-tristate 'SDL RISCom/8 card support' CONFIG_RISCOM8
-tristate 'Hayes ESP serial port support' CONFIG_ESPSERIAL
-if [ "$CONFIG_ESPSERIAL" = "y" -o "$CONFIG_ESPSERIAL" = "m" ]; then
+   fi
+   tristate 'SDL RISCom/8 card support' CONFIG_RISCOM8
+   tristate 'Hayes ESP serial port support' CONFIG_ESPSERIAL
+   if [ "$CONFIG_ESPSERIAL" = "y" -o "$CONFIG_ESPSERIAL" = "m" ]; then
      int '  DMA channel' CONFIG_ESPSERIAL_DMA_CHANNEL 1
      int '  FIFO trigger level' CONFIG_ESPSERIAL_TRIGGER_LEVEL 768
+   fi
 fi
 tristate 'Parallel printer support' CONFIG_PRINTER
 

drivers/char/n_tty.c

@@ -1010,6 +1010,7 @@ static unsigned int normal_poll(struct tty_struct * tty, struct file * file, pol
 
 struct tty_ldisc tty_ldisc_N_TTY = {
 	TTY_LDISC_MAGIC,	/* magic */
+	"n_tty",		/* name */
 	0,			/* num */
 	0,			/* flags */
 	n_tty_open,		/* open */

drivers/char/pty.c

@@ -4,14 +4,6 @@
  *  Copyright (C) 1991, 1992  Linus Torvalds
  */
 
-/*
- *	pty.c
- *
- * This module exports the following pty function:
- * 
- * 	int  pty_open(struct tty_struct * tty, struct file * filp);
- */
-
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
@@ -47,8 +39,8 @@ struct pty_struct {
 static unsigned char *tmp_buf;
 static struct semaphore tmp_buf_sem = MUTEX;
 
-struct tty_driver pty_driver, pty_slave_driver;
-struct tty_driver old_pty_driver, old_pty_slave_driver;
+static struct tty_driver pty_driver, pty_slave_driver;
+static struct tty_driver old_pty_driver, old_pty_slave_driver;
 static int pty_refcount;
 
 static struct tty_struct *pty_table[NR_PTYS];
@@ -74,8 +66,10 @@ static void pty_close(struct tty_struct * tty, struct file * filp)
 	}
 	wake_up_interruptible(&tty->read_wait);
 	wake_up_interruptible(&tty->write_wait);
+	tty->packet = 0;
 	if (!tty->link)
 		return;
+	tty->link->packet = 0;
 	wake_up_interruptible(&tty->link->read_wait);
 	wake_up_interruptible(&tty->link->write_wait);
 	set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
@@ -125,7 +119,12 @@ static int pty_write(struct tty_struct * tty, int from_user,
 			((tty->driver.subtype-1) * PTY_BUF_SIZE);
 		while (count > 0) {
 			n = MIN(count, PTY_BUF_SIZE);
-			copy_from_user(temp_buffer, buf, n);
+			n -= copy_from_user(temp_buffer, buf, n);
+			if (!n) {
+				if (!c)
+					c = -EFAULT;
+				break;
+			}
 			r = to->ldisc.receive_room(to);
 			if (r <= 0)
 				break;
@@ -179,7 +178,7 @@ static void pty_flush_buffer(struct tty_struct *tty)
 	}
 }
 
-int pty_open(struct tty_struct *tty, struct file * filp)
+static int pty_open(struct tty_struct *tty, struct file * filp)
 {
 	int	retval;
 	int	line;
@@ -230,6 +229,7 @@ int pty_init(void)
 	memset(&pty_state, 0, sizeof(pty_state));
 	memset(&pty_driver, 0, sizeof(struct tty_driver));
 	pty_driver.magic = TTY_DRIVER_MAGIC;
+	pty_driver.driver_name = "pty_master";
 	pty_driver.name = "pty";
 	pty_driver.major = PTY_MASTER_MAJOR;
 	pty_driver.minor_start = 0;
@@ -258,6 +258,8 @@ int pty_init(void)
 	pty_driver.set_termios = pty_set_termios;
 
 	pty_slave_driver = pty_driver;
+	pty_slave_driver.driver_name = "pty_slave";
+	pty_slave_driver.proc_entry = 0;
 	pty_slave_driver.name = "ttyp";
 	pty_slave_driver.subtype = PTY_TYPE_SLAVE;
 	pty_slave_driver.major = PTY_SLAVE_MAJOR;
@@ -270,12 +272,16 @@ int pty_init(void)
 	pty_slave_driver.other = &pty_driver;
 
 	old_pty_driver = pty_driver;
+	old_pty_driver.driver_name = "compat_pty_master";
+	old_pty_driver.proc_entry = 0;
 	old_pty_driver.major = TTY_MAJOR;
 	old_pty_driver.minor_start = 128;
 	old_pty_driver.num = (NR_PTYS > 64) ? 64 : NR_PTYS;
 	old_pty_driver.other = &old_pty_slave_driver;
 	
 	old_pty_slave_driver = pty_slave_driver;
+	old_pty_slave_driver.driver_name = "compat_pty_slave";
+	old_pty_slave_driver.proc_entry = 0;
 	old_pty_slave_driver.major = TTY_MAJOR;
 	old_pty_slave_driver.minor_start = 192;
 	old_pty_slave_driver.num = (NR_PTYS > 64) ? 64 : NR_PTYS;

drivers/char/tty_io.c

@@ -63,6 +63,9 @@
 #include <linux/string.h>
 #include <linux/malloc.h>
 #include <linux/poll.h>
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#endif
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -1134,6 +1137,25 @@ static void release_dev(struct file * filp)
 	if (tty->count)
 		return;
 
+	/*
+	 * Sanity check --- if tty->count is zero, there shouldn't be
+	 * any waiters on tty->read_wait or tty->write_wait.  But just
+	 * in case....
+	 */
+	while (1) {
+		if (waitqueue_active(&tty->read_wait)) {
+			printk("release_dev: %s: read_wait active?!?\n",
+			       tty_name(tty));
+			wake_up(&tty->read_wait);
+		} else if (waitqueue_active(&tty->write_wait)) {
+			printk("release_dev: %s: write_wait active?!?\n",
+			       tty_name(tty));
+			wake_up(&tty->write_wait);
+		} else
+			break;
+		schedule();
+	}
+	
 	/*
 	 * We're committed; at this point, we must not block!
 	 */
@@ -1232,7 +1254,9 @@ static int tty_open(struct inode * inode, struct file * filp)
 	int minor;
 	int noctty, retval;
 	kdev_t device;
+	unsigned short saved_flags;
 
+	saved_flags = filp->f_flags;
 retry_open:
 	noctty = filp->f_flags & O_NOCTTY;
 	device = inode->i_rdev;
@@ -1240,6 +1264,7 @@ static int tty_open(struct inode * inode, struct file * filp)
 		if (!current->tty)
 			return -ENXIO;
 		device = current->tty->device;
+		filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
 		/* noctty = 1; */
 	}
 	if (device == CONSOLE_DEV) {
@@ -1263,6 +1288,7 @@ static int tty_open(struct inode * inode, struct file * filp)
 		retval = tty->driver.open(tty, filp);
 	else
 		retval = -ENODEV;
+	filp->f_flags = saved_flags;
 
 	if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && !suser())
 		retval = -EBUSY;
@@ -1830,6 +1856,10 @@ int tty_register_driver(struct tty_driver *driver)
 	driver->next = tty_drivers;
 	if (tty_drivers) tty_drivers->prev = driver;
 	tty_drivers = driver;
+	
+#ifdef CONFIG_PROC_FS
+	proc_tty_register_driver(driver);
+#endif	
 	return error;
 }
 
@@ -1871,6 +1901,9 @@ int tty_unregister_driver(struct tty_driver *driver)
 	if (driver->next)
 		driver->next->prev = driver->prev;
 
+#ifdef CONFIG_PROC_FS
+	proc_tty_unregister_driver(driver);
+#endif
 	return 0;
 }
 
@@ -1925,18 +1958,24 @@ int tty_init(void)
 	 */
 	memset(&dev_tty_driver, 0, sizeof(struct tty_driver));
 	dev_tty_driver.magic = TTY_DRIVER_MAGIC;
-	dev_tty_driver.name = "tty";
+	dev_tty_driver.driver_name = "/dev/tty";
+	dev_tty_driver.name = dev_tty_driver.driver_name + 5;
 	dev_tty_driver.name_base = 0;
 	dev_tty_driver.major = TTY_MAJOR;
 	dev_tty_driver.minor_start = 0;
 	dev_tty_driver.num = 1;
+	dev_tty_driver.type = TTY_DRIVER_TYPE_SYSTEM;
+	dev_tty_driver.subtype = SYSTEM_TYPE_TTY;
 	
 	if (tty_register_driver(&dev_tty_driver))
 		panic("Couldn't register /dev/tty driver\n");
 
 	dev_console_driver = dev_tty_driver;
-	dev_console_driver.name = "console";
+	dev_console_driver.driver_name = "/dev/console";
+	dev_console_driver.name = dev_console_driver.driver_name + 5;
 	dev_console_driver.major = TTYAUX_MAJOR;
+	dev_console_driver.type = TTY_DRIVER_TYPE_SYSTEM;
+	dev_console_driver.subtype = SYSTEM_TYPE_CONSOLE;
 
 	if (tty_register_driver(&dev_console_driver))
 		panic("Couldn't register /dev/console driver\n");

drivers/char/tty_ioctl.c

@@ -163,10 +163,10 @@ static int set_termios(struct tty_struct * tty, unsigned long arg, int opt)
 		memcpy(&tmp_termios, tty->termios, sizeof(struct termios));
 		user_termio_to_kernel_termios(&tmp_termios, (struct termio *) arg);
 	} else {
-		retval = verify_area(VERIFY_READ, (void *) arg, sizeof(struct termios));
+		retval = user_termios_to_kernel_termios
+			(&tmp_termios, (struct termios *) arg);
 		if (retval)
 			return retval;
-		user_termios_to_kernel_termios(&tmp_termios, (struct termios *) arg);
 	}
 
 	if ((opt & TERMIOS_FLUSH) && tty->ldisc.flush_buffer)
@@ -240,15 +240,13 @@ static int get_sgttyb(struct tty_struct * tty, struct sgttyb * sgttyb)
 	int retval;
 	struct sgttyb tmp;
 
-	retval = verify_area(VERIFY_WRITE, sgttyb, sizeof(struct sgttyb));
-	if (retval)
-		return retval;
 	tmp.sg_ispeed = 0;
 	tmp.sg_ospeed = 0;
 	tmp.sg_erase = tty->termios->c_cc[VERASE];
 	tmp.sg_kill = tty->termios->c_cc[VKILL];
 	tmp.sg_flags = get_sgflags(tty);
-	copy_to_user(sgttyb, &tmp, sizeof(tmp));
+	if (copy_to_user(sgttyb, &tmp, sizeof(tmp)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -283,14 +281,12 @@ static int set_sgttyb(struct tty_struct * tty, struct sgttyb * sgttyb)
 	struct sgttyb tmp;
 	struct termios termios;
 
-	retval = verify_area(VERIFY_READ, sgttyb, sizeof(struct sgttyb));
-	if (retval)
-		return retval;
 	retval = tty_check_change(tty);
 	if (retval)
 		return retval;
 	termios =  *tty->termios;
-	copy_from_user(&tmp, sgttyb, sizeof(tmp));
+	if (copy_from_user(&tmp, sgttyb, sizeof(tmp)))
+		return -EFAULT;
 	termios.c_cc[VERASE] = tmp.sg_erase;
 	termios.c_cc[VKILL] = tmp.sg_kill;
 	set_sgflags(&termios, tmp.sg_flags);
@@ -305,16 +301,14 @@ static int get_tchars(struct tty_struct * tty, struct tchars * tchars)
 	int retval;
 	struct tchars tmp;
 
-	retval = verify_area(VERIFY_WRITE, tchars, sizeof(struct tchars));
-	if (retval)
-		return retval;
 	tmp.t_intrc = tty->termios->c_cc[VINTR];
 	tmp.t_quitc = tty->termios->c_cc[VQUIT];
 	tmp.t_startc = tty->termios->c_cc[VSTART];
 	tmp.t_stopc = tty->termios->c_cc[VSTOP];
 	tmp.t_eofc = tty->termios->c_cc[VEOF];
 	tmp.t_brkc = tty->termios->c_cc[VEOL2];	/* what is brkc anyway? */
-	copy_to_user(tchars, &tmp, sizeof(tmp));
+	if (copy_to_user(tchars, &tmp, sizeof(tmp)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -323,10 +317,8 @@ static int set_tchars(struct tty_struct * tty, struct tchars * tchars)
 	int retval;
 	struct tchars tmp;
 
-	retval = verify_area(VERIFY_READ, tchars, sizeof(struct tchars));
-	if (retval)
-		return retval;
-	copy_from_user(&tmp, tchars, sizeof(tmp));
+	if (copy_from_user(&tmp, tchars, sizeof(tmp)))
+		return -EFAULT;
 	tty->termios->c_cc[VINTR] = tmp.t_intrc;
 	tty->termios->c_cc[VQUIT] = tmp.t_quitc;
 	tty->termios->c_cc[VSTART] = tmp.t_startc;
@@ -343,16 +335,14 @@ static int get_ltchars(struct tty_struct * tty, struct ltchars * ltchars)
 	int retval;
 	struct ltchars tmp;
 
-	retval = verify_area(VERIFY_WRITE, ltchars, sizeof(struct ltchars));
-	if (retval)
-		return retval;
 	tmp.t_suspc = tty->termios->c_cc[VSUSP];
 	tmp.t_dsuspc = tty->termios->c_cc[VSUSP];	/* what is dsuspc anyway? */
 	tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
 	tmp.t_flushc = tty->termios->c_cc[VEOL2];	/* what is flushc anyway? */
 	tmp.t_werasc = tty->termios->c_cc[VWERASE];
 	tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
-	copy_to_user(ltchars, &tmp, sizeof(tmp));
+	if (copy_to_user(ltchars, &tmp, sizeof(tmp)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -361,10 +351,9 @@ static int set_ltchars(struct tty_struct * tty, struct ltchars * ltchars)
 	int retval;
 	struct ltchars tmp;
 
-	retval = verify_area(VERIFY_READ, ltchars, sizeof(struct ltchars));
-	if (retval)
-		return retval;
-	copy_from_user(&tmp, ltchars, sizeof(tmp));
+	if (copy_from_user(&tmp, ltchars, sizeof(tmp)))
+		return -EFAULT;
+
 	tty->termios->c_cc[VSUSP] = tmp.t_suspc;
 	tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;	/* what is dsuspc anyway? */
 	tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
@@ -427,13 +416,9 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file,
 			return set_ltchars(real_tty, (struct ltchars *) arg);
 #endif
 		case TCGETS:
-			retval = verify_area(VERIFY_WRITE, (void *) arg,
-					     sizeof (struct termios));
-			if (retval)
-				return retval;
-			kernel_termios_to_user_termios((struct termios *)arg,
+			return kernel_termios_to_user_termios
+				((struct termios *)arg,
 				 real_tty->termios);
-			return 0;
 		case TCSETSF:
 			opt |= TERMIOS_FLUSH;
 		case TCSETSW:
@@ -499,53 +484,31 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file,
 			}
 			return 0;
 		case TIOCOUTQ:
-			retval = verify_area(VERIFY_WRITE, (void *) arg,
-					     sizeof (int));
-			if (retval)
-				return retval;
-			if (tty->driver.chars_in_buffer)
-				put_user(tty->driver.chars_in_buffer(tty),
+			return put_user(tty->driver.chars_in_buffer ?
+					tty->driver.chars_in_buffer(tty) : 0,
 					(int *) arg);
-			else
-				put_user(0, (int *) arg);
-			return 0;
 		case TIOCINQ:
-			retval = verify_area(VERIFY_WRITE, (void *) arg,
-					     sizeof (unsigned int));
-			if (retval)
-				return retval;
 			retval = tty->read_cnt;
 			if (L_ICANON(tty))
 				retval = inq_canon(tty);
-			put_user(retval, (unsigned int *) arg);
-			return 0;
+			return put_user(retval, (unsigned int *) arg);
 		case TIOCGLCKTRMIOS:
-			retval = verify_area(VERIFY_WRITE, (void *) arg,
-					     sizeof (struct termios));
-			if (retval)
-				return retval;
-			kernel_termios_to_user_termios((struct termios *)arg,
+			return kernel_termios_to_user_termios
+				((struct termios *)arg,
 				 real_tty->termios_locked);
-			return 0;
 		case TIOCSLCKTRMIOS:
 			if (!suser())
 				return -EPERM;
-			retval = verify_area(VERIFY_READ, (void *) arg,
-					     sizeof (struct termios));
-			if (retval)
-				return retval;
-			user_termios_to_kernel_termios(real_tty->termios_locked,
+			return user_termios_to_kernel_termios
+				(real_tty->termios_locked,
 				 (struct termios *) arg);
-			return 0;
 		case TIOCPKT:
 			if (tty->driver.type != TTY_DRIVER_TYPE_PTY ||
 			    tty->driver.subtype != PTY_TYPE_MASTER)
 				return -ENOTTY;
-			retval = verify_area(VERIFY_READ, (void *) arg,
-					     sizeof (int));
+			retval = get_user(retval, (int *) arg);
 			if (retval)
 				return retval;
-			get_user(retval, (int *) arg);
 			if (retval) {
 				if (!tty->packet) {
 					tty->packet = 1;

drivers/net/ppp.c

@@ -358,6 +358,7 @@ ppp_first_time (void)
  */
 	(void) memset (&ppp_ldisc, 0, sizeof (ppp_ldisc));
 	ppp_ldisc.magic		= TTY_LDISC_MAGIC;
+	ppp_ldisc.name          = "ppp";
 	ppp_ldisc.open		= ppp_tty_open;
 	ppp_ldisc.close		= ppp_tty_close;
 	ppp_ldisc.read		= ppp_tty_read;

drivers/net/slip.c

@@ -1120,6 +1120,7 @@ int slip_init_ctrl_dev(struct device *dummy)
 	/* Fill in our line protocol discipline, and register it */
 	memset(&sl_ldisc, 0, sizeof(sl_ldisc));
 	sl_ldisc.magic  = TTY_LDISC_MAGIC;
+	sl_ldisc.name   = "slip";
 	sl_ldisc.flags  = 0;
 	sl_ldisc.open   = slip_open;
 	sl_ldisc.close  = slip_close;

drivers/pci/pci.c

@@ -917,12 +917,29 @@ static unsigned int scan_bus(struct pci_bus *bus, unsigned long *mem_startp)
 			pcibios_write_config_word(bus->number, devfn,
 						  PCI_STATUS, 0xffff);
 			/*
-			 * Configure the bus numbers for this bridge:
+			 * Read the existing primary/secondary/subordinate bus
+			 * number configuration to determine if the PCI bridge
+			 * has already been configured by the system.  If so,
+			 * do not modify the configuration, merely note it.
 			 */
 			pcibios_read_config_dword(bus->number, devfn, 0x18,
 						  &buses);
+			if ((buses & 0xFFFFFF) != 0)
+			  {
+			    child->primary = buses & 0xFF;
+			    child->secondary = (buses >> 8) & 0xFF;
+			    child->subordinate = (buses >> 16) & 0xFF;
+			    child->number = child->secondary;
+			    max = scan_bus(child, mem_startp);
+			  }
+			else
+			  {
+			    /*
+			     * Configure the bus numbers for this bridge:
+			     */
 			    buses &= 0xff000000;
-			buses |= (((unsigned int)(child->primary)     <<  0) |
+			    buses |=
+			      (((unsigned int)(child->primary)     <<  0) |
 			       ((unsigned int)(child->secondary)   <<  8) |
 			       ((unsigned int)(child->subordinate) << 16));
 			    pcibios_write_config_dword(bus->number, devfn, 0x18,
@@ -940,6 +957,7 @@ static unsigned int scan_bus(struct pci_bus *bus, unsigned long *mem_startp)
 			      | ((unsigned int)(child->subordinate) << 16);
 			    pcibios_write_config_dword(bus->number, devfn, 0x18,
 						       buses);
+			  }
 			pcibios_write_config_word(bus->number, devfn,
 						  PCI_COMMAND, cr);
 		}

drivers/scsi/AM53C974.c

@@ -684,6 +684,7 @@ AM53C974_write_8(CNTLREG1, CNTLREG1_DISR | instance->this_id);
 AM53C974_write_8(CMDREG, CMDREG_RBUS);     /* reset SCSI bus */
 udelay(10);
 AM53C974_config_after_reset(instance);
+udelay(500000);
 return(1);
 }
 

drivers/scsi/Config.in

@@ -26,6 +26,9 @@ dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI
 dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
 dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI
 dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
+if [ "$CONFIG_SCSI_BUSLOGIC" != "n" ]; then
+    bool '  Omit FlashPoint support' CONFIG_SCSI_OMIT_FLASHPOINT
+fi
 dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI
 dep_tristate 'EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) support' CONFIG_SCSI_EATA_DMA $CONFIG_SCSI
 dep_tristate 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO $CONFIG_SCSI

drivers/scsi/LICENSE.FlashPoint

+                     FlashPoint Driver Developer's Kit
+                                Version 1.0
+
+                   Copyright 1995-1996 by Mylex Corporation
+                            All Rights Reserved
+
+This program is free software; you may redistribute and/or modify it under
+the terms of either:
+
+    a) the GNU General Public License as published by the Free Software
+    Foundation; either version 2, or (at your option) any later version,
+
+    or
+
+    b) the "BSD-style License" included below.
+
+This program is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
+or FITNESS FOR A PARTICULAR PURPOSE.  See either the GNU General Public
+License or the BSD-style License below for more details.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+675 Mass Ave, Cambridge, MA 02139, USA.
+
+The BSD-style License is as follows:
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+1. Redistributions of source code must retain this LICENSE.FlashPoint
+   file, without modification, this list of conditions, and the following
+   disclaimer.  The following copyright notice must appear immediately at
+   the beginning of all source files:
+
+        Copyright 1995-1996 by Mylex Corporation.  All Rights Reserved
+
+        This file is available under both the GNU General Public License
+        and a BSD-style copyright; see LICENSE.FlashPoint for details.
+
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+3. The name of Mylex Corporation may not be used to endorse or promote
+   products derived from this software without specific prior written
+   permission.
+
+THIS SOFTWARE IS PROVIDED BY MYLEX CORP. ``AS IS'' AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.

drivers/scsi/Makefile

@@ -381,6 +381,12 @@ endif
 
 include $(TOPDIR)/Rules.make
 
+BusLogic.o: BusLogic.c FlashPoint.c
+	$(CC) $(CFLAGS) -c BusLogic.c -o BusLogic.O
+	$(CC) $(CFLAGS) -c FlashPoint.c -o FlashPoint.O
+	$(LD) -r -o BusLogic.o BusLogic.O FlashPoint.O
+	rm -f BusLogic.O FlashPoint.O
+
 aha152x.o: aha152x.c
 	$(CC) $(CFLAGS) $(AHA152X) -c aha152x.c 
 

drivers/scsi/README.FlashPoint

-The BusLogic FlashPoint SCSI host adapters are now supported on Linux 2.0.x.
-See http://www.dandelion.com/Linux/ for the beta test BusLogic driver which
-includes FlashPoint support.  The upgrade program described below will remain
-available through the end of 1996.
+The BusLogic FlashPoint SCSI Host Adapters are now supported on Linux.  The
+upgrade program described below will remain available through March 1997.
 
 
 

drivers/scsi/aha1542.c

@@ -13,6 +13,9 @@
  *        controller).
  *  Modified by Matti Aarnio
  *        Accept parameters from LILO cmd-line. -- 1-Oct-94
+ *  Modified by Mike McLagan <mike.mclagan@linux.org>
+ *        Recognise extended mode on AHA1542CP, different bit than 1542CF
+ *        1-Jan-97
  */
 
 #include <linux/module.h>
@@ -813,7 +816,9 @@ static int aha1542_mbenable(int base)
      mbenable_cmd[0]=CMD_MBENABLE;
      mbenable_cmd[1]=0;
      mbenable_cmd[2]=mbenable_result[1];
-     if(mbenable_result[1] & 1) retval = BIOS_TRANSLATION_25563;
+
+     if(mbenable_result[1] & 0x03) retval = BIOS_TRANSLATION_25563;
+
      aha1542_out(base,mbenable_cmd,3);
      WAIT(INTRFLAGS(base),INTRMASK,HACC,0);
   };

drivers/scsi/scsi_ioctl.c

@@ -247,8 +247,12 @@ static int ioctl_command(Scsi_Device *dev, Scsi_Ioctl_Command *sic)
 	retries = 1;
 	break;
       case START_STOP:
+	timeout =  2 * 60 * HZ;	/* 2 minutes */
+	retries = 1;
+	break;
       case MOVE_MEDIUM:
-	timeout =  60 * HZ;	/* 60 seconds */
+      case READ_ELEMENT_STATUS:
+	timeout =  5 * 60 * HZ;	/* 5 minutes */
 	retries = 1;
 	break;
       default:

drivers/scsi/sd.c

@@ -1210,6 +1210,7 @@ static int sd_init_onedisk(int i)
 		printk ("scsi : deleting disk entry.\n");
 		rscsi_disks[i].device = NULL;
 		sd_template.nr_dev--;
+		sd_gendisk.nr_real--;
 		return i;
 	    }
 	}

drivers/scsi/st.c

@@ -629,7 +629,6 @@ scsi_tape_open(struct inode * inode, struct file * filp)
     if ((STp->buffer)->last_result_fatal != 0) {
       if ((SCpnt->sense_buffer[0] & 0x70) == 0x70 &&
 	  (SCpnt->sense_buffer[2] & 0x0f) == NO_TAPE) {
-	printk(KERN_NOTICE "st%d: No tape.\n", dev);
 	STp->ready = ST_NO_TAPE;
       } else
 	STp->ready = ST_NOT_READY;

fs/proc/Makefile

@@ -8,7 +8,8 @@
 # Note 2! The CFLAGS definitions are now in the main makefile...
 
 O_TARGET := proc.o
-O_OBJS   := inode.o root.o base.o mem.o link.o fd.o array.o kmsg.o net.o scsi.o
+O_OBJS   := inode.o root.o base.o generic.o mem.o link.o fd.o array.o \
+		kmsg.o net.o scsi.o proc_tty.o
 OX_OBJS  := procfs_syms.o
 M_OBJS   := 
 

fs/proc/generic.c

+/*
+ * proc/fs/generic.c --- generic routines for the proc-fs
+ *
+ * This file contains generic proc-fs routines for handling
+ * directories and files.
+ * 
+ * Copyright (C) 1991, 1992 Linus Torvalds.
+ * Copyright (C) 1997 Theodore Ts'o
+ */
+
+#include <asm/uaccess.h>
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/config.h>
+#include <asm/bitops.h>
+
+static long proc_file_read(struct inode * inode, struct file * file,
+			   char * buf, unsigned long nbytes);
+static long proc_file_write(struct inode * inode, struct file * file,
+			    const char * buffer, unsigned long count);
+static long long proc_file_lseek(struct inode * inode, struct file * file, 
+				 long long offset, int orig);
+
+static struct file_operations proc_file_operations = {
+    proc_file_lseek,	/* lseek   */
+    proc_file_read,	/* read	   */
+    proc_file_write,	/* write   */
+    NULL,		/* readdir */
+    NULL,		/* poll    */
+    NULL,		/* ioctl   */
+    NULL,		/* mmap	   */
+    NULL,		/* no special open code	   */
+    NULL,		/* no special release code */
+    NULL		/* can't fsync */
+};
+
+/*
+ * proc files can do almost nothing..
+ */
+struct inode_operations proc_file_inode_operations = {
+    &proc_file_operations,  /* default scsi directory file-ops */
+    NULL,	    /* create	   */
+    NULL,	    /* lookup	   */
+    NULL,	    /* link	   */
+    NULL,	    /* unlink	   */
+    NULL,	    /* symlink	   */
+    NULL,	    /* mkdir	   */
+    NULL,	    /* rmdir	   */
+    NULL,	    /* mknod	   */
+    NULL,	    /* rename	   */
+    NULL,	    /* readlink	   */
+    NULL,	    /* follow_link */
+    NULL,	    /* readpage	   */
+    NULL,	    /* writepage   */
+    NULL,	    /* bmap	   */
+    NULL,	    /* truncate	   */
+    NULL	    /* permission  */
+};
+
+#ifndef MIN
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+
+/* 4K page size but our output routines use some slack for overruns */
+#define PROC_BLOCK_SIZE	(3*1024)
+
+static long proc_file_read(struct inode * inode, struct file * file,
+			   char * buf, unsigned long nbytes)
+{
+	char 	*page;
+	int	retval=0;
+	int	n;
+	char	*start;
+	struct proc_dir_entry * dp;
+
+	if (nbytes < 0)
+		return -EINVAL;
+	dp = (struct proc_dir_entry *) inode->u.generic_ip;
+	if (!(page = (char*) __get_free_page(GFP_KERNEL)))
+		return -ENOMEM;
+
+	while (nbytes > 0)
+	{
+		n = MIN(PROC_BLOCK_SIZE, nbytes);
+
+		if (dp->get_info) {
+			/*
+			 * Handle backwards compatibility with the old net
+			 * routines.
+			 * 
+			 * XXX What gives with the file->f_flags & O_ACCMODE
+			 * test?  Seems stupid to me....
+			 */
+			n = dp->get_info(page, &start, file->f_pos, n,
+				 (file->f_flags & O_ACCMODE) == O_RDWR);
+		} else if (dp->read_proc) {
+			n = dp->read_proc(page, &start, file->f_pos,
+					  n, dp->data);
+		} else
+			break;
+			
+		if (n == 0)
+			break;	/* End of file */
+		if (n < 0) {
+			if (retval == 0)
+				retval = n;
+			break;
+		}
+		
+		n -= copy_to_user(buf, start, n);
+		if (n == 0) {
+			if (retval == 0)
+				retval = -EFAULT;
+			break;
+		}
+		
+		file->f_pos += n;	/* Move down the file */
+		nbytes -= n;
+		buf += n;
+		retval += n;
+	}
+	free_page((unsigned long) page);
+	return retval;
+}
+
+static long
+proc_file_write(struct inode * inode, struct file * file,
+		const char * buffer, unsigned long count)
+{
+	struct proc_dir_entry * dp;
+	char 	*page;
+	
+	if (count < 0)
+		return -EINVAL;
+	dp = (struct proc_dir_entry *) inode->u.generic_ip;
+	if (!(page = (char*) __get_free_page(GFP_KERNEL)))
+		return -ENOMEM;
+
+	if (!dp->write_proc)
+		return -EIO;
+
+	return dp->write_proc(file, buffer, count, dp->data);
+}
+
+
+
+static long long proc_file_lseek(struct inode * inode, struct file * file, 
+				 long long offset, int orig)
+{
+    switch (orig) {
+    case 0:
+	file->f_pos = offset;
+	return(file->f_pos);
+    case 1:
+	file->f_pos += offset;
+	return(file->f_pos);
+    case 2:
+	return(-EINVAL);
+    default:
+	return(-EINVAL);
+    }
+}
+
+struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
+					 struct proc_dir_entry *parent)
+{
+	struct proc_dir_entry *ent;
+
+	ent = kmalloc(sizeof(struct proc_dir_entry), GFP_KERNEL);
+	if (!ent)
+		return NULL;
+	memset(ent, 0, sizeof(struct proc_dir_entry));
+
+	if (mode == S_IFDIR)
+		mode |= S_IRUGO | S_IXUGO;
+	else if (mode == 0)
+		mode = S_IFREG | S_IRUGO;
+	
+	ent->name = name;
+	ent->namelen = strlen(ent->name);
+	ent->mode = mode;
+	if (S_ISDIR(mode)) 
+		ent->nlink = 2;
+	else
+		ent->nlink = 1;
+
+	if (parent)
+		proc_register(parent, ent);
+	
+	return ent;
+}
+

fs/proc/inode.c

@@ -81,6 +81,7 @@ static int parse_options(char *options,uid_t *uid,gid_t *gid)
 struct inode * proc_get_inode(struct super_block * s, int ino, struct proc_dir_entry * de)
 {
 	struct inode * inode = iget(s, ino);
+	struct task_struct *p;
 	
 #ifdef CONFIG_SUN_OPENPROMFS_MODULE
 	if ((inode->i_ino >= PROC_OPENPROM_FIRST)
@@ -106,6 +107,14 @@ struct inode * proc_get_inode(struct super_block * s, int ino, struct proc_dir_e
 				de->fill_inode(inode);
 		}
 	}
+	/*
+	 * Fixup the root inode's nlink value
+	 */
+	if (inode->i_ino == PROC_ROOT_INO) {
+		for_each_task(p)
+			if (p && p->pid)
+				inode->i_nlink++;
+	}
 	return inode;
 }			
 
@@ -162,93 +171,20 @@ void proc_read_inode(struct inode * inode)
 	inode->i_nlink = 1;
 	inode->i_size = 0;
 	pid = ino >> 16;
+	if (!pid)
+		return;
 	p = task[0];
 	for (i = 0; i < NR_TASKS ; i++)
 		if ((p = task[i]) && (p->pid == pid))
 			break;
 	if (!p || i >= NR_TASKS)
 		return;
-	if (ino == PROC_ROOT_INO) {
-		inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
-		inode->i_nlink = 2;
-		for (i = 1 ; i < NR_TASKS ; i++)
-			if (task[i])
-				inode->i_nlink++;
-		return;
-	}
 
-	if (!pid) {
-		switch (ino) {
-			case PROC_KMSG:
-				inode->i_mode = S_IFREG | S_IRUSR;
-				inode->i_op = &proc_kmsg_inode_operations;
-				break;
-			case PROC_NET:
-				inode->i_nlink = 2;
-				break;
-			case PROC_SCSI:
-                                inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
-                                inode->i_nlink = 2;
-                                inode->i_op = &proc_scsi_inode_operations;
-                                break;
-			case PROC_KCORE:
-				inode->i_mode = S_IFREG | S_IRUSR;
-				inode->i_op = &proc_kcore_inode_operations;
-				inode->i_size = (MAP_NR(high_memory) << PAGE_SHIFT) + PAGE_SIZE;
-				break;
-			case PROC_PROFILE:
-				inode->i_mode = S_IFREG | S_IRUGO | S_IWUSR;
-				inode->i_op = &proc_profile_inode_operations;
-				inode->i_size = (1+prof_len) * sizeof(unsigned long);
-				break;
-			default:
-				inode->i_mode = S_IFREG | S_IRUGO;
-				inode->i_op = &proc_array_inode_operations;
-				break;
-		}
-		return;
-	}
 	ino &= 0x0000ffff;
 	if (ino == PROC_PID_INO || p->dumpable) {
 		inode->i_uid = p->euid;
 		inode->i_gid = p->egid;
 	}
-	switch (ino) {
-		case PROC_PID_INO:
-			inode->i_nlink = 4;
-			return;
-		case PROC_PID_MEM:
-			inode->i_op = &proc_mem_inode_operations;
-			inode->i_mode = S_IFREG | S_IRUSR | S_IWUSR;
-			return;
-		case PROC_PID_CWD:
-		case PROC_PID_ROOT:
-		case PROC_PID_EXE:
-			inode->i_op = &proc_link_inode_operations;
-			inode->i_size = 64;
-			inode->i_mode = S_IFLNK | S_IRWXU;
-			return;
-		case PROC_PID_FD:
-			inode->i_mode = S_IFDIR | S_IRUSR | S_IXUSR;
-			inode->i_op = &proc_fd_inode_operations;
-			inode->i_nlink = 2;
-			return;
-		case PROC_PID_ENVIRON:
-			inode->i_mode = S_IFREG | S_IRUSR;
-			inode->i_op = &proc_array_inode_operations;
-			return;
-		case PROC_PID_CMDLINE:
-		case PROC_PID_STATUS:
-		case PROC_PID_STAT:
-		case PROC_PID_STATM:
-			inode->i_mode = S_IFREG | S_IRUGO;
-			inode->i_op = &proc_array_inode_operations;
-			return;
-		case PROC_PID_MAPS:
-			inode->i_mode = S_IFIFO | S_IRUGO;
-			inode->i_op = &proc_arraylong_inode_operations;
-			return;
-	}
 	switch (ino >> 8) {
 		case PROC_PID_FD_DIR:
 			ino &= 0xff;

fs/proc/proc_tty.c

+/*
+ * proc_tty.c -- handles /proc/tty
+ *
+ * Copyright 1997, Theodore Ts'o
+ */
+
+#include <asm/uaccess.h>
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/tty.h>
+#include <linux/config.h>
+#include <asm/bitops.h>
+
+extern struct tty_driver *tty_drivers;	/* linked list of tty drivers */
+extern struct tty_ldisc ldiscs[];
+
+
+static int tty_drivers_read_proc(char *page, char **start, off_t off,
+				 int count, void *data);
+static int tty_ldiscs_read_proc(char *page, char **start, off_t off,
+				int count, void *data);
+
+/*
+ * The /proc/tty directory inodes...
+ */
+static struct proc_dir_entry *proc_tty, *proc_tty_ldisc, *proc_tty_driver;
+
+/*
+ * This is the handler for /proc/tty/drivers
+ */
+static int tty_drivers_read_proc(char *page, char **start, off_t off,
+				 int count, void *data)
+{
+	int	len = 0;
+	off_t	begin = 0;
+	struct tty_driver *p;
+	char	range[20], deftype[20];
+	char	*type;
+
+	for (p = tty_drivers; p; p = p->next) {
+		if (p->num > 1)
+			sprintf(range, "%d-%d", p->minor_start,
+				p->minor_start + p->num - 1);
+		else
+			sprintf(range, "%d", p->minor_start);
+		switch (p->type) {
+		case TTY_DRIVER_TYPE_SYSTEM:
+			if (p->subtype == SYSTEM_TYPE_TTY)
+				type = "system:/dev/tty";
+			else if (p->subtype == SYSTEM_TYPE_CONSOLE)
+				type = "system:console";
+			else
+				type = "system";
+			break;
+		case TTY_DRIVER_TYPE_CONSOLE:
+			type = "console";
+			break;
+		case TTY_DRIVER_TYPE_SERIAL:
+			if (p->subtype == 2)
+				type = "serial:callout";
+			else
+				type = "serial";
+			break;
+		case TTY_DRIVER_TYPE_PTY:
+			if (p->subtype == PTY_TYPE_MASTER)
+				type = "pty:master";
+			else if (p->subtype == PTY_TYPE_SLAVE)
+				type = "pty:slave";
+			else
+				type = "pty";
+			break;
+		default:
+			sprintf(deftype, "type:%d.%d", p->type, p->subtype);
+			type = deftype;
+			break;
+		}
+		len += sprintf(page+len, "%-20s /dev/%-8s %3d %7s %s\n",
+			       p->driver_name ? p->driver_name : "",
+			       p->name, p->major, range, type);
+		if (len+begin > off+count)
+			break;
+		if (len+begin < off) {
+			begin += len;
+			len = 0;
+		}
+	}
+	if (off >= len+begin)
+		return 0;
+	*start = page + (begin-off);
+	return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * This is the handler for /proc/tty/ldiscs
+ */
+static int tty_ldiscs_read_proc(char *page, char **start, off_t off,
+				int count, void *data)
+{
+	int	i;
+	int	len = 0;
+	off_t	begin = 0;
+
+	for (i=0; i < NR_LDISCS; i++) {
+		if (!(ldiscs[i].flags & LDISC_FLAG_DEFINED))
+			continue;
+		len += sprintf(page+len, "%-10s %2d\n",
+			       ldiscs[i].name ? ldiscs[i].name : "???", i);
+		if (len+begin > off+count)
+			break;
+		if (len+begin < off) {
+			begin += len;
+			len = 0;
+		}
+	}
+	if (off >= len+begin)
+		return 0;
+	*start = page + (begin-off);
+	return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * Thsi function is called by register_tty_driver() to handle
+ * registering the driver's /proc handler into /proc/tty/driver/<foo>
+ */
+void proc_tty_register_driver(struct tty_driver *driver)
+{
+	struct proc_dir_entry *ent;
+		
+	if ((!driver->read_proc && !driver->write_proc) ||
+	    !driver->driver_name ||
+	    driver->proc_entry)
+		return;
+
+	ent = create_proc_entry(driver->driver_name, 0, proc_tty_driver);
+	if (!ent)
+		return;
+	ent->read_proc = driver->read_proc;
+	ent->write_proc = driver->write_proc;
+	ent->data = driver;
+
+	driver->proc_entry = ent;
+}
+
+/*
+ * This function is called by unregister_tty_driver()
+ */
+void proc_tty_unregister_driver(struct tty_driver *driver)
+{
+	struct proc_dir_entry *ent;
+
+	ent = driver->proc_entry;
+	if (!ent)
+		return;
+		
+	proc_unregister(proc_tty_driver, ent->low_ino);
+	
+	driver->proc_entry = 0;
+	kfree(ent);
+}
+
+/*
+ * Called by proc_root_init() to initialize the /proc/tty subtree
+ */
+void proc_tty_init(void)
+{
+	struct proc_dir_entry *ent;
+	
+	proc_tty = create_proc_entry("tty", S_IFDIR, &proc_root);
+	if (!proc_tty)
+		return;
+	proc_tty_ldisc = create_proc_entry("ldisc", S_IFDIR, proc_tty);
+	proc_tty_driver = create_proc_entry("driver", S_IFDIR, proc_tty);
+
+	ent = create_proc_entry("ldiscs", 0, proc_tty);
+	ent->read_proc = tty_ldiscs_read_proc;
+
+	ent = create_proc_entry("drivers", 0, proc_tty);
+	ent->read_proc = tty_drivers_read_proc;
+}
+

include/asm-alpha/checksum.h

@@ -53,7 +53,7 @@ unsigned int csum_partial_copy(const char *src, char *dst, int len, unsigned int
  * this is a new version of the above that records errors it finds in *errp,
  * but continues and zeros the rest of the buffer.
  */
-unsigned int csum_partial_copy_from_user(int *errp, char *src, char *dst, int len, unsigned int sum);
+unsigned int csum_partial_copy_from_user(char *src, char *dst, int len, unsigned int sum, int *errp);
 
 /*
  * this routine is used for miscellaneous IP-like checksums, mainly

include/asm-i386/termbits.h

@@ -122,6 +122,7 @@ struct termios {
 #define  B230400 0010003
 #define  B460800 0010004
 #define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
 /* c_lflag bits */

include/asm-i386/termios.h

@@ -33,6 +33,8 @@ struct termio {
 #define TIOCM_DSR	0x100
 #define TIOCM_CD	TIOCM_CAR
 #define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 

include/linux/proc_fs.h

@@ -223,6 +223,10 @@ struct proc_dir_entry {
 	void (*fill_inode)(struct inode *);
 	struct proc_dir_entry *next, *parent, *subdir;
 	void *data;
+	int (*read_proc)(char *page, char **start, off_t off,
+			 int count, void *data);
+	int (*write_proc)(struct file *file, const char *buffer,
+			  unsigned long count, void *data);
 };
 
 extern int (* dispatch_scsi_info_ptr) (int ino, char *buffer, char **start,
@@ -327,6 +331,7 @@ extern int proc_openprom_regdev(struct openpromfs_dev *);
 extern int proc_openprom_unregdev(struct openpromfs_dev *);
   
 extern struct inode_operations proc_dir_inode_operations;
+extern struct inode_operations proc_file_inode_operations;
 extern struct inode_operations proc_net_inode_operations;
 extern struct inode_operations proc_netdir_inode_operations;
 extern struct inode_operations proc_scsi_inode_operations;
@@ -344,3 +349,16 @@ extern struct inode_operations proc_fd_inode_operations;
 extern struct inode_operations proc_ringbuf_inode_operations;
 #endif
 #endif
+
+/*
+ * generic.c
+ */
+struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
+					 struct proc_dir_entry *parent);
+
+/*
+ * proc_tty.c
+ */
+extern void proc_tty_init(void);
+extern void proc_tty_register_driver(struct tty_driver *driver);
+extern void proc_tty_unregister_driver(struct tty_driver *driver);

include/linux/serial.h

@@ -123,7 +123,10 @@ struct serial_multiport_struct {
  */
 struct serial_icounter_struct {
 	int cts, dsr, rng, dcd;
-	int reserved[16];
+	int rx, tx;
+	int frame, overrun, parity, brk;
+	int buf_overrun;
+	int reserved[9];
 };
 
 
@@ -144,7 +147,9 @@ struct serial_icounter_struct {
  * Counters of the input lines (CTS, DSR, RI, CD) interrupts
  */
 struct async_icount {
-	__u32	cts, dsr, rng, dcd;	
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
 };
 
 struct serial_state {
@@ -178,6 +183,7 @@ struct async_struct {
 	int			read_status_mask;
 	int			ignore_status_mask;
 	int			timeout;
+	int			quot;
 	int			x_char;	/* xon/xoff character */
 	int			close_delay;
 	unsigned short		closing_wait;
@@ -235,5 +241,6 @@ struct rs_multiport_struct {
 /* Export to allow PCMCIA to use this - Dave Hinds */
 extern int register_serial(struct serial_struct *req);
 extern void unregister_serial(int line);
+
 #endif /* __KERNEL__ */
 #endif /* _LINUX_SERIAL_H */

include/linux/tty.h

@@ -328,13 +328,8 @@ extern struct tty_ldisc tty_ldisc_N_TTY;
 extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
 		       unsigned int cmd, unsigned long arg);
 
-/* serial.c */
+/* pcxx.c */
 
-extern int  rs_open(struct tty_struct * tty, struct file * filp);
-
-/* pty.c */
-
-extern int  pty_open(struct tty_struct * tty, struct file * filp);
 extern int pcxe_open(struct tty_struct *tty, struct file *filp);
 
 /* console.c */

include/linux/tty_driver.h

@@ -107,6 +107,7 @@
 
 struct tty_driver {
 	int	magic;		/* magic number for this structure */
+	const char	*driver_name;
 	const char	*name;
 	int	name_base;	/* offset of printed name */
 	short	major;		/* major device number */
@@ -117,6 +118,7 @@ struct tty_driver {
 	struct termios init_termios; /* Initial termios */
 	int	flags;		/* tty driver flags */
 	int	*refcount;	/* for loadable tty drivers */
+	struct proc_dir_entry *proc_entry; /* /proc fs entry */
 	struct tty_driver *other; /* only used for the PTY driver */
 
 	/*
@@ -150,6 +152,10 @@ struct tty_driver {
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
 	void (*send_xchar)(struct tty_struct *tty, char ch);
+	int (*read_proc)(char *page, char **start, off_t off,
+			  int count, void *data);
+	int (*write_proc)(struct file *file, const char *buffer,
+			  unsigned long count, void *data);
 
 	/*
 	 * linked list pointers
@@ -197,4 +203,8 @@ struct tty_driver {
 #define PTY_TYPE_MASTER			0x0001
 #define PTY_TYPE_SLAVE			0x0002
 
+/* serial subtype definitions */
+#define SERIAL_TYPE_NORMAL	1
+#define SERIAL_TYPE_CALLOUT	2
+
 #endif /* #ifdef _LINUX_TTY_DRIVER_H */

include/linux/tty_ldisc.h

@@ -102,6 +102,7 @@
 
 struct tty_ldisc {
 	int	magic;
+	char	*name;
 	int	num;
 	int	flags;
 	/*