Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc',...

Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', 'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release

add acpidump utility
intel_idle driver now supports IVB Xeon
turbostat can now count SMIs
ACPI can now bind to USB3 hubs
misc fixes

Documentation/ABI/testing/sysfs-devices-firmware_node

+What:		/sys/devices/.../firmware_node/
+Date:		September 2012
+Contact:	<>
+Description:
+		The /sys/devices/.../firmware_node directory contains attributes
+		allowing the user space to check and modify some firmware
+		related properties of given device.
+
+What:		/sys/devices/.../firmware_node/description
+Date:		September 2012
+Contact:	Lance Ortiz <lance.ortiz@hp.com>
+Description:
+		The /sys/devices/.../firmware/description attribute contains a string
+		that describes the device as provided by the _STR method in the ACPI
+		namespace.  This attribute is read-only.  If the device does not have
+		an _STR method associated with it in the ACPI namespace, this
+		attribute is not present.

drivers/acpi/acpica/Makefile

@@ -158,5 +158,6 @@ acpi-y +=		\
 	utresrc.o	\
 	utstate.o	\
 	utxface.o	\
+	utxfinit.o	\
 	utxferror.o	\
 	utxfmutex.o

drivers/acpi/acpica/achware.h

@@ -110,8 +110,7 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width);
 /*
  * hwgpe - GPE support
  */
-u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
-			     struct acpi_gpe_register_info *gpe_register_info);
+u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info);
 
 acpi_status
 acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action);

drivers/acpi/acpica/aclocal.h

@@ -707,15 +707,18 @@ union acpi_parse_value {
 	u8                              disasm_opcode;  /* Subtype used for disassembly */\
 	char                            aml_op_name[16])	/* Op name (debug only) */
 
-#define ACPI_DASM_BUFFER                0x00
-#define ACPI_DASM_RESOURCE              0x01
-#define ACPI_DASM_STRING                0x02
-#define ACPI_DASM_UNICODE               0x03
-#define ACPI_DASM_EISAID                0x04
-#define ACPI_DASM_MATCHOP               0x05
-#define ACPI_DASM_LNOT_PREFIX           0x06
-#define ACPI_DASM_LNOT_SUFFIX           0x07
-#define ACPI_DASM_IGNORE                0x08
+/* Flags for disasm_flags field above */
+
+#define ACPI_DASM_BUFFER                0x00	/* Buffer is a simple data buffer */
+#define ACPI_DASM_RESOURCE              0x01	/* Buffer is a Resource Descriptor */
+#define ACPI_DASM_STRING                0x02	/* Buffer is a ASCII string */
+#define ACPI_DASM_UNICODE               0x03	/* Buffer is a Unicode string */
+#define ACPI_DASM_PLD_METHOD            0x04	/* Buffer is a _PLD method bit-packed buffer */
+#define ACPI_DASM_EISAID                0x05	/* Integer is an EISAID */
+#define ACPI_DASM_MATCHOP               0x06	/* Parent opcode is a Match() operator */
+#define ACPI_DASM_LNOT_PREFIX           0x07	/* Start of a Lnot_equal (etc.) pair of opcodes */
+#define ACPI_DASM_LNOT_SUFFIX           0x08	/* End  of a Lnot_equal (etc.) pair of opcodes */
+#define ACPI_DASM_IGNORE                0x09	/* Not used at this time */
 
 /*
  * Generic operation (for example:  If, While, Store)
@@ -932,6 +935,7 @@ struct acpi_bit_register_info {
 #define ACPI_OSI_WIN_VISTA_SP1          0x09
 #define ACPI_OSI_WIN_VISTA_SP2          0x0A
 #define ACPI_OSI_WIN_7                  0x0B
+#define ACPI_OSI_WIN_8                  0x0C
 
 #define ACPI_ALWAYS_ILLEGAL             0x00
 
@@ -1024,6 +1028,7 @@ struct acpi_port_info {
  ****************************************************************************/
 
 struct acpi_db_method_info {
+	acpi_handle method;
 	acpi_handle main_thread_gate;
 	acpi_handle thread_complete_gate;
 	acpi_thread_id *threads;

drivers/acpi/acpica/acmacros.h

@@ -277,10 +277,33 @@
 
 /* Bitfields within ACPI registers */
 
-#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
-#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
+#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) \
+	((val << pos) & mask)
 
-#define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))
+#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) \
+	reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
+
+#define ACPI_INSERT_BITS(target, mask, source) \
+	target = ((target & (~(mask))) | (source & mask))
+
+/* Generic bitfield macros and masks */
+
+#define ACPI_GET_BITS(source_ptr, position, mask) \
+	((*source_ptr >> position) & mask)
+
+#define ACPI_SET_BITS(target_ptr, position, mask, value) \
+	(*target_ptr |= ((value & mask) << position))
+
+#define ACPI_1BIT_MASK      0x00000001
+#define ACPI_2BIT_MASK      0x00000003
+#define ACPI_3BIT_MASK      0x00000007
+#define ACPI_4BIT_MASK      0x0000000F
+#define ACPI_5BIT_MASK      0x0000001F
+#define ACPI_6BIT_MASK      0x0000003F
+#define ACPI_7BIT_MASK      0x0000007F
+#define ACPI_8BIT_MASK      0x000000FF
+#define ACPI_16BIT_MASK     0x0000FFFF
+#define ACPI_24BIT_MASK     0x00FFFFFF
 
 /*
  * An object of type struct acpi_namespace_node can appear in some contexts

drivers/acpi/acpica/dswload.c

@@ -230,6 +230,20 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
 			break;
 
+		case ACPI_TYPE_METHOD:
+
+			/*
+			 * Allow scope change to root during execution of module-level
+			 * code. Root is typed METHOD during this time.
+			 */
+			if ((node == acpi_gbl_root_node) &&
+			    (walk_state->
+			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+				break;
+			}
+
+			/*lint -fallthrough */
+
 		default:
 
 			/* All other types are an error */

drivers/acpi/acpica/dswload2.c

@@ -230,6 +230,20 @@ acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
 			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
 			break;
 
+		case ACPI_TYPE_METHOD:
+
+			/*
+			 * Allow scope change to root during execution of module-level
+			 * code. Root is typed METHOD during this time.
+			 */
+			if ((node == acpi_gbl_root_node) &&
+			    (walk_state->
+			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+				break;
+			}
+
+			/*lint -fallthrough */
+
 		default:
 
 			/* All other types are an error */

drivers/acpi/acpica/evgpe.c

@@ -80,8 +80,7 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
-						gpe_register_info);
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 
 	/* Clear the run bit up front */
 
@@ -379,6 +378,18 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
 			 */
 			if (!(gpe_register_info->enable_for_run |
 			      gpe_register_info->enable_for_wake)) {
+				ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
+						  "Ignore disabled registers for GPE%02X-GPE%02X: "
+						  "RunEnable=%02X, WakeEnable=%02X\n",
+						  gpe_register_info->
+						  base_gpe_number,
+						  gpe_register_info->
+						  base_gpe_number +
+						  (ACPI_GPE_REGISTER_WIDTH - 1),
+						  gpe_register_info->
+						  enable_for_run,
+						  gpe_register_info->
+						  enable_for_wake));
 				continue;
 			}
 
@@ -401,9 +412,14 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
 			}
 
 			ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
-					  "Read GPE Register at GPE%02X: Status=%02X, Enable=%02X\n",
+					  "Read registers for GPE%02X-GPE%02X: Status=%02X, Enable=%02X, "
+					  "RunEnable=%02X, WakeEnable=%02X\n",
 					  gpe_register_info->base_gpe_number,
-					  status_reg, enable_reg));
+					  gpe_register_info->base_gpe_number +
+					  (ACPI_GPE_REGISTER_WIDTH - 1),
+					  status_reg, enable_reg,
+					  gpe_register_info->enable_for_run,
+					  gpe_register_info->enable_for_wake));
 
 			/* Check if there is anything active at all in this register */
 

drivers/acpi/acpica/evxfgpe.c

@@ -357,8 +357,7 @@ acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 ac
 		goto unlock_and_exit;
 	}
 
-	register_bit =
-	    acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info);
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 
 	/* Perform the action */
 

drivers/acpi/acpica/hwgpe.c

@@ -60,7 +60,6 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
  * FUNCTION:	acpi_hw_get_gpe_register_bit
  *
  * PARAMETERS:	gpe_event_info	    - Info block for the GPE
- *		gpe_register_info   - Info block for the GPE register
  *
  * RETURN:	Register mask with a one in the GPE bit position
  *
@@ -69,11 +68,10 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
  *
  ******************************************************************************/
 
-u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
-			     struct acpi_gpe_register_info *gpe_register_info)
+u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info)
 {
 	return (u32)1 << (gpe_event_info->gpe_number -
-				gpe_register_info->base_gpe_number);
+		 gpe_event_info->register_info->base_gpe_number);
 }
 
 /******************************************************************************
@@ -115,8 +113,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
 
 	/* Set or clear just the bit that corresponds to this GPE */
 
-	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
-						gpe_register_info);
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 	switch (action) {
 	case ACPI_GPE_CONDITIONAL_ENABLE:
 
@@ -178,8 +175,7 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 	 * Write a one to the appropriate bit in the status register to
 	 * clear this GPE.
 	 */
-	register_bit =
-	    acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info);
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 
 	status = acpi_hw_write(register_bit,
 			       &gpe_register_info->status_address);
@@ -222,8 +218,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 
 	/* Get the register bitmask for this GPE */
 
-	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
-						gpe_register_info);
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 
 	/* GPE currently enabled? (enabled for runtime?) */
 

drivers/acpi/acpica/hwxfsleep.c

@@ -381,7 +381,6 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
  * FUNCTION:    acpi_leave_sleep_state_prep
  *
  * PARAMETERS:  sleep_state         - Which sleep state we are exiting
- *              flags               - ACPI_EXECUTE_BFS to run optional method
  *
  * RETURN:      Status
  *

drivers/acpi/acpica/nsdump.c

@@ -264,7 +264,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
 		switch (type) {
 		case ACPI_TYPE_PROCESSOR:
 
-			acpi_os_printf("ID %X Len %.4X Addr %p\n",
+			acpi_os_printf("ID %02X Len %02X Addr %p\n",
 				       obj_desc->processor.proc_id,
 				       obj_desc->processor.length,
 				       ACPI_CAST_PTR(void,

drivers/acpi/acpica/tbinstal.c

@@ -350,6 +350,7 @@ struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header
 acpi_status acpi_tb_resize_root_table_list(void)
 {
 	struct acpi_table_desc *tables;
+	u32 table_count;
 
 	ACPI_FUNCTION_TRACE(tb_resize_root_table_list);
 
@@ -363,8 +364,13 @@ acpi_status acpi_tb_resize_root_table_list(void)
 
 	/* Increase the Table Array size */
 
-	tables = ACPI_ALLOCATE_ZEROED(((acpi_size) acpi_gbl_root_table_list.
-				       max_table_count +
+	if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) {
+		table_count = acpi_gbl_root_table_list.max_table_count;
+	} else {
+		table_count = acpi_gbl_root_table_list.current_table_count;
+	}
+
+	tables = ACPI_ALLOCATE_ZEROED(((acpi_size) table_count +
 				       ACPI_ROOT_TABLE_SIZE_INCREMENT) *
 				      sizeof(struct acpi_table_desc));
 	if (!tables) {
@@ -377,8 +383,8 @@ acpi_status acpi_tb_resize_root_table_list(void)
 
 	if (acpi_gbl_root_table_list.tables) {
 		ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables,
-			    (acpi_size) acpi_gbl_root_table_list.
-			    max_table_count * sizeof(struct acpi_table_desc));
+			    (acpi_size) table_count *
+			    sizeof(struct acpi_table_desc));
 
 		if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) {
 			ACPI_FREE(acpi_gbl_root_table_list.tables);
@@ -386,9 +392,9 @@ acpi_status acpi_tb_resize_root_table_list(void)
 	}
 
 	acpi_gbl_root_table_list.tables = tables;
-	acpi_gbl_root_table_list.max_table_count +=
-	    ACPI_ROOT_TABLE_SIZE_INCREMENT;
-	acpi_gbl_root_table_list.flags |= (u8)ACPI_ROOT_ORIGIN_ALLOCATED;
+	acpi_gbl_root_table_list.max_table_count =
+	    table_count + ACPI_ROOT_TABLE_SIZE_INCREMENT;
+	acpi_gbl_root_table_list.flags |= ACPI_ROOT_ORIGIN_ALLOCATED;
 
 	return_ACPI_STATUS(AE_OK);
 }

drivers/acpi/acpica/tbxface.c

@@ -159,14 +159,12 @@ acpi_initialize_tables(struct acpi_table_desc * initial_table_array,
  * DESCRIPTION: Reallocate Root Table List into dynamic memory. Copies the
  *              root list from the previously provided scratch area. Should
  *              be called once dynamic memory allocation is available in the
- *              kernel
+ *              kernel.
  *
  ******************************************************************************/
 acpi_status acpi_reallocate_root_table(void)
 {
-	struct acpi_table_desc *tables;
-	acpi_size new_size;
-	acpi_size current_size;
+	acpi_status status;
 
 	ACPI_FUNCTION_TRACE(acpi_reallocate_root_table);
 
@@ -178,39 +176,10 @@ acpi_status acpi_reallocate_root_table(void)
 		return_ACPI_STATUS(AE_SUPPORT);
 	}
 
-	/*
-	 * Get the current size of the root table and add the default
-	 * increment to create the new table size.
-	 */
-	current_size = (acpi_size)
-	    acpi_gbl_root_table_list.current_table_count *
-	    sizeof(struct acpi_table_desc);
-
-	new_size = current_size +
-	    (ACPI_ROOT_TABLE_SIZE_INCREMENT * sizeof(struct acpi_table_desc));
-
-	/* Create new array and copy the old array */
-
-	tables = ACPI_ALLOCATE_ZEROED(new_size);
-	if (!tables) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
+	acpi_gbl_root_table_list.flags |= ACPI_ROOT_ALLOW_RESIZE;
 
-	ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables, current_size);
-
-	/*
-	 * Update the root table descriptor. The new size will be the current
-	 * number of tables plus the increment, independent of the reserved
-	 * size of the original table list.
-	 */
-	acpi_gbl_root_table_list.tables = tables;
-	acpi_gbl_root_table_list.max_table_count =
-	    acpi_gbl_root_table_list.current_table_count +
-	    ACPI_ROOT_TABLE_SIZE_INCREMENT;
-	acpi_gbl_root_table_list.flags =
-	    ACPI_ROOT_ORIGIN_ALLOCATED | ACPI_ROOT_ALLOW_RESIZE;
-
-	return_ACPI_STATUS(AE_OK);
+	status = acpi_tb_resize_root_table_list();
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************

drivers/acpi/acpica/utosi.c

@@ -73,6 +73,7 @@ static struct acpi_interface_info acpi_default_supported_interfaces[] = {
 	{"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1},	/* Windows Vista SP1 - Added 09/2009 */
 	{"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2},	/* Windows Vista SP2 - Added 09/2010 */
 	{"Windows 2009", NULL, 0, ACPI_OSI_WIN_7},	/* Windows 7 and Server 2008 R2 - Added 09/2009 */
+	{"Windows 2012", NULL, 0, ACPI_OSI_WIN_8},	/* Windows 8 and Server 2012 - Added 08/2012 */
 
 	/* Feature Group Strings */
 

drivers/acpi/bus.c

@@ -994,14 +994,18 @@ static int __init acpi_bus_init(void)
 	status = acpi_ec_ecdt_probe();
 	/* Ignore result. Not having an ECDT is not fatal. */
 
-	acpi_bus_osc_support();
-
 	status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n");
 		goto error1;
 	}
 
+	/*
+	 * _OSC method may exist in module level code,
+	 * so it must be run after ACPI_FULL_INITIALIZATION
+	 */
+	acpi_bus_osc_support();
+
 	/*
 	 * _PDC control method may load dynamic SSDT tables,
 	 * and we need to install the table handler before that.

drivers/acpi/button.c

@@ -450,15 +450,4 @@ static int acpi_button_remove(struct acpi_device *device, int type)
 	return 0;
 }
 
-static int __init acpi_button_init(void)
-{
-	return acpi_bus_register_driver(&acpi_button_driver);
-}
-
-static void __exit acpi_button_exit(void)
-{
-	acpi_bus_unregister_driver(&acpi_button_driver);
-}
-
-module_init(acpi_button_init);
-module_exit(acpi_button_exit);
+module_acpi_driver(acpi_button_driver);

drivers/acpi/fan.c

@@ -212,24 +212,4 @@ static int acpi_fan_resume(struct device *dev)
 }
 #endif
 
-static int __init acpi_fan_init(void)
-{
-	int result = 0;
-
-	result = acpi_bus_register_driver(&acpi_fan_driver);
-	if (result < 0)
-		return -ENODEV;
-
-	return 0;
-}
-
-static void __exit acpi_fan_exit(void)
-{
-
-	acpi_bus_unregister_driver(&acpi_fan_driver);
-
-	return;
-}
-
-module_init(acpi_fan_init);
-module_exit(acpi_fan_exit);
+module_acpi_driver(acpi_fan_driver);

drivers/acpi/glue.c

@@ -25,6 +25,8 @@
 static LIST_HEAD(bus_type_list);
 static DECLARE_RWSEM(bus_type_sem);
 
+#define PHYSICAL_NODE_STRING "physical_node"
+
 int register_acpi_bus_type(struct acpi_bus_type *type)
 {
 	if (acpi_disabled)
@@ -124,84 +126,119 @@ acpi_handle acpi_get_child(acpi_handle parent, u64 address)
 
 EXPORT_SYMBOL(acpi_get_child);
 
-/* Link ACPI devices with physical devices */
-static void acpi_glue_data_handler(acpi_handle handle,
-				   void *context)
-{
-	/* we provide an empty handler */
-}
-
-/* Note: a success call will increase reference count by one */
-struct device *acpi_get_physical_device(acpi_handle handle)
-{
-	acpi_status status;
-	struct device *dev;
-
-	status = acpi_get_data(handle, acpi_glue_data_handler, (void **)&dev);
-	if (ACPI_SUCCESS(status))
-		return get_device(dev);
-	return NULL;
-}
-
-EXPORT_SYMBOL(acpi_get_physical_device);
-
 static int acpi_bind_one(struct device *dev, acpi_handle handle)
 {
 	struct acpi_device *acpi_dev;
 	acpi_status status;
+	struct acpi_device_physical_node *physical_node;
+	char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
+	int retval = -EINVAL;
 
 	if (dev->archdata.acpi_handle) {
 		dev_warn(dev, "Drivers changed 'acpi_handle'\n");
 		return -EINVAL;
 	}
+
 	get_device(dev);
-	status = acpi_attach_data(handle, acpi_glue_data_handler, dev);
-	if (ACPI_FAILURE(status)) {
-		put_device(dev);
-		return -EINVAL;
+	status = acpi_bus_get_device(handle, &acpi_dev);
+	if (ACPI_FAILURE(status))
+		goto err;
+
+	physical_node = kzalloc(sizeof(struct acpi_device_physical_node),
+		GFP_KERNEL);
+	if (!physical_node) {
+		retval = -ENOMEM;
+		goto err;
 	}
-	dev->archdata.acpi_handle = handle;
 
-	status = acpi_bus_get_device(handle, &acpi_dev);
-	if (!ACPI_FAILURE(status)) {
-		int ret;
+	mutex_lock(&acpi_dev->physical_node_lock);
+	/* allocate physical node id according to physical_node_id_bitmap */
+	physical_node->node_id =
+		find_first_zero_bit(acpi_dev->physical_node_id_bitmap,
+		ACPI_MAX_PHYSICAL_NODE);
+	if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
+		retval = -ENOSPC;
+		mutex_unlock(&acpi_dev->physical_node_lock);
+		goto err;
+	}
+
+	set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap);
+	physical_node->dev = dev;
+	list_add_tail(&physical_node->node, &acpi_dev->physical_node_list);
+	acpi_dev->physical_node_count++;
+	mutex_unlock(&acpi_dev->physical_node_lock);
+
+	dev->archdata.acpi_handle = handle;
 
-		ret = sysfs_create_link(&dev->kobj, &acpi_dev->dev.kobj,
+	if (!physical_node->node_id)
+		strcpy(physical_node_name, PHYSICAL_NODE_STRING);
+	else
+		sprintf(physical_node_name,
+			"physical_node%d", physical_node->node_id);
+	retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
+			physical_node_name);
+	retval = sysfs_create_link(&dev->kobj, &acpi_dev->dev.kobj,
 		"firmware_node");
-		ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
-				"physical_node");
+
 	if (acpi_dev->wakeup.flags.valid)
 		device_set_wakeup_capable(dev, true);
-	}
 
 	return 0;
+
+ err:
+	put_device(dev);
+	return retval;
 }
 
 static int acpi_unbind_one(struct device *dev)
 {
+	struct acpi_device_physical_node *entry;
+	struct acpi_device *acpi_dev;
+	acpi_status status;
+	struct list_head *node, *next;
+
 	if (!dev->archdata.acpi_handle)
 		return 0;
-	if (dev == acpi_get_physical_device(dev->archdata.acpi_handle)) {
-		struct acpi_device *acpi_dev;
 
-		/* acpi_get_physical_device increase refcnt by one */
-		put_device(dev);
+	status = acpi_bus_get_device(dev->archdata.acpi_handle,
+		&acpi_dev);
+	if (ACPI_FAILURE(status))
+		goto err;
 
-		if (!acpi_bus_get_device(dev->archdata.acpi_handle,
-					&acpi_dev)) {
-			sysfs_remove_link(&dev->kobj, "firmware_node");
-			sysfs_remove_link(&acpi_dev->dev.kobj, "physical_node");
-		}
+	mutex_lock(&acpi_dev->physical_node_lock);
+	list_for_each_safe(node, next, &acpi_dev->physical_node_list) {
+		char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
 
-		acpi_detach_data(dev->archdata.acpi_handle,
-				 acpi_glue_data_handler);
+		entry = list_entry(node, struct acpi_device_physical_node,
+			node);
+		if (entry->dev != dev)
+			continue;
+
+		list_del(node);
+		clear_bit(entry->node_id, acpi_dev->physical_node_id_bitmap);
+
+		acpi_dev->physical_node_count--;
+
+		if (!entry->node_id)
+			strcpy(physical_node_name, PHYSICAL_NODE_STRING);
+		else
+			sprintf(physical_node_name,
+				"physical_node%d", entry->node_id);
+
+		sysfs_remove_link(&acpi_dev->dev.kobj, physical_node_name);
+		sysfs_remove_link(&dev->kobj, "firmware_node");
 		dev->archdata.acpi_handle = NULL;
 		/* acpi_bind_one increase refcnt by one */
 		put_device(dev);
-	} else {
-		dev_err(dev, "Oops, 'acpi_handle' corrupt\n");
+		kfree(entry);
 	}
+	mutex_unlock(&acpi_dev->physical_node_lock);
+
 	return 0;
+
+err:
+	dev_err(dev, "Oops, 'acpi_handle' corrupt\n");
+	return -EINVAL;
 }
 
 static int acpi_platform_notify(struct device *dev)

drivers/acpi/hed.c

@@ -86,25 +86,7 @@ static struct acpi_driver acpi_hed_driver = {
 		.notify = acpi_hed_notify,
 	},
 };
-
-static int __init acpi_hed_init(void)
-{
-	if (acpi_disabled)
-		return -ENODEV;
-
-	if (acpi_bus_register_driver(&acpi_hed_driver) < 0)
-		return -ENODEV;
-
-	return 0;
-}
-
-static void __exit acpi_hed_exit(void)
-{
-	acpi_bus_unregister_driver(&acpi_hed_driver);
-}
-
-module_init(acpi_hed_init);
-module_exit(acpi_hed_exit);
+module_acpi_driver(acpi_hed_driver);
 
 ACPI_MODULE_NAME("hed");
 MODULE_AUTHOR("Huang Ying");

drivers/acpi/proc.c

@@ -302,26 +302,41 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
 	list_for_each_safe(node, next, &acpi_wakeup_device_list) {
 		struct acpi_device *dev =
 		    container_of(node, struct acpi_device, wakeup_list);
-		struct device *ldev;
+		struct acpi_device_physical_node *entry;
 
 		if (!dev->wakeup.flags.valid)
 			continue;
 
-		ldev = acpi_get_physical_device(dev->handle);
-		seq_printf(seq, "%s\t  S%d\t%c%-8s  ",
+		seq_printf(seq, "%s\t  S%d\t",
 			   dev->pnp.bus_id,
-			   (u32) dev->wakeup.sleep_state,
+			   (u32) dev->wakeup.sleep_state);
+
+		if (!dev->physical_node_count)
+			seq_printf(seq, "%c%-8s\n",
+				dev->wakeup.flags.run_wake ?
+				'*' : ' ', "disabled");
+		else {
+			struct device *ldev;
+			list_for_each_entry(entry, &dev->physical_node_list,
+					node) {
+				ldev = get_device(entry->dev);
+				if (!ldev)
+					continue;
+
+				if (&entry->node !=
+						dev->physical_node_list.next)
+					seq_printf(seq, "\t\t");
+
+				seq_printf(seq, "%c%-8s  %s:%s\n",
 					dev->wakeup.flags.run_wake ? '*' : ' ',
-			   (device_may_wakeup(&dev->dev)
-			     || (ldev && device_may_wakeup(ldev))) ?
-			       "enabled" : "disabled");
-		if (ldev)
-			seq_printf(seq, "%s:%s",
-				   ldev->bus ? ldev->bus->name : "no-bus",
-				   dev_name(ldev));
-		seq_printf(seq, "\n");
+					(device_may_wakeup(&dev->dev) ||
+					(ldev && device_may_wakeup(ldev))) ?
+					"enabled" : "disabled",
+					ldev->bus ? ldev->bus->name :
+					"no-bus", dev_name(ldev));
 				put_device(ldev);
-
+			}
+		}
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
@@ -329,11 +344,13 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
 
 static void physical_device_enable_wakeup(struct acpi_device *adev)
 {
-	struct device *dev = acpi_get_physical_device(adev->handle);
+	struct acpi_device_physical_node *entry;
 
-	if (dev && device_can_wakeup(dev)) {
-		bool enable = !device_may_wakeup(dev);
-		device_set_wakeup_enable(dev, enable);
+	list_for_each_entry(entry,
+		&adev->physical_node_list, node)
+		if (entry->dev && device_can_wakeup(entry->dev)) {
+			bool enable = !device_may_wakeup(entry->dev);
+			device_set_wakeup_enable(entry->dev, enable);
 		}
 }
 

drivers/acpi/sbshc.c

@@ -310,23 +310,7 @@ static int acpi_smbus_hc_remove(struct acpi_device *device, int type)
 	return 0;
 }
 
-static int __init acpi_smb_hc_init(void)
-{
-	int result;
-
-	result = acpi_bus_register_driver(&acpi_smb_hc_driver);
-	if (result < 0)
-		return -ENODEV;
-	return 0;
-}
-
-static void __exit acpi_smb_hc_exit(void)
-{
-	acpi_bus_unregister_driver(&acpi_smb_hc_driver);
-}
-
-module_init(acpi_smb_hc_init);
-module_exit(acpi_smb_hc_exit);
+module_acpi_driver(acpi_smb_hc_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexey Starikovskiy");

drivers/acpi/scan.c

@@ -10,6 +10,7 @@
 #include <linux/signal.h>
 #include <linux/kthread.h>
 #include <linux/dmi.h>
+#include <linux/nls.h>
 
 #include <acpi/acpi_drivers.h>
 
@@ -232,8 +233,35 @@ acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *b
 }
 static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
 
+/* sysfs file that shows description text from the ACPI _STR method */
+static ssize_t description_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf) {
+	struct acpi_device *acpi_dev = to_acpi_device(dev);
+	int result;
+
+	if (acpi_dev->pnp.str_obj == NULL)
+		return 0;
+
+	/*
+	 * The _STR object contains a Unicode identifier for a device.
+	 * We need to convert to utf-8 so it can be displayed.
+	 */
+	result = utf16s_to_utf8s(
+		(wchar_t *)acpi_dev->pnp.str_obj->buffer.pointer,
+		acpi_dev->pnp.str_obj->buffer.length,
+		UTF16_LITTLE_ENDIAN, buf,
+		PAGE_SIZE);
+
+	buf[result++] = '\n';
+
+	return result;
+}
+static DEVICE_ATTR(description, 0444, description_show, NULL);
+
 static int acpi_device_setup_files(struct acpi_device *dev)
 {
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	acpi_status status;
 	acpi_handle temp;
 	int result = 0;
@@ -257,6 +285,21 @@ static int acpi_device_setup_files(struct acpi_device *dev)
 			goto end;
 	}
 
+	/*
+	 * If device has _STR, 'description' file is created
+	 */
+	status = acpi_get_handle(dev->handle, "_STR", &temp);
+	if (ACPI_SUCCESS(status)) {
+		status = acpi_evaluate_object(dev->handle, "_STR",
+					NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			buffer.pointer = NULL;
+		dev->pnp.str_obj = buffer.pointer;
+		result = device_create_file(&dev->dev, &dev_attr_description);
+		if (result)
+			goto end;
+	}
+
         /*
          * If device has _EJ0, 'eject' file is created that is used to trigger
          * hot-removal function from userland.
@@ -274,8 +317,15 @@ static void acpi_device_remove_files(struct acpi_device *dev)
 	acpi_handle temp;
 
 	/*
-	 * If device has _EJ0, 'eject' file is created that is used to trigger
-	 * hot-removal function from userland.
+	 * If device has _STR, remove 'description' file
+	 */
+	status = acpi_get_handle(dev->handle, "_STR", &temp);
+	if (ACPI_SUCCESS(status)) {
+		kfree(dev->pnp.str_obj);
+		device_remove_file(&dev->dev, &dev_attr_description);
+	}
+	/*
+	 * If device has _EJ0, remove 'eject' file.
 	 */
 	status = acpi_get_handle(dev->handle, "_EJ0", &temp);
 	if (ACPI_SUCCESS(status))
@@ -481,6 +531,8 @@ static int acpi_device_register(struct acpi_device *device)
 	INIT_LIST_HEAD(&device->children);
 	INIT_LIST_HEAD(&device->node);
 	INIT_LIST_HEAD(&device->wakeup_list);
+	INIT_LIST_HEAD(&device->physical_node_list);
+	mutex_init(&device->physical_node_lock);
 
 	new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
 	if (!new_bus_id) {

drivers/acpi/tables.c

@@ -240,9 +240,16 @@ acpi_table_parse_entries(char *id,
 	       table_end) {
 		if (entry->type == entry_id
 		    && (!max_entries || count++ < max_entries))
-			if (handler(entry, table_end)) {
-				early_acpi_os_unmap_memory((char *)table_header, tbl_size);
-				return -EINVAL;
+			if (handler(entry, table_end))
+				goto err;
+
+		/*
+		 * If entry->length is 0, break from this loop to avoid
+		 * infinite loop.
+		 */
+		if (entry->length == 0) {
+			pr_err(PREFIX "[%4.4s:0x%02x] Invalid zero length\n", id, entry_id);
+			goto err;
 		}
 
 		entry = (struct acpi_subtable_header *)
@@ -255,6 +262,9 @@ acpi_table_parse_entries(char *id,
 
 	early_acpi_os_unmap_memory((char *)table_header, tbl_size);
 	return count;
+err:
+	early_acpi_os_unmap_memory((char *)table_header, tbl_size);
+	return -EINVAL;
 }
 
 int __init

drivers/acpi/utils.c

@@ -384,7 +384,7 @@ acpi_evaluate_reference(acpi_handle handle,
 EXPORT_SYMBOL(acpi_evaluate_reference);
 
 acpi_status
-acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld *pld)
+acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld_info **pld)
 {
 	acpi_status status;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -400,13 +400,16 @@ acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld *pld)
 	if (!output || output->type != ACPI_TYPE_PACKAGE
 	    || !output->package.count
 	    || output->package.elements[0].type != ACPI_TYPE_BUFFER
-	    || output->package.elements[0].buffer.length > sizeof(*pld)) {
+	    || output->package.elements[0].buffer.length < ACPI_PLD_REV1_BUFFER_SIZE) {
 		status = AE_TYPE;
 		goto out;
 	}
 
-	memcpy(pld, output->package.elements[0].buffer.pointer,
-	       output->package.elements[0].buffer.length);
+	status = acpi_decode_pld_buffer(
+			output->package.elements[0].buffer.pointer,
+			output->package.elements[0].buffer.length,
+			pld);
+
 out:
 	kfree(buffer.pointer);
 	return status;

drivers/i2c/busses/i2c-scmi.c

@@ -426,19 +426,7 @@ static struct acpi_driver acpi_smbus_cmi_driver = {
 		.remove = acpi_smbus_cmi_remove,
 	},
 };
-
-static int __init acpi_smbus_cmi_init(void)
-{
-	return acpi_bus_register_driver(&acpi_smbus_cmi_driver);
-}
-
-static void __exit acpi_smbus_cmi_exit(void)
-{
-	acpi_bus_unregister_driver(&acpi_smbus_cmi_driver);
-}
-
-module_init(acpi_smbus_cmi_init);
-module_exit(acpi_smbus_cmi_exit);
+module_acpi_driver(acpi_smbus_cmi_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Crane Cai <crane.cai@amd.com>");

drivers/idle/intel_idle.c

@@ -413,6 +413,7 @@ static const struct x86_cpu_id intel_idle_ids[] = {
 	ICPU(0x2a, idle_cpu_snb),
 	ICPU(0x2d, idle_cpu_snb),
 	ICPU(0x3a, idle_cpu_ivb),
+	ICPU(0x3e, idle_cpu_ivb),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);

drivers/input/misc/atlas_btns.c

@@ -151,22 +151,7 @@ static struct acpi_driver atlas_acpi_driver = {
 		.remove	= atlas_acpi_button_remove,
 	},
 };
-
-static int __init atlas_acpi_init(void)
-{
-	if (acpi_disabled)
-		return -ENODEV;
-
-	return acpi_bus_register_driver(&atlas_acpi_driver);
-}
-
-static void __exit atlas_acpi_exit(void)
-{
-	acpi_bus_unregister_driver(&atlas_acpi_driver);
-}
-
-module_init(atlas_acpi_init);
-module_exit(atlas_acpi_exit);
+module_acpi_driver(atlas_acpi_driver);
 
 MODULE_AUTHOR("Jaya Kumar");
 MODULE_LICENSE("GPL");

drivers/platform/x86/hp_accel.c

@@ -382,31 +382,8 @@ static struct acpi_driver lis3lv02d_driver = {
 	},
 	.drv.pm = HP_ACCEL_PM,
 };
-
-static int __init lis3lv02d_init_module(void)
-{
-	int ret;
-
-	if (acpi_disabled)
-		return -ENODEV;
-
-	ret = acpi_bus_register_driver(&lis3lv02d_driver);
-	if (ret < 0)
-		return ret;
-
-	pr_info("driver loaded\n");
-
-	return 0;
-}
-
-static void __exit lis3lv02d_exit_module(void)
-{
-	acpi_bus_unregister_driver(&lis3lv02d_driver);
-}
+module_acpi_driver(lis3lv02d_driver);
 
 MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.");
 MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
 MODULE_LICENSE("GPL");
-
-module_init(lis3lv02d_init_module);
-module_exit(lis3lv02d_exit_module);

drivers/platform/x86/ideapad-laptop.c

@@ -917,20 +917,8 @@ static struct acpi_driver ideapad_acpi_driver = {
 	.drv.pm = &ideapad_pm,
 	.owner = THIS_MODULE,
 };
-
-static int __init ideapad_acpi_module_init(void)
-{
-	return acpi_bus_register_driver(&ideapad_acpi_driver);
-}
-
-static void __exit ideapad_acpi_module_exit(void)
-{
-	acpi_bus_unregister_driver(&ideapad_acpi_driver);
-}
+module_acpi_driver(ideapad_acpi_driver);
 
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
 MODULE_DESCRIPTION("IdeaPad ACPI Extras");
 MODULE_LICENSE("GPL");
-
-module_init(ideapad_acpi_module_init);
-module_exit(ideapad_acpi_module_exit);

drivers/platform/x86/topstar-laptop.c

@@ -186,27 +186,7 @@ static struct acpi_driver acpi_topstar_driver = {
 		.notify = acpi_topstar_notify,
 	},
 };
-
-static int __init topstar_laptop_init(void)
-{
-	int ret;
-
-	ret = acpi_bus_register_driver(&acpi_topstar_driver);
-	if (ret < 0)
-		return ret;
-
-	pr_info("ACPI extras driver loaded\n");
-
-	return 0;
-}
-
-static void __exit topstar_laptop_exit(void)
-{
-	acpi_bus_unregister_driver(&acpi_topstar_driver);
-}
-
-module_init(topstar_laptop_init);
-module_exit(topstar_laptop_exit);
+module_acpi_driver(acpi_topstar_driver);
 
 MODULE_AUTHOR("Herton Ronaldo Krzesinski");
 MODULE_DESCRIPTION("Topstar Laptop ACPI Extras driver");

drivers/platform/x86/toshiba_bluetooth.c

@@ -122,30 +122,10 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device)
 	return result;
 }
 
-static int __init toshiba_bt_rfkill_init(void)
-{
-	int result;
-
-	result = acpi_bus_register_driver(&toshiba_bt_rfkill_driver);
-	if (result < 0) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Error registering driver\n"));
-		return result;
-	}
-
-	return 0;
-}
-
 static int toshiba_bt_rfkill_remove(struct acpi_device *device, int type)
 {
 	/* clean up */
 	return 0;
 }
 
-static void __exit toshiba_bt_rfkill_exit(void)
-{
-	acpi_bus_unregister_driver(&toshiba_bt_rfkill_driver);
-}
-
-module_init(toshiba_bt_rfkill_init);
-module_exit(toshiba_bt_rfkill_exit);
+module_acpi_driver(toshiba_bt_rfkill_driver);

drivers/platform/x86/xo15-ebook.c

@@ -170,16 +170,4 @@ static struct acpi_driver xo15_ebook_driver = {
 	},
 	.drv.pm = &ebook_switch_pm,
 };
-
-static int __init xo15_ebook_init(void)
-{
-	return acpi_bus_register_driver(&xo15_ebook_driver);
-}
-
-static void __exit xo15_ebook_exit(void)
-{
-	acpi_bus_unregister_driver(&xo15_ebook_driver);
-}
-
-module_init(xo15_ebook_init);
-module_exit(xo15_ebook_exit);
+module_acpi_driver(xo15_ebook_driver);

drivers/pnp/pnpacpi/core.c

@@ -321,14 +321,9 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp)
 {
 	struct acpi_device *acpi = to_acpi_device(dev);
 	struct pnp_dev *pnp = _pnp;
-	struct device *physical_device;
-
-	physical_device = acpi_get_physical_device(acpi->handle);
-	if (physical_device)
-		put_device(physical_device);
 
 	/* true means it matched */
-	return !physical_device
+	return !acpi->physical_node_count
 	    && compare_pnp_id(pnp->id, acpi_device_hid(acpi));
 }
 

drivers/usb/core/usb-acpi.c

@@ -52,18 +52,19 @@ static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle)
 static int usb_acpi_check_pld(struct usb_device *udev, acpi_handle handle)
 {
 	acpi_status status;
-	struct acpi_pld pld;
+	struct acpi_pld_info *pld;
 
 	status = acpi_get_physical_device_location(handle, &pld);
 
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	if (pld.user_visible)
+	if (pld->user_visible)
 		udev->removable = USB_DEVICE_REMOVABLE;
 	else
 		udev->removable = USB_DEVICE_FIXED;
 
+	ACPI_FREE(pld);
 	return 0;
 }
 

include/acpi/acnames.h

@@ -63,11 +63,10 @@
 #define METHOD_NAME__PRW        "_PRW"
 #define METHOD_NAME__SRS        "_SRS"
 #define METHOD_NAME__CBA        "_CBA"
+#define METHOD_NAME__PLD        "_PLD"
 
 /* Method names - these methods must appear at the namespace root */
 
-#define METHOD_PATHNAME__BFS    "\\_BFS"
-#define METHOD_PATHNAME__GTS    "\\_GTS"
 #define METHOD_PATHNAME__PTS    "\\_PTS"
 #define METHOD_PATHNAME__SST    "\\_SI._SST"
 #define METHOD_PATHNAME__WAK    "\\_WAK"

include/acpi/acpi_bus.h

@@ -54,37 +54,8 @@ acpi_status
 acpi_evaluate_hotplug_ost(acpi_handle handle, u32 source_event,
 			u32 status_code, struct acpi_buffer *status_buf);
 
-struct acpi_pld {
-	unsigned int revision:7; /* 0 */
-	unsigned int ignore_colour:1; /* 7 */
-	unsigned int colour:24; /* 8 */
-	unsigned int width:16; /* 32 */
-	unsigned int height:16; /* 48 */
-	unsigned int user_visible:1; /* 64 */
-	unsigned int dock:1; /* 65 */
-	unsigned int lid:1; /* 66 */
-	unsigned int panel:3; /* 67 */
-	unsigned int vertical_pos:2; /* 70 */
-	unsigned int horizontal_pos:2; /* 72 */
-	unsigned int shape:4; /* 74 */
-	unsigned int group_orientation:1; /* 78 */
-	unsigned int group_token:8; /* 79 */
-	unsigned int group_position:8; /* 87 */
-	unsigned int bay:1; /* 95 */
-	unsigned int ejectable:1; /* 96 */
-	unsigned int ospm_eject_required:1; /* 97 */
-	unsigned int cabinet_number:8; /* 98 */
-	unsigned int card_cage_number:8; /* 106 */
-	unsigned int reference:1; /* 114 */
-	unsigned int rotation:4; /* 115 */
-	unsigned int order:5; /* 119 */
-	unsigned int reserved:4; /* 124 */
-	unsigned int vertical_offset:16; /* 128 */
-	unsigned int horizontal_offset:16; /* 144 */
-} __attribute__((__packed__));
-
 acpi_status
-acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld *pld);
+acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld_info **pld);
 #ifdef CONFIG_ACPI
 
 #include <linux/proc_fs.h>
@@ -208,6 +179,7 @@ struct acpi_device_pnp {
 	struct list_head ids;		/* _HID and _CIDs */
 	acpi_device_name device_name;	/* Driver-determined */
 	acpi_device_class device_class;	/*        "          */
+	union acpi_object *str_obj;	/* unicode string for _STR method */
 };
 
 #define acpi_device_bid(d)	((d)->pnp.bus_id)
@@ -282,8 +254,16 @@ struct acpi_device_wakeup {
 	int prepare_count;
 };
 
-/* Device */
+struct acpi_device_physical_node {
+	u8 node_id;
+	struct list_head node;
+	struct device *dev;
+};
+
+/* set maximum of physical nodes to 32 for expansibility */
+#define ACPI_MAX_PHYSICAL_NODE	32
 
+/* Device */
 struct acpi_device {
 	int device_type;
 	acpi_handle handle;		/* no handle for fixed hardware */
@@ -304,6 +284,10 @@ struct acpi_device {
 	struct device dev;
 	struct acpi_bus_ops bus_ops;	/* workaround for different code path for hotplug */
 	enum acpi_bus_removal_type removal_type;	/* indicate for different removal type */
+	u8 physical_node_count;
+	struct list_head physical_node_list;
+	struct mutex physical_node_lock;
+	DECLARE_BITMAP(physical_node_id_bitmap, ACPI_MAX_PHYSICAL_NODE);
 };
 
 static inline void *acpi_driver_data(struct acpi_device *d)
@@ -381,6 +365,19 @@ int acpi_match_device_ids(struct acpi_device *device,
 int acpi_create_dir(struct acpi_device *);
 void acpi_remove_dir(struct acpi_device *);
 
+
+/**
+ * module_acpi_driver(acpi_driver) - Helper macro for registering an ACPI driver
+ * @__acpi_driver: acpi_driver struct
+ *
+ * Helper macro for ACPI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_acpi_driver(__acpi_driver) \
+	module_driver(__acpi_driver, acpi_bus_register_driver, \
+		      acpi_bus_unregister_driver)
+
 /*
  * Bind physical devices with ACPI devices
  */
@@ -394,7 +391,6 @@ struct acpi_bus_type {
 };
 int register_acpi_bus_type(struct acpi_bus_type *);
 int unregister_acpi_bus_type(struct acpi_bus_type *);
-struct device *acpi_get_physical_device(acpi_handle);
 
 struct acpi_pci_root {
 	struct list_head node;

include/acpi/acpixf.h

@@ -47,11 +47,12 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20120711
+#define ACPI_CA_VERSION                 0x20120913
 
 #include "acconfig.h"
 #include "actypes.h"
 #include "actbl.h"
+#include "acbuffer.h"
 
 extern u8 acpi_gbl_permanent_mmap;
 
@@ -144,6 +145,10 @@ acpi_check_address_range(acpi_adr_space_type space_id,
 			 acpi_physical_address address,
 			 acpi_size length, u8 warn);
 
+acpi_status
+acpi_decode_pld_buffer(u8 *in_buffer,
+		       acpi_size length, struct acpi_pld_info **return_buffer);
+
 /*
  * ACPI Memory management
  */

include/acpi/actbl.h

@@ -79,9 +79,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
@@ -94,7 +100,7 @@
 struct acpi_table_header {
 	char signature[ACPI_NAME_SIZE];	/* ASCII table signature */
 	u32 length;		/* Length of table in bytes, including this header */
-	u8 revision;		/* ACPI Specification minor version # */
+	u8 revision;		/* ACPI Specification minor version number */
 	u8 checksum;		/* To make sum of entire table == 0 */
 	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */
 	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */
@@ -108,7 +114,7 @@ struct acpi_table_header {
  * GAS - Generic Address Structure (ACPI 2.0+)
  *
  * Note: Since this structure is used in the ACPI tables, it is byte aligned.
- * If misaliged access is not supported by the hardware, accesses to the
+ * If misaligned access is not supported by the hardware, accesses to the
  * 64-bit Address field must be performed with care.
  *
  ******************************************************************************/
@@ -210,18 +216,18 @@ struct acpi_table_fadt {
 	u8 preferred_profile;	/* Conveys preferred power management profile to OSPM. */
 	u16 sci_interrupt;	/* System vector of SCI interrupt */
 	u32 smi_command;	/* 32-bit Port address of SMI command port */
-	u8 acpi_enable;		/* Value to write to smi_cmd to enable ACPI */
-	u8 acpi_disable;	/* Value to write to smi_cmd to disable ACPI */
-	u8 s4_bios_request;	/* Value to write to SMI CMD to enter S4BIOS state */
+	u8 acpi_enable;		/* Value to write to SMI_CMD to enable ACPI */
+	u8 acpi_disable;	/* Value to write to SMI_CMD to disable ACPI */
+	u8 s4_bios_request;	/* Value to write to SMI_CMD to enter S4BIOS state */
 	u8 pstate_control;	/* Processor performance state control */
-	u32 pm1a_event_block;	/* 32-bit Port address of Power Mgt 1a Event Reg Blk */
-	u32 pm1b_event_block;	/* 32-bit Port address of Power Mgt 1b Event Reg Blk */
-	u32 pm1a_control_block;	/* 32-bit Port address of Power Mgt 1a Control Reg Blk */
-	u32 pm1b_control_block;	/* 32-bit Port address of Power Mgt 1b Control Reg Blk */
-	u32 pm2_control_block;	/* 32-bit Port address of Power Mgt 2 Control Reg Blk */
-	u32 pm_timer_block;	/* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
-	u32 gpe0_block;		/* 32-bit Port address of General Purpose Event 0 Reg Blk */
-	u32 gpe1_block;		/* 32-bit Port address of General Purpose Event 1 Reg Blk */
+	u32 pm1a_event_block;	/* 32-bit port address of Power Mgt 1a Event Reg Blk */
+	u32 pm1b_event_block;	/* 32-bit port address of Power Mgt 1b Event Reg Blk */
+	u32 pm1a_control_block;	/* 32-bit port address of Power Mgt 1a Control Reg Blk */
+	u32 pm1b_control_block;	/* 32-bit port address of Power Mgt 1b Control Reg Blk */
+	u32 pm2_control_block;	/* 32-bit port address of Power Mgt 2 Control Reg Blk */
+	u32 pm_timer_block;	/* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
+	u32 gpe0_block;		/* 32-bit port address of General Purpose Event 0 Reg Blk */
+	u32 gpe1_block;		/* 32-bit port address of General Purpose Event 1 Reg Blk */
 	u8 pm1_event_length;	/* Byte Length of ports at pm1x_event_block */
 	u8 pm1_control_length;	/* Byte Length of ports at pm1x_control_block */
 	u8 pm2_control_length;	/* Byte Length of ports at pm2_control_block */
@@ -229,12 +235,12 @@ struct acpi_table_fadt {
 	u8 gpe0_block_length;	/* Byte Length of ports at gpe0_block */
 	u8 gpe1_block_length;	/* Byte Length of ports at gpe1_block */
 	u8 gpe1_base;		/* Offset in GPE number space where GPE1 events start */
-	u8 cst_control;		/* Support for the _CST object and C States change notification */
+	u8 cst_control;		/* Support for the _CST object and C-States change notification */
 	u16 c2_latency;		/* Worst case HW latency to enter/exit C2 state */
 	u16 c3_latency;		/* Worst case HW latency to enter/exit C3 state */
-	u16 flush_size;		/* Processor's memory cache line width, in bytes */
+	u16 flush_size;		/* Processor memory cache line width, in bytes */
 	u16 flush_stride;	/* Number of flush strides that need to be read */
-	u8 duty_offset;		/* Processor duty cycle index in processor's P_CNT reg */
+	u8 duty_offset;		/* Processor duty cycle index in processor P_CNT reg */
 	u8 duty_width;		/* Processor duty cycle value bit width in P_CNT register */
 	u8 day_alarm;		/* Index to day-of-month alarm in RTC CMOS RAM */
 	u8 month_alarm;		/* Index to month-of-year alarm in RTC CMOS RAM */
@@ -255,11 +261,11 @@ struct acpi_table_fadt {
 	struct acpi_generic_address xpm_timer_block;	/* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
 	struct acpi_generic_address xgpe0_block;	/* 64-bit Extended General Purpose Event 0 Reg Blk address */
 	struct acpi_generic_address xgpe1_block;	/* 64-bit Extended General Purpose Event 1 Reg Blk address */
-	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register */
-	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register */
+	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register (ACPI 5.0) */
+	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register (ACPI 5.0) */
 };
 
-/* Masks for FADT Boot Architecture Flags (boot_flags) */
+/* Masks for FADT Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
 
 #define ACPI_FADT_LEGACY_DEVICES    (1)  	/* 00: [V2] System has LPC or ISA bus devices */
 #define ACPI_FADT_8042              (1<<1)	/* 01: [V3] System has an 8042 controller on port 60/64 */
@@ -272,13 +278,13 @@ struct acpi_table_fadt {
 
 /* Masks for FADT flags */
 
-#define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The wbinvd instruction works properly */
-#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] wbinvd flushes but does not invalidate caches */
+#define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The WBINVD instruction works properly */
+#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] WBINVD flushes but does not invalidate caches */
 #define ACPI_FADT_C1_SUPPORTED      (1<<2)	/* 02: [V1] All processors support C1 state */
 #define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)	/* 03: [V1] C2 state works on MP system */
 #define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: [V1] Power button is handled as a control method device */
 #define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: [V1] Sleep button is handled as a control method device */
-#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status not in fixed register space */
+#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status is not in fixed register space */
 #define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: [V1] RTC alarm can wake system from S4 */
 #define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: [V1] Docking supported */
@@ -297,7 +303,7 @@ struct acpi_table_fadt {
 
 /* Values for preferred_profile (Preferred Power Management Profiles) */
 
-enum acpi_prefered_pm_profiles {
+enum acpi_preferred_pm_profiles {
 	PM_UNSPECIFIED = 0,
 	PM_DESKTOP = 1,
 	PM_MOBILE = 2,
@@ -335,7 +341,7 @@ union acpi_name_union {
 struct acpi_table_desc {
 	acpi_physical_address address;
 	struct acpi_table_header *pointer;
-	u32 length;		/* Length fixed at 32 bits */
+	u32 length;		/* Length fixed at 32 bits (fixed in table header) */
 	union acpi_name_union signature;
 	acpi_owner_id owner_id;
 	u8 flags;

include/acpi/actbl1.h

@@ -79,9 +79,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
@@ -489,7 +495,9 @@ enum acpi_hest_notify_types {
 	ACPI_HEST_NOTIFY_LOCAL = 2,
 	ACPI_HEST_NOTIFY_SCI = 3,
 	ACPI_HEST_NOTIFY_NMI = 4,
-	ACPI_HEST_NOTIFY_RESERVED = 5	/* 5 and greater are reserved */
+	ACPI_HEST_NOTIFY_CMCI = 5,	/* ACPI 5.0 */
+	ACPI_HEST_NOTIFY_MCE = 6,	/* ACPI 5.0 */
+	ACPI_HEST_NOTIFY_RESERVED = 7	/* 7 and greater are reserved */
 };
 
 /* Values for config_write_enable bitfield above */

include/acpi/actbl2.h

@@ -63,6 +63,8 @@
  */
 #define ACPI_SIG_ASF            "ASF!"	/* Alert Standard Format table */
 #define ACPI_SIG_BOOT           "BOOT"	/* Simple Boot Flag Table */
+#define ACPI_SIG_CSRT           "CSRT"	/* Core System Resource Table */
+#define ACPI_SIG_DBG2           "DBG2"	/* Debug Port table type 2 */
 #define ACPI_SIG_DBGP           "DBGP"	/* Debug Port table */
 #define ACPI_SIG_DMAR           "DMAR"	/* DMA Remapping table */
 #define ACPI_SIG_HPET           "HPET"	/* High Precision Event Timer table */
@@ -96,9 +98,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
@@ -230,6 +238,115 @@ struct acpi_table_boot {
 	u8 reserved[3];
 };
 
+/*******************************************************************************
+ *
+ * CSRT - Core System Resource Table
+ *        Version 0
+ *
+ * Conforms to the "Core System Resource Table (CSRT)", November 14, 2011
+ *
+ ******************************************************************************/
+
+struct acpi_table_csrt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+};
+
+/* Resource Group subtable */
+
+struct acpi_csrt_group {
+	u32 length;
+	u32 vendor_id;
+	u32 subvendor_id;
+	u16 device_id;
+	u16 subdevice_id;
+	u16 revision;
+	u16 reserved;
+	u32 info_length;
+
+	/* Shared data (length = info_length) immediately follows */
+};
+
+/* Resource Descriptor subtable */
+
+struct acpi_csrt_descriptor {
+	u32 length;
+	u16 type;
+	u16 subtype;
+	u32 uid;
+
+	/* Resource-specific information immediately follows */
+};
+
+/* Resource Types */
+
+#define ACPI_CSRT_TYPE_INTERRUPT    0x0001
+#define ACPI_CSRT_TYPE_TIMER        0x0002
+#define ACPI_CSRT_TYPE_DMA          0x0003
+
+/* Resource Subtypes */
+
+#define ACPI_CSRT_XRUPT_LINE        0x0000
+#define ACPI_CSRT_XRUPT_CONTROLLER  0x0001
+#define ACPI_CSRT_TIMER             0x0000
+#define ACPI_CSRT_DMA_CHANNEL       0x0000
+#define ACPI_CSRT_DMA_CONTROLLER    0x0001
+
+/*******************************************************************************
+ *
+ * DBG2 - Debug Port Table 2
+ *        Version 0 (Both main table and subtables)
+ *
+ * Conforms to "Microsoft Debug Port Table 2 (DBG2)", May 22 2012.
+ *
+ ******************************************************************************/
+
+struct acpi_table_dbg2 {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 info_offset;
+	u32 info_count;
+};
+
+/* Debug Device Information Subtable */
+
+struct acpi_dbg2_device {
+	u8 revision;
+	u16 length;
+	u8 register_count;	/* Number of base_address registers */
+	u16 namepath_length;
+	u16 namepath_offset;
+	u16 oem_data_length;
+	u16 oem_data_offset;
+	u16 port_type;
+	u16 port_subtype;
+	u16 reserved;
+	u16 base_address_offset;
+	u16 address_size_offset;
+	/*
+	 * Data that follows:
+	 *    base_address (required) - Each in 12-byte Generic Address Structure format.
+	 *    address_size (required) - Array of u32 sizes corresponding to each base_address register.
+	 *    Namepath    (required) - Null terminated string. Single dot if not supported.
+	 *    oem_data    (optional) - Length is oem_data_length.
+	 */
+};
+
+/* Types for port_type field above */
+
+#define ACPI_DBG2_SERIAL_PORT       0x8000
+#define ACPI_DBG2_1394_PORT         0x8001
+#define ACPI_DBG2_USB_PORT          0x8002
+#define ACPI_DBG2_NET_PORT          0x8003
+
+/* Subtypes for port_subtype field above */
+
+#define ACPI_DBG2_16550_COMPATIBLE  0x0000
+#define ACPI_DBG2_16550_SUBSET      0x0001
+
+#define ACPI_DBG2_1394_STANDARD     0x0000
+
+#define ACPI_DBG2_USB_XHCI          0x0000
+#define ACPI_DBG2_USB_EHCI          0x0001
+
 /*******************************************************************************
  *
  * DBGP - Debug Port table

include/acpi/actbl3.h

@@ -75,7 +75,6 @@
 /* Reserved table signatures */
 
 #define ACPI_SIG_CSRT           "CSRT"	/* Core System Resources Table */
-#define ACPI_SIG_DBG2           "DBG2"	/* Debug Port table 2 */
 #define ACPI_SIG_MATR           "MATR"	/* Memory Address Translation Table */
 #define ACPI_SIG_MSDM           "MSDM"	/* Microsoft Data Management Table */
 #define ACPI_SIG_WPBT           "WPBT"	/* Windows Platform Binary Table */
@@ -87,9 +86,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************

include/acpi/actypes.h

@@ -518,13 +518,6 @@ typedef u64 acpi_integer;
 #define ACPI_SLEEP_TYPE_MAX             0x7
 #define ACPI_SLEEP_TYPE_INVALID         0xFF
 
-/*
- * Sleep/Wake flags
- */
-#define ACPI_NO_OPTIONAL_METHODS        0x00	/* Do not execute any optional methods */
-#define ACPI_EXECUTE_GTS                0x01	/* For enter sleep interface */
-#define ACPI_EXECUTE_BFS                0x02	/* For leave sleep prep interface */
-
 /*
  * Standard notify values
  */

tools/power/acpi/Makefile

+PROG= acpidump
+SRCS=	acpidump.c
+KERNEL_INCLUDE := ../../../include
+CFLAGS += -Wall -Wstrict-prototypes -Wdeclaration-after-statement -Os -s -D_LINUX -DDEFINE_ALTERNATE_TYPES -I$(KERNEL_INCLUDE) 
+
+all: acpidump
+$(PROG) : $(SRCS)
+	$(CC) $(CFLAGS) $(SRCS) -o $(PROG)
+
+CLEANFILES= $(PROG)
+
+clean : 
+	rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS)) *~
+
+install :
+	install acpidump /usr/bin/acpidump
+	install acpidump.8 /usr/share/man/man8
+

tools/power/acpi/acpidump.8

+.TH ACPIDUMP 8
+.SH NAME
+acpidump \- Dump system's ACPI tables to an ASCII file.
+.SH SYNOPSIS
+.ft B
+.B acpidump > acpidump.out
+.SH DESCRIPTION
+\fBacpidump \fP dumps the systems ACPI tables to an ASCII file
+appropriate for attaching to a bug report.
+
+Subsequently, they can be processed by utilities in the ACPICA package.
+.SS Options
+no options worth worrying about.
+.PP
+.SH EXAMPLE
+
+.nf
+# acpidump > acpidump.out
+
+$ acpixtract -a acpidump.out
+        Acpi table [DSDT] -  15974 bytes written to DSDT.dat
+        Acpi table [FACS] -     64 bytes written to FACS.dat
+        Acpi table [FACP] -    116 bytes written to FACP.dat
+        Acpi table [APIC] -    120 bytes written to APIC.dat
+        Acpi table [MCFG] -     60 bytes written to MCFG.dat
+        Acpi table [SSDT] -    444 bytes written to SSDT1.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT2.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT3.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT4.dat
+        Acpi table [SSDT] -    439 bytes written to SSDT5.dat
+        Acpi table [RSDT] -     76 bytes written to RSDT.dat
+        Acpi table [RSDP] -     20 bytes written to RSDP.dat
+
+$ iasl -d *.dat
+...
+.fi
+creates *.dsl, a human readable form which can be edited
+and compiled using iasl.
+
+
+.SH NOTES
+
+.B "acpidump "
+must be run as root.
+
+.SH REFERENCES
+ACPICA: https://acpica.org/
+
+.SH FILES
+.ta
+.nf
+/dev/mem
+/sys/firmware/acpi/tables/dynamic/*
+.fi
+
+.PP
+.SH AUTHOR
+.nf
+Written by Len Brown <len.brown@intel.com>

tools/power/x86/turbostat/turbostat.8

@@ -4,15 +4,11 @@ turbostat \- Report processor frequency and idle statistics
 .SH SYNOPSIS
 .ft B
 .B turbostat
-.RB [ "\-s" ]
-.RB [ "\-v" ]
-.RB [ "\-M MSR#" ]
+.RB [ Options ]
 .RB command
 .br
 .B turbostat
-.RB [ "\-s" ]
-.RB [ "\-v" ]
-.RB [ "\-M MSR#" ]
+.RB [ Options ]
 .RB [ "\-i interval_sec" ]
 .SH DESCRIPTION
 \fBturbostat \fP reports processor topology, frequency
@@ -27,16 +23,23 @@ supports an "invariant" TSC, plus the APERF and MPERF MSRs.
 on processors that additionally support C-state residency counters.
 
 .SS Options
-The \fB-s\fP option limits output to a 1-line system summary for each interval.
+The \fB-p\fP option limits output to the 1st thread in 1st core of each package.
 .PP
-The \fB-c\fP option limits output to the 1st thread in each core.
+The \fB-P\fP option limits output to the 1st thread in each Package.
 .PP
-The \fB-p\fP option limits output to the 1st thread in each package.
+The \fB-S\fP option limits output to a 1-line System Summary for each interval.
 .PP
 The \fB-v\fP option increases verbosity.
 .PP
-The \fB-M MSR#\fP option dumps the specified MSR,
-in addition to the usual frequency and idle statistics.
+The \fB-s\fP option prints the SMI counter, equivalent to "-c 0x34"
+.PP
+The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
+.PP
+The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
+.PP
+The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+.PP
+The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
 .PP
 The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
 The default is 5 seconds.
@@ -150,6 +153,29 @@ Note that turbostat reports average GHz of 3.63, while
 the arithmetic average of the GHz column above is lower.
 This is a weighted average, where the weight is %c0.  ie. it is the total number of
 un-halted cycles elapsed per time divided by the number of CPUs.
+.SH SMI COUNTING EXAMPLE
+On Intel Nehalem and newer processors, MSR 0x34 is a System Management Mode Interrupt (SMI) counter.
+Using the -m option, you can display how many SMIs have fired since reset, or if there
+are SMIs during the measurement interval, you can display the delta using the -d option.
+.nf
+[root@x980 ~]# turbostat -m 0x34
+cor CPU    %c0  GHz  TSC   MSR 0x034    %c1    %c3    %c6   %pc3   %pc6
+          1.41 1.82 3.38  0x00000000   8.92  37.82  51.85  17.37   0.55
+  0   0   3.73 2.03 3.38  0x00000055   1.72  48.25  46.31  17.38   0.55
+  0   6   0.14 1.63 3.38  0x00000056   5.30
+  1   2   2.51 1.80 3.38  0x00000056  15.65  29.33  52.52
+  1   8   0.10 1.65 3.38  0x00000056  18.05
+  2   4   1.16 1.68 3.38  0x00000056   5.87  24.47  68.50
+  2  10   0.10 1.63 3.38  0x00000056   6.93
+  8   1   3.84 1.91 3.38  0x00000056   1.36  50.65  44.16
+  8   7   0.08 1.64 3.38  0x00000056   5.12
+  9   3   1.82 1.73 3.38  0x00000056   7.59  24.21  66.38
+  9   9   0.09 1.68 3.38  0x00000056   9.32
+ 10   5   1.66 1.65 3.38  0x00000056  15.10  50.00  33.23
+ 10  11   1.72 1.65 3.38  0x00000056  15.05
+^C
+[root@x980 ~]# 
+.fi
 .SH NOTES
 
 .B "turbostat "
@@ -165,6 +191,13 @@ may work poorly on Linux-2.6.20 through 2.6.29,
 as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF
 in those kernels.
 
+If the TSC column does not make sense, then
+the other numbers will also make no sense.
+Turbostat is lightweight, and its data collection is not atomic.
+These issues are usually caused by an extremely short measurement
+interval (much less than 1 second), or system activity that prevents
+turbostat from being able to run on all CPUS to quickly collect data.
+
 The APERF, MPERF MSRs are defined to count non-halted cycles.
 Although it is not guaranteed by the architecture, turbostat assumes
 that they count at TSC rate, which is true on all processors tested to date.