Commit 3f7e5815 authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Russell King

[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x

Split the iop3xx mach type into iop32x and iop33x -- split the config
symbols, and move the code in the mach-iop3xx directory to the mach-iop32x
and mach-iop33x directories.
Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 98954df6
......@@ -202,12 +202,20 @@ config ARCH_IMX
help
Support for Motorola's i.MX family of processors (MX1, MXL).
config ARCH_IOP3XX
bool "IOP3xx-based"
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select PCI
help
Support for Intel's IOP3XX (XScale) family of processors.
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select PCI
help
Support for Intel's IOP33X (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
......@@ -312,7 +320,9 @@ source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop3xx/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-iop33x/Kconfig"
source "arch/arm/mach-ixp4xx/Kconfig"
......@@ -848,7 +858,7 @@ source "drivers/block/Kconfig"
source "drivers/acorn/block/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
|| ARCH_IXP23XX
......
......@@ -101,7 +101,8 @@ endif
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
machine-$(CONFIG_ARCH_IOP33X) := iop33x
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
......
......@@ -66,7 +66,8 @@ CONFIG_KMOD=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
......@@ -93,8 +94,6 @@ CONFIG_ARCH_IQ31244=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
CONFIG_ARCH_EP80219=y
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
......
......@@ -67,7 +67,8 @@ CONFIG_KMOD=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
......@@ -94,8 +95,6 @@ CONFIG_ARCH_IQ31244=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
......
......@@ -66,7 +66,8 @@ CONFIG_KMOD=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
......@@ -93,8 +94,6 @@ CONFIG_ARCH_IQ80321=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_IOP33X is not set
#
# IOP3xx Chipset Features
......
......@@ -66,7 +66,8 @@ CONFIG_KMOD=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
# CONFIG_ARCH_IOP32X is not set
CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
......@@ -93,7 +94,6 @@ CONFIG_ARCH_IOP3XX=y
CONFIG_ARCH_IQ80331=y
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP33X=y
#
# IOP3xx Chipset Features
......
......@@ -66,7 +66,8 @@ CONFIG_KMOD=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
# CONFIG_ARCH_IOP32X is not set
CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
......@@ -93,7 +94,6 @@ CONFIG_ARCH_IOP3XX=y
# CONFIG_ARCH_IQ80331 is not set
CONFIG_MACH_IQ80332=y
# CONFIG_ARCH_EP80219 is not set
CONFIG_ARCH_IOP33X=y
#
# IOP3xx Chipset Features
......
if ARCH_IOP3XX
if ARCH_IOP32X
menu "IOP3xx Implementation Options"
menu "IOP32x Implementation Options"
comment "IOP3xx Platform Types"
comment "IOP32x Platform Types"
config ARCH_IQ80321
bool "Enable support for IQ80321"
select ARCH_IOP32X
help
Say Y here if you want to run your kernel on the Intel IQ80321
evaluation kit for the IOP321 chipset.
config ARCH_IQ31244
bool "Enable support for IQ31244"
select ARCH_IOP32X
help
Say Y here if you want to run your kernel on the Intel IQ31244
evaluation kit for the IOP321 chipset.
config ARCH_IQ80331
bool "Enable support for IQ80331"
select ARCH_IOP33X
help
Say Y here if you want to run your kernel on the Intel IQ80331
evaluation kit for the IOP331 chipset.
config MACH_IQ80332
bool "Enable support for IQ80332"
select ARCH_IOP33X
help
Say Y here if you want to run your kernel on the Intel IQ80332
evaluation kit for the IOP332 chipset.
config ARCH_EP80219
bool "Enable support for EP80219"
select ARCH_IOP32X
select ARCH_IQ31244
help
Say Y here if you want to run your kernel on the Intel EP80219
evaluation kit for the Intel 80219 chipset (a IOP321 variant).
# Which IOP variant are we running?
config ARCH_IOP32X
bool
help
The IQ80321 uses the IOP321 variant.
The IQ31244 and EP80219 uses the IOP321 variant.
config ARCH_IOP33X
bool
default ARCH_IQ80331
help
The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant.
comment "IOP3xx Chipset Features"
config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
depends on ARCH_IOP33X
help
Say Y here if you have StepD of the IOP80331 or IOP8033
based platforms.
endmenu
endif
......@@ -2,22 +2,10 @@
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := common.o
obj-y := common.o setup.o irq.o pci.o time.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IOP32X) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
obj-$(CONFIG_ARCH_IOP33X) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o
zreladdr-y := 0xa0008000
params_phys-y := 0xa0000100
initrd_phys-y := 0xa0800000
ifeq ($(CONFIG_ARCH_IOP33X),y)
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
endif
/*
* arch/arm/mach-iop3xx/common.c
* arch/arm/mach-iop32x/common.c
*
* Common routines shared across all IOP3xx implementations
*
......
/*
* linux/arch/arm/mach-iop3xx/mm.c
* linux/arch/arm/mach-iop32x/iq31244-mm.c
*
* Low level memory initialization for iq80321 platform
*
......
/*
* arch/arm/mach-iop3xx/iq80321-pci.c
* arch/arm/mach-iop32x/iq31244-pci.c
*
* PCI support for the Intel IQ80321 reference board
* PCI support for the Intel IQ31244 reference board
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
......
/*
* linux/arch/arm/mach-iop3xx/mm.c
* linux/arch/arm/mach-iop32x/iq80321-mm.c
*
* Low level memory initialization for iq80321 platform
*
......
/*
* arch/arm/mach-iop3xx/iq80321-pci.c
* arch/arm/mach-iop32x/iq80321-pci.c
*
* PCI support for the Intel IQ80321 reference board
*
......
/*
* linux/arch/arm/mach-iop3xx/iop321-irq.c
* linux/arch/arm/mach-iop32x/irq.c
*
* Generic IOP321 IRQ handling functionality
* Generic IOP32X IRQ handling functionality
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
......@@ -86,7 +86,7 @@ void __init iop321_init_irq(void)
machine_is_iq31244()) // all interrupts are inputs to chip
*IOP321_PCIIRSR = 0x0f;
for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++)
for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++)
{
set_irq_chip(i, &ext_chip);
set_irq_handler(i, do_level_IRQ);
......
/*
* arch/arm/mach-iop3xx/iop321-pci.c
* arch/arm/mach-iop32x/pci.c
*
* PCI support for the Intel IOP321 chipset
*
......
/*
* linux/arch/arm/mach-iop3xx/iop321-setup.c
* linux/arch/arm/mach-iop32x/setup.c
*
* Author: Nicolas Pitre <nico@cam.org>
* Copyright (C) 2001 MontaVista Software, Inc.
......
/*
* arch/arm/mach-iop3xx/iop321-time.c
* arch/arm/mach-iop32x/time.c
*
* Timer code for IOP321 based systems
*
......
if ARCH_IOP33X
menu "IOP33x Implementation Options"
comment "IOP33x Platform Types"
config ARCH_IQ80331
bool "Enable support for IQ80331"
help
Say Y here if you want to run your kernel on the Intel IQ80331
evaluation kit for the IOP331 chipset.
config MACH_IQ80332
bool "Enable support for IQ80332"
help
Say Y here if you want to run your kernel on the Intel IQ80332
evaluation kit for the IOP332 chipset.
config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
help
Say Y here if you have StepD of the IOP80331 or IOP8033
based platforms.
endmenu
endif
#
# Makefile for the linux kernel.
#
obj-y := common.o setup.o irq.o pci.o time.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
/*
* arch/arm/mach-iop33x/common.c
*
* Common routines shared across all IOP3xx implementations
*
* Author: Deepak Saxena <dsaxena@mvista.com>
*
* Copyright 2003 (c) MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/delay.h>
#include <asm/hardware.h>
/*
* Shared variables
*/
unsigned long iop3xx_pcibios_min_io = 0;
unsigned long iop3xx_pcibios_min_mem = 0;
/*
* linux/arch/arm/mach-iop3xx/mm.c
* linux/arch/arm/mach-iop33x/iq80331-mm.c
*
* Low level memory initialization for iq80331 platform
*
......
/*
* arch/arm/mach-iop3xx/iq80331-pci.c
* arch/arm/mach-iop33x/iq80331-pci.c
*
* PCI support for the Intel IQ80331 reference board
*
......
/*
* linux/arch/arm/mach-iop3xx/mm.c
* linux/arch/arm/mach-iop33x/iq80332-mm.c
*
* Low level memory initialization for iq80332 platform
*
......
/*
* arch/arm/mach-iop3xx/iq80332-pci.c
* arch/arm/mach-iop33x/iq80332-pci.c
*
* PCI support for the Intel IQ80332 reference board
*
......
/*
* linux/arch/arm/mach-iop3xx/iop331-irq.c
* linux/arch/arm/mach-iop33x/irq.c
*
* Generic IOP331 IRQ handling functionality
*
......@@ -119,7 +119,7 @@ void __init iop331_init_irq(void)
if(machine_is_iq80331()) // all interrupts are inputs to chip
*IOP331_PCIIRSR = 0x0f;
for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++)
for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++)
{
set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2);
set_irq_handler(i, do_level_IRQ);
......
/*
* arch/arm/mach-iop3xx/iop331-pci.c
* arch/arm/mach-iop33x/pci.c
*
* PCI support for the Intel IOP331 chipset
*
......
/*
* linux/arch/arm/mach-iop3xx/iop331-setup.c
* linux/arch/arm/mach-iop33x/setup.c
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2004 Intel Corporation.
......
/*
* arch/arm/mach-iop3xx/iop331-time.c
* arch/arm/mach-iop33x/time.c
*
* Timer code for IOP331 based systems
*
......
......@@ -232,7 +232,7 @@ config CPU_SA1100
# XScale
config CPU_XSCALE
bool
depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
default y
select CPU_32v5
select CPU_ABRT_EV5T
......
......@@ -196,7 +196,7 @@ config I2C_IBM_IIC
config I2C_IOP3XX
tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C
help
Say Y here if you want to use the IIC bus controller on
the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
......
/* linux/include/asm-arm/arch-iop3xx/debug-macro.S
/* linux/include/asm-arm/arch-iop32x/debug-macro.S
*
* Debugging macro include header
*
......@@ -13,23 +13,8 @@
.macro addruart,rx
mov \rx, #0xfe000000 @ physical
#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
orr \rx, \rx, #0x00800000 @ location of the UART
#elif defined(CONFIG_ARCH_IOP33X)
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x000fe000 @ Physical Base
movne \rx, #0
orr \rx, \rx, #0xfe000000
orr \rx, \rx, #0x00f00000 @ Virtual Base
orr \rx, \rx, #0x00001700 @ location of the UART
#else
#error Unknown IOP3XX implementation
#endif
.endm
#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
#define FLOW_CONTROL
#endif
#define UART_SHIFT 0
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-iop3xx/dma.h
* linux/include/asm-arm/arch-iop32x/dma.h
*
* Copyright (C) 2004 Intel Corp.
*
......
/*
* include/asm-arm/arch-iop32x/entry-macro.S
*
* Low-level IRQ helper macros for IOP32x-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/arch/irqs.h>
.macro disable_fiq
.endm
/*
* Note: only deal with normal interrupts, not FIQ
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
cmp \irqstat, #0
beq 1001f
clz \irqnr, \irqstat
mov \base, #31
subs \irqnr,\base,\irqnr
add \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT
1001:
.endm
/*
* linux/include/asm-arm/arch-iop3xx/hardware.h
* linux/include/asm-arm/arch-iop32x/hardware.h
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
......@@ -44,14 +44,11 @@ extern unsigned int processor_id;
*
*/
#include "iop321.h"
#include "iop331.h"
/*
* Board specific bits
*/
#include "iq80321.h"
#include "iq31244.h"
#include "iq80331.h"
#include "iq80332.h"
#endif /* _ASM_ARCH_HARDWARE_H */
/*
* linux/include/asm-arm/arch-iop3xx/io.h
* linux/include/asm-arm/arch-iop32x/io.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
......
/*
* linux/include/asm/arch-iop3xx/iop321.h
* linux/include/asm/arch-iop32x/iop321.h
*
* Intel IOP321 Chip definitions
*
......@@ -21,11 +21,7 @@
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_IOP32X
#define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420))
#else
#define iop_is_321() 0
#endif
#define iop_is_321() 1
#endif
/*
......
/*
* linux/include/asm/arch-iop3xx/iq31244.h
* linux/include/asm/arch-iop32x/iq31244.h
*
* Intel IQ31244 evaluation board registers
*/
......
/*
* linux/include/asm/arch-iop3xx/iq80321.h
* linux/include/asm/arch-iop32x/iq80321.h
*
* Intel IQ80321 evaluation board registers
*/
......
/*
* linux/include/asm-arm/arch-iop3xx/irqs.h
* linux/include/asm-arm/arch-iop32x/irqs.h
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright: (C) 2002 Rory Bolt
......@@ -9,8 +9,8 @@
* published by the Free Software Foundation.
*
*/
#ifndef _IOP321_IRQS_H_
#define _IOP321_IRQS_H_
#ifndef _IRQS_H_
#define _IRQS_H_
/*
* IOP80321 chipset interrupts
......@@ -54,9 +54,7 @@
#define IRQ_IOP321_XINT3 IOP321_IRQ(30)
#define IRQ_IOP321_HPI IOP321_IRQ(31)
#define NR_IOP321_IRQS (IOP321_IRQ(31) + 1)
#define NR_IRQS NR_IOP321_IRQS
#define NR_IRQS (IOP321_IRQ(31) + 1)
/*
......@@ -97,4 +95,4 @@
#define IRQ_IQ31244_INTC IRQ_IOP321_XINT2
#define IRQ_IQ31244_INTD IRQ_IOP321_XINT3
#endif // _IOP321_IRQ_H_
#endif // _IRQ_H_
/*
* linux/include/asm-arm/arch-iop3xx/memory.h
* linux/include/asm-arm/arch-iop32x/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
......@@ -10,11 +10,7 @@
/*
* Physical DRAM offset.
*/
#ifndef CONFIG_ARCH_IOP33X
#define PHYS_OFFSET UL(0xa0000000)
#else
#define PHYS_OFFSET UL(0x00000000)
#endif
/*
* Virtual view <-> PCI DMA view memory address translations
......@@ -23,16 +19,9 @@
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#if defined(CONFIG_ARCH_IOP32X)
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
#elif defined(CONFIG_ARCH_IOP33X)
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
#endif
#endif
/*
* linux/include/asm-arm/arch-iop3xx/system.h
* linux/include/asm-arm/arch-iop32x/system.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
......@@ -16,13 +16,7 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode)
{
#ifdef CONFIG_ARCH_IOP32X
*IOP321_PCSR = 0x30;
#endif
#ifdef CONFIG_ARCH_IOP33X
*IOP331_PCSR = 0x30;
#endif
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
......
/*
* linux/include/asm-arm/arch-iop32x/timex.h
*
* IOP3xx architecture timex specifications
*/
#include <asm/hardware.h>
#define CLOCK_TICK_RATE IOP321_TICK_RATE
/*
* linux/include/asm-arm/arch-iop3xx/uncompress.h
* linux/include/asm-arm/arch-iop32x/uncompress.h
*/
#include <asm/types.h>
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
#include <asm/hardware.h>
#ifdef CONFIG_ARCH_IOP32X
#define UTYPE unsigned char *
#elif defined(CONFIG_ARCH_IOP33X)
#define UTYPE u32 *
#else
#error "Missing IOP3xx arch type def"
#endif
static volatile UTYPE uart_base;
static volatile u8 *uart_base;
#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
......@@ -31,14 +23,12 @@ static inline void flush(void)
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
if(machine_is_iq80321())
uart_base = (volatile UTYPE)IQ80321_UART;
else if(machine_is_iq31244())
uart_base = (volatile UTYPE)IQ31244_UART;
else if(machine_is_iq80331() || machine_is_iq80332())
uart_base = (volatile UTYPE)IOP331_UART0_PHYS;
if (machine_is_iq80321())
uart_base = (volatile u8 *)IQ80321_UART;
else if (machine_is_iq31244())
uart_base = (volatile u8 *)IQ31244_UART;
else
uart_base = (volatile UTYPE)0xfe800000;
uart_base = (volatile u8 *)0xfe800000;
}
/*
......
/*
* linux/include/asm-arm/arch-iop3xx/vmalloc.h
* linux/include/asm-arm/arch-iop32x/vmalloc.h
*/
/*
......
/* linux/include/asm-arm/arch-iop33x/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
movne \rx, #0xfe000000 @ virtual
orr \rx, \rx, #0x00ff0000
orr \rx, \rx, #0x0000f700
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-iop3xx/irqs.h
* linux/include/asm-arm/arch-iop33x/dma.h
*
* Copyright: (C) 2001-2003 MontaVista Software Inc.
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
/*
* Chipset-specific bits
*/
#ifdef CONFIG_ARCH_IOP32X
#include "iop321-irqs.h"
#endif
#ifdef CONFIG_ARCH_IOP33X
#include "iop331-irqs.h"
#endif
/*
* include/asm-arm/arch-iop3xx/entry-macro.S
* include/asm-arm/arch-iop33x/entry-macro.S
*
* Low-level IRQ helper macros for IOP3xx-based platforms
* Low-level IRQ helper macros for IOP33x-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......@@ -9,26 +9,6 @@
*/
#include <asm/arch/irqs.h>
#if defined(CONFIG_ARCH_IOP32X)
.macro disable_fiq
.endm
/*
* Note: only deal with normal interrupts, not FIQ
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
cmp \irqstat, #0
beq 1001f
clz \irqnr, \irqstat
mov \base, #31
subs \irqnr,\base,\irqnr
add \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT
1001:
.endm
#elif defined(CONFIG_ARCH_IOP33X)
.macro disable_fiq
.endm
......@@ -52,6 +32,3 @@
add \irqnr,\irqnr,#IRQ_IOP331_DMA0_EOT
1001:
.endm
#endif
/*
* linux/include/asm-arm/arch-iop33x/hardware.h
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/types.h>
/*
* Note about PCI IO space mappings
*
* To make IO space accesses efficient, we store virtual addresses in
* the IO resources.
*
* The PCI IO space is located at virtual 0xfe000000 from physical
* 0x90000000. The PCI BARs must be programmed with physical addresses,
* but when we read them, we convert them to virtual addresses. See
* arch/arm/mach-iop33x/pci.c
*/
#define pcibios_assign_all_busses() 1
/*
* The min PCI I/O and MEM space are dependent on what specific
* chipset/platform we are running on, so instead of hardcoding with
* #ifdefs, we just fill these in the platform level PCI init code.
*/
#ifndef __ASSEMBLY__
extern unsigned long iop3xx_pcibios_min_io;
extern unsigned long iop3xx_pcibios_min_mem;
extern unsigned int processor_id;
#endif
/*
* We just set these to zero since they are really bogus anyways
*/
#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io)
#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem)
/*
* Generic chipset bits
*
*/
#include "iop331.h"
/*
* Board specific bits
*/
#include "iq80331.h"
#include "iq80332.h"
#endif /* _ASM_ARCH_HARDWARE_H */
/*
* linux/include/asm-arm/arch-iop33x/io.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)(p))
#define __mem_pci(a) (a)
#endif
/*
* linux/include/asm/arch-iop3xx/iop331.h
* linux/include/asm/arch-iop33x/iop331.h
*
* Intel IOP331 Chip definitions
*
......@@ -20,12 +20,7 @@
* IOP3xx variants but behave slightly differently on each.
*/
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_IOP33X
/*#define iop_is_331() ((processor_id & 0xffffffb0) == 0x69054090) */
#define iop_is_331() ((processor_id & 0xffffff30) == 0x69054010)
#else
#define iop_is_331() 0
#endif
#define iop_is_331() 1
#endif
/*
......
/*
* linux/include/asm/arch-iop3xx/iq80331.h
* linux/include/asm/arch-iop33x/iq80331.h
*
* Intel IQ80331 evaluation board registers
*/
......
/*
* linux/include/asm/arch-iop3xx/iq80332.h
* linux/include/asm/arch-iop33x/iq80332.h
*
* Intel IQ80332 evaluation board registers
*/
......
/*
* linux/include/asm-arm/arch-iop3xx/irqs.h
* linux/include/asm-arm/arch-iop33x/irqs.h
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright: (C) 2003 Intel Corp.
......@@ -9,8 +9,8 @@
* published by the Free Software Foundation.
*
*/
#ifndef _IOP331_IRQS_H_
#define _IOP331_IRQS_H_
#ifndef _IRQS_H_
#define _IRQS_H_
/*
* IOP80331 chipset interrupts
......@@ -86,9 +86,7 @@
#define IRQ_IOP331_MSG_ERR IOP331_IRQ(62) // 30
#define IRQ_IOP331_HPI IOP331_IRQ(63) // 31
#define NR_IOP331_IRQS (IOP331_IRQ(63) + 1)
#define NR_IRQS NR_IOP331_IRQS
#define NR_IRQS (IOP331_IRQ(63) + 1)
/*
......@@ -129,4 +127,4 @@
#define IRQ_IQ80332_INTC IRQ_IOP331_XINT2
#define IRQ_IQ80332_INTD IRQ_IOP331_XINT3
#endif // _IOP331_IRQ_H_
#endif // _IRQ_H_
/*
* linux/include/asm-arm/arch-iop33x/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#include <asm/hardware.h>
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
/*
* Virtual view <-> PCI DMA view memory address translations
* virt_to_bus: Used to translate the virtual address to an
* address suitable to be passed to set_dma_addr
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
#endif
/*
* linux/include/asm-arm/arch-iop33x/system.h
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
*IOP331_PCSR = 0x30;
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
cpu_reset(0);
} else {
/* No on-chip reset capability */
cpu_reset(0);
}
}
/*
* linux/include/asm-arm/arch-iop33x/timex.h
*
* IOP3xx architecture timex specifications
*/
#include <asm/hardware.h>
#define CLOCK_TICK_RATE IOP331_TICK_RATE
/*
* linux/include/asm-arm/arch-iop33x/uncompress.h
*/
#include <asm/types.h>
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
#include <asm/hardware.h>
static volatile u32 *uart_base;
#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
static inline void putc(char c)
{
while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
barrier();
*uart_base = c;
}
static inline void flush(void)
{
}
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
if (machine_is_iq80331() || machine_is_iq80332())
uart_base = (volatile u32 *)IOP331_UART0_PHYS;
else
uart_base = (volatile u32 *)0xfe800000;
}
/*
* nothing to do
*/
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
#define arch_decomp_wdog()
/*
* linux/include/asm-arm/arch-iop33x/vmalloc.h
*/
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
//#define VMALLOC_END (0xe8000000)
/* increase usable physical RAM to ~992M per RMK */
#define VMALLOC_END (0xfe000000)
/*
* linux/include/asm-arm/arch-iop3xx/timex.h
*
* IOP3xx architecture timex specifications
*/
#include <asm/hardware.h>
#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
#define CLOCK_TICK_RATE IOP321_TICK_RATE
#elif defined(CONFIG_ARCH_IQ80331) || defined(CONFIG_MACH_IQ80332)
#define CLOCK_TICK_RATE IOP331_TICK_RATE
#else
#error "No IOP3xx timex information for this architecture"
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment