pcmcia: sa1111: fix propagation of lowlevel board init return code

When testing Lubbock, it was noticed that the sa1111 pcmcia driver bound
but was not functional due to no sockets being registered.  This is
because the return code from the lowlevel board initialisation was not
being propagated out of the probe function.  Fix this.
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drivers/pcmcia/sa1111_badge4.c

@@ -134,20 +134,14 @@ static struct pcmcia_low_level badge4_pcmcia_ops = {
 
 int pcmcia_badge4_init(struct sa1111_dev *dev)
 {
-	int ret = -ENODEV;
-
-	if (machine_is_badge4()) {
 	printk(KERN_INFO
 	       "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
 	       __func__,
 	       badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
 
 	sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
-		ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
+	return sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
 				 sa11xx_drv_pcmcia_add_one);
-	}
-
-	return ret;
 }
 
 static int __init pcmv_setup(char *s)

drivers/pcmcia/sa1111_generic.c

@@ -18,6 +18,7 @@
 
 #include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
 #include <asm/irq.h>
 
 #include "sa1111_generic.h"
@@ -203,19 +204,30 @@ static int pcmcia_probe(struct sa1111_dev *dev)
 	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
 	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
 
+	ret = -ENODEV;
 #ifdef CONFIG_SA1100_BADGE4
-	pcmcia_badge4_init(dev);
+	if (machine_is_badge4())
+		ret = pcmcia_badge4_init(dev);
 #endif
 #ifdef CONFIG_SA1100_JORNADA720
-	pcmcia_jornada720_init(dev);
+	if (machine_is_jornada720())
+		ret = pcmcia_jornada720_init(dev);
 #endif
 #ifdef CONFIG_ARCH_LUBBOCK
-	pcmcia_lubbock_init(dev);
+	if (machine_is_lubbock())
+		ret = pcmcia_lubbock_init(dev);
 #endif
 #ifdef CONFIG_ASSABET_NEPONSET
-	pcmcia_neponset_init(dev);
+	if (machine_is_assabet())
+		ret = pcmcia_neponset_init(dev);
 #endif
-	return 0;
+
+	if (ret) {
+		release_mem_region(dev->res.start, 512);
+		sa1111_disable_device(dev);
+	}
+
+	return ret;
 }
 
 static int pcmcia_remove(struct sa1111_dev *dev)

drivers/pcmcia/sa1111_jornada720.c

@@ -94,11 +94,9 @@ static struct pcmcia_low_level jornada720_pcmcia_ops = {
 
 int pcmcia_jornada720_init(struct sa1111_dev *sadev)
 {
-	int ret = -ENODEV;
-
-	if (machine_is_jornada720()) {
 	unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
 
+	/* Fixme: why messing around with SA11x0's GPIO1? */
 	GRER |= 0x00000002;
 
 	/* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
@@ -107,9 +105,6 @@ int pcmcia_jornada720_init(struct sa1111_dev *sadev)
 	sa1111_set_sleep_io(sadev, pin, 0);
 
 	sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
-		ret = sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops,
+	return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops,
 				 sa11xx_drv_pcmcia_add_one);
-	}
-
-	return ret;
 }

drivers/pcmcia/sa1111_lubbock.c

@@ -210,9 +210,6 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = {
 
 int pcmcia_lubbock_init(struct sa1111_dev *sadev)
 {
-	int ret = -ENODEV;
-
-	if (machine_is_lubbock()) {
 	/*
 	 * Set GPIO_A<3:0> to be outputs for the MAX1600,
 	 * and switch to standby mode.
@@ -226,11 +223,8 @@ int pcmcia_lubbock_init(struct sa1111_dev *sadev)
 
 	pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
 	pxa2xx_configure_sockets(&sadev->dev);
-		ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
+	return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
 				 pxa2xx_drv_pcmcia_add_one);
-	}
-
-	return ret;
 }
 
 MODULE_LICENSE("GPL");

drivers/pcmcia/sa1111_neponset.c

@@ -110,9 +110,6 @@ static struct pcmcia_low_level neponset_pcmcia_ops = {
 
 int pcmcia_neponset_init(struct sa1111_dev *sadev)
 {
-	int ret = -ENODEV;
-
-	if (machine_is_assabet()) {
 	/*
 	 * Set GPIO_A<3:0> to be outputs for the MAX1600,
 	 * and switch to standby mode.
@@ -121,9 +118,6 @@ int pcmcia_neponset_init(struct sa1111_dev *sadev)
 	sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
 	sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
 	sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
-		ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+	return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
 				 sa11xx_drv_pcmcia_add_one);
-	}
-
-	return ret;
 }