Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

   - Add new Hisilicon NAND driver for Hip04
   - Add default reboot handler, to ensure all outstanding erase
     transactions complete in time
   - jz4740: convert to use GPIO descriptor API
   - Atmel: add support for sama5d4
   - Change default bitflip threshold to 75% of correction strength
   - Miscellaneous cleanups and bugfixes

  SPI NOR:

   - Freescale QuadSPI:
   - Fix a few probe() and remove() issues
   - Add a MAINTAINERS entry for this driver
   - Tweak transfer size to increase read performance
   - Add suspend/resume support
   - Add Micron quad I/O support
   - ST FSM SPI: miscellaneous fixes

  JFFS2:

   - gracefully handle corrupted 'offset' field found on flash

  Other:

   - bcm47xxpart: add tweaks for a few new devices
   - mtdconcat: set return lengths properly for mtd_write_oob()
   - map_ram: enable use with mtdoops
   - maps: support fallback to ROM/UBI for write-protected NOR flash"

* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
  mtd: hisilicon: && vs & typo
  jffs2: fix handling of corrupted summary length
  mtd: hisilicon: add device tree binding documentation
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: avoid registering reboot notifier twice
  mtd: concat: set the return lengths properly
  mtd: kconfig: replace PPC_OF with PPC
  mtd: denali: remove unnecessary stubs
  mtd: nand: remove redundant local variable
  MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
  mtd: fsl-quadspi: improve read performance by increase AHB transfer size
  mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
  mtd: fsl-quadspi: Remove unneeded success/error messages
  mtd: fsl-quadspi: Fix the error paths
  mtd: nand: omap: drop condition with no effect
  mtd: nand: jz4740: Convert to GPIO descriptor API
  mtd: nand: Request strength instead of bytes for soft BCH
  mtd: nand: default bitflip-reporting threshold to 75% of correction strength
  mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
  mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
  ...

Documentation/devicetree/bindings/mtd/atmel-nand.txt

 Atmel NAND flash
 
 Required properties:
-- compatible : "atmel,at91rm9200-nand".
+- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
 - reg : should specify localbus address and size used for the chip,
 	and hardware ECC controller if available.
 	If the hardware ECC is PMECC, it should contain address and size for

Documentation/devicetree/bindings/mtd/fsl-quadspi.txt

 * Freescale Quad Serial Peripheral Interface(QuadSPI)
 
 Required properties:
-  - compatible : Should be "fsl,vf610-qspi"
+  - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"

Documentation/devicetree/bindings/mtd/gpmi-nand.txt

 * Freescale General-Purpose Media Interface (GPMI)
 
 The GPMI nand controller provides an interface to control the
-NAND flash chips. We support only one NAND chip now.
+NAND flash chips.
 
 Required properties:
   - compatible : should be "fsl,<chip>-gpmi-nand"

Documentation/devicetree/bindings/mtd/hisi504-nand.txt

+Hisilicon Hip04 Soc NAND controller DT binding
+
+Required properties:
+
+- compatible:          Should be "hisilicon,504-nfc".
+- reg:                 The first contains base physical address and size of
+                       NAND controller's registers. The second contains base
+                       physical address and size of NAND controller's buffer.
+- interrupts:          Interrupt number for nfc.
+- nand-bus-width:      See nand.txt.
+- nand-ecc-mode:       Support none and hw ecc mode.
+- #address-cells:      Partition address, should be set 1.
+- #size-cells:         Partition size, should be set 1.
+
+Optional properties:
+
+- nand-ecc-strength:   Number of bits to correct per ECC step.
+- nand-ecc-step-size:  Number of data bytes covered by a single ECC step.
+
+The following ECC strength and step size are currently supported:
+
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
+
+Flash chip may optionally contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail.
+
+Example:
+
+	nand: nand@4020000 {
+		compatible = "hisilicon,504-nfc";
+		reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+		interrupts = <0 379 4>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "nand_text";
+			reg = <0x00000000 0x00400000>;
+		};
+
+		...
+
+	};

Documentation/devicetree/bindings/mtd/mtd-physmap.txt

@@ -36,6 +36,11 @@ are defined:
  - vendor-id : Contains the flash chip's vendor id (1 byte).
  - device-id : Contains the flash chip's device id (1 byte).
 
+For ROM compatible devices (and ROM fallback from cfi-flash), the following
+additional (optional) property is defined:
+
+ - erase-size : The chip's physical erase block size in bytes.
+
 The device tree may optionally contain sub-nodes describing partitions of the
 address space. See partition.txt for more detail.
 

MAINTAINERS

@@ -4092,6 +4092,12 @@ S:	Maintained
 F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
 
+FREESCALE QUAD SPI DRIVER
+M:	Han Xu <han.xu@freescale.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/spi-nor/fsl-quadspi.c
+
 FREESCALE SOC FS_ENET DRIVER
 M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>
 M:	Vitaly Bordug <vbordug@ru.mvista.com>

arch/mips/include/asm/mach-jz4740/jz4740_nand.h

@@ -27,8 +27,6 @@ struct jz_nand_platform_data {
 
 	struct nand_ecclayout	*ecc_layout;
 
-	unsigned int busy_gpio;
-
 	unsigned char banks[JZ_NAND_NUM_BANKS];
 
 	void (*ident_callback)(struct platform_device *, struct nand_chip *,

arch/mips/jz4740/board-qi_lb60.c

@@ -140,10 +140,18 @@ static void qi_lb60_nand_ident(struct platform_device *pdev,
 
 static struct jz_nand_platform_data qi_lb60_nand_pdata = {
 	.ident_callback = qi_lb60_nand_ident,
-	.busy_gpio = 94,
 	.banks = { 1 },
 };
 
+static struct gpiod_lookup_table qi_lb60_nand_gpio_table = {
+	.dev_id = "jz4740-nand.0",
+	.table = {
+		GPIO_LOOKUP("Bank C", 30, "busy", 0),
+		{ },
+	},
+};
+
+
 /* Keyboard*/
 
 #define KEY_QI_QI	KEY_F13
@@ -472,6 +480,7 @@ static int __init qi_lb60_init_platform_devices(void)
 	jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
 
 	gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
+	gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
 
 	jz4740_serial_device_register();
 

drivers/mtd/bcm47xxpart.c

@@ -15,6 +15,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <uapi/linux/magic.h>
+
 /*
  * NAND flash on Netgear R6250 was verified to contain 15 partitions.
  * This will result in allocating too big array for some old devices, but the
@@ -39,7 +41,8 @@
 #define ML_MAGIC1			0x39685a42
 #define ML_MAGIC2			0x26594131
 #define TRX_MAGIC			0x30524448
-#define SQSH_MAGIC			0x71736873	/* shsq */
+#define SHSQ_MAGIC			0x71736873	/* shsq (weird ZTE H218N endianness) */
+#define UBI_EC_MAGIC			0x23494255	/* UBI# */
 
 struct trx_header {
 	uint32_t magic;
@@ -50,7 +53,7 @@ struct trx_header {
 	uint32_t offset[3];
 } __packed;
 
-static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
+static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name,
 				 u64 offset, uint32_t mask_flags)
 {
 	part->name = name;
@@ -58,6 +61,26 @@ static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
 	part->mask_flags = mask_flags;
 }
 
+static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
+						  size_t offset)
+{
+	uint32_t buf;
+	size_t bytes_read;
+
+	if (mtd_read(master, offset, sizeof(buf), &bytes_read,
+		     (uint8_t *)&buf) < 0) {
+		pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+			offset);
+		goto out_default;
+	}
+
+	if (buf == UBI_EC_MAGIC)
+		return "ubi";
+
+out_default:
+	return "rootfs";
+}
+
 static int bcm47xxpart_parse(struct mtd_info *master,
 			     struct mtd_partition **pparts,
 			     struct mtd_part_parser_data *data)
@@ -73,8 +96,12 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 	int last_trx_part = -1;
 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
 
-	if (blocksize <= 0x10000)
-		blocksize = 0x10000;
+	/*
+	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
+	 * partitions were aligned to at least 0x1000 anyway.
+	 */
+	if (blocksize < 0x1000)
+		blocksize = 0x1000;
 
 	/* Alloc */
 	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
@@ -186,8 +213,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 			 * we want to have jffs2 (overlay) in the same mtd.
 			 */
 			if (trx->offset[i]) {
+				const char *name;
+
+				name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
 				bcm47xxpart_add_part(&parts[curr_part++],
-						     "rootfs",
+						     name,
 						     offset + trx->offset[i],
 						     0);
 				i++;
@@ -205,7 +235,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
 		}
 
 		/* Squashfs on devices not using TRX */
-		if (buf[0x000 / 4] == SQSH_MAGIC) {
+		if (le32_to_cpu(buf[0x000 / 4]) == SQUASHFS_MAGIC ||
+		    buf[0x000 / 4] == SHSQ_MAGIC) {
 			bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
 					     offset, 0);
 			continue;

drivers/mtd/chips/map_ram.c

@@ -68,6 +68,7 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
 	mtd->_get_unmapped_area = mapram_unmapped_area;
 	mtd->_read = mapram_read;
 	mtd->_write = mapram_write;
+	mtd->_panic_write = mapram_write;
 	mtd->_sync = mapram_nop;
 	mtd->flags = MTD_CAP_RAM;
 	mtd->writesize = 1;

drivers/mtd/chips/map_rom.c

@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 
@@ -28,6 +29,15 @@ static struct mtd_chip_driver maprom_chipdrv = {
 	.module	= THIS_MODULE
 };
 
+static unsigned int default_erasesize(struct map_info *map)
+{
+	const __be32 *erase_size = NULL;
+
+	erase_size = of_get_property(map->device_node, "erase-size", NULL);
+
+	return !erase_size ? map->size : be32_to_cpu(*erase_size);
+}
+
 static struct mtd_info *map_rom_probe(struct map_info *map)
 {
 	struct mtd_info *mtd;
@@ -47,8 +57,9 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
 	mtd->_sync = maprom_nop;
 	mtd->_erase = maprom_erase;
 	mtd->flags = MTD_CAP_ROM;
-	mtd->erasesize = map->size;
+	mtd->erasesize = default_erasesize(map);
 	mtd->writesize = 1;
+	mtd->writebufsize = 1;
 
 	__module_get(THIS_MODULE);
 	return mtd;

drivers/mtd/devices/st_spi_fsm.c

@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/clk.h>
 
 #include "serial_flash_cmds.h"
 
@@ -262,6 +263,7 @@ struct stfsm {
 	struct mtd_info		mtd;
 	struct mutex		lock;
 	struct flash_info       *info;
+	struct clk              *clk;
 
 	uint32_t                configuration;
 	uint32_t                fifo_dir_delay;
@@ -663,6 +665,23 @@ static struct stfsm_seq stfsm_seq_write_status = {
 		    SEQ_CFG_STARTSEQ),
 };
 
+/* Dummy sequence to read one byte of data from flash into the FIFO */
+static const struct stfsm_seq stfsm_seq_load_fifo_byte = {
+	.data_size = TRANSFER_SIZE(1),
+	.seq_opc[0] = (SEQ_OPC_PADS_1 |
+		       SEQ_OPC_CYCLES(8) |
+		       SEQ_OPC_OPCODE(SPINOR_OP_RDID)),
+	.seq = {
+		STFSM_INST_CMD1,
+		STFSM_INST_DATA_READ,
+		STFSM_INST_STOP,
+	},
+	.seq_cfg = (SEQ_CFG_PADS_1 |
+		    SEQ_CFG_READNOTWRITE |
+		    SEQ_CFG_CSDEASSERT |
+		    SEQ_CFG_STARTSEQ),
+};
+
 static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
 {
 	seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
@@ -695,22 +714,6 @@ static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
 	return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
 }
 
-static void stfsm_clear_fifo(struct stfsm *fsm)
-{
-	uint32_t avail;
-
-	for (;;) {
-		avail = stfsm_fifo_available(fsm);
-		if (!avail)
-			break;
-
-		while (avail) {
-			readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
-			avail--;
-		}
-	}
-}
-
 static inline void stfsm_load_seq(struct stfsm *fsm,
 				  const struct stfsm_seq *seq)
 {
@@ -772,6 +775,68 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size)
 	}
 }
 
+/*
+ * Clear the data FIFO
+ *
+ * Typically, this is only required during driver initialisation, where no
+ * assumptions can be made regarding the state of the FIFO.
+ *
+ * The process of clearing the FIFO is complicated by fact that while it is
+ * possible for the FIFO to contain an arbitrary number of bytes [1], the
+ * SPI_FAST_SEQ_STA register only reports the number of complete 32-bit words
+ * present.  Furthermore, data can only be drained from the FIFO by reading
+ * complete 32-bit words.
+ *
+ * With this in mind, a two stage process is used to the clear the FIFO:
+ *
+ *     1. Read any complete 32-bit words from the FIFO, as reported by the
+ *        SPI_FAST_SEQ_STA register.
+ *
+ *     2. Mop up any remaining bytes.  At this point, it is not known if there
+ *        are 0, 1, 2, or 3 bytes in the FIFO.  To handle all cases, a dummy FSM
+ *        sequence is used to load one byte at a time, until a complete 32-bit
+ *        word is formed; at most, 4 bytes will need to be loaded.
+ *
+ * [1] It is theoretically possible for the FIFO to contain an arbitrary number
+ *     of bits.  However, since there are no known use-cases that leave
+ *     incomplete bytes in the FIFO, only words and bytes are considered here.
+ */
+static void stfsm_clear_fifo(struct stfsm *fsm)
+{
+	const struct stfsm_seq *seq = &stfsm_seq_load_fifo_byte;
+	uint32_t words, i;
+
+	/* 1. Clear any 32-bit words */
+	words = stfsm_fifo_available(fsm);
+	if (words) {
+		for (i = 0; i < words; i++)
+			readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+		dev_dbg(fsm->dev, "cleared %d words from FIFO\n", words);
+	}
+
+	/*
+	 * 2. Clear any remaining bytes
+	 *    - Load the FIFO, one byte at a time, until a complete 32-bit word
+	 *      is available.
+	 */
+	for (i = 0, words = 0; i < 4 && !words; i++) {
+		stfsm_load_seq(fsm, seq);
+		stfsm_wait_seq(fsm);
+		words = stfsm_fifo_available(fsm);
+	}
+
+	/*    - A single word must be available now */
+	if (words != 1) {
+		dev_err(fsm->dev, "failed to clear bytes from the data FIFO\n");
+		return;
+	}
+
+	/*    - Read the 32-bit word */
+	readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
+
+	dev_dbg(fsm->dev, "cleared %d byte(s) from the data FIFO\n", 4 - i);
+}
+
 static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
 			    uint32_t size)
 {
@@ -1521,11 +1586,11 @@ static int stfsm_write(struct stfsm *fsm, const uint8_t *buf,
 	uint32_t size_lb;
 	uint32_t size_mop;
 	uint32_t tmp[4];
+	uint32_t i;
 	uint32_t page_buf[FLASH_PAGESIZE_32];
 	uint8_t *t = (uint8_t *)&tmp;
 	const uint8_t *p;
 	int ret;
-	int i;
 
 	dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset);
 
@@ -1843,8 +1908,7 @@ static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
 	uint32_t emi_freq;
 	uint32_t clk_div;
 
-	/* TODO: Make this dynamic */
-	emi_freq = STFSM_DEFAULT_EMI_FREQ;
+	emi_freq = clk_get_rate(fsm->clk);
 
 	/*
 	 * Calculate clk_div - values between 2 and 128
@@ -1994,6 +2058,18 @@ static int stfsm_probe(struct platform_device *pdev)
 		return PTR_ERR(fsm->base);
 	}
 
+	fsm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(fsm->clk)) {
+		dev_err(fsm->dev, "Couldn't find EMI clock.\n");
+		return PTR_ERR(fsm->clk);
+	}
+
+	ret = clk_prepare_enable(fsm->clk);
+	if (ret) {
+		dev_err(fsm->dev, "Failed to enable EMI clock.\n");
+		return ret;
+	}
+
 	mutex_init(&fsm->lock);
 
 	ret = stfsm_init(fsm);
@@ -2058,6 +2134,28 @@ static int stfsm_remove(struct platform_device *pdev)
 	return mtd_device_unregister(&fsm->mtd);
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int stfsmfsm_suspend(struct device *dev)
+{
+	struct stfsm *fsm = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(fsm->clk);
+
+	return 0;
+}
+
+static int stfsmfsm_resume(struct device *dev)
+{
+	struct stfsm *fsm = dev_get_drvdata(dev);
+
+	clk_prepare_enable(fsm->clk);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stfsm_pm_ops, stfsmfsm_suspend, stfsmfsm_resume);
+
 static const struct of_device_id stfsm_match[] = {
 	{ .compatible = "st,spi-fsm", },
 	{},
@@ -2070,6 +2168,7 @@ static struct platform_driver stfsm_driver = {
 	.driver		= {
 		.name	= "st-spi-fsm",
 		.of_match_table = stfsm_match,
+		.pm     = &stfsm_pm_ops,
 	},
 };
 module_platform_driver(stfsm_driver);

drivers/mtd/maps/physmap_of.c

@@ -269,6 +269,16 @@ static int of_flash_probe(struct platform_device *dev)
 			info->list[i].mtd = obsolete_probe(dev,
 							   &info->list[i].map);
 		}
+
+		/* Fall back to mapping region as ROM */
+		if (!info->list[i].mtd) {
+			dev_warn(&dev->dev,
+				"do_map_probe() failed for type %s\n",
+				 probe_type);
+
+			info->list[i].mtd = do_map_probe("map_rom",
+							 &info->list[i].map);
+		}
 		mtd_list[i] = info->list[i].mtd;
 
 		err = -ENXIO;

drivers/mtd/mtdblock.c

@@ -45,8 +45,6 @@ struct mtdblk_dev {
 	enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
 };
 
-static DEFINE_MUTEX(mtdblks_lock);
-
 /*
  * Cache stuff...
  *
@@ -286,10 +284,8 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
 
 	pr_debug("mtdblock_open\n");
 
-	mutex_lock(&mtdblks_lock);
 	if (mtdblk->count) {
 		mtdblk->count++;
-		mutex_unlock(&mtdblks_lock);
 		return 0;
 	}
 
@@ -302,8 +298,6 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
 		mtdblk->cache_data = NULL;
 	}
 
-	mutex_unlock(&mtdblks_lock);
-
 	pr_debug("ok\n");
 
 	return 0;
@@ -315,8 +309,6 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd)
 
 	pr_debug("mtdblock_release\n");
 
-	mutex_lock(&mtdblks_lock);
-
 	mutex_lock(&mtdblk->cache_mutex);
 	write_cached_data(mtdblk);
 	mutex_unlock(&mtdblk->cache_mutex);
@@ -331,8 +323,6 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd)
 		vfree(mtdblk->cache_data);
 	}
 
-	mutex_unlock(&mtdblks_lock);
-
 	pr_debug("ok\n");
 }
 

drivers/mtd/mtdconcat.c

@@ -311,7 +311,8 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
 			devops.len = subdev->size - to;
 
 		err = mtd_write_oob(subdev, to, &devops);
-		ops->retlen += devops.oobretlen;
+		ops->retlen += devops.retlen;
+		ops->oobretlen += devops.oobretlen;
 		if (err)
 			return err;
 

drivers/mtd/mtdcore.c

@@ -37,6 +37,7 @@
 #include <linux/backing-dev.h>
 #include <linux/gfp.h>
 #include <linux/slab.h>
+#include <linux/reboot.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -356,6 +357,17 @@ unsigned mtd_mmap_capabilities(struct mtd_info *mtd)
 EXPORT_SYMBOL_GPL(mtd_mmap_capabilities);
 #endif
 
+static int mtd_reboot_notifier(struct notifier_block *n, unsigned long state,
+			       void *cmd)
+{
+	struct mtd_info *mtd;
+
+	mtd = container_of(n, struct mtd_info, reboot_notifier);
+	mtd->_reboot(mtd);
+
+	return NOTIFY_DONE;
+}
+
 /**
  *	add_mtd_device - register an MTD device
  *	@mtd: pointer to new MTD device info structure
@@ -544,6 +556,19 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
 			err = -ENODEV;
 	}
 
+	/*
+	 * FIXME: some drivers unfortunately call this function more than once.
+	 * So we have to check if we've already assigned the reboot notifier.
+	 *
+	 * Generally, we can make multiple calls work for most cases, but it
+	 * does cause problems with parse_mtd_partitions() above (e.g.,
+	 * cmdlineparts will register partitions more than once).
+	 */
+	if (mtd->_reboot && !mtd->reboot_notifier.notifier_call) {
+		mtd->reboot_notifier.notifier_call = mtd_reboot_notifier;
+		register_reboot_notifier(&mtd->reboot_notifier);
+	}
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(mtd_device_parse_register);
@@ -558,6 +583,9 @@ int mtd_device_unregister(struct mtd_info *master)
 {
 	int err;
 
+	if (master->_reboot)
+		unregister_reboot_notifier(&master->reboot_notifier);
+
 	err = del_mtd_partitions(master);
 	if (err)
 		return err;

drivers/mtd/nand/Kconfig

@@ -421,7 +421,7 @@ config MTD_NAND_ORION
 
 config MTD_NAND_FSL_ELBC
 	tristate "NAND support for Freescale eLBC controllers"
-	depends on PPC_OF
+	depends on PPC
 	select FSL_LBC
 	help
 	  Various Freescale chips, including the 8313, include a NAND Flash
@@ -524,4 +524,9 @@ config MTD_NAND_SUNXI
 	help
 	  Enables support for NAND Flash chips on Allwinner SoCs.
 
+config MTD_NAND_HISI504
+	tristate "Support for NAND controller on Hisilicon SoC Hip04"
+	help
+	  Enables support for NAND controller on Hisilicon SoC Hip04.
+
 endif # MTD_NAND

drivers/mtd/nand/Makefile

@@ -51,5 +51,6 @@ obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
 obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
 obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
+obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
 
 nand-objs := nand_base.o nand_bbt.o nand_timings.o

drivers/mtd/nand/ams-delta.c

@@ -183,7 +183,7 @@ static int ams_delta_init(struct platform_device *pdev)
 		return -ENXIO;
 
 	/* Allocate memory for MTD device structure and private data */
-	ams_delta_mtd = kmalloc(sizeof(struct mtd_info) +
+	ams_delta_mtd = kzalloc(sizeof(struct mtd_info) +
 				sizeof(struct nand_chip), GFP_KERNEL);
 	if (!ams_delta_mtd) {
 		printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
@@ -196,10 +196,6 @@ static int ams_delta_init(struct platform_device *pdev)
 	/* Get pointer to private data */
 	this = (struct nand_chip *) (&ams_delta_mtd[1]);
 
-	/* Initialize structures */
-	memset(ams_delta_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
 	/* Link the private data with the MTD structure */
 	ams_delta_mtd->priv = this;
 

drivers/mtd/nand/atmel_nand.c

@@ -63,6 +63,10 @@ module_param(on_flash_bbt, int, 0);
 #include "atmel_nand_ecc.h"	/* Hardware ECC registers */
 #include "atmel_nand_nfc.h"	/* Nand Flash Controller definition */
 
+struct atmel_nand_caps {
+	bool pmecc_correct_erase_page;
+};
+
 /* oob layout for large page size
  * bad block info is on bytes 0 and 1
  * the bytes have to be consecutives to avoid
@@ -124,6 +128,7 @@ struct atmel_nand_host {
 
 	struct atmel_nfc	*nfc;
 
+	struct atmel_nand_caps	*caps;
 	bool			has_pmecc;
 	u8			pmecc_corr_cap;
 	u16			pmecc_sector_size;
@@ -847,7 +852,11 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
 	struct atmel_nand_host *host = nand_chip->priv;
 	int i, err_nbr;
 	uint8_t *buf_pos;
-	int total_err = 0;
+	int max_bitflips = 0;
+
+	/* If can correct bitfilps from erased page, do the normal check */
+	if (host->caps->pmecc_correct_erase_page)
+		goto normal_check;
 
 	for (i = 0; i < nand_chip->ecc.total; i++)
 		if (ecc[i] != 0xff)
@@ -874,13 +883,13 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
 				pmecc_correct_data(mtd, buf_pos, ecc, i,
 					nand_chip->ecc.bytes, err_nbr);
 				mtd->ecc_stats.corrected += err_nbr;
-				total_err += err_nbr;
+				max_bitflips = max_t(int, max_bitflips, err_nbr);
 			}
 		}
 		pmecc_stat >>= 1;
 	}
 
-	return total_err;
+	return max_bitflips;
 }
 
 static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
@@ -1474,6 +1483,8 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
 }
 
+static const struct of_device_id atmel_nand_dt_ids[];
+
 static int atmel_of_init_port(struct atmel_nand_host *host,
 			      struct device_node *np)
 {
@@ -1483,6 +1494,9 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
 	struct atmel_nand_data *board = &host->board;
 	enum of_gpio_flags flags = 0;
 
+	host->caps = (struct atmel_nand_caps *)
+		of_match_device(atmel_nand_dt_ids, host->dev)->data;
+
 	if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
 		if (val >= 32) {
 			dev_err(host->dev, "invalid addr-offset %u\n", val);
@@ -2288,8 +2302,17 @@ static int atmel_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct atmel_nand_caps at91rm9200_caps = {
+	.pmecc_correct_erase_page = false,
+};
+
+static struct atmel_nand_caps sama5d4_caps = {
+	.pmecc_correct_erase_page = true,
+};
+
 static const struct of_device_id atmel_nand_dt_ids[] = {
-	{ .compatible = "atmel,at91rm9200-nand" },
+	{ .compatible = "atmel,at91rm9200-nand", .data = &at91rm9200_caps },
+	{ .compatible = "atmel,sama5d4-nand", .data = &sama5d4_caps },
 	{ /* sentinel */ }
 };
 

drivers/mtd/nand/denali.c

@@ -1041,7 +1041,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
 	index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
 
 	/* 3. set memory low address bits 23:8 */
-	index_addr(denali, mode | ((addr & 0xff) << 8), 0x2300);
+	index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
 
 	/* 4. interrupt when complete, burst len = 64 bytes */
 	index_addr(denali, mode | 0x14000, 0x2400);
@@ -1328,35 +1328,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 		break;
 	}
 }
-
-/* stubs for ECC functions not used by the NAND core */
-static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
-				uint8_t *ecc_code)
-{
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-
-	dev_err(denali->dev, "denali_ecc_calculate called unexpectedly\n");
-	BUG();
-	return -EIO;
-}
-
-static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
-				uint8_t *read_ecc, uint8_t *calc_ecc)
-{
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-
-	dev_err(denali->dev, "denali_ecc_correct called unexpectedly\n");
-	BUG();
-	return -EIO;
-}
-
-static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
-{
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-
-	dev_err(denali->dev, "denali_ecc_hwctl called unexpectedly\n");
-	BUG();
-}
 /* end NAND core entry points */
 
 /* Initialization code to bring the device up to a known good state */
@@ -1609,15 +1580,6 @@ int denali_init(struct denali_nand_info *denali)
 	denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift;
 	denali->blksperchip = denali->totalblks / denali->nand.numchips;
 
-	/*
-	 * These functions are required by the NAND core framework, otherwise,
-	 * the NAND core will assert. However, we don't need them, so we'll stub
-	 * them out.
-	 */
-	denali->nand.ecc.calculate = denali_ecc_calculate;
-	denali->nand.ecc.correct = denali_ecc_correct;
-	denali->nand.ecc.hwctl = denali_ecc_hwctl;
-
 	/* override the default read operations */
 	denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
 	denali->nand.ecc.read_page = denali_read_page;

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -1294,14 +1294,6 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
  * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
  * ECC-based or raw view of the page is implicit in which function it calls
  * (there is a similar pair of ECC-based/raw functions for writing).
- *
- * FIXME: The following paragraph is incorrect, now that there exist
- * ecc.read_oob_raw and ecc.write_oob_raw functions.
- *
- * Since MTD assumes the OOB is not covered by ECC, there is no pair of
- * ECC-based/raw functions for reading or or writing the OOB. The fact that the
- * caller wants an ECC-based or raw view of the page is not propagated down to
- * this driver.
  */
 static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 				int page)
@@ -2029,7 +2021,6 @@ static int gpmi_nand_probe(struct platform_device *pdev)
 exit_nfc_init:
 	release_resources(this);
 exit_acquire_resources:
-	dev_err(this->dev, "driver registration failed: %d\n", ret);
 
 	return ret;
 }

drivers/mtd/nand/hisi504_nand.c

+/*
+ * Hisilicon NAND Flash controller driver
+ *
+ * Copyright © 2012-2014 HiSilicon Technologies Co., Ltd.
+ *              http://www.hisilicon.com
+ *
+ * Author: Zhou Wang <wangzhou.bry@gmail.com>
+ * The initial developer of the original code is Zhiyong Cai
+ * <caizhiyong@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/mtd.h>
+#include <linux/sizes.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/nand.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+
+#define HINFC504_MAX_CHIP                               (4)
+#define HINFC504_W_LATCH                                (5)
+#define HINFC504_R_LATCH                                (7)
+#define HINFC504_RW_LATCH                               (3)
+
+#define HINFC504_NFC_TIMEOUT				(2 * HZ)
+#define HINFC504_NFC_PM_TIMEOUT				(1 * HZ)
+#define HINFC504_NFC_DMA_TIMEOUT			(5 * HZ)
+#define HINFC504_CHIP_DELAY				(25)
+
+#define HINFC504_REG_BASE_ADDRESS_LEN			(0x100)
+#define HINFC504_BUFFER_BASE_ADDRESS_LEN		(2048 + 128)
+
+#define HINFC504_ADDR_CYCLE_MASK			0x4
+
+#define HINFC504_CON					0x00
+#define HINFC504_CON_OP_MODE_NORMAL			BIT(0)
+#define HINFC504_CON_PAGEISZE_SHIFT			(1)
+#define HINFC504_CON_PAGESIZE_MASK			(0x07)
+#define HINFC504_CON_BUS_WIDTH				BIT(4)
+#define HINFC504_CON_READY_BUSY_SEL			BIT(8)
+#define HINFC504_CON_ECCTYPE_SHIFT			(9)
+#define HINFC504_CON_ECCTYPE_MASK			(0x07)
+
+#define HINFC504_PWIDTH					0x04
+#define SET_HINFC504_PWIDTH(_w_lcnt, _r_lcnt, _rw_hcnt) \
+	((_w_lcnt) | (((_r_lcnt) & 0x0F) << 4) | (((_rw_hcnt) & 0x0F) << 8))
+
+#define HINFC504_CMD					0x0C
+#define HINFC504_ADDRL					0x10
+#define HINFC504_ADDRH					0x14
+#define HINFC504_DATA_NUM				0x18
+
+#define HINFC504_OP					0x1C
+#define HINFC504_OP_READ_DATA_EN			BIT(1)
+#define HINFC504_OP_WAIT_READY_EN			BIT(2)
+#define HINFC504_OP_CMD2_EN				BIT(3)
+#define HINFC504_OP_WRITE_DATA_EN			BIT(4)
+#define HINFC504_OP_ADDR_EN				BIT(5)
+#define HINFC504_OP_CMD1_EN				BIT(6)
+#define HINFC504_OP_NF_CS_SHIFT                         (7)
+#define HINFC504_OP_NF_CS_MASK				(3)
+#define HINFC504_OP_ADDR_CYCLE_SHIFT			(9)
+#define HINFC504_OP_ADDR_CYCLE_MASK			(7)
+
+#define HINFC504_STATUS                                 0x20
+#define HINFC504_READY					BIT(0)
+
+#define HINFC504_INTEN					0x24
+#define HINFC504_INTEN_DMA				BIT(9)
+#define HINFC504_INTEN_UE				BIT(6)
+#define HINFC504_INTEN_CE				BIT(5)
+
+#define HINFC504_INTS					0x28
+#define HINFC504_INTS_DMA				BIT(9)
+#define HINFC504_INTS_UE				BIT(6)
+#define HINFC504_INTS_CE				BIT(5)
+
+#define HINFC504_INTCLR                                 0x2C
+#define HINFC504_INTCLR_DMA				BIT(9)
+#define HINFC504_INTCLR_UE				BIT(6)
+#define HINFC504_INTCLR_CE				BIT(5)
+
+#define HINFC504_ECC_STATUS                             0x5C
+#define HINFC504_ECC_16_BIT_SHIFT                       12
+
+#define HINFC504_DMA_CTRL				0x60
+#define HINFC504_DMA_CTRL_DMA_START			BIT(0)
+#define HINFC504_DMA_CTRL_WE				BIT(1)
+#define HINFC504_DMA_CTRL_DATA_AREA_EN			BIT(2)
+#define HINFC504_DMA_CTRL_OOB_AREA_EN			BIT(3)
+#define HINFC504_DMA_CTRL_BURST4_EN			BIT(4)
+#define HINFC504_DMA_CTRL_BURST8_EN			BIT(5)
+#define HINFC504_DMA_CTRL_BURST16_EN			BIT(6)
+#define HINFC504_DMA_CTRL_ADDR_NUM_SHIFT		(7)
+#define HINFC504_DMA_CTRL_ADDR_NUM_MASK                 (1)
+#define HINFC504_DMA_CTRL_CS_SHIFT			(8)
+#define HINFC504_DMA_CTRL_CS_MASK			(0x03)
+
+#define HINFC504_DMA_ADDR_DATA				0x64
+#define HINFC504_DMA_ADDR_OOB				0x68
+
+#define HINFC504_DMA_LEN				0x6C
+#define HINFC504_DMA_LEN_OOB_SHIFT			(16)
+#define HINFC504_DMA_LEN_OOB_MASK			(0xFFF)
+
+#define HINFC504_DMA_PARA				0x70
+#define HINFC504_DMA_PARA_DATA_RW_EN			BIT(0)
+#define HINFC504_DMA_PARA_OOB_RW_EN			BIT(1)
+#define HINFC504_DMA_PARA_DATA_EDC_EN			BIT(2)
+#define HINFC504_DMA_PARA_OOB_EDC_EN			BIT(3)
+#define HINFC504_DMA_PARA_DATA_ECC_EN			BIT(4)
+#define HINFC504_DMA_PARA_OOB_ECC_EN			BIT(5)
+
+#define HINFC_VERSION                                   0x74
+#define HINFC504_LOG_READ_ADDR				0x7C
+#define HINFC504_LOG_READ_LEN				0x80
+
+#define HINFC504_NANDINFO_LEN				0x10
+
+struct hinfc_host {
+	struct nand_chip	chip;
+	struct mtd_info		mtd;
+	struct device		*dev;
+	void __iomem		*iobase;
+	void __iomem		*mmio;
+	struct completion       cmd_complete;
+	unsigned int		offset;
+	unsigned int		command;
+	int			chipselect;
+	unsigned int		addr_cycle;
+	u32                     addr_value[2];
+	u32                     cache_addr_value[2];
+	char			*buffer;
+	dma_addr_t		dma_buffer;
+	dma_addr_t		dma_oob;
+	int			version;
+	unsigned int            irq_status; /* interrupt status */
+};
+
+static inline unsigned int hinfc_read(struct hinfc_host *host, unsigned int reg)
+{
+	return readl(host->iobase + reg);
+}
+
+static inline void hinfc_write(struct hinfc_host *host, unsigned int value,
+			       unsigned int reg)
+{
+	writel(value, host->iobase + reg);
+}
+
+static void wait_controller_finished(struct hinfc_host *host)
+{
+	unsigned long timeout = jiffies + HINFC504_NFC_TIMEOUT;
+	int val;
+
+	while (time_before(jiffies, timeout)) {
+		val = hinfc_read(host, HINFC504_STATUS);
+		if (host->command == NAND_CMD_ERASE2) {
+			/* nfc is ready */
+			while (!(val & HINFC504_READY))	{
+				usleep_range(500, 1000);
+				val = hinfc_read(host, HINFC504_STATUS);
+			}
+			return;
+		}
+
+		if (val & HINFC504_READY)
+			return;
+	}
+
+	/* wait cmd timeout */
+	dev_err(host->dev, "Wait NAND controller exec cmd timeout.\n");
+}
+
+static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
+{
+	struct mtd_info	*mtd = &host->mtd;
+	struct nand_chip *chip = mtd->priv;
+	unsigned long val;
+	int ret;
+
+	hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
+	hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
+
+	if (chip->ecc.mode == NAND_ECC_NONE) {
+		hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
+			<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
+
+		hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
+			| HINFC504_DMA_PARA_OOB_RW_EN, HINFC504_DMA_PARA);
+	} else {
+		if (host->command == NAND_CMD_READOOB)
+			hinfc_write(host, HINFC504_DMA_PARA_OOB_RW_EN
+			| HINFC504_DMA_PARA_OOB_EDC_EN
+			| HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA);
+		else
+			hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
+			| HINFC504_DMA_PARA_OOB_RW_EN
+			| HINFC504_DMA_PARA_DATA_EDC_EN
+			| HINFC504_DMA_PARA_OOB_EDC_EN
+			| HINFC504_DMA_PARA_DATA_ECC_EN
+			| HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA);
+
+	}
+
+	val = (HINFC504_DMA_CTRL_DMA_START | HINFC504_DMA_CTRL_BURST4_EN
+		| HINFC504_DMA_CTRL_BURST8_EN | HINFC504_DMA_CTRL_BURST16_EN
+		| HINFC504_DMA_CTRL_DATA_AREA_EN | HINFC504_DMA_CTRL_OOB_AREA_EN
+		| ((host->addr_cycle == 4 ? 1 : 0)
+			<< HINFC504_DMA_CTRL_ADDR_NUM_SHIFT)
+		| ((host->chipselect & HINFC504_DMA_CTRL_CS_MASK)
+			<< HINFC504_DMA_CTRL_CS_SHIFT));
+
+	if (todev)
+		val |= HINFC504_DMA_CTRL_WE;
+
+	init_completion(&host->cmd_complete);
+
+	hinfc_write(host, val, HINFC504_DMA_CTRL);
+	ret = wait_for_completion_timeout(&host->cmd_complete,
+			HINFC504_NFC_DMA_TIMEOUT);
+
+	if (!ret) {
+		dev_err(host->dev, "DMA operation(irq) timeout!\n");
+		/* sanity check */
+		val = hinfc_read(host, HINFC504_DMA_CTRL);
+		if (!(val & HINFC504_DMA_CTRL_DMA_START))
+			dev_err(host->dev, "DMA is already done but without irq ACK!\n");
+		else
+			dev_err(host->dev, "DMA is really timeout!\n");
+	}
+}
+
+static int hisi_nfc_send_cmd_pageprog(struct hinfc_host *host)
+{
+	host->addr_value[0] &= 0xffff0000;
+
+	hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
+	hinfc_write(host, host->addr_value[1], HINFC504_ADDRH);
+	hinfc_write(host, NAND_CMD_PAGEPROG << 8 | NAND_CMD_SEQIN,
+		    HINFC504_CMD);
+
+	hisi_nfc_dma_transfer(host, 1);
+
+	return 0;
+}
+
+static int hisi_nfc_send_cmd_readstart(struct hinfc_host *host)
+{
+	struct mtd_info	*mtd = &host->mtd;
+
+	if ((host->addr_value[0] == host->cache_addr_value[0]) &&
+	    (host->addr_value[1] == host->cache_addr_value[1]))
+		return 0;
+
+	host->addr_value[0] &= 0xffff0000;
+
+	hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
+	hinfc_write(host, host->addr_value[1], HINFC504_ADDRH);
+	hinfc_write(host, NAND_CMD_READSTART << 8 | NAND_CMD_READ0,
+		    HINFC504_CMD);
+
+	hinfc_write(host, 0, HINFC504_LOG_READ_ADDR);
+	hinfc_write(host, mtd->writesize + mtd->oobsize,
+		    HINFC504_LOG_READ_LEN);
+
+	hisi_nfc_dma_transfer(host, 0);
+
+	host->cache_addr_value[0] = host->addr_value[0];
+	host->cache_addr_value[1] = host->addr_value[1];
+
+	return 0;
+}
+
+static int hisi_nfc_send_cmd_erase(struct hinfc_host *host)
+{
+	hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
+	hinfc_write(host, (NAND_CMD_ERASE2 << 8) | NAND_CMD_ERASE1,
+		    HINFC504_CMD);
+
+	hinfc_write(host, HINFC504_OP_WAIT_READY_EN
+		| HINFC504_OP_CMD2_EN
+		| HINFC504_OP_CMD1_EN
+		| HINFC504_OP_ADDR_EN
+		| ((host->chipselect & HINFC504_OP_NF_CS_MASK)
+			<< HINFC504_OP_NF_CS_SHIFT)
+		| ((host->addr_cycle & HINFC504_OP_ADDR_CYCLE_MASK)
+			<< HINFC504_OP_ADDR_CYCLE_SHIFT),
+		HINFC504_OP);
+
+	wait_controller_finished(host);
+
+	return 0;
+}
+
+static int hisi_nfc_send_cmd_readid(struct hinfc_host *host)
+{
+	hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM);
+	hinfc_write(host, NAND_CMD_READID, HINFC504_CMD);
+	hinfc_write(host, 0, HINFC504_ADDRL);
+
+	hinfc_write(host, HINFC504_OP_CMD1_EN | HINFC504_OP_ADDR_EN
+		| HINFC504_OP_READ_DATA_EN
+		| ((host->chipselect & HINFC504_OP_NF_CS_MASK)
+			<< HINFC504_OP_NF_CS_SHIFT)
+		| 1 << HINFC504_OP_ADDR_CYCLE_SHIFT, HINFC504_OP);
+
+	wait_controller_finished(host);
+
+	return 0;
+}
+
+static int hisi_nfc_send_cmd_status(struct hinfc_host *host)
+{
+	hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM);
+	hinfc_write(host, NAND_CMD_STATUS, HINFC504_CMD);
+	hinfc_write(host, HINFC504_OP_CMD1_EN
+		| HINFC504_OP_READ_DATA_EN
+		| ((host->chipselect & HINFC504_OP_NF_CS_MASK)
+			<< HINFC504_OP_NF_CS_SHIFT),
+		HINFC504_OP);
+
+	wait_controller_finished(host);
+
+	return 0;
+}
+
+static int hisi_nfc_send_cmd_reset(struct hinfc_host *host, int chipselect)
+{
+	hinfc_write(host, NAND_CMD_RESET, HINFC504_CMD);
+
+	hinfc_write(host, HINFC504_OP_CMD1_EN
+		| ((chipselect & HINFC504_OP_NF_CS_MASK)
+			<< HINFC504_OP_NF_CS_SHIFT)
+		| HINFC504_OP_WAIT_READY_EN,
+		HINFC504_OP);
+
+	wait_controller_finished(host);
+
+	return 0;
+}
+
+static void hisi_nfc_select_chip(struct mtd_info *mtd, int chipselect)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+
+	if (chipselect < 0)
+		return;
+
+	host->chipselect = chipselect;
+}
+
+static uint8_t hisi_nfc_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+
+	if (host->command == NAND_CMD_STATUS)
+		return *(uint8_t *)(host->mmio);
+
+	host->offset++;
+
+	if (host->command == NAND_CMD_READID)
+		return *(uint8_t *)(host->mmio + host->offset - 1);
+
+	return *(uint8_t *)(host->buffer + host->offset - 1);
+}
+
+static u16 hisi_nfc_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+
+	host->offset += 2;
+	return *(u16 *)(host->buffer + host->offset - 2);
+}
+
+static void
+hisi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+
+	memcpy(host->buffer + host->offset, buf, len);
+	host->offset += len;
+}
+
+static void hisi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+
+	memcpy(buf, host->buffer + host->offset, len);
+	host->offset += len;
+}
+
+static void set_addr(struct mtd_info *mtd, int column, int page_addr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+	unsigned int command = host->command;
+
+	host->addr_cycle    = 0;
+	host->addr_value[0] = 0;
+	host->addr_value[1] = 0;
+
+	/* Serially input address */
+	if (column != -1) {
+		/* Adjust columns for 16 bit buswidth */
+		if (chip->options & NAND_BUSWIDTH_16 &&
+				!nand_opcode_8bits(command))
+			column >>= 1;
+
+		host->addr_value[0] = column & 0xffff;
+		host->addr_cycle    = 2;
+	}
+	if (page_addr != -1) {
+		host->addr_value[0] |= (page_addr & 0xffff)
+			<< (host->addr_cycle * 8);
+		host->addr_cycle    += 2;
+		/* One more address cycle for devices > 128MiB */
+		if (chip->chipsize > (128 << 20)) {
+			host->addr_cycle += 1;
+			if (host->command == NAND_CMD_ERASE1)
+				host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16;
+			else
+				host->addr_value[1] |= ((page_addr >> 16) & 0xff);
+		}
+	}
+}
+
+static void hisi_nfc_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
+		int page_addr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct hinfc_host *host = chip->priv;
+	int is_cache_invalid = 1;
+	unsigned int flag = 0;
+
+	host->command =  command;
+
+	switch (command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		if (command == NAND_CMD_READ0)
+			host->offset = column;
+		else
+			host->offset = column + mtd->writesize;
+
+		is_cache_invalid = 0;
+		set_addr(mtd, column, page_addr);
+		hisi_nfc_send_cmd_readstart(host);
+		break;
+
+	case NAND_CMD_SEQIN:
+		host->offset = column;
+		set_addr(mtd, column, page_addr);
+		break;
+
+	case NAND_CMD_ERASE1:
+		set_addr(mtd, column, page_addr);
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		hisi_nfc_send_cmd_pageprog(host);
+		break;
+
+	case NAND_CMD_ERASE2:
+		hisi_nfc_send_cmd_erase(host);
+		break;
+
+	case NAND_CMD_READID:
+		host->offset = column;
+		memset(host->mmio, 0, 0x10);
+		hisi_nfc_send_cmd_readid(host);
+		break;
+
+	case NAND_CMD_STATUS:
+		flag = hinfc_read(host, HINFC504_CON);
+		if (chip->ecc.mode == NAND_ECC_HW)
+			hinfc_write(host,
+				    flag & ~(HINFC504_CON_ECCTYPE_MASK <<
+				    HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
+
+		host->offset = 0;
+		memset(host->mmio, 0, 0x10);
+		hisi_nfc_send_cmd_status(host);
+		hinfc_write(host, flag, HINFC504_CON);
+		break;
+
+	case NAND_CMD_RESET:
+		hisi_nfc_send_cmd_reset(host, host->chipselect);
+		break;
+
+	default:
+		dev_err(host->dev, "Error: unsupported cmd(cmd=%x, col=%x, page=%x)\n",
+			command, column, page_addr);
+	}
+
+	if (is_cache_invalid) {
+		host->cache_addr_value[0] = ~0;
+		host->cache_addr_value[1] = ~0;
+	}
+}
+
+static irqreturn_t hinfc_irq_handle(int irq, void *devid)
+{
+	struct hinfc_host *host = devid;
+	unsigned int flag;
+
+	flag = hinfc_read(host, HINFC504_INTS);
+	/* store interrupts state */
+	host->irq_status |= flag;
+
+	if (flag & HINFC504_INTS_DMA) {
+		hinfc_write(host, HINFC504_INTCLR_DMA, HINFC504_INTCLR);
+		complete(&host->cmd_complete);
+	} else if (flag & HINFC504_INTS_CE) {
+		hinfc_write(host, HINFC504_INTCLR_CE, HINFC504_INTCLR);
+	} else if (flag & HINFC504_INTS_UE) {
+		hinfc_write(host, HINFC504_INTCLR_UE, HINFC504_INTCLR);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int hisi_nand_read_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+{
+	struct hinfc_host *host = chip->priv;
+	int max_bitflips = 0, stat = 0, stat_max = 0, status_ecc;
+	int stat_1, stat_2;
+
+	chip->read_buf(mtd, buf, mtd->writesize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	/* errors which can not be corrected by ECC */
+	if (host->irq_status & HINFC504_INTS_UE) {
+		mtd->ecc_stats.failed++;
+	} else if (host->irq_status & HINFC504_INTS_CE) {
+		/* TODO: need add other ECC modes! */
+		switch (chip->ecc.strength) {
+		case 16:
+			status_ecc = hinfc_read(host, HINFC504_ECC_STATUS) >>
+					HINFC504_ECC_16_BIT_SHIFT & 0x0fff;
+			stat_2 = status_ecc & 0x3f;
+			stat_1 = status_ecc >> 6 & 0x3f;
+			stat = stat_1 + stat_2;
+			stat_max = max_t(int, stat_1, stat_2);
+		}
+		mtd->ecc_stats.corrected += stat;
+		max_bitflips = max_t(int, max_bitflips, stat_max);
+	}
+	host->irq_status = 0;
+
+	return max_bitflips;
+}
+
+static int hisi_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+				int page)
+{
+	struct hinfc_host *host = chip->priv;
+
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	if (host->irq_status & HINFC504_INTS_UE) {
+		host->irq_status = 0;
+		return -EBADMSG;
+	}
+
+	host->irq_status = 0;
+	return 0;
+}
+
+static int hisi_nand_write_page_hwecc(struct mtd_info *mtd,
+		struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+	chip->write_buf(mtd, buf, mtd->writesize);
+	if (oob_required)
+		chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static void hisi_nfc_host_init(struct hinfc_host *host)
+{
+	struct nand_chip *chip = &host->chip;
+	unsigned int flag = 0;
+
+	host->version = hinfc_read(host, HINFC_VERSION);
+	host->addr_cycle		= 0;
+	host->addr_value[0]		= 0;
+	host->addr_value[1]		= 0;
+	host->cache_addr_value[0]	= ~0;
+	host->cache_addr_value[1]	= ~0;
+	host->chipselect		= 0;
+
+	/* default page size: 2K, ecc_none. need modify */
+	flag = HINFC504_CON_OP_MODE_NORMAL | HINFC504_CON_READY_BUSY_SEL
+		| ((0x001 & HINFC504_CON_PAGESIZE_MASK)
+			<< HINFC504_CON_PAGEISZE_SHIFT)
+		| ((0x0 & HINFC504_CON_ECCTYPE_MASK)
+			<< HINFC504_CON_ECCTYPE_SHIFT)
+		| ((chip->options & NAND_BUSWIDTH_16) ?
+			HINFC504_CON_BUS_WIDTH : 0);
+	hinfc_write(host, flag, HINFC504_CON);
+
+	memset(host->mmio, 0xff, HINFC504_BUFFER_BASE_ADDRESS_LEN);
+
+	hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
+		    HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
+
+	/* enable DMA irq */
+	hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN);
+}
+
+static struct nand_ecclayout nand_ecc_2K_16bits = {
+	.oobavail = 6,
+	.oobfree = { {2, 6} },
+};
+
+static int hisi_nfc_ecc_probe(struct hinfc_host *host)
+{
+	unsigned int flag;
+	int size, strength, ecc_bits;
+	struct device *dev = host->dev;
+	struct nand_chip *chip = &host->chip;
+	struct mtd_info *mtd = &host->mtd;
+	struct device_node *np = host->dev->of_node;
+
+	size = of_get_nand_ecc_step_size(np);
+	strength = of_get_nand_ecc_strength(np);
+	if (size != 1024) {
+		dev_err(dev, "error ecc size: %d\n", size);
+		return -EINVAL;
+	}
+
+	if ((size == 1024) && ((strength != 8) && (strength != 16) &&
+				(strength != 24) && (strength != 40))) {
+		dev_err(dev, "ecc size and strength do not match\n");
+		return -EINVAL;
+	}
+
+	chip->ecc.size = size;
+	chip->ecc.strength = strength;
+
+	chip->ecc.read_page = hisi_nand_read_page_hwecc;
+	chip->ecc.read_oob = hisi_nand_read_oob;
+	chip->ecc.write_page = hisi_nand_write_page_hwecc;
+
+	switch (chip->ecc.strength) {
+	case 16:
+		ecc_bits = 6;
+		if (mtd->writesize == 2048)
+			chip->ecc.layout = &nand_ecc_2K_16bits;
+
+		/* TODO: add more page size support */
+		break;
+
+	/* TODO: add more ecc strength support */
+	default:
+		dev_err(dev, "not support strength: %d\n", chip->ecc.strength);
+		return -EINVAL;
+	}
+
+	flag = hinfc_read(host, HINFC504_CON);
+	/* add ecc type configure */
+	flag |= ((ecc_bits & HINFC504_CON_ECCTYPE_MASK)
+						<< HINFC504_CON_ECCTYPE_SHIFT);
+	hinfc_write(host, flag, HINFC504_CON);
+
+	/* enable ecc irq */
+	flag = hinfc_read(host, HINFC504_INTEN) & 0xfff;
+	hinfc_write(host, flag | HINFC504_INTEN_UE | HINFC504_INTEN_CE,
+		    HINFC504_INTEN);
+
+	return 0;
+}
+
+static int hisi_nfc_probe(struct platform_device *pdev)
+{
+	int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP;
+	struct device *dev = &pdev->dev;
+	struct hinfc_host *host;
+	struct nand_chip  *chip;
+	struct mtd_info   *mtd;
+	struct resource	  *res;
+	struct device_node *np = dev->of_node;
+	struct mtd_part_parser_data ppdata;
+
+	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+	host->dev = dev;
+
+	platform_set_drvdata(pdev, host);
+	chip = &host->chip;
+	mtd  = &host->mtd;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no IRQ resource defined\n");
+		ret = -ENXIO;
+		goto err_res;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->iobase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(host->iobase)) {
+		ret = PTR_ERR(host->iobase);
+		goto err_res;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	host->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(host->mmio)) {
+		ret = PTR_ERR(host->mmio);
+		dev_err(dev, "devm_ioremap_resource[1] fail\n");
+		goto err_res;
+	}
+
+	mtd->priv		= chip;
+	mtd->owner		= THIS_MODULE;
+	mtd->name		= "hisi_nand";
+	mtd->dev.parent         = &pdev->dev;
+
+	chip->priv		= host;
+	chip->cmdfunc		= hisi_nfc_cmdfunc;
+	chip->select_chip	= hisi_nfc_select_chip;
+	chip->read_byte		= hisi_nfc_read_byte;
+	chip->read_word		= hisi_nfc_read_word;
+	chip->write_buf		= hisi_nfc_write_buf;
+	chip->read_buf		= hisi_nfc_read_buf;
+	chip->chip_delay	= HINFC504_CHIP_DELAY;
+
+	chip->ecc.mode = of_get_nand_ecc_mode(np);
+
+	buswidth = of_get_nand_bus_width(np);
+	if (buswidth == 16)
+		chip->options |= NAND_BUSWIDTH_16;
+
+	hisi_nfc_host_init(host);
+
+	ret = devm_request_irq(dev, irq, hinfc_irq_handle, IRQF_DISABLED,
+				"nandc", host);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ\n");
+		goto err_res;
+	}
+
+	ret = nand_scan_ident(mtd, max_chips, NULL);
+	if (ret) {
+		ret = -ENODEV;
+		goto err_res;
+	}
+
+	host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize,
+		&host->dma_buffer, GFP_KERNEL);
+	if (!host->buffer) {
+		ret = -ENOMEM;
+		goto err_res;
+	}
+
+	host->dma_oob = host->dma_buffer + mtd->writesize;
+	memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize);
+
+	flag = hinfc_read(host, HINFC504_CON);
+	flag &= ~(HINFC504_CON_PAGESIZE_MASK << HINFC504_CON_PAGEISZE_SHIFT);
+	switch (mtd->writesize) {
+	case 2048:
+		flag |= (0x001 << HINFC504_CON_PAGEISZE_SHIFT); break;
+	/*
+	 * TODO: add more pagesize support,
+	 * default pagesize has been set in hisi_nfc_host_init
+	 */
+	default:
+		dev_err(dev, "NON-2KB page size nand flash\n");
+		ret = -EINVAL;
+		goto err_res;
+	}
+	hinfc_write(host, flag, HINFC504_CON);
+
+	if (chip->ecc.mode == NAND_ECC_HW)
+		hisi_nfc_ecc_probe(host);
+
+	ret = nand_scan_tail(mtd);
+	if (ret) {
+		dev_err(dev, "nand_scan_tail failed: %d\n", ret);
+		goto err_res;
+	}
+
+	ppdata.of_node = np;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+	if (ret) {
+		dev_err(dev, "Err MTD partition=%d\n", ret);
+		goto err_mtd;
+	}
+
+	return 0;
+
+err_mtd:
+	nand_release(mtd);
+err_res:
+	return ret;
+}
+
+static int hisi_nfc_remove(struct platform_device *pdev)
+{
+	struct hinfc_host *host = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = &host->mtd;
+
+	nand_release(mtd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hisi_nfc_suspend(struct device *dev)
+{
+	struct hinfc_host *host = dev_get_drvdata(dev);
+	unsigned long timeout = jiffies + HINFC504_NFC_PM_TIMEOUT;
+
+	while (time_before(jiffies, timeout)) {
+		if (((hinfc_read(host, HINFC504_STATUS) & 0x1) == 0x0) &&
+		    (hinfc_read(host, HINFC504_DMA_CTRL) &
+		     HINFC504_DMA_CTRL_DMA_START)) {
+			cond_resched();
+			return 0;
+		}
+	}
+
+	dev_err(host->dev, "nand controller suspend timeout.\n");
+
+	return -EAGAIN;
+}
+
+static int hisi_nfc_resume(struct device *dev)
+{
+	int cs;
+	struct hinfc_host *host = dev_get_drvdata(dev);
+	struct nand_chip *chip = &host->chip;
+
+	for (cs = 0; cs < chip->numchips; cs++)
+		hisi_nfc_send_cmd_reset(host, cs);
+	hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
+		    HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
+
+	return 0;
+}
+#endif
+static SIMPLE_DEV_PM_OPS(hisi_nfc_pm_ops, hisi_nfc_suspend, hisi_nfc_resume);
+
+static const struct of_device_id nfc_id_table[] = {
+	{ .compatible = "hisilicon,504-nfc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nfc_id_table);
+
+static struct platform_driver hisi_nfc_driver = {
+	.driver = {
+		.name  = "hisi_nand",
+		.of_match_table = nfc_id_table,
+		.pm = &hisi_nfc_pm_ops,
+	},
+	.probe		= hisi_nfc_probe,
+	.remove		= hisi_nfc_remove,
+};
+
+module_platform_driver(hisi_nfc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhou Wang");
+MODULE_AUTHOR("Zhiyong Cai");
+MODULE_DESCRIPTION("Hisilicon Nand Flash Controller Driver");

drivers/mtd/nand/jz4740_nand.c

@@ -69,7 +69,7 @@ struct jz_nand {
 
 	int selected_bank;
 
-	struct jz_nand_platform_data *pdata;
+	struct gpio_desc *busy_gpio;
 	bool is_reading;
 };
 
@@ -131,7 +131,7 @@ static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
 static int jz_nand_dev_ready(struct mtd_info *mtd)
 {
 	struct jz_nand *nand = mtd_to_jz_nand(mtd);
-	return gpio_get_value_cansleep(nand->pdata->busy_gpio);
+	return gpiod_get_value_cansleep(nand->busy_gpio);
 }
 
 static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
@@ -423,14 +423,12 @@ static int jz_nand_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_free;
 
-	if (pdata && gpio_is_valid(pdata->busy_gpio)) {
-		ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
-		if (ret) {
-			dev_err(&pdev->dev,
-				"Failed to request busy gpio %d: %d\n",
-				pdata->busy_gpio, ret);
-			goto err_iounmap_mmio;
-		}
+	nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN);
+	if (IS_ERR(nand->busy_gpio)) {
+		ret = PTR_ERR(nand->busy_gpio);
+		dev_err(&pdev->dev, "Failed to request busy gpio %d\n",
+		    ret);
+		goto err_iounmap_mmio;
 	}
 
 	mtd		= &nand->mtd;
@@ -454,10 +452,9 @@ static int jz_nand_probe(struct platform_device *pdev)
 	chip->cmd_ctrl = jz_nand_cmd_ctrl;
 	chip->select_chip = jz_nand_select_chip;
 
-	if (pdata && gpio_is_valid(pdata->busy_gpio))
+	if (nand->busy_gpio)
 		chip->dev_ready = jz_nand_dev_ready;
 
-	nand->pdata = pdata;
 	platform_set_drvdata(pdev, nand);
 
 	/* We are going to autodetect NAND chips in the banks specified in the
@@ -496,7 +493,7 @@ static int jz_nand_probe(struct platform_device *pdev)
 	}
 	if (chipnr == 0) {
 		dev_err(&pdev->dev, "No NAND chips found\n");
-		goto err_gpio_busy;
+		goto err_iounmap_mmio;
 	}
 
 	if (pdata && pdata->ident_callback) {
@@ -533,9 +530,6 @@ static int jz_nand_probe(struct platform_device *pdev)
 					 nand->bank_base[bank - 1]);
 	}
 	writel(0, nand->base + JZ_REG_NAND_CTRL);
-err_gpio_busy:
-	if (pdata && gpio_is_valid(pdata->busy_gpio))
-		gpio_free(pdata->busy_gpio);
 err_iounmap_mmio:
 	jz_nand_iounmap_resource(nand->mem, nand->base);
 err_free:
@@ -546,7 +540,6 @@ static int jz_nand_probe(struct platform_device *pdev)
 static int jz_nand_remove(struct platform_device *pdev)
 {
 	struct jz_nand *nand = platform_get_drvdata(pdev);
-	struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	size_t i;
 
 	nand_release(&nand->mtd);
@@ -562,8 +555,6 @@ static int jz_nand_remove(struct platform_device *pdev)
 			gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
 		}
 	}
-	if (pdata && gpio_is_valid(pdata->busy_gpio))
-		gpio_free(pdata->busy_gpio);
 
 	jz_nand_iounmap_resource(nand->mem, nand->base);
 

drivers/mtd/nand/nand_base.c

@@ -156,7 +156,6 @@ static uint8_t nand_read_byte(struct mtd_info *mtd)
 }
 
 /**
- * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
  * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
  * @mtd: MTD device structure
  *
@@ -1751,11 +1750,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 				  int page)
 {
-	uint8_t *buf = chip->oob_poi;
 	int length = mtd->oobsize;
 	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
 	int eccsize = chip->ecc.size;
-	uint8_t *bufpoi = buf;
+	uint8_t *bufpoi = chip->oob_poi;
 	int i, toread, sndrnd = 0, pos;
 
 	chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
@@ -2944,6 +2942,16 @@ static void nand_resume(struct mtd_info *mtd)
 			__func__);
 }
 
+/**
+ * nand_shutdown - [MTD Interface] Finish the current NAND operation and
+ *                 prevent further operations
+ * @mtd: MTD device structure
+ */
+static void nand_shutdown(struct mtd_info *mtd)
+{
+	nand_get_device(mtd, FL_SHUTDOWN);
+}
+
 /* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
 {
@@ -4028,22 +4036,24 @@ int nand_scan_tail(struct mtd_info *mtd)
 		ecc->read_oob = nand_read_oob_std;
 		ecc->write_oob = nand_write_oob_std;
 		/*
-		 * Board driver should supply ecc.size and ecc.bytes values to
-		 * select how many bits are correctable; see nand_bch_init()
-		 * for details. Otherwise, default to 4 bits for large page
-		 * devices.
+		 * Board driver should supply ecc.size and ecc.strength values
+		 * to select how many bits are correctable. Otherwise, default
+		 * to 4 bits for large page devices.
 		 */
 		if (!ecc->size && (mtd->oobsize >= 64)) {
 			ecc->size = 512;
-			ecc->bytes = DIV_ROUND_UP(13 * ecc->strength, 8);
+			ecc->strength = 4;
 		}
+
+		/* See nand_bch_init() for details. */
+		ecc->bytes = DIV_ROUND_UP(
+				ecc->strength * fls(8 * ecc->size), 8);
 		ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
 					       &ecc->layout);
 		if (!ecc->priv) {
 			pr_warn("BCH ECC initialization failed!\n");
 			BUG();
 		}
-		ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
 		break;
 
 	case NAND_ECC_NONE:
@@ -4146,6 +4156,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->_unlock = NULL;
 	mtd->_suspend = nand_suspend;
 	mtd->_resume = nand_resume;
+	mtd->_reboot = nand_shutdown;
 	mtd->_block_isreserved = nand_block_isreserved;
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
@@ -4161,7 +4172,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 * properly set.
 	 */
 	if (!mtd->bitflip_threshold)
-		mtd->bitflip_threshold = mtd->ecc_strength;
+		mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
 
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)

drivers/mtd/nand/nandsim.c

@@ -245,7 +245,6 @@ MODULE_PARM_DESC(bch,		 "Enable BCH ecc and set how many bits should "
 #define STATE_DATAOUT          0x00001000 /* waiting for page data output */
 #define STATE_DATAOUT_ID       0x00002000 /* waiting for ID bytes output */
 #define STATE_DATAOUT_STATUS   0x00003000 /* waiting for status output */
-#define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
 #define STATE_DATAOUT_MASK     0x00007000 /* data output states mask */
 
 /* Previous operation is done, ready to accept new requests */
@@ -269,7 +268,6 @@ MODULE_PARM_DESC(bch,		 "Enable BCH ecc and set how many bits should "
 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
-#define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
@@ -1096,8 +1094,6 @@ static char *get_state_name(uint32_t state)
 			return "STATE_DATAOUT_ID";
 		case STATE_DATAOUT_STATUS:
 			return "STATE_DATAOUT_STATUS";
-		case STATE_DATAOUT_STATUS_M:
-			return "STATE_DATAOUT_STATUS_M";
 		case STATE_READY:
 			return "STATE_READY";
 		case STATE_UNKNOWN:
@@ -1865,7 +1861,6 @@ static void switch_state(struct nandsim *ns)
 				break;
 
 			case STATE_DATAOUT_STATUS:
-			case STATE_DATAOUT_STATUS_M:
 				ns->regs.count = ns->regs.num = 0;
 				break;
 
@@ -2005,7 +2000,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 		}
 
 		if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
-			|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
 			|| NS_STATE(ns->state) == STATE_DATAOUT) {
 			int row = ns->regs.row;
 
@@ -2343,6 +2337,7 @@ static int __init ns_init_module(void)
 		}
 		chip->ecc.mode = NAND_ECC_SOFT_BCH;
 		chip->ecc.size = 512;
+		chip->ecc.strength = bch;
 		chip->ecc.bytes = eccbytes;
 		NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
 	}

drivers/mtd/nand/omap2.c

@@ -1048,10 +1048,9 @@ static int omap_dev_ready(struct mtd_info *mtd)
  * @mtd: MTD device structure
  * @mode: Read/Write mode
  *
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Using wrapping mode 6 both for reading and writing if ELM module not uses
- * for error correction.
- * On writing,
+ * When using BCH with SW correction (i.e. no ELM), sector size is set
+ * to 512 bytes and we use BCH_WRAPMODE_6 wrapping mode
+ * for both reading and writing with:
  * eccsize0 = 0  (no additional protected byte in spare area)
  * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
  */
@@ -1071,15 +1070,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
 		bch_type = 0;
 		nsectors = 1;
-		if (mode == NAND_ECC_READ) {
-			wr_mode	  = BCH_WRAPMODE_6;
-			ecc_size0 = BCH_ECC_SIZE0;
-			ecc_size1 = BCH_ECC_SIZE1;
-		} else {
-			wr_mode   = BCH_WRAPMODE_6;
-			ecc_size0 = BCH_ECC_SIZE0;
-			ecc_size1 = BCH_ECC_SIZE1;
-		}
+		wr_mode	  = BCH_WRAPMODE_6;
+		ecc_size0 = BCH_ECC_SIZE0;
+		ecc_size1 = BCH_ECC_SIZE1;
 		break;
 	case OMAP_ECC_BCH4_CODE_HW:
 		bch_type = 0;
@@ -1097,15 +1090,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
 		bch_type = 1;
 		nsectors = 1;
-		if (mode == NAND_ECC_READ) {
-			wr_mode	  = BCH_WRAPMODE_6;
-			ecc_size0 = BCH_ECC_SIZE0;
-			ecc_size1 = BCH_ECC_SIZE1;
-		} else {
-			wr_mode   = BCH_WRAPMODE_6;
-			ecc_size0 = BCH_ECC_SIZE0;
-			ecc_size1 = BCH_ECC_SIZE1;
-		}
+		wr_mode	  = BCH_WRAPMODE_6;
+		ecc_size0 = BCH_ECC_SIZE0;
+		ecc_size1 = BCH_ECC_SIZE1;
 		break;
 	case OMAP_ECC_BCH8_CODE_HW:
 		bch_type = 1;

drivers/mtd/nand/sunxi_nand.c

@@ -1110,8 +1110,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
 
 	switch (ecc->mode) {
 	case NAND_ECC_SOFT_BCH:
-		ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * ecc->size),
-					  8);
 		break;
 	case NAND_ECC_HW:
 		ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);

drivers/mtd/nftlmount.c

@@ -89,9 +89,10 @@ static int find_boot_record(struct NFTLrecord *nftl)
 		}
 
 		/* To be safer with BIOS, also use erase mark as discriminant */
-		if ((ret = nftl_read_oob(mtd, block * nftl->EraseSize +
+		ret = nftl_read_oob(mtd, block * nftl->EraseSize +
 					 SECTORSIZE + 8, 8, &retlen,
-					 (char *)&h1) < 0)) {
+					 (char *)&h1);
+		if (ret < 0) {
 			printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n",
 			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
 			continue;
@@ -109,8 +110,9 @@ static int find_boot_record(struct NFTLrecord *nftl)
 		}
 
 		/* Finally reread to check ECC */
-		if ((ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
-				     &retlen, buf) < 0)) {
+		ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
+				&retlen, buf);
+		if (ret < 0) {
 			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",
 			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
 			continue;
@@ -228,9 +230,11 @@ device is already correct.
 The new DiskOnChip driver already scanned the bad block table.  Just query it.
 			if ((i & (SECTORSIZE - 1)) == 0) {
 				/* read one sector for every SECTORSIZE of blocks */
-				if ((ret = mtd->read(nftl->mbd.mtd, block * nftl->EraseSize +
-						     i + SECTORSIZE, SECTORSIZE, &retlen,
-						     buf)) < 0) {
+				ret = mtd->read(nftl->mbd.mtd,
+						block * nftl->EraseSize + i +
+						SECTORSIZE, SECTORSIZE,
+						&retlen, buf);
+				if (ret < 0) {
 					printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",
 					       ret);
 					kfree(nftl->ReplUnitTable);

drivers/mtd/spi-nor/fsl-quadspi.c

@@ -57,7 +57,9 @@
 
 #define QUADSPI_BUF3CR			0x1c
 #define QUADSPI_BUF3CR_ALLMST_SHIFT	31
-#define QUADSPI_BUF3CR_ALLMST		(1 << QUADSPI_BUF3CR_ALLMST_SHIFT)
+#define QUADSPI_BUF3CR_ALLMST_MASK	(1 << QUADSPI_BUF3CR_ALLMST_SHIFT)
+#define QUADSPI_BUF3CR_ADATSZ_SHIFT		8
+#define QUADSPI_BUF3CR_ADATSZ_MASK	(0xFF << QUADSPI_BUF3CR_ADATSZ_SHIFT)
 
 #define QUADSPI_BFGENCR			0x20
 #define QUADSPI_BFGENCR_PAR_EN_SHIFT	16
@@ -198,18 +200,21 @@ struct fsl_qspi_devtype_data {
 	enum fsl_qspi_devtype devtype;
 	int rxfifo;
 	int txfifo;
+	int ahb_buf_size;
 };
 
 static struct fsl_qspi_devtype_data vybrid_data = {
 	.devtype = FSL_QUADSPI_VYBRID,
 	.rxfifo = 128,
-	.txfifo = 64
+	.txfifo = 64,
+	.ahb_buf_size = 1024
 };
 
 static struct fsl_qspi_devtype_data imx6sx_data = {
 	.devtype = FSL_QUADSPI_IMX6SX,
 	.rxfifo = 128,
-	.txfifo = 512
+	.txfifo = 512,
+	.ahb_buf_size = 1024
 };
 
 #define FSL_QSPI_MAX_CHIP	4
@@ -227,6 +232,7 @@ struct fsl_qspi {
 	u32 nor_num;
 	u32 clk_rate;
 	unsigned int chip_base_addr; /* We may support two chips. */
+	bool has_second_chip;
 };
 
 static inline int is_vybrid_qspi(struct fsl_qspi *q)
@@ -583,7 +589,12 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
 	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
 	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
 	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
-	writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR);
+	/*
+	 * Set ADATSZ with the maximum AHB buffer size to improve the
+	 * read performance.
+	 */
+	writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8)
+			<< QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR);
 
 	/* We only use the buffer3 */
 	writel(0, base + QUADSPI_BUF0IND);
@@ -783,7 +794,6 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	struct spi_nor *nor;
 	struct mtd_info *mtd;
 	int ret, i = 0;
-	bool has_second_chip = false;
 	const struct of_device_id *of_id =
 			of_match_device(fsl_qspi_dt_ids, &pdev->dev);
 
@@ -798,37 +808,30 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	/* find the resources */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI");
 	q->iobase = devm_ioremap_resource(dev, res);
-	if (IS_ERR(q->iobase)) {
-		ret = PTR_ERR(q->iobase);
-		goto map_failed;
-	}
+	if (IS_ERR(q->iobase))
+		return PTR_ERR(q->iobase);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					"QuadSPI-memory");
 	q->ahb_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(q->ahb_base)) {
-		ret = PTR_ERR(q->ahb_base);
-		goto map_failed;
-	}
+	if (IS_ERR(q->ahb_base))
+		return PTR_ERR(q->ahb_base);
+
 	q->memmap_phy = res->start;
 
 	/* find the clocks */
 	q->clk_en = devm_clk_get(dev, "qspi_en");
-	if (IS_ERR(q->clk_en)) {
-		ret = PTR_ERR(q->clk_en);
-		goto map_failed;
-	}
+	if (IS_ERR(q->clk_en))
+		return PTR_ERR(q->clk_en);
 
 	q->clk = devm_clk_get(dev, "qspi");
-	if (IS_ERR(q->clk)) {
-		ret = PTR_ERR(q->clk);
-		goto map_failed;
-	}
+	if (IS_ERR(q->clk))
+		return PTR_ERR(q->clk);
 
 	ret = clk_prepare_enable(q->clk_en);
 	if (ret) {
 		dev_err(dev, "can not enable the qspi_en clock\n");
-		goto map_failed;
+		return ret;
 	}
 
 	ret = clk_prepare_enable(q->clk);
@@ -860,14 +863,14 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 		goto irq_failed;
 
 	if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
-		has_second_chip = true;
+		q->has_second_chip = true;
 
 	/* iterate the subnodes. */
 	for_each_available_child_of_node(dev->of_node, np) {
 		char modalias[40];
 
 		/* skip the holes */
-		if (!has_second_chip)
+		if (!q->has_second_chip)
 			i *= 2;
 
 		nor = &q->nor[i];
@@ -890,24 +893,24 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 		ret = of_modalias_node(np, modalias, sizeof(modalias));
 		if (ret < 0)
-			goto map_failed;
+			goto irq_failed;
 
 		ret = of_property_read_u32(np, "spi-max-frequency",
 				&q->clk_rate);
 		if (ret < 0)
-			goto map_failed;
+			goto irq_failed;
 
 		/* set the chip address for READID */
 		fsl_qspi_set_base_addr(q, nor);
 
 		ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
 		if (ret)
-			goto map_failed;
+			goto irq_failed;
 
 		ppdata.of_node = np;
 		ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 		if (ret)
-			goto map_failed;
+			goto irq_failed;
 
 		/* Set the correct NOR size now. */
 		if (q->nor_size == 0) {
@@ -939,19 +942,19 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 	clk_disable(q->clk);
 	clk_disable(q->clk_en);
-	dev_info(dev, "QuadSPI SPI NOR flash driver\n");
 	return 0;
 
 last_init_failed:
-	for (i = 0; i < q->nor_num; i++)
+	for (i = 0; i < q->nor_num; i++) {
+		/* skip the holes */
+		if (!q->has_second_chip)
+			i *= 2;
 		mtd_device_unregister(&q->mtd[i]);
-
+	}
 irq_failed:
 	clk_disable_unprepare(q->clk);
 clk_failed:
 	clk_disable_unprepare(q->clk_en);
-map_failed:
-	dev_err(dev, "Freescale QuadSPI probe failed\n");
 	return ret;
 }
 
@@ -960,8 +963,12 @@ static int fsl_qspi_remove(struct platform_device *pdev)
 	struct fsl_qspi *q = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < q->nor_num; i++)
+	for (i = 0; i < q->nor_num; i++) {
+		/* skip the holes */
+		if (!q->has_second_chip)
+			i *= 2;
 		mtd_device_unregister(&q->mtd[i]);
+	}
 
 	/* disable the hardware */
 	writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
@@ -972,6 +979,22 @@ static int fsl_qspi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return 0;
+}
+
+static int fsl_qspi_resume(struct platform_device *pdev)
+{
+	struct fsl_qspi *q = platform_get_drvdata(pdev);
+
+	fsl_qspi_nor_setup(q);
+	fsl_qspi_set_map_addr(q);
+	fsl_qspi_nor_setup_last(q);
+
+	return 0;
+}
+
 static struct platform_driver fsl_qspi_driver = {
 	.driver = {
 		.name	= "fsl-quadspi",
@@ -980,6 +1003,8 @@ static struct platform_driver fsl_qspi_driver = {
 	},
 	.probe          = fsl_qspi_probe,
 	.remove		= fsl_qspi_remove,
+	.suspend	= fsl_qspi_suspend,
+	.resume		= fsl_qspi_resume,
 };
 module_platform_driver(fsl_qspi_driver);
 

drivers/mtd/spi-nor/spi-nor.c

@@ -538,6 +538,7 @@ static const struct spi_device_id spi_nor_ids[] = {
 	/* GigaDevice */
 	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
 
 	/* Intel/Numonyx -- xxxs33b */
 	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
@@ -560,14 +561,14 @@ static const struct spi_device_id spi_nor_ids[] = {
 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
 
 	/* Micron */
-	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, 0) },
-	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
-	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
-	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
-	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
-	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) },
-	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },
+	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SPI_NOR_QUAD_READ) },
+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
@@ -891,6 +892,45 @@ static int spansion_quad_enable(struct spi_nor *nor)
 	return 0;
 }
 
+static int micron_quad_enable(struct spi_nor *nor)
+{
+	int ret;
+	u8 val;
+
+	ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
+	if (ret < 0) {
+		dev_err(nor->dev, "error %d reading EVCR\n", ret);
+		return ret;
+	}
+
+	write_enable(nor);
+
+	/* set EVCR, enable quad I/O */
+	nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
+	ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0);
+	if (ret < 0) {
+		dev_err(nor->dev, "error while writing EVCR register\n");
+		return ret;
+	}
+
+	ret = spi_nor_wait_till_ready(nor);
+	if (ret)
+		return ret;
+
+	/* read EVCR and check it */
+	ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
+	if (ret < 0) {
+		dev_err(nor->dev, "error %d reading EVCR\n", ret);
+		return ret;
+	}
+	if (val & EVCR_QUAD_EN_MICRON) {
+		dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
 {
 	int status;
@@ -903,6 +943,13 @@ static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
 			return -EINVAL;
 		}
 		return status;
+	case CFI_MFR_ST:
+		status = micron_quad_enable(nor);
+		if (status) {
+			dev_err(nor->dev, "Micron quad-read not enabled\n");
+			return -EINVAL;
+		}
+		return status;
 	default:
 		status = spansion_quad_enable(nor);
 		if (status) {

fs/jffs2/compr_rubin.c

@@ -84,11 +84,6 @@ static inline int pullbit(struct pushpull *pp)
 	return bit;
 }
 
-static inline int pulledbits(struct pushpull *pp)
-{
-	return pp->ofs;
-}
-
 
 static void init_rubin(struct rubin_state *rs, int div, int *bits)
 {

fs/jffs2/scan.c

@@ -510,6 +510,10 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 				sumlen = c->sector_size - je32_to_cpu(sm->offset);
 				sumptr = buf + buf_size - sumlen;
 
+				/* sm->offset maybe wrong but MAGIC maybe right */
+				if (sumlen > c->sector_size)
+					goto full_scan;
+
 				/* Now, make sure the summary itself is available */
 				if (sumlen > buf_size) {
 					/* Need to kmalloc for this. */
@@ -544,6 +548,7 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 		}
 	}
 
+full_scan:
 	buf_ofs = jeb->offset;
 
 	if (!buf_size) {

include/linux/mtd/mtd.h

@@ -227,6 +227,7 @@ struct mtd_info {
 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
 	int (*_suspend) (struct mtd_info *mtd);
 	void (*_resume) (struct mtd_info *mtd);
+	void (*_reboot) (struct mtd_info *mtd);
 	/*
 	 * If the driver is something smart, like UBI, it may need to maintain
 	 * its own reference counting. The below functions are only for driver.

include/linux/mtd/spi-nor.h

@@ -56,6 +56,10 @@
 /* Used for Spansion flashes only. */
 #define SPINOR_OP_BRWR		0x17	/* Bank register write */
 
+/* Used for Micron flashes only. */
+#define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
+#define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
+
 /* Status Register bits. */
 #define SR_WIP			1	/* Write in progress */
 #define SR_WEL			2	/* Write enable latch */
@@ -67,6 +71,9 @@
 
 #define SR_QUAD_EN_MX		0x40	/* Macronix Quad I/O */
 
+/* Enhanced Volatile Configuration Register bits */
+#define EVCR_QUAD_EN_MICRON    0x80    /* Micron Quad I/O */
+
 /* Flag Status Register bits */
 #define FSR_READY		0x80