Merge tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Convert to GPIO descriptors

  Fix-ups:
   - Trivial: fix coding style in sky81452-backlight
   - Ensure backlight state is known on bring-up in ktd253
   - Use common platform API in qcom-wled and fbdev"

* tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight/video: Use Platform getter/setter functions
  backlight: ktd253: Bring up in a known state
  backlight: sky81452-backlight: Convert comma to semicolon
  backlight: lms283gf05: Convert to GPIO descriptors

arch/arm/mach-pxa/z2.c

@@ -20,7 +20,6 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/libertas_spi.h>
-#include <linux/spi/lms283gf05.h>
 #include <linux/power_supply.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
@@ -578,8 +577,13 @@ static struct pxa2xx_spi_chip lms283_chip_info = {
 	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
 };
 
-static const struct lms283gf05_pdata lms283_pdata = {
-	.reset_gpio	= GPIO19_ZIPITZ2_LCD_RESET,
+static struct gpiod_lookup_table lms283_gpio_table = {
+	.dev_id = "spi2.0", /* SPI bus 2 chip select 0 */
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO19_ZIPITZ2_LCD_RESET,
+			    "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct spi_board_info spi_board_info[] __initdata = {
@@ -595,7 +599,6 @@ static struct spi_board_info spi_board_info[] __initdata = {
 {
 	.modalias		= "lms283gf05",
 	.controller_data	= &lms283_chip_info,
-	.platform_data		= &lms283_pdata,
 	.max_speed_hz		= 400000,
 	.bus_num		= 2,
 	.chip_select		= 0,
@@ -615,6 +618,7 @@ static void __init z2_spi_init(void)
 {
 	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	gpiod_add_lookup_table(&lms283_gpio_table);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 #else

drivers/video/backlight/ktd253-backlight.c

@@ -137,15 +137,7 @@ static int ktd253_backlight_probe(struct platform_device *pdev)
 		brightness = max_brightness;
 	}
 
-	if (brightness)
-		/* This will be the default ratio when the KTD253 is enabled */
-		ktd253->ratio = KTD253_MAX_RATIO;
-	else
-		ktd253->ratio = 0;
-
-	ktd253->gpiod = devm_gpiod_get(dev, "enable",
-				       brightness ? GPIOD_OUT_HIGH :
-				       GPIOD_OUT_LOW);
+	ktd253->gpiod = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
 	if (IS_ERR(ktd253->gpiod)) {
 		ret = PTR_ERR(ktd253->gpiod);
 		if (ret != -EPROBE_DEFER)
@@ -153,6 +145,8 @@ static int ktd253_backlight_probe(struct platform_device *pdev)
 		return ret;
 	}
 	gpiod_set_consumer_name(ktd253->gpiod, dev_name(dev));
+	/* Bring backlight to a known off state */
+	msleep(KTD253_T_OFF_MS);
 
 	bl = devm_backlight_device_register(dev, dev_name(dev), dev, ktd253,
 					    &ktd253_backlight_ops, NULL);

drivers/video/backlight/lms283gf05.c

@@ -9,16 +9,16 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
 
 #include <linux/spi/spi.h>
-#include <linux/spi/lms283gf05.h>
 #include <linux/module.h>
 
 struct lms283gf05_state {
 	struct spi_device	*spi;
 	struct lcd_device	*ld;
+	struct gpio_desc	*reset;
 };
 
 struct lms283gf05_seq {
@@ -90,13 +90,13 @@ static const struct lms283gf05_seq disp_pdwnseq[] = {
 };
 
 
-static void lms283gf05_reset(unsigned long gpio, bool inverted)
+static void lms283gf05_reset(struct gpio_desc *gpiod)
 {
-	gpio_set_value(gpio, !inverted);
+	gpiod_set_value(gpiod, 0); /* De-asserted */
 	mdelay(100);
-	gpio_set_value(gpio, inverted);
+	gpiod_set_value(gpiod, 1); /* Asserted */
 	mdelay(20);
-	gpio_set_value(gpio, !inverted);
+	gpiod_set_value(gpiod, 0); /* De-asserted */
 	mdelay(20);
 }
 
@@ -125,18 +125,15 @@ static int lms283gf05_power_set(struct lcd_device *ld, int power)
 {
 	struct lms283gf05_state *st = lcd_get_data(ld);
 	struct spi_device *spi = st->spi;
-	struct lms283gf05_pdata *pdata = dev_get_platdata(&spi->dev);
 
 	if (power <= FB_BLANK_NORMAL) {
-		if (pdata)
-			lms283gf05_reset(pdata->reset_gpio,
-					pdata->reset_inverted);
+		if (st->reset)
+			lms283gf05_reset(st->reset);
 		lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
 	} else {
 		lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
-		if (pdata)
-			gpio_set_value(pdata->reset_gpio,
-					pdata->reset_inverted);
+		if (st->reset)
+			gpiod_set_value(st->reset, 1); /* Asserted */
 	}
 
 	return 0;
@@ -150,24 +147,18 @@ static struct lcd_ops lms_ops = {
 static int lms283gf05_probe(struct spi_device *spi)
 {
 	struct lms283gf05_state *st;
-	struct lms283gf05_pdata *pdata = dev_get_platdata(&spi->dev);
 	struct lcd_device *ld;
-	int ret = 0;
-
-	if (pdata != NULL) {
-		ret = devm_gpio_request_one(&spi->dev, pdata->reset_gpio,
-				GPIOF_DIR_OUT | (!pdata->reset_inverted ?
-				GPIOF_INIT_HIGH : GPIOF_INIT_LOW),
-				"LMS283GF05 RESET");
-		if (ret)
-			return ret;
-	}
 
 	st = devm_kzalloc(&spi->dev, sizeof(struct lms283gf05_state),
 				GFP_KERNEL);
 	if (st == NULL)
 		return -ENOMEM;
 
+	st->reset = gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(st->reset))
+		return PTR_ERR(st->reset);
+	gpiod_set_consumer_name(st->reset, "LMS283GF05 RESET");
+
 	ld = devm_lcd_device_register(&spi->dev, "lms283gf05", &spi->dev, st,
 					&lms_ops);
 	if (IS_ERR(ld))
@@ -179,8 +170,8 @@ static int lms283gf05_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, st);
 
 	/* kick in the LCD */
-	if (pdata)
-		lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
+	if (st->reset)
+		lms283gf05_reset(st->reset);
 	lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
 
 	return 0;

drivers/video/backlight/qcom-wled.c

@@ -1692,7 +1692,7 @@ static int wled_probe(struct platform_device *pdev)
 
 static int wled_remove(struct platform_device *pdev)
 {
-	struct wled *wled = dev_get_drvdata(&pdev->dev);
+	struct wled *wled = platform_get_drvdata(pdev);
 
 	mutex_destroy(&wled->lock);
 	cancel_delayed_work_sync(&wled->ovp_work);

drivers/video/backlight/sky81452-backlight.c

@@ -291,7 +291,7 @@ static int sky81452_bl_probe(struct platform_device *pdev)
 	}
 
 	memset(&props, 0, sizeof(props));
-	props.max_brightness = SKY81452_MAX_BRIGHTNESS,
+	props.max_brightness = SKY81452_MAX_BRIGHTNESS;
 	name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
 	bd = devm_backlight_device_register(dev, name, dev, regmap,
 						&sky81452_bl_ops, &props);

drivers/video/fbdev/amifb.c

@@ -3736,7 +3736,7 @@ static int __init amifb_probe(struct platform_device *pdev)
 	if (err)
 		goto free_irq;
 
-	dev_set_drvdata(&pdev->dev, info);
+	platform_set_drvdata(pdev, info);
 
 	err = register_framebuffer(info);
 	if (err)
@@ -3764,7 +3764,7 @@ static int __init amifb_probe(struct platform_device *pdev)
 
 static int __exit amifb_remove(struct platform_device *pdev)
 {
-	struct fb_info *info = dev_get_drvdata(&pdev->dev);
+	struct fb_info *info = platform_get_drvdata(pdev);
 
 	unregister_framebuffer(info);
 	fb_dealloc_cmap(&info->cmap);

drivers/video/fbdev/da8xx-fb.c

@@ -1066,7 +1066,7 @@ static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par)
 
 static int fb_remove(struct platform_device *dev)
 {
-	struct fb_info *info = dev_get_drvdata(&dev->dev);
+	struct fb_info *info = platform_get_drvdata(dev);
 	struct da8xx_fb_par *par = info->par;
 	int ret;
 
@@ -1482,7 +1482,7 @@ static int fb_probe(struct platform_device *device)
 	da8xx_fb_var.activate = FB_ACTIVATE_FORCE;
 	fb_set_var(da8xx_fb_info, &da8xx_fb_var);
 
-	dev_set_drvdata(&device->dev, da8xx_fb_info);
+	platform_set_drvdata(device, da8xx_fb_info);
 
 	/* initialize the vsync wait queue */
 	init_waitqueue_head(&par->vsync_wait);

drivers/video/fbdev/imxfb.c

@@ -657,7 +657,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 static int imxfb_init_fbinfo(struct platform_device *pdev)
 {
 	struct imx_fb_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct fb_info *info = dev_get_drvdata(&pdev->dev);
+	struct fb_info *info = platform_get_drvdata(pdev);
 	struct imxfb_info *fbi = info->par;
 	struct device_node *np;
 

drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c

@@ -239,7 +239,7 @@ static struct omap_dss_driver lb035q02_ops = {
 static int lb035q02_probe_of(struct spi_device *spi)
 {
 	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct panel_drv_data *ddata = spi_get_drvdata(spi);
 	struct omap_dss_device *in;
 	struct gpio_desc *gpio;
 
@@ -277,7 +277,7 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	if (ddata == NULL)
 		return -ENOMEM;
 
-	dev_set_drvdata(&spi->dev, ddata);
+	spi_set_drvdata(spi, ddata);
 
 	ddata->spi = spi;
 
@@ -318,7 +318,7 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 
 static int lb035q02_panel_spi_remove(struct spi_device *spi)
 {
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct panel_drv_data *ddata = spi_get_drvdata(spi);
 	struct omap_dss_device *dssdev = &ddata->dssdev;
 	struct omap_dss_device *in = ddata->in;
 

drivers/video/fbdev/omap2/omapfb/dss/dpi.c

@@ -55,7 +55,7 @@ static struct dpi_data *dpi_get_data_from_dssdev(struct omap_dss_device *dssdev)
 /* only used in non-DT mode */
 static struct dpi_data *dpi_get_data_from_pdev(struct platform_device *pdev)
 {
-	return dev_get_drvdata(&pdev->dev);
+	return platform_get_drvdata(pdev);
 }
 
 static struct dss_pll *dpi_get_pll(enum omap_channel channel)
@@ -784,7 +784,7 @@ static int dpi_bind(struct device *dev, struct device *master, void *data)
 
 	dpi->pdev = pdev;
 
-	dev_set_drvdata(&pdev->dev, dpi);
+	platform_set_drvdata(pdev, dpi);
 
 	mutex_init(&dpi->lock);
 

drivers/video/fbdev/omap2/omapfb/dss/dsi.c

@@ -399,7 +399,7 @@ module_param(dsi_perf, bool, 0644);
 
 static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dsidev)
 {
-	return dev_get_drvdata(&dsidev->dev);
+	return platform_get_drvdata(dsidev);
 }
 
 static inline struct platform_device *dsi_get_dsidev_from_dssdev(struct omap_dss_device *dssdev)
@@ -5266,7 +5266,7 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
 		return -ENOMEM;
 
 	dsi->pdev = dsidev;
-	dev_set_drvdata(&dsidev->dev, dsi);
+	platform_set_drvdata(dsidev, dsi);
 
 	spin_lock_init(&dsi->irq_lock);
 	spin_lock_init(&dsi->errors_lock);

drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c

@@ -672,7 +672,7 @@ static int hdmi4_bind(struct device *dev, struct device *master, void *data)
 	int irq;
 
 	hdmi.pdev = pdev;
-	dev_set_drvdata(&pdev->dev, &hdmi);
+	platform_set_drvdata(pdev, &hdmi);
 
 	mutex_init(&hdmi.lock);
 	spin_lock_init(&hdmi.audio_playing_lock);

drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c

@@ -713,7 +713,7 @@ static int hdmi5_bind(struct device *dev, struct device *master, void *data)
 	int irq;
 
 	hdmi.pdev = pdev;
-	dev_set_drvdata(&pdev->dev, &hdmi);
+	platform_set_drvdata(pdev, &hdmi);
 
 	mutex_init(&hdmi.lock);
 	spin_lock_init(&hdmi.audio_playing_lock);

drivers/video/fbdev/xilinxfb.c

@@ -472,7 +472,7 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
 	if (of_find_property(pdev->dev.of_node, "rotate-display", NULL))
 		pdata.rotate_screen = 1;
 
-	dev_set_drvdata(&pdev->dev, drvdata);
+	platform_set_drvdata(pdev, drvdata);
 	return xilinxfb_assign(pdev, drvdata, &pdata);
 }
 

include/linux/spi/lms283gf05.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
- *
- * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
-*/
-
-#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
-#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
-
-struct lms283gf05_pdata {
-	unsigned long	reset_gpio;
-	bool		reset_inverted;
-};
-
-#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */