Commit 45130fb0 authored by Jeremy Fertic's avatar Jeremy Fertic Committed by Jonathan Cameron

staging: iio: adt7316: fix the dac read calculation

The calculation of the current dac value is using the wrong bits of the
dac lsb register. Create two macros to shift the lsb register value into
lsb position, depending on whether the dac is 10 or 12 bit. Initialize
data to 0 so, with an 8 bit dac, the msb register value can be bitwise
ORed with data.

Fixes: 35f6b6b8 ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: default avatarJeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 76b7fe8d
......@@ -47,6 +47,8 @@
#define ADT7516_MSB_AIN3 0xA
#define ADT7516_MSB_AIN4 0xB
#define ADT7316_DA_DATA_BASE 0x10
#define ADT7316_DA_10_BIT_LSB_SHIFT 6
#define ADT7316_DA_12_BIT_LSB_SHIFT 4
#define ADT7316_DA_MSB_DATA_REGS 4
#define ADT7316_LSB_DAC_A 0x10
#define ADT7316_MSB_DAC_A 0x11
......@@ -1392,7 +1394,7 @@ static IIO_DEVICE_ATTR(ex_analog_temp_offset, 0644,
static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
int channel, char *buf)
{
u16 data;
u16 data = 0;
u8 msb, lsb, offset;
int ret;
......@@ -1417,7 +1419,11 @@ static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
if (ret)
return -EIO;
data = (msb << offset) + (lsb & ((1 << offset) - 1));
if (chip->dac_bits == 12)
data = lsb >> ADT7316_DA_12_BIT_LSB_SHIFT;
else if (chip->dac_bits == 10)
data = lsb >> ADT7316_DA_10_BIT_LSB_SHIFT;
data |= msb << offset;
return sprintf(buf, "%d\n", data);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment