Commit 454b8cbe authored by Hans Verkuil's avatar Hans Verkuil Committed by Greg Kroah-Hartman

adv7511: TX_EDID_PRESENT is still 1 after a disconnect

commit b339a72e upstream.

The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present.
The adv7511 however still reported the EDID present after disconnecting
the HDMI cable. Fix the logic regarding this control. And when the EDID
is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver.
This was also missing.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 4fe401d6
......@@ -1161,12 +1161,23 @@ static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, in
}
}
static void adv7511_notify_no_edid(struct v4l2_subdev *sd)
{
struct adv7511_state *state = get_adv7511_state(sd);
struct adv7511_edid_detect ed;
/* We failed to read the EDID, so send an event for this. */
ed.present = false;
ed.segment = adv7511_rd(sd, 0xc4);
v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0);
}
static void adv7511_edid_handler(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
struct v4l2_subdev *sd = &state->sd;
struct adv7511_edid_detect ed;
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
......@@ -1191,9 +1202,7 @@ static void adv7511_edid_handler(struct work_struct *work)
}
/* We failed to read the EDID, so send an event for this. */
ed.present = false;
ed.segment = adv7511_rd(sd, 0xc4);
v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
adv7511_notify_no_edid(sd);
v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
}
......@@ -1264,7 +1273,6 @@ static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd)
/* update read only ctrls */
v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
......@@ -1294,6 +1302,7 @@ static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd)
}
adv7511_s_power(sd, false);
memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
adv7511_notify_no_edid(sd);
}
}
......@@ -1370,6 +1379,7 @@ static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
}
/* one more segment read ok */
state->edid.segments = segment + 1;
v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1);
if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
/* Request next EDID segment */
v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
......@@ -1389,7 +1399,6 @@ static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
ed.present = true;
ed.segment = 0;
state->edid_detect_counter++;
v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
return ed.present;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment