ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default

Enables MPUSS ES2 power management mode using ES2_PM_MODE in
AMBA_IF_MODE register.

0x0: OMAP5 ES1 behavior, CPU cores would enter and exit OFF mode together.
     Broken! Fortunately, we do not support this anymore.
0x1: OMAP5 ES2, DRA7 behavior, CPU cores are allowed to enter/exit OFF mode
     independently.

This is one time settings thanks to always ON domain.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[nm@ti.com: minor conflict resolutions, consolidation for DRA7]
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>

arch/arm/mach-omap2/omap-secure.h

@@ -45,6 +45,7 @@
 #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
 
 #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
+#define OMAP5_MON_AMBA_IF_INDEX		0x108
 
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -406,6 +406,7 @@ int __init omap_wakeupgen_init(void)
 {
 	int i;
 	unsigned int boot_cpu = smp_processor_id();
+	u32 val;
 
 	/* Not supported on OMAP4 ES1.0 silicon */
 	if (omap_rev() == OMAP4430_REV_ES1_0) {
@@ -451,6 +452,22 @@ int __init omap_wakeupgen_init(void)
 	for (i = 0; i < max_irqs; i++)
 		irq_target_cpu[i] = boot_cpu;
 
+	/*
+	 * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
+	 * 0x0:	ES1 behavior, CPU cores would enter and exit OFF mode together.
+	 * 0x1:	ES2 behavior, CPU cores are allowed to enter/exit OFF mode
+	 * independently.
+	 * This needs to be set one time thanks to always ON domain.
+	 *
+	 * We do not support ES1 behavior anymore. OMAP5 is assumed to be
+	 * ES2.0, and the same is applicable for DRA7.
+	 */
+	if (soc_is_omap54xx() || soc_is_dra7xx()) {
+		val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
+		val |= BIT(5);
+		omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
+	}
+
 	irq_hotplug_init();
 	irq_pm_init();
 

arch/arm/mach-omap2/omap-wakeupgen.h

@@ -27,6 +27,7 @@
 #define OMAP_WKG_ENB_E_1			0x420
 #define OMAP_AUX_CORE_BOOT_0			0x800
 #define OMAP_AUX_CORE_BOOT_1			0x804
+#define OMAP_AMBA_IF_MODE			0x80c
 #define OMAP_PTMSYNCREQ_MASK			0xc00
 #define OMAP_PTMSYNCREQ_EN			0xc04
 #define OMAP_TIMESTAMPCYCLELO			0xc08