Commit 48371cd3 authored by Srinidhi Kasagar's avatar Srinidhi Kasagar Committed by Russell King

ARM: 5845/1: l2x0: check whether l2x0 already enabled

If running in non-secure mode accessing
some registers of l2x0 will fault. So
check if l2x0 is already enabled, if so
do not access those secure registers.
Signed-off-by: default avatarsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 1f739d76
...@@ -99,8 +99,14 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) ...@@ -99,8 +99,14 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
l2x0_base = base; l2x0_base = base;
/* disable L2X0 */ /*
writel(0, l2x0_base + L2X0_CTRL); * Check if l2x0 controller is already enabled.
* If you are booting from non-secure mode
* accessing the below registers will fault.
*/
if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
/* l2x0 controller is disabled */
aux = readl(l2x0_base + L2X0_AUX_CTRL); aux = readl(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask; aux &= aux_mask;
...@@ -111,6 +117,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) ...@@ -111,6 +117,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
/* enable L2X0 */ /* enable L2X0 */
writel(1, l2x0_base + L2X0_CTRL); writel(1, l2x0_base + L2X0_CTRL);
}
outer_cache.inv_range = l2x0_inv_range; outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range; outer_cache.clean_range = l2x0_clean_range;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment