Commit 4a83eecf authored by AnilKumar Ch's avatar AnilKumar Ch Committed by Dmitry Torokhov

Input: matrix-keypad - add device tree support

Also the driver was modifued to take advantage of recent improvements in
matrix_keypad_build_keymap() implementation, which automatically allocates
memory for keymap.

The driver was tested on AM335x EVM.
Signed-off-by: default avatarAnilKumar Ch <anilkumar@ti.com>
Acked-by: default avatarRob Herring <rob.herring@calxeda.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 5383116b
* GPIO driven matrix keypad device tree bindings
GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
The matrix keypad supports multiple row and column lines, a key can be
placed at each intersection of a unique row and a unique column. The matrix
keypad can sense a key-press and key-release by means of GPIO lines and
report the event using GPIO interrupts to the cpu.
Required Properties:
- compatible: Should be "gpio-matrix-keypad"
- row-gpios: List of gpios used as row lines. The gpio specifier
for this property depends on the gpio controller to
which these row lines are connected.
- col-gpios: List of gpios used as column lines. The gpio specifier
for this property depends on the gpio controller to
which these column lines are connected.
- linux,keymap: The definition can be found at
bindings/input/matrix-keymap.txt
Optional Properties:
- linux,no-autorepeat: do no enable autorepeat feature.
- linux,wakeup: use any event on keypad as wakeup event.
- debounce-delay-ms: debounce interval in milliseconds
- col-scan-delay-us: delay, measured in microseconds, that is needed
before we can scan keypad after activating column gpio
Example:
matrix-keypad {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio2 25 0
&gpio2 26 0
&gpio2 27 0>;
col-gpios = <&gpio2 21 0
&gpio2 22 0>;
linux,keymap = <0x0000008B
0x0100009E
0x02000069
0x0001006A
0x0101001C
0x0201006C>;
};
......@@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_platform.h>
struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
......@@ -37,8 +40,6 @@ struct matrix_keypad {
bool scan_pending;
bool stopped;
bool gpio_all_disabled;
unsigned short keycodes[];
};
/*
......@@ -118,6 +119,7 @@ static void matrix_keypad_scan(struct work_struct *work)
struct matrix_keypad *keypad =
container_of(work, struct matrix_keypad, work.work);
struct input_dev *input_dev = keypad->input_dev;
const unsigned short *keycodes = input_dev->keycode;
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
uint32_t new_state[MATRIX_MAX_COLS];
int row, col, code;
......@@ -153,7 +155,7 @@ static void matrix_keypad_scan(struct work_struct *work)
code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
keypad->keycodes[code],
keycodes[code],
new_state[col] & (1 << row));
}
}
......@@ -394,33 +396,95 @@ static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
gpio_free(pdata->col_gpios[i]);
}
#ifdef CONFIG_OF
static struct matrix_keypad_platform_data * __devinit
matrix_keypad_parse_dt(struct device *dev)
{
struct matrix_keypad_platform_data *pdata;
struct device_node *np = dev->of_node;
unsigned int *gpios;
int i;
if (!np) {
dev_err(dev, "device lacks DT data\n");
return ERR_PTR(-ENODEV);
}
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(dev, "could not allocate memory for platform data\n");
return ERR_PTR(-ENOMEM);
}
pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios");
pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios");
if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
dev_err(dev, "number of keypad rows/columns not specified\n");
return ERR_PTR(-EINVAL);
}
if (of_get_property(np, "linux,no-autorepeat", NULL))
pdata->no_autorepeat = true;
if (of_get_property(np, "linux,wakeup", NULL))
pdata->wakeup = true;
if (of_get_property(np, "gpio-activelow", NULL))
pdata->active_low = true;
of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
of_property_read_u32(np, "col-scan-delay-us",
&pdata->col_scan_delay_us);
gpios = devm_kzalloc(dev,
sizeof(unsigned int) *
(pdata->num_row_gpios + pdata->num_col_gpios),
GFP_KERNEL);
if (!gpios) {
dev_err(dev, "could not allocate memory for gpios\n");
return ERR_PTR(-ENOMEM);
}
for (i = 0; i < pdata->num_row_gpios; i++)
gpios[i] = of_get_named_gpio(np, "row-gpios", i);
for (i = 0; i < pdata->num_col_gpios; i++)
gpios[pdata->num_row_gpios + i] =
of_get_named_gpio(np, "col-gpios", i);
pdata->row_gpios = gpios;
pdata->col_gpios = &gpios[pdata->num_row_gpios];
return pdata;
}
#else
static inline struct matrix_keypad_platform_data *
matrix_keypad_parse_dt(struct device *dev)
{
dev_err(dev, "no platform data defined\n");
return ERR_PTR(-EINVAL);
}
#endif
static int __devinit matrix_keypad_probe(struct platform_device *pdev)
{
const struct matrix_keypad_platform_data *pdata;
const struct matrix_keymap_data *keymap_data;
struct matrix_keypad *keypad;
struct input_dev *input_dev;
unsigned int row_shift;
size_t keymap_size;
int err;
pdata = pdev->dev.platform_data;
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
pdata = matrix_keypad_parse_dt(&pdev->dev);
if (IS_ERR(pdata)) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
return PTR_ERR(pdata);
}
keymap_data = pdata->keymap_data;
if (!keymap_data) {
} else if (!pdata->keymap_data) {
dev_err(&pdev->dev, "no keymap data defined\n");
return -EINVAL;
}
row_shift = get_count_order(pdata->num_col_gpios);
keymap_size = (pdata->num_row_gpios << row_shift) *
sizeof(keypad->keycodes[0]);
keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
GFP_KERNEL);
keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !input_dev) {
err = -ENOMEM;
......@@ -429,7 +493,7 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
keypad->input_dev = input_dev;
keypad->pdata = pdata;
keypad->row_shift = row_shift;
keypad->row_shift = get_count_order(pdata->num_col_gpios);
keypad->stopped = true;
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
spin_lock_init(&keypad->lock);
......@@ -440,12 +504,14 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
input_dev->open = matrix_keypad_start;
input_dev->close = matrix_keypad_stop;
err = matrix_keypad_build_keymap(keymap_data, NULL,
err = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
pdata->num_row_gpios,
pdata->num_col_gpios,
keypad->keycodes, input_dev);
if (err)
NULL, input_dev);
if (err) {
dev_err(&pdev->dev, "failed to build keymap\n");
goto err_free_mem;
}
if (!pdata->no_autorepeat)
__set_bit(EV_REP, input_dev->evbit);
......@@ -488,6 +554,14 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id matrix_keypad_dt_match[] = {
{ .compatible = "gpio-matrix-keypad" },
{ }
};
MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
#endif
static struct platform_driver matrix_keypad_driver = {
.probe = matrix_keypad_probe,
.remove = __devexit_p(matrix_keypad_remove),
......@@ -495,6 +569,7 @@ static struct platform_driver matrix_keypad_driver = {
.name = "matrix-keypad",
.owner = THIS_MODULE,
.pm = &matrix_keypad_pm_ops,
.of_match_table = of_match_ptr(matrix_keypad_dt_match),
},
};
module_platform_driver(matrix_keypad_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment