Merge git://git.tuxdriver.com/git/netdev-jwl

4aefe155 · Jeff Garzik · f912696a · d3808760 · 4aefe155 · 4aefe155
Commit 4aefe155 authored Nov 05, 2005 by Jeff Garzik
18 changed files
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -1449,8 +1449,9 @@ struct l2_fhdr {
 #define BNX2_EMAC_MODE_PORT_NONE			 (0L<<2)
 #define BNX2_EMAC_MODE_PORT_MII				 (1L<<2)
 #define BNX2_EMAC_MODE_PORT_GMII			 (2L<<2)
-#define BNX2_EMAC_MODE_PORT_UNDEF			 (3L<<2)
+#define BNX2_EMAC_MODE_PORT_MII_10			 (3L<<2)
 #define BNX2_EMAC_MODE_MAC_LOOP				 (1L<<4)
+#define BNX2_EMAC_MODE_25G				 (1L<<5)
 #define BNX2_EMAC_MODE_TAGGED_MAC_CTL			 (1L<<7)
 #define BNX2_EMAC_MODE_TX_BURST				 (1L<<8)
 #define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA		 (1L<<9)
@@ -3714,6 +3715,15 @@ struct l2_fhdr {
 #define BNX2_MCP_ROM					0x00150000
 #define BNX2_MCP_SCRATCH				0x00160000

+#define BNX2_SHM_HDR_SIGNATURE				BNX2_MCP_SCRATCH
+#define BNX2_SHM_HDR_SIGNATURE_SIG_MASK			 0xffff0000
+#define BNX2_SHM_HDR_SIGNATURE_SIG			 0x53530000
+#define BNX2_SHM_HDR_SIGNATURE_VER_MASK			 0x000000ff
+#define BNX2_SHM_HDR_SIGNATURE_VER_ONE			 0x00000001
+
+#define BNX2_SHM_HDR_ADDR_0				BNX2_MCP_SCRATCH + 4
+#define BNX2_SHM_HDR_ADDR_1				BNX2_MCP_SCRATCH + 8
+

 #define NUM_MC_HASH_REGISTERS   8

@@ -3724,6 +3734,53 @@ struct l2_fhdr {
 #define PHY_ID(id)                                  ((id) & 0xfffffff0)
 #define PHY_REV_ID(id)                              ((id) & 0xf)

+/* 5708 Serdes PHY registers */
+
+#define BCM5708S_UP1				0xb
+
+#define BCM5708S_UP1_2G5			0x1
+
+#define BCM5708S_BLK_ADDR			0x1f
+
+#define BCM5708S_BLK_ADDR_DIG			0x0000
+#define BCM5708S_BLK_ADDR_DIG3			0x0002
+#define BCM5708S_BLK_ADDR_TX_MISC		0x0005
+
+/* Digital Block */
+#define BCM5708S_1000X_CTL1			0x10
+
+#define BCM5708S_1000X_CTL1_FIBER_MODE		0x0001
+#define BCM5708S_1000X_CTL1_AUTODET_EN		0x0010
+
+#define BCM5708S_1000X_CTL2			0x11
+
+#define BCM5708S_1000X_CTL2_PLLEL_DET_EN	0x0001
+
+#define BCM5708S_1000X_STAT1			0x14
+
+#define BCM5708S_1000X_STAT1_SGMII		0x0001
+#define BCM5708S_1000X_STAT1_LINK		0x0002
+#define BCM5708S_1000X_STAT1_FD			0x0004
+#define BCM5708S_1000X_STAT1_SPEED_MASK		0x0018
+#define BCM5708S_1000X_STAT1_SPEED_10		0x0000
+#define BCM5708S_1000X_STAT1_SPEED_100		0x0008
+#define BCM5708S_1000X_STAT1_SPEED_1G		0x0010
+#define BCM5708S_1000X_STAT1_SPEED_2G5		0x0018
+#define BCM5708S_1000X_STAT1_TX_PAUSE		0x0020
+#define BCM5708S_1000X_STAT1_RX_PAUSE		0x0040
+
+/* Digital3 Block */
+#define BCM5708S_DIG_3_0			0x10
+
+#define BCM5708S_DIG_3_0_USE_IEEE		0x0001
+
+/* Tx/Misc Block */
+#define BCM5708S_TX_ACTL1			0x15
+
+#define BCM5708S_TX_ACTL1_DRIVER_VCM		0x30
+
+#define BCM5708S_TX_ACTL3			0x17
+
 #define MIN_ETHERNET_PACKET_SIZE	60
 #define MAX_ETHERNET_PACKET_SIZE	1514
 #define MAX_ETHERNET_JUMBO_PACKET_SIZE	9014
@@ -3799,7 +3856,7 @@ struct sw_bd {
 #define BUFFERED_FLASH_PHY_PAGE_SIZE		(1 << BUFFERED_FLASH_PAGE_BITS)
 #define BUFFERED_FLASH_BYTE_ADDR_MASK		(BUFFERED_FLASH_PHY_PAGE_SIZE-1)
 #define BUFFERED_FLASH_PAGE_SIZE		264
-#define BUFFERED_FLASH_TOTAL_SIZE		131072
+#define BUFFERED_FLASH_TOTAL_SIZE		0x21000

 #define SAIFUN_FLASH_PAGE_BITS			8
 #define SAIFUN_FLASH_PHY_PAGE_SIZE		(1 << SAIFUN_FLASH_PAGE_BITS)
@@ -3807,6 +3864,12 @@ struct sw_bd {
 #define SAIFUN_FLASH_PAGE_SIZE			256
 #define SAIFUN_FLASH_BASE_TOTAL_SIZE		65536

+#define ST_MICRO_FLASH_PAGE_BITS		8
+#define ST_MICRO_FLASH_PHY_PAGE_SIZE		(1 << ST_MICRO_FLASH_PAGE_BITS)
+#define ST_MICRO_FLASH_BYTE_ADDR_MASK		(ST_MICRO_FLASH_PHY_PAGE_SIZE-1)
+#define ST_MICRO_FLASH_PAGE_SIZE		256
+#define ST_MICRO_FLASH_BASE_TOTAL_SIZE		65536
+
 #define NVRAM_TIMEOUT_COUNT			30000


@@ -3815,6 +3878,8 @@ struct sw_bd {
 						 BNX2_NVM_CFG1_PROTECT_MODE | \
 						 BNX2_NVM_CFG1_FLASH_SIZE)

+#define FLASH_BACKUP_STRAP_MASK			(0xf << 26)
+
 struct flash_spec {
 	u32 strapping;
 	u32 config1;
@@ -3849,6 +3914,9 @@ struct bnx2 {
 	u16			tx_cons;
 	int			tx_ring_size;

+	u16			hw_tx_cons;
+	u16			hw_rx_cons;
+
 #ifdef BCM_VLAN 
 	struct			vlan_group *vlgrp;
 #endif
@@ -3893,6 +3961,7 @@ struct bnx2 {
 #define PHY_SERDES_FLAG			1
 #define PHY_CRC_FIX_FLAG		2
 #define PHY_PARALLEL_DETECT_FLAG	4
+#define PHY_2_5G_CAPABLE_FLAG		8
 #define PHY_INT_MODE_MASK_FLAG		0x300
 #define PHY_INT_MODE_AUTO_POLLING_FLAG	0x100
 #define PHY_INT_MODE_LINK_READY_FLAG	0x200
@@ -3901,6 +3970,7 @@ struct bnx2 {
 	/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
 #define CHIP_NUM(bp)			(((bp)->chip_id) & 0xffff0000)
 #define CHIP_NUM_5706			0x57060000
+#define CHIP_NUM_5708			0x57080000

 #define CHIP_REV(bp)			(((bp)->chip_id) & 0x0000f000)
 #define CHIP_REV_Ax			0x00000000
@@ -3913,6 +3983,9 @@ struct bnx2 {
 #define CHIP_ID(bp)			(((bp)->chip_id) & 0xfffffff0)
 #define CHIP_ID_5706_A0			0x57060000
 #define CHIP_ID_5706_A1			0x57060010
+#define CHIP_ID_5706_A2			0x57060020
+#define CHIP_ID_5708_A0			0x57080000
+#define CHIP_ID_5708_B0			0x57081000

 #define CHIP_BOND_ID(bp)		(((bp)->chip_id) & 0xf)

@@ -3991,6 +4064,8 @@ struct bnx2 {

 	u8			mac_addr[8];

+	u32			shmem_base;
+
 	u32			fw_ver;

 	int			pm_cap;
@@ -4130,14 +4205,46 @@ struct fw_info {
 #define BNX2_FW_MSG_STATUS_FAILURE		 0x00ff0000

 #define BNX2_LINK_STATUS			0x0000000c
+#define BNX2_LINK_STATUS_INIT_VALUE		 0xffffffff 
+#define BNX2_LINK_STATUS_LINK_UP		 0x1 
+#define BNX2_LINK_STATUS_LINK_DOWN		 0x0 
+#define BNX2_LINK_STATUS_SPEED_MASK		 0x1e
+#define BNX2_LINK_STATUS_AN_INCOMPLETE		 (0<<1) 
+#define BNX2_LINK_STATUS_10HALF			 (1<<1) 
+#define BNX2_LINK_STATUS_10FULL			 (2<<1) 
+#define BNX2_LINK_STATUS_100HALF		 (3<<1) 
+#define BNX2_LINK_STATUS_100BASE_T4		 (4<<1) 
+#define BNX2_LINK_STATUS_100FULL		 (5<<1) 
+#define BNX2_LINK_STATUS_1000HALF		 (6<<1) 
+#define BNX2_LINK_STATUS_1000FULL		 (7<<1) 
+#define BNX2_LINK_STATUS_2500HALF		 (8<<1) 
+#define BNX2_LINK_STATUS_2500FULL		 (9<<1) 
+#define BNX2_LINK_STATUS_AN_ENABLED		 (1<<5) 
+#define BNX2_LINK_STATUS_AN_COMPLETE		 (1<<6) 
+#define BNX2_LINK_STATUS_PARALLEL_DET		 (1<<7) 
+#define BNX2_LINK_STATUS_RESERVED		 (1<<8) 
+#define BNX2_LINK_STATUS_PARTNER_AD_1000FULL	 (1<<9) 
+#define BNX2_LINK_STATUS_PARTNER_AD_1000HALF	 (1<<10) 
+#define BNX2_LINK_STATUS_PARTNER_AD_100BT4	 (1<<11) 
+#define BNX2_LINK_STATUS_PARTNER_AD_100FULL	 (1<<12) 
+#define BNX2_LINK_STATUS_PARTNER_AD_100HALF	 (1<<13) 
+#define BNX2_LINK_STATUS_PARTNER_AD_10FULL	 (1<<14) 
+#define BNX2_LINK_STATUS_PARTNER_AD_10HALF	 (1<<15) 
+#define BNX2_LINK_STATUS_TX_FC_ENABLED		 (1<<16) 
+#define BNX2_LINK_STATUS_RX_FC_ENABLED		 (1<<17) 
+#define BNX2_LINK_STATUS_PARTNER_SYM_PAUSE_CAP	 (1<<18) 
+#define BNX2_LINK_STATUS_PARTNER_ASYM_PAUSE_CAP	 (1<<19) 
+#define BNX2_LINK_STATUS_SERDES_LINK		 (1<<20) 
+#define BNX2_LINK_STATUS_PARTNER_AD_2500FULL	 (1<<21) 
+#define BNX2_LINK_STATUS_PARTNER_AD_2500HALF	 (1<<22) 

 #define BNX2_DRV_PULSE_MB			0x00000010
-#define BNX2_DRV_PULSE_SEQ_MASK			 0x0000ffff
+#define BNX2_DRV_PULSE_SEQ_MASK			 0x00007fff

 /* Indicate to the firmware not to go into the
 * OS absent when it is not getting driver pulse.
 * This is used for debugging. */
-#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE	 0x00010000
+#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE	 0x00080000

 #define BNX2_DEV_INFO_SIGNATURE			0x00000020
 #define BNX2_DEV_INFO_SIGNATURE_MAGIC		 0x44564900
@@ -4160,6 +4267,8 @@ struct fw_info {
 #define BNX2_SHARED_HW_CFG_DESIGN_LOM		 0x1
 #define BNX2_SHARED_HW_CFG_PHY_COPPER		 0
 #define BNX2_SHARED_HW_CFG_PHY_FIBER		 0x2
+#define BNX2_SHARED_HW_CFG_PHY_2_5G		 0x20
+#define BNX2_SHARED_HW_CFG_PHY_BACKPLANE	 0x40
 #define BNX2_SHARED_HW_CFG_LED_MODE_SHIFT_BITS	 8
 #define BNX2_SHARED_HW_CFG_LED_MODE_MASK	 0x300
 #define BNX2_SHARED_HW_CFG_LED_MODE_MAC		 0
@@ -4173,9 +4282,11 @@ struct fw_info {

 #define BNX2_PORT_HW_CFG_MAC_LOWER		0x00000054
 #define BNX2_PORT_HW_CFG_CONFIG			0x00000058
+#define BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK	 0x0000ffff
 #define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK	 0x001f0000
 #define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_AN	 0x00000000
 #define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G	 0x00030000
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_2_5G	 0x00040000

 #define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER	0x00000068
 #define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER	0x0000006c

--- a/drivers/net/bnx2_fw.h
+++ b/drivers/net/bnx2_fw.h
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1739,7 +1739,7 @@ e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
 	}
 }

-struct ethtool_ops e1000_ethtool_ops = {
+static struct ethtool_ops e1000_ethtool_ops = {
 	.get_settings           = e1000_get_settings,
 	.set_settings           = e1000_set_settings,
 	.get_drvinfo            = e1000_get_drvinfo,

--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -284,7 +284,6 @@ typedef enum {
 /* Initialization */
 int32_t e1000_reset_hw(struct e1000_hw *hw);
 int32_t e1000_init_hw(struct e1000_hw *hw);
-int32_t e1000_id_led_init(struct e1000_hw * hw);
 int32_t e1000_set_mac_type(struct e1000_hw *hw);
 void e1000_set_media_type(struct e1000_hw *hw);

@@ -292,10 +291,8 @@ void e1000_set_media_type(struct e1000_hw *hw);
 int32_t e1000_setup_link(struct e1000_hw *hw);
 int32_t e1000_phy_setup_autoneg(struct e1000_hw *hw);
 void e1000_config_collision_dist(struct e1000_hw *hw);
-int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw);
 int32_t e1000_check_for_link(struct e1000_hw *hw);
 int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t * speed, uint16_t * duplex);
-int32_t e1000_wait_autoneg(struct e1000_hw *hw);
 int32_t e1000_force_mac_fc(struct e1000_hw *hw);

 /* PHY */
@@ -303,21 +300,11 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy
 int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
 int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 int32_t e1000_phy_reset(struct e1000_hw *hw);
-int32_t e1000_detect_gig_phy(struct e1000_hw *hw);
 int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length);
-int32_t e1000_check_polarity(struct e1000_hw *hw, uint16_t *polarity);
-int32_t e1000_check_downshift(struct e1000_hw *hw);
 int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);

 /* EEPROM Functions */
 int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
-boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
-int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);

 /* MNG HOST IF functions */
 uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
@@ -377,13 +364,6 @@ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
 							uint16_t length);
 boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
 boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-int32_t e1000_mng_enable_host_if(struct e1000_hw *hw);
-int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer,
-                            uint16_t length, uint16_t offset, uint8_t *sum);
-int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, 
-                                   struct e1000_host_mng_command_header* hdr);
-
-int32_t e1000_mng_write_commit(struct e1000_hw *hw);

 int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
 int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw);
@@ -395,13 +375,10 @@ int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
 void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);

 /* Filters (multicast, vlan, receive) */
-void e1000_init_rx_addrs(struct e1000_hw *hw);
-void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
 uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr);
 void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value);
 void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index);
 void e1000_write_vfta(struct e1000_hw *hw, uint32_t offset, uint32_t value);
-void e1000_clear_vfta(struct e1000_hw *hw);

 /* LED functions */
 int32_t e1000_setup_led(struct e1000_hw *hw);
@@ -412,7 +389,6 @@ int32_t e1000_led_off(struct e1000_hw *hw);
 /* Adaptive IFS Functions */

 /* Everything else */
-void e1000_clear_hw_cntrs(struct e1000_hw *hw);
 void e1000_reset_adaptive(struct e1000_hw *hw);
 void e1000_update_adaptive(struct e1000_hw *hw);
 void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, uint32_t frame_len, uint8_t * mac_addr);
@@ -423,29 +399,11 @@ void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 /* Port I/O is only supported on 82544 and newer */
 uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port);
-uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset);
 void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
-void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
-int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up);
-int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active);
-int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active);
-void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
-void e1000_enable_pciex_master(struct e1000_hw *hw);
 int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
-int32_t e1000_get_auto_rd_done(struct e1000_hw *hw);
-int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw);
 int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
 void e1000_release_software_semaphore(struct e1000_hw *hw);
 int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
-int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
-void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
-int32_t e1000_commit_shadow_ram(struct e1000_hw *hw);
-uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw);
-
-#define E1000_READ_REG_IO(a, reg) \
-    e1000_read_reg_io((a), E1000_##reg)
-#define E1000_WRITE_REG_IO(a, reg, val) \
-    e1000_write_reg_io((a), E1000_##reg, val)

 /* PCI Device IDs */
 #define E1000_DEV_ID_82542               0x1000

--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -37,7 +37,7 @@
 */

 char e1000_driver_name[] = "e1000";
-char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #ifndef CONFIG_E1000_NAPI
 #define DRIVERNAPI
 #else
@@ -45,7 +45,7 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #endif
 #define DRV_VERSION "6.1.16-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
-char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
+static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";

 /* e1000_pci_tbl - PCI Device ID Table
 *
@@ -112,13 +112,13 @@ int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
-int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 				    struct e1000_tx_ring *txdr);
-int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 				    struct e1000_rx_ring *rxdr);
-void e1000_free_tx_resources(struct e1000_adapter *adapter,
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
 				    struct e1000_tx_ring *tx_ring);
-void e1000_free_rx_resources(struct e1000_adapter *adapter,
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
 				    struct e1000_rx_ring *rx_ring);
 void e1000_update_stats(struct e1000_adapter *adapter);

@@ -296,7 +296,8 @@ e1000_irq_enable(struct e1000_adapter *adapter)
 		E1000_WRITE_FLUSH(&adapter->hw);
 	}
 }
-void
+
+static void
 e1000_update_mng_vlan(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -1141,7 +1142,7 @@ e1000_check_64k_bound(struct e1000_adapter *adapter,
 * Return 0 on success, negative on failure
 **/

-int
+static int
 e1000_setup_tx_resources(struct e1000_adapter *adapter,
                         struct e1000_tx_ring *txdr)
 {
@@ -1359,7 +1360,7 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 * Returns 0 on success, negative on failure
 **/

-int
+static int
 e1000_setup_rx_resources(struct e1000_adapter *adapter,
                         struct e1000_rx_ring *rxdr)
 {
@@ -1747,7 +1748,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
 * Free all transmit software resources
 **/

-void
+static void
 e1000_free_tx_resources(struct e1000_adapter *adapter,
                        struct e1000_tx_ring *tx_ring)
 {
@@ -1858,7 +1859,7 @@ e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
 * Free all receive software resources
 **/

-void
+static void
 e1000_free_rx_resources(struct e1000_adapter *adapter,
                        struct e1000_rx_ring *rx_ring)
 {

--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -311,16 +311,6 @@ static void __exit dmascc_exit(void)
 	}
 }

-#ifndef MODULE
-void __init dmascc_setup(char *str, int *ints)
-{
-	int i;
-
-	for (i = 0; i < MAX_NUM_DEVS && i < ints[0]; i++)
-		io[i] = ints[i + 1];
-}
-#endif
-
 static int __init dmascc_init(void)
 {
 	int h, i, j, n;

--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -694,7 +694,7 @@ ixgb_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
 	}
 }

-struct ethtool_ops ixgb_ethtool_ops = {
+static struct ethtool_ops ixgb_ethtool_ops = {
 	.get_settings = ixgb_get_settings,
 	.set_settings = ixgb_set_settings,
 	.get_drvinfo = ixgb_get_drvinfo,

--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -47,9 +47,22 @@ static void ixgb_optics_reset(struct ixgb_hw *hw);

 static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw);

-uint32_t ixgb_mac_reset(struct ixgb_hw *hw);
+static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);

-uint32_t ixgb_mac_reset(struct ixgb_hw *hw)
+static void ixgb_clear_vfta(struct ixgb_hw *hw);
+
+static void ixgb_init_rx_addrs(struct ixgb_hw *hw);
+
+static uint16_t ixgb_read_phy_reg(struct ixgb_hw *hw,
+				  uint32_t reg_address,
+				  uint32_t phy_address,
+				  uint32_t device_type);
+
+static boolean_t ixgb_setup_fc(struct ixgb_hw *hw);
+
+static boolean_t mac_addr_valid(uint8_t *mac_addr);
+
+static uint32_t ixgb_mac_reset(struct ixgb_hw *hw)
 {
 	uint32_t ctrl_reg;

@@ -335,7 +348,7 @@ ixgb_init_hw(struct ixgb_hw *hw)
 * of the receive addresss registers. Clears the multicast table. Assumes
 * the receiver is in reset when the routine is called.
 *****************************************************************************/
-void
+static void
 ixgb_init_rx_addrs(struct ixgb_hw *hw)
 {
 	uint32_t i;
@@ -604,7 +617,7 @@ ixgb_write_vfta(struct ixgb_hw *hw,
 *
 * hw - Struct containing variables accessed by shared code
 *****************************************************************************/
-void
+static void
 ixgb_clear_vfta(struct ixgb_hw *hw)
 {
 	uint32_t offset;
@@ -620,7 +633,7 @@ ixgb_clear_vfta(struct ixgb_hw *hw)
 * hw - Struct containing variables accessed by shared code
 *****************************************************************************/

-boolean_t
+static boolean_t
 ixgb_setup_fc(struct ixgb_hw *hw)
 {
 	uint32_t ctrl_reg;
@@ -722,7 +735,7 @@ ixgb_setup_fc(struct ixgb_hw *hw)
 * This requires that first an address cycle command is sent, followed by a
 * read command.
 *****************************************************************************/
-uint16_t
+static uint16_t
 ixgb_read_phy_reg(struct ixgb_hw *hw,
 		uint32_t reg_address,
 		uint32_t phy_address,
@@ -815,7 +828,7 @@ ixgb_read_phy_reg(struct ixgb_hw *hw,
 * This requires that first an address cycle command is sent, followed by a
 * write command.
 *****************************************************************************/
-void
+static void
 ixgb_write_phy_reg(struct ixgb_hw *hw,
 			uint32_t reg_address,
 			uint32_t phy_address,
@@ -959,7 +972,7 @@ boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 *****************************************************************************/
-void
+static void
 ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
 {
 	volatile uint32_t temp_reg;
@@ -1114,7 +1127,7 @@ ixgb_get_bus_info(struct ixgb_hw *hw)
 * mac_addr - pointer to MAC address.
 *
 *****************************************************************************/
-boolean_t
+static boolean_t
 mac_addr_valid(uint8_t *mac_addr)
 {
 	boolean_t is_valid = TRUE;

--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -784,23 +784,8 @@ struct ixgb_hw_stats {
 extern boolean_t ixgb_adapter_stop(struct ixgb_hw *hw);
 extern boolean_t ixgb_init_hw(struct ixgb_hw *hw);
 extern boolean_t ixgb_adapter_start(struct ixgb_hw *hw);
-extern void ixgb_init_rx_addrs(struct ixgb_hw *hw);
 extern void ixgb_check_for_link(struct ixgb_hw *hw);
 extern boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw);
-extern boolean_t ixgb_setup_fc(struct ixgb_hw *hw);
-extern void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);
-extern boolean_t mac_addr_valid(uint8_t *mac_addr);
-
-extern uint16_t ixgb_read_phy_reg(struct ixgb_hw *hw,
-				uint32_t reg_addr,
-				uint32_t phy_addr,
-				uint32_t device_type);
-
-extern void ixgb_write_phy_reg(struct ixgb_hw *hw,
-				uint32_t reg_addr,
-				uint32_t phy_addr,
-				uint32_t device_type,
-				uint16_t data);

 extern void ixgb_rar_set(struct ixgb_hw *hw,
 				uint8_t *addr,
@@ -818,8 +803,6 @@ extern void ixgb_write_vfta(struct ixgb_hw *hw,
 				 uint32_t offset,
 				 uint32_t value);

-extern void ixgb_clear_vfta(struct ixgb_hw *hw);
-
 /* Access functions to eeprom data */
 void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr);
 uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw);

--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -45,7 +45,7 @@
 */

 char ixgb_driver_name[] = "ixgb";
-char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
+static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";

 #ifndef CONFIG_IXGB_NAPI
 #define DRIVERNAPI

--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -47,6 +47,8 @@
 #include <linux/pci.h>
 #include <asm/uaccess.h>

+#include "airo.h"
+
 #ifdef CONFIG_PCI
 static struct pci_device_id card_ids[] = {
 	{ 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },

--- a/drivers/net/wireless/airo.h
+++ b/drivers/net/wireless/airo.h
+#ifndef _AIRO_H_
+#define _AIRO_H_
+
+struct net_device *init_airo_card(unsigned short irq, int port, int is_pcmcia,
+				  struct device *dmdev);
+int reset_airo_card(struct net_device *dev);
+void stop_airo_card(struct net_device *dev, int freeres);
+
+#endif  /*  _AIRO_H_  */
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -42,6 +42,8 @@
 #include <asm/io.h>
 #include <asm/system.h>

+#include "airo.h"
+
 /*
   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
   you do not define PCMCIA_DEBUG at all, all the debug code will be
@@ -78,10 +80,6 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
   event handler. 
 */

-struct net_device *init_airo_card( int, int, int, struct device * );
-void stop_airo_card( struct net_device *, int );
-int reset_airo_card( struct net_device * );
-
 static void airo_config(dev_link_t *link);
 static void airo_release(dev_link_t *link);
 static int airo_event(event_t event, int priority,

--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -244,7 +244,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	priv->statistics.tx_dropped++;
 	spin_unlock_irqrestore(&priv->slock, flags);
 	dev_kfree_skb(skb);
-	skb = NULL;
 	return err;
 }


--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -453,10 +453,11 @@ struct ethtool_ops {
 * it was foced up into this mode or autonegotiated.
 */

-/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
 #define SPEED_10		10
 #define SPEED_100		100
 #define SPEED_1000		1000
+#define SPEED_2500		2500
 #define SPEED_10000		10000

 /* Duplex, half or full. */

--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1785,6 +1785,7 @@
 #define PCI_DEVICE_ID_TIGON3_5704	0x1648
 #define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
 #define PCI_DEVICE_ID_NX2_5706		0x164a
+#define PCI_DEVICE_ID_NX2_5708		0x164c
 #define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
 #define PCI_DEVICE_ID_TIGON3_5705	0x1653
 #define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
@@ -1809,6 +1810,7 @@
 #define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
 #define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
 #define PCI_DEVICE_ID_NX2_5706S		0x16aa
+#define PCI_DEVICE_ID_NX2_5708S		0x16ac
 #define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
 #define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
 #define PCI_DEVICE_ID_TIGON3_5781	0x16dd