Skip to content

L
linux
Commit 4b3d4d3d authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge branch 'at91/cleanup' into next/drivers 

This resolves some of the obvious conflicts between the at91 cleanup and
drivers branches.

Conflicts:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-at91/at91sam9rl.c
	drivers/rtc/Kconfig
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents b9e0e5a9 bcf8c7e7
Show whitespace changes
Inline Side-by-side
Showing with 5 additions and 5571 deletions
arch/arm/configs/at91sam9g45_defconfig deleted 100644 → 0
View file @ b9e0e5a9
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_IPV6_SIT_6RD=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MACB=y
CONFIG_DAVICOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
CONFIG_SND_ATMEL_AC97C=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ATMEL_USBA=y
CONFIG_USB_G_MULTI=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_DMATEST=m
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_FONTS=y
arch/arm/configs/at91sam9rl_defconfig deleted 100644 → 0
View file @ b9e0e5a9
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9RL=y
CONFIG_MACH_AT91SAM9RLEK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_USB_GADGET=y
CONFIG_USB_ATMEL_USBA=y
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/at91x40_defconfig deleted 100644 → 0
View file @ b9e0e5a9
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_HOTPLUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_TIMERFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MMU is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91X40=y
CONFIG_MACH_AT91EB01=y
CONFIG_AT91_EARLY_USART0=y
CONFIG_CPU_ARM7TDMI=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x01000000
CONFIG_DRAM_SIZE=0x00400000
CONFIG_FLASH_MEM_BASE=0x01400000
CONFIG_PROCESSOR_ID=0x14000040
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_BINFMT_FLAT=y
# CONFIG_SUSPEND is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_FS=y
# CONFIG_ENABLE_MUST_CHECK is not set
arch/arm/mach-at91/Kconfig
View file @ 4b3d4d3d
......@@ -18,18 +18,14 @@ config HAVE_AT91_DBGU2
config AT91_USE_OLD_CLK
bool
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
config COMMON_CLK_AT91
bool
default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
default USE_OF && !AT91_USE_OLD_CLK
select COMMON_CLK
config OLD_CLK_AT91
bool
default AT91_PMC_UNIT && AT91_USE_OLD_CLK
default AT91_USE_OLD_CLK
config OLD_IRQ_AT91
bool
......@@ -65,16 +61,6 @@ choice
prompt "Core type"
config ARCH_AT91X40
bool "ARM7 AT91X40"
depends on !MMU
select CPU_ARM7TDMI
select ARCH_USES_GETTIMEOFFSET
select OLD_IRQ_AT91
help
Select this if you are using one of Atmel's AT91X40 SoC.
config SOC_SAM_V4_V5
bool "ARM9 AT91SAM9/AT91RM9200"
help
......@@ -199,7 +185,7 @@ config SOC_AT91SAM9N12
endif # SOC_SAM_V4_V5
if SOC_SAM_V4_V5 || ARCH_AT91X40
if SOC_SAM_V4_V5
source arch/arm/mach-at91/Kconfig.non_dt
endif
......
arch/arm/mach-at91/Kconfig.non_dt
View file @ 4b3d4d3d
......@@ -5,7 +5,6 @@ config HAVE_AT91_DATAFLASH_CARD
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
depends on !ARCH_AT91X40
config ARCH_AT91_NONE
bool "None"
......@@ -34,18 +33,6 @@ config ARCH_AT91SAM9263
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
endchoice
config ARCH_AT91SAM9G20
......@@ -288,51 +275,6 @@ endif
# ----------------------------------------------------------
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
......
arch/arm/mach-at91/Makefile
View file @ 4b3d4d3d
......@@ -24,9 +24,6 @@ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
......@@ -58,9 +55,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
......@@ -72,9 +66,6 @@ obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
......@@ -82,9 +73,6 @@ obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# SAMA5 board with device-tree
obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
# Drivers
obj-y += leds.o
......
arch/arm/mach-at91/at91sam9g45.c
View file @ 4b3d4d3d
......@@ -10,358 +10,12 @@
*
*/
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "sam9_smc.h"
#include "pm.h"
#if defined(CONFIG_OLD_CLK_AT91)
#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioDE_clk = {
.name = "pioDE_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk trng_clk = {
.name = "trng_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TRNG,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US3,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi0_clk = {
.name = "spi0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi1_clk = {
.name = "spi1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TCB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pwm_clk = {
.name = "pwm_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tsc_clk = {
.name = "tsc_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TSC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma_clk = {
.name = "dma_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_DMA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
.name = "uhphs_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ac97_clk = {
.name = "ac97_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "pclk",
.pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk isi_clk = {
.name = "isi_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_ISI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc1_clk = {
.name = "mci1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
.type = CLK_TYPE_PERIPHERAL,
};
/* Video decoder clock - Only for sam9m10/sam9m11 */
static struct clk vdec_clk = {
.name = "vdec_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_VDEC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 300000,
};
/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
static struct clk aestdessha_clk = {
.name = "aestdessha_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioDE_clk,
&trng_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&mmc0_clk,
&twi0_clk,
&twi1_clk,
&spi0_clk,
&spi1_clk,
&ssc0_clk,
&ssc1_clk,
&tcb0_clk,
&pwm_clk,
&tsc_clk,
&dma_clk,
&uhphs_clk,
&lcdc_clk,
&ac97_clk,
&macb_clk,
&isi_clk,
&udphs_clk,
&mmc1_clk,
&adc_op_clk,
&aestdessha_clk,
// irq0
};
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for macb_hclk */
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "rtc-at91sam9.0", &clk32k),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
/* more tc lookup table for DT entries */
CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffd20.rtc", &clk32k),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioDE_clk),
CLKDEV_CON_ID("pioE", &pioDE_clk),
/* Fake adc clock */
CLKDEV_CON_ID("adc_clk", &tsc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static void __init at91sam9g45_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
clk_register(&vdec_clk);
clk_register(&pck0);
clk_register(&pck1);
}
#else
#define at91sam9g45_register_clocks NULL
#endif
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
{
.id = AT91SAM9G45_ID_PIOA,
.regbase = AT91SAM9G45_BASE_PIOA,
}, {
.id = AT91SAM9G45_ID_PIOB,
.regbase = AT91SAM9G45_BASE_PIOB,
}, {
.id = AT91SAM9G45_ID_PIOC,
.regbase = AT91SAM9G45_BASE_PIOC,
}, {
.id = AT91SAM9G45_ID_PIODE,
.regbase = AT91SAM9G45_BASE_PIOD,
}, {
.id = AT91SAM9G45_ID_PIODE,
.regbase = AT91SAM9G45_BASE_PIOE,
}
};
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
......@@ -372,113 +26,14 @@ static void __init at91sam9g45_map_io(void)
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
}
static void __init at91sam9g45_ioremap_registers(void)
{
at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
at91_pm_set_standby(at91_ddr_standby);
}
static void __init at91sam9g45_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9g45_gpio, 5);
}
static struct resource rstc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_RSTC,
.end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_BASE_DDRSDRC1,
.end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AT91SAM9G45_BASE_DDRSDRC0,
.end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rstc_device = {
.name = "at91-sam9g45-reset",
.resource = rstc_resources,
.num_resources = ARRAY_SIZE(rstc_resources),
};
static struct resource shdwc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SHDWC,
.end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device shdwc_device = {
.name = "at91-poweroff",
.resource = shdwc_resources,
.num_resources = ARRAY_SIZE(shdwc_resources),
};
static void __init at91sam9g45_register_devices(void)
{
platform_device_register(&rstc_device);
platform_device_register(&shdwc_device);
}
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
1, /* Parallel IO Controller A */
1, /* Parallel IO Controller B */
1, /* Parallel IO Controller C */
1, /* Parallel IO Controller D and E */
0,
5, /* USART 0 */
5, /* USART 1 */
5, /* USART 2 */
5, /* USART 3 */
0, /* Multimedia Card Interface 0 */
6, /* Two-Wire Interface 0 */
6, /* Two-Wire Interface 1 */
5, /* Serial Peripheral Interface 0 */
5, /* Serial Peripheral Interface 1 */
4, /* Serial Synchronous Controller 0 */
4, /* Serial Synchronous Controller 1 */
0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
0, /* Pulse Width Modulation Controller */
0, /* Touch Screen Controller */
0, /* DMA Controller */
2, /* USB Host High Speed port */
3, /* LDC Controller */
5, /* AC97 Controller */
3, /* Ethernet */
0, /* Image Sensor Interface */
2, /* USB Device High speed port */
0, /* AESTDESSHA Crypto HW Accelerators */
0, /* Multimedia Card Interface 1 */
0,
0, /* Advanced Interrupt Controller (IRQ0) */
};
static void __init at91sam9g45_init_time(void)
{
at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
......@@ -486,11 +41,6 @@ static void __init at91sam9g45_init_time(void)
AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
.ioremap_registers = at91sam9g45_ioremap_registers,
.register_clocks = at91sam9g45_register_clocks,
.register_devices = at91sam9g45_register_devices,
.init = at91sam9g45_initialize,
.init_time = at91sam9g45_init_time,
AT91_SOC_END
arch/arm/mach-at91/at91sam9g45_devices.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* On-Chip devices setup code for the AT91SAM9G45 family
*
* Copyright (C) 2009 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
#include <linux/platform_data/crypto-atmel.h>
#include <linux/platform_data/at91_adc.h>
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
#include <mach/hardware.h>
#include <media/atmel-isi.h>
#include "board.h"
#include "generic.h"
#include "clock.h"
#include "gpio.h"
/* --------------------------------------------------------------------
* HDMAC - AHB DMA Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
.end = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at_hdmac_device = {
.name = "at91sam9g45_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
};
void __init at91_add_device_hdmac(void)
{
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
#endif
/* --------------------------------------------------------------------
* USB Host (OHCI)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_ohci_data;
static struct resource usbh_ohci_resources[] = {
[0] = {
.start = AT91SAM9G45_OHCI_BASE,
.end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_usbh_ohci_device = {
.name = "at91_ohci",
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_ohci_data,
},
.resource = usbh_ohci_resources,
.num_resources = ARRAY_SIZE(usbh_ohci_resources),
};
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
{
int i;
if (!data)
return;
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i],
data->vbus_pin_active_low[i]);
}
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
usbh_ohci_data = *data;
platform_device_register(&at91_usbh_ohci_device);
}
#else
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
#endif
/* --------------------------------------------------------------------
* USB Host HS (EHCI)
* Needs an OHCI host for low and full speed management
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
static u64 ehci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_ehci_data;
static struct resource usbh_ehci_resources[] = {
[0] = {
.start = AT91SAM9G45_EHCI_BASE,
.end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_usbh_ehci_device = {
.name = "atmel-ehci",
.id = -1,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_ehci_data,
},
.resource = usbh_ehci_resources,
.num_resources = ARRAY_SIZE(usbh_ehci_resources),
};
void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
{
int i;
if (!data)
return;
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i],
data->vbus_pin_active_low[i]);
}
usbh_ehci_data = *data;
platform_device_register(&at91_usbh_ehci_device);
}
#else
void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
#endif
/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9G45_UDPHS_FIFO,
.end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_BASE_UDPHS,
.end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
.flags = IORESOURCE_IRQ,
},
};
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
[idx] = { \
.name = nam, \
.index = idx, \
.fifo_size = maxpkt, \
.nr_banks = maxbk, \
.can_dma = dma, \
.can_isoc = isoc, \
}
static struct usba_ep_data usba_udc_ep[] __initdata = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 1024, 2, 1, 1),
EP("ep2", 2, 1024, 2, 1, 1),
EP("ep3", 3, 1024, 3, 1, 0),
EP("ep4", 4, 1024, 3, 1, 0),
EP("ep5", 5, 1024, 3, 1, 1),
EP("ep6", 6, 1024, 3, 1, 1),
};
#undef EP
/*
* pdata doesn't have room for any endpoints, so we need to
* append room for the ones we need right after it.
*/
static struct {
struct usba_platform_data pdata;
struct usba_ep_data ep[7];
} usba_udc_data;
static struct platform_device at91_usba_udc_device = {
.name = "atmel_usba_udc",
.id = -1,
.dev = {
.platform_data = &usba_udc_data.pdata,
},
.resource = usba_udc_resources,
.num_resources = ARRAY_SIZE(usba_udc_resources),
};
void __init at91_add_device_usba(struct usba_platform_data *data)
{
usba_udc_data.pdata.vbus_pin = -EINVAL;
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
}
/* Pullup pin is handled internally by USB device peripheral */
platform_device_register(&at91_usba_udc_device);
}
#else
void __init at91_add_device_usba(struct usba_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_EMAC,
.end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_eth_device = {
.name = "macb",
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
/* Pins used for MII and RMII */
at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
if (!data->is_rmii) {
at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
}
eth_data = *data;
platform_device_register(&at91sam9g45_eth_device);
}
#else
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_MCI0,
.end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_mmc0_device = {
.name = "atmel_mci",
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc0_data,
},
.resource = mmc0_resources,
.num_resources = ARRAY_SIZE(mmc0_resources),
};
static struct resource mmc1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_MCI1,
.end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_mmc1_device = {
.name = "atmel_mci",
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc1_data,
},
.resource = mmc1_resources,
.num_resources = ARRAY_SIZE(mmc1_resources),
};
/* Consider only one slot : slot 0 */
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
/* Must have at least one usable slot */
if (!data->slot[0].bus_width)
return;
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
{
struct at_dma_slave *atslave;
struct mci_dma_data *alt_atslave;
alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
atslave = &alt_atslave->sdata;
/* DMA slave channel configuration */
atslave->dma_dev = &at_hdmac_device.dev;
atslave->cfg = ATC_FIFOCFG_HALFFIFO
| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
if (mmc_id == 0) /* MCI0 */
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
| ATC_DST_PER(AT_DMA_ID_MCI0);
else /* MCI1 */
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
| ATC_DST_PER(AT_DMA_ID_MCI1);
data->dma_slave = alt_atslave;
}
#endif
/* input/irq */
if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
if (mmc_id == 0) { /* MCI0 */
/* CLK */
at91_set_A_periph(AT91_PIN_PA0, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
at91_set_A_periph(AT91_PIN_PA2, 1);
if (data->slot[0].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
if (data->slot[0].bus_width == 8) {
at91_set_A_periph(AT91_PIN_PA6, 1);
at91_set_A_periph(AT91_PIN_PA7, 1);
at91_set_A_periph(AT91_PIN_PA8, 1);
at91_set_A_periph(AT91_PIN_PA9, 1);
}
}
mmc0_data = *data;
platform_device_register(&at91sam9g45_mmc0_device);
} else { /* MCI1 */
/* CLK */
at91_set_A_periph(AT91_PIN_PA31, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA22, 1);
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
at91_set_A_periph(AT91_PIN_PA23, 1);
if (data->slot[0].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA24, 1);
at91_set_A_periph(AT91_PIN_PA25, 1);
at91_set_A_periph(AT91_PIN_PA26, 1);
if (data->slot[0].bus_width == 8) {
at91_set_A_periph(AT91_PIN_PA27, 1);
at91_set_A_periph(AT91_PIN_PA28, 1);
at91_set_A_periph(AT91_PIN_PA29, 1);
at91_set_A_periph(AT91_PIN_PA30, 1);
}
}
mmc1_data = *data;
platform_device_register(&at91sam9g45_mmc1_device);
}
}
#else
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
* -------------------------------------------------------------------- */
#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
static struct atmel_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
[0] = {
.start = NAND_BASE,
.end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_BASE_ECC,
.end = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9g45_nand_device = {
.name = "atmel_nand",
.id = -1,
.dev = {
.platform_data = &nand_data,
},
.resource = nand_resources,
.num_resources = ARRAY_SIZE(nand_resources),
};
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
if (!data)
return;
csa = at91_matrix_read(AT91_MATRIX_EBICSA);
at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
platform_device_register(&at91sam9g45_nand_device);
}
#else
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
/*
* Prefer the GPIO code since the TWI controller isn't robust
* (gets overruns and underruns under load) and can only issue
* repeated STARTs in one scenario (the driver doesn't yet handle them).
*/
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
static struct i2c_gpio_platform_data pdata_i2c0 = {
.sda_pin = AT91_PIN_PA20,
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA21,
.scl_is_open_drain = 1,
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi0_device = {
.name = "i2c-gpio",
.id = 0,
.dev.platform_data = &pdata_i2c0,
};
static struct i2c_gpio_platform_data pdata_i2c1 = {
.sda_pin = AT91_PIN_PB10,
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PB11,
.scl_is_open_drain = 1,
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi1_device = {
.name = "i2c-gpio",
.id = 1,
.dev.platform_data = &pdata_i2c1,
};
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
i2c_register_board_info(i2c_id, devices, nr_devices);
if (i2c_id == 0) {
at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
at91_set_multi_drive(AT91_PIN_PA20, 1);
at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
at91_set_multi_drive(AT91_PIN_PA21, 1);
platform_device_register(&at91sam9g45_twi0_device);
} else {
at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
at91_set_multi_drive(AT91_PIN_PB10, 1);
at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
at91_set_multi_drive(AT91_PIN_PB11, 1);
platform_device_register(&at91sam9g45_twi1_device);
}
}
#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TWI0,
.end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_twi0_device = {
.name = "i2c-at91sam9g10",
.id = 0,
.resource = twi0_resources,
.num_resources = ARRAY_SIZE(twi0_resources),
};
static struct resource twi1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TWI1,
.end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_twi1_device = {
.name = "i2c-at91sam9g10",
.id = 1,
.resource = twi1_resources,
.num_resources = ARRAY_SIZE(twi1_resources),
};
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
i2c_register_board_info(i2c_id, devices, nr_devices);
/* pins used for TWI interface */
if (i2c_id == 0) {
at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
platform_device_register(&at91sam9g45_twi0_device);
} else {
at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
platform_device_register(&at91sam9g45_twi1_device);
}
}
#else
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SPI0,
.end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_spi0_device = {
.name = "atmel_spi",
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
};
static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
static struct resource spi1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SPI1,
.end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_spi1_device = {
.name = "atmel_spi",
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
};
static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
{
int i;
unsigned long cs_pin;
short enable_spi0 = 0;
short enable_spi1 = 0;
/* Choose SPI chip-selects */
for (i = 0; i < nr_devices; i++) {
if (devices[i].controller_data)
cs_pin = (unsigned long) devices[i].controller_data;
else if (devices[i].bus_num == 0)
cs_pin = spi0_standard_cs[devices[i].chip_select];
else
cs_pin = spi1_standard_cs[devices[i].chip_select];
if (!gpio_is_valid(cs_pin))
continue;
if (devices[i].bus_num == 0)
enable_spi0 = 1;
else
enable_spi1 = 1;
/* enable chip-select pin */
at91_set_gpio_output(cs_pin, 1);
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
}
spi_register_board_info(devices, nr_devices);
/* Configure SPI bus(es) */
if (enable_spi0) {
at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
platform_device_register(&at91sam9g45_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
platform_device_register(&at91sam9g45_spi1_device);
}
}
#else
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* AC97
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_AC97C,
.end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ac97_device = {
.name = "atmel_ac97c",
.id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
.num_resources = ARRAY_SIZE(ac97_resources),
};
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
/* reset */
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
platform_device_register(&at91sam9g45_ac97_device);
}
#else
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* Image Sensor Interface
* -------------------------------------------------------------------- */
#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
static u64 isi_dmamask = DMA_BIT_MASK(32);
static struct isi_platform_data isi_data;
struct resource isi_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_ISI,
.end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_isi_device = {
.name = "atmel_isi",
.id = 0,
.dev = {
.dma_mask = &isi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &isi_data,
},
.resource = isi_resources,
.num_resources = ARRAY_SIZE(isi_resources),
};
static struct clk_lookup isi_mck_lookups[] = {
CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
};
void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck)
{
struct clk *pck;
struct clk *parent;
if (!data)
return;
isi_data = *data;
at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
platform_device_register(&at91sam9g45_isi_device);
if (use_pck_as_mck) {
at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
pck = clk_get(NULL, "pck1");
parent = clk_get(NULL, "plla");
BUG_ON(IS_ERR(pck) || IS_ERR(parent));
if (clk_set_parent(pck, parent)) {
pr_err("Failed to set PCK's parent\n");
} else {
/* Register PCK as ISI_MCK */
isi_mck_lookups[0].clk = pck;
clkdev_add_table(isi_mck_lookups,
ARRAY_SIZE(isi_mck_lookups));
}
clk_put(pck);
clk_put(parent);
}
}
#else
void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck) {}
#endif
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_pdata lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
.start = AT91SAM9G45_LCDC_BASE,
.end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
{
if (!data)
return;
if (cpu_is_at91sam9g45es())
at91_lcdc_device.name = "at91sam9g45es-lcdfb";
else
at91_lcdc_device.name = "at91sam9g45-lcdfb";
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
#endif
/* --------------------------------------------------------------------
* Timer/Counter block
* -------------------------------------------------------------------- */
#ifdef CONFIG_ATMEL_TCLIB
static struct resource tcb0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TCB0,
.end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_tcb0_device = {
.name = "atmel_tcb",
.id = 0,
.resource = tcb0_resources,
.num_resources = ARRAY_SIZE(tcb0_resources),
};
/* TCB1 begins with TC3 */
static struct resource tcb1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TCB1,
.end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_tcb1_device = {
.name = "atmel_tcb",
.id = 1,
.resource = tcb1_resources,
.num_resources = ARRAY_SIZE(tcb1_resources),
};
static void __init at91_add_device_tc(void)
{
platform_device_register(&at91sam9g45_tcb0_device);
platform_device_register(&at91sam9g45_tcb1_device);
}
#else
static void __init at91_add_device_tc(void) { }
#endif
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct resource rtc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_RTC,
.end = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91_ID_SYS,
.end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_rtc_device = {
.name = "at91_rtc",
.id = -1,
.resource = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
};
static void __init at91_add_device_rtc(void)
{
platform_device_register(&at91sam9g45_rtc_device);
}
#else
static void __init at91_add_device_rtc(void) {}
#endif
/* --------------------------------------------------------------------
* ADC and touchscreen
* -------------------------------------------------------------------- */
#if IS_ENABLED(CONFIG_AT91_ADC)
static struct at91_adc_data adc_data;
static struct resource adc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TSC,
.end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device at91_adc_device = {
.name = "at91sam9g45-adc",
.id = -1,
.dev = {
.platform_data = &adc_data,
},
.resource = adc_resources,
.num_resources = ARRAY_SIZE(adc_resources),
};
static struct at91_adc_trigger at91_adc_triggers[] = {
[0] = {
.name = "external-rising",
.value = 1,
.is_external = true,
},
[1] = {
.name = "external-falling",
.value = 2,
.is_external = true,
},
[2] = {
.name = "external-any",
.value = 3,
.is_external = true,
},
[3] = {
.name = "continuous",
.value = 6,
.is_external = false,
},
};
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
return;
if (test_bit(0, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD20, 0);
if (test_bit(1, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD21, 0);
if (test_bit(2, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD22, 0);
if (test_bit(3, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD23, 0);
if (test_bit(4, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD24, 0);
if (test_bit(5, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD25, 0);
if (test_bit(6, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD26, 0);
if (test_bit(7, &data->channels_used))
at91_set_gpio_input(AT91_PIN_PD27, 0);
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PD28, 0);
data->startup_time = 40;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
adc_data = *data;
platform_device_register(&at91_adc_device);
}
#else
void __init at91_add_device_adc(struct at91_adc_data *data) {}
#endif
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
static struct resource rtt_resources[] = {
{
.start = AT91SAM9G45_BASE_RTT,
.end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device at91sam9g45_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
};
#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
static void __init at91_add_device_rtt_rtc(void)
{
at91sam9g45_rtt_device.name = "rtc-at91sam9";
/*
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9g45_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
{
/* Only one resource is needed: RTT not used as RTC */
at91sam9g45_rtt_device.num_resources = 1;
}
#endif
static void __init at91_add_device_rtt(void)
{
at91_add_device_rtt_rtc();
platform_device_register(&at91sam9g45_rtt_device);
}
/* --------------------------------------------------------------------
* TRNG
* -------------------------------------------------------------------- */
#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
static struct resource trng_resources[] = {
{
.start = AT91SAM9G45_BASE_TRNG,
.end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device at91sam9g45_trng_device = {
.name = "atmel-trng",
.id = -1,
.resource = trng_resources,
.num_resources = ARRAY_SIZE(trng_resources),
};
static void __init at91_add_device_trng(void)
{
platform_device_register(&at91sam9g45_trng_device);
}
#else
static void __init at91_add_device_trng(void) {}
#endif
/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9G45_BASE_WDT,
.end = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
{
platform_device_register(&at91sam9g45_wdt_device);
}
#else
static void __init at91_add_device_watchdog(void) {}
#endif
/* --------------------------------------------------------------------
* PWM
* --------------------------------------------------------------------*/
#if IS_ENABLED(CONFIG_PWM_ATMEL)
static struct resource pwm_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_PWMC,
.end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_pwm0_device = {
.name = "at91sam9rl-pwm",
.id = -1,
.resource = pwm_resources,
.num_resources = ARRAY_SIZE(pwm_resources),
};
void __init at91_add_device_pwm(u32 mask)
{
if (mask & (1 << AT91_PWM0))
at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
if (mask & (1 << AT91_PWM1))
at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
if (mask & (1 << AT91_PWM2))
at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
if (mask & (1 << AT91_PWM3))
at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
platform_device_register(&at91sam9g45_pwm0_device);
}
#else
void __init at91_add_device_pwm(u32 mask) {}
#endif
/* --------------------------------------------------------------------
* SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
static u64 ssc0_dmamask = DMA_BIT_MASK(32);
static struct resource ssc0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SSC0,
.end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ssc0_device = {
.name = "at91sam9g45_ssc",
.id = 0,
.dev = {
.dma_mask = &ssc0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ssc0_resources,
.num_resources = ARRAY_SIZE(ssc0_resources),
};
static inline void configure_ssc0_pins(unsigned pins)
{
if (pins & ATMEL_SSC_TF)
at91_set_A_periph(AT91_PIN_PD1, 1);
if (pins & ATMEL_SSC_TK)
at91_set_A_periph(AT91_PIN_PD0, 1);
if (pins & ATMEL_SSC_TD)
at91_set_A_periph(AT91_PIN_PD2, 1);
if (pins & ATMEL_SSC_RD)
at91_set_A_periph(AT91_PIN_PD3, 1);
if (pins & ATMEL_SSC_RK)
at91_set_A_periph(AT91_PIN_PD4, 1);
if (pins & ATMEL_SSC_RF)
at91_set_A_periph(AT91_PIN_PD5, 1);
}
static u64 ssc1_dmamask = DMA_BIT_MASK(32);
static struct resource ssc1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SSC1,
.end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ssc1_device = {
.name = "at91sam9g45_ssc",
.id = 1,
.dev = {
.dma_mask = &ssc1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ssc1_resources,
.num_resources = ARRAY_SIZE(ssc1_resources),
};
static inline void configure_ssc1_pins(unsigned pins)
{
if (pins & ATMEL_SSC_TF)
at91_set_A_periph(AT91_PIN_PD14, 1);
if (pins & ATMEL_SSC_TK)
at91_set_A_periph(AT91_PIN_PD12, 1);
if (pins & ATMEL_SSC_TD)
at91_set_A_periph(AT91_PIN_PD10, 1);
if (pins & ATMEL_SSC_RD)
at91_set_A_periph(AT91_PIN_PD11, 1);
if (pins & ATMEL_SSC_RK)
at91_set_A_periph(AT91_PIN_PD13, 1);
if (pins & ATMEL_SSC_RF)
at91_set_A_periph(AT91_PIN_PD15, 1);
}
/*
* SSC controllers are accessed through library code, instead of any
* kind of all-singing/all-dancing driver. For example one could be
* used by a particular I2S audio codec's driver, while another one
* on the same system might be used by a custom data capture driver.
*/
void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
struct platform_device *pdev;
/*
* NOTE: caller is responsible for passing information matching
* "pins" to whatever will be using each particular controller.
*/
switch (id) {
case AT91SAM9G45_ID_SSC0:
pdev = &at91sam9g45_ssc0_device;
configure_ssc0_pins(pins);
break;
case AT91SAM9G45_ID_SSC1:
pdev = &at91sam9g45_ssc1_device;
configure_ssc1_pins(pins);
break;
default:
return;
}
platform_device_register(pdev);
}
#else
void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DBGU,
.end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91_ID_SYS,
.end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
.dma_mask = &dbgu_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
};
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
}
static struct resource uart0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US0,
.end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
.dma_mask = &uart0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US1,
.end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
.dma_mask = &uart1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US2,
.end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
.dma_mask = &uart2_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US3,
.end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
.dma_mask = &uart3_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9g45_dbgu_device;
configure_dbgu_pins();
break;
case AT91SAM9G45_ID_US0:
pdev = &at91sam9g45_uart0_device;
configure_usart0_pins(pins);
break;
case AT91SAM9G45_ID_US1:
pdev = &at91sam9g45_uart1_device;
configure_usart1_pins(pins);
break;
case AT91SAM9G45_ID_US2:
pdev = &at91sam9g45_uart2_device;
configure_usart2_pins(pins);
break;
case AT91SAM9G45_ID_US3:
pdev = &at91sam9g45_uart3_device;
configure_usart3_pins(pins);
break;
default:
return;
}
pdata = pdev->dev.platform_data;
pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
}
void __init at91_add_device_serial(void)
{
int i;
for (i = 0; i < ATMEL_MAX_UART; i++) {
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_add_device_serial(void) {}
#endif
/* --------------------------------------------------------------------
* SHA1/SHA256
* -------------------------------------------------------------------- */
#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
static struct resource sha_resources[] = {
{
.start = AT91SAM9G45_BASE_SHA,
.end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_sha_device = {
.name = "atmel_sha",
.id = -1,
.resource = sha_resources,
.num_resources = ARRAY_SIZE(sha_resources),
};
static void __init at91_add_device_sha(void)
{
platform_device_register(&at91sam9g45_sha_device);
}
#else
static void __init at91_add_device_sha(void) {}
#endif
/* --------------------------------------------------------------------
* DES/TDES
* -------------------------------------------------------------------- */
#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
static struct resource tdes_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TDES,
.end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_tdes_device = {
.name = "atmel_tdes",
.id = -1,
.resource = tdes_resources,
.num_resources = ARRAY_SIZE(tdes_resources),
};
static void __init at91_add_device_tdes(void)
{
platform_device_register(&at91sam9g45_tdes_device);
}
#else
static void __init at91_add_device_tdes(void) {}
#endif
/* --------------------------------------------------------------------
* AES
* -------------------------------------------------------------------- */
#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
static struct crypto_platform_data aes_data;
static struct crypto_dma_data alt_atslave;
static u64 aes_dmamask = DMA_BIT_MASK(32);
static struct resource aes_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_AES,
.end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_aes_device = {
.name = "atmel_aes",
.id = -1,
.dev = {
.dma_mask = &aes_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &aes_data,
},
.resource = aes_resources,
.num_resources = ARRAY_SIZE(aes_resources),
};
static void __init at91_add_device_aes(void)
{
struct at_dma_slave *atslave;
/* DMA TX slave channel configuration */
atslave = &alt_atslave.txdata;
atslave->dma_dev = &at_hdmac_device.dev;
atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
ATC_SRC_PER(AT_DMA_ID_AES_RX);
/* DMA RX slave channel configuration */
atslave = &alt_atslave.rxdata;
atslave->dma_dev = &at_hdmac_device.dev;
atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
ATC_DST_PER(AT_DMA_ID_AES_TX);
aes_data.dma_slave = &alt_atslave;
platform_device_register(&at91sam9g45_aes_device);
}
#else
static void __init at91_add_device_aes(void) {}
#endif
/* -------------------------------------------------------------------- */
/*
* These devices are always present and don't need any board-specific
* setup.
*/
static int __init at91_add_standard_devices(void)
{
if (of_have_populated_dt())
return 0;
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
at91_add_device_sha();
at91_add_device_tdes();
at91_add_device_aes();
return 0;
}
arch_initcall(at91_add_standard_devices);
arch/arm/mach-at91/at91sam9rl.c
View file @ 4b3d4d3d
......@@ -9,286 +9,13 @@
* more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "sam9_smc.h"
#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
#if defined(CONFIG_OLD_CLK_AT91)
#include "clock.h"
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US3,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc_clk = {
.name = "mci_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_MCI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi_clk = {
.name = "spi_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_SPI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc0_clk = {
.name = "tc0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc1_clk = {
.name = "tc1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc2_clk = {
.name = "tc2_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TC2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pwm_clk = {
.name = "pwm_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tsc_clk = {
.name = "tsc_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TSC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma_clk = {
.name = "dma_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_DMA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ac97_clk = {
.name = "ac97_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 1000000,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioD_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&mmc_clk,
&twi0_clk,
&twi1_clk,
&spi_clk,
&ssc0_clk,
&ssc1_clk,
&tc0_clk,
&tc1_clk,
&tc2_clk,
&pwm_clk,
&tsc_clk,
&dma_clk,
&udphs_clk,
&lcdc_clk,
&ac97_clk,
&adc_op_clk,
// irq0
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
CLKDEV_CON_DEV_ID(NULL, "rtc-at91sam9.0", &clk32k),
/* more lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffd20.rtc", &clk32k),
CLKDEV_CON_ID("adc_clk", &tsc_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static void __init at91sam9rl_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
}
#endif
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
{
.id = AT91SAM9RL_ID_PIOA,
.regbase = AT91SAM9RL_BASE_PIOA,
}, {
.id = AT91SAM9RL_ID_PIOB,
.regbase = AT91SAM9RL_BASE_PIOB,
}, {
.id = AT91SAM9RL_ID_PIOC,
.regbase = AT91SAM9RL_BASE_PIOC,
}, {
.id = AT91SAM9RL_ID_PIOD,
.regbase = AT91SAM9RL_BASE_PIOD,
}
};
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
......@@ -311,107 +38,14 @@ static void __init at91sam9rl_map_io(void)
at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
}
static void __init at91sam9rl_ioremap_registers(void)
{
at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
at91_pm_set_standby(at91sam9_sdram_standby);
}
static void __init at91sam9rl_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
}
static struct resource rstc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_RSTC,
.end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9RL_BASE_SDRAMC,
.end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rstc_device = {
.name = "at91-sam9260-reset",
.resource = rstc_resources,
.num_resources = ARRAY_SIZE(rstc_resources),
};
static struct resource shdwc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_SHDWC,
.end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device shdwc_device = {
.name = "at91-poweroff",
.resource = shdwc_resources,
.num_resources = ARRAY_SIZE(shdwc_resources),
};
static void __init at91sam9rl_register_devices(void)
{
platform_device_register(&rstc_device);
platform_device_register(&shdwc_device);
}
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
1, /* Parallel IO Controller A */
1, /* Parallel IO Controller B */
1, /* Parallel IO Controller C */
1, /* Parallel IO Controller D */
5, /* USART 0 */
5, /* USART 1 */
5, /* USART 2 */
5, /* USART 3 */
0, /* Multimedia Card Interface */
6, /* Two-Wire Interface 0 */
6, /* Two-Wire Interface 1 */
5, /* Serial Peripheral Interface */
4, /* Serial Synchronous Controller 0 */
4, /* Serial Synchronous Controller 1 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0,
0, /* Touch Screen Controller */
0, /* DMA Controller */
2, /* USB Device High speed port */
2, /* LCD Controller */
6, /* AC97 Controller */
0,
0,
0,
0,
0,
0,
0, /* Advanced Interrupt Controller */
};
static void __init at91sam9rl_init_time(void)
{
at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
......@@ -419,13 +53,6 @@ static void __init at91sam9rl_init_time(void)
AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
.ioremap_registers = at91sam9rl_ioremap_registers,
#if defined(CONFIG_OLD_CLK_AT91)
.register_clocks = at91sam9rl_register_clocks,
#endif
.register_devices = at91sam9rl_register_devices,
.init = at91sam9rl_initialize,
.init_time = at91sam9rl_init_time,
AT91_SOC_END
arch/arm/mach-at91/at91sam9rl_devices.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* Copyright (C) 2007 Atmel Corporation
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
#include <linux/platform_data/at91_adc.h>
#include "board.h"
#include "generic.h"
#include "gpio.h"
/* --------------------------------------------------------------------
* HDMAC - AHB DMA Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DMA,
.end = AT91SAM9RL_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at_hdmac_device = {
.name = "at91sam9rl_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
};
void __init at91_add_device_hdmac(void)
{
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
#endif
/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9RL_UDPHS_FIFO,
.end = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9RL_BASE_UDPHS,
.end = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
.flags = IORESOURCE_IRQ,
},
};
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
[idx] = { \
.name = nam, \
.index = idx, \
.fifo_size = maxpkt, \
.nr_banks = maxbk, \
.can_dma = dma, \
.can_isoc = isoc, \
}
static struct usba_ep_data usba_udc_ep[] __initdata = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 1024, 2, 1, 1),
EP("ep2", 2, 1024, 2, 1, 1),
EP("ep3", 3, 1024, 3, 1, 0),
EP("ep4", 4, 1024, 3, 1, 0),
EP("ep5", 5, 1024, 3, 1, 1),
EP("ep6", 6, 1024, 3, 1, 1),
};
#undef EP
/*
* pdata doesn't have room for any endpoints, so we need to
* append room for the ones we need right after it.
*/
static struct {
struct usba_platform_data pdata;
struct usba_ep_data ep[7];
} usba_udc_data;
static struct platform_device at91_usba_udc_device = {
.name = "atmel_usba_udc",
.id = -1,
.dev = {
.platform_data = &usba_udc_data.pdata,
},
.resource = usba_udc_resources,
.num_resources = ARRAY_SIZE(usba_udc_resources),
};
void __init at91_add_device_usba(struct usba_platform_data *data)
{
/*
* Invalid pins are 0 on AT91, but the usba driver is shared
* with AVR32, which use negative values instead. Once/if
* gpio_is_valid() is ported to AT91, revisit this code.
*/
usba_udc_data.pdata.vbus_pin = -EINVAL;
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
}
/* Pullup pin is handled internally by USB device peripheral */
platform_device_register(&at91_usba_udc_device);
}
#else
void __init at91_add_device_usba(struct usba_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_MCI,
.end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_mmc_device = {
.name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
.num_resources = ARRAY_SIZE(mmc_resources),
};
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
if (data->slot[0].bus_width) {
/* input/irq */
if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
/* CLK */
at91_set_A_periph(AT91_PIN_PA2, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA0, 1);
if (data->slot[0].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
}
mmc_data = *data;
platform_device_register(&at91sam9rl_mmc_device);
}
}
#else
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
* -------------------------------------------------------------------- */
#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
static struct atmel_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
[0] = {
.start = NAND_BASE,
.end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9RL_BASE_ECC,
.end = AT91SAM9RL_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device atmel_nand_device = {
.name = "atmel_nand",
.id = -1,
.dev = {
.platform_data = &nand_data,
},
.resource = nand_resources,
.num_resources = ARRAY_SIZE(nand_resources),
};
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
if (!data)
return;
csa = at91_matrix_read(AT91_MATRIX_EBICSA);
at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
nand_data = *data;
platform_device_register(&atmel_nand_device);
}
#else
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
/*
* Prefer the GPIO code since the TWI controller isn't robust
* (gets overruns and underruns under load) and can only issue
* repeated STARTs in one scenario (the driver doesn't yet handle them).
*/
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
static struct i2c_gpio_platform_data pdata = {
.sda_pin = AT91_PIN_PA23,
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA24,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
};
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-gpio",
.id = 0,
.dev.platform_data = &pdata,
};
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
at91_set_multi_drive(AT91_PIN_PA23, 1);
at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
at91_set_multi_drive(AT91_PIN_PA24, 1);
i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9rl_twi_device);
}
#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_TWI0,
.end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-at91sam9g20",
.id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
at91_set_multi_drive(AT91_PIN_PA23, 1);
at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA24, 1);
i2c_register_board_info(0, devices, nr_devices);
platform_device_register(&at91sam9rl_twi_device);
}
#else
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_SPI,
.end = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_spi_device = {
.name = "atmel_spi",
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
};
static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
{
int i;
unsigned long cs_pin;
at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */
at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */
at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */
/* Enable SPI chip-selects */
for (i = 0; i < nr_devices; i++) {
if (devices[i].controller_data)
cs_pin = (unsigned long) devices[i].controller_data;
else
cs_pin = spi_standard_cs[devices[i].chip_select];
if (!gpio_is_valid(cs_pin))
continue;
/* enable chip-select pin */
at91_set_gpio_output(cs_pin, 1);
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
}
spi_register_board_info(devices, nr_devices);
platform_device_register(&at91sam9rl_spi_device);
}
#else
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* AC97
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_AC97C,
.end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_ac97_device = {
.name = "atmel_ac97c",
.id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
.num_resources = ARRAY_SIZE(ac97_resources),
};
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */
at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */
at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */
at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
/* reset */
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
platform_device_register(&at91sam9rl_ac97_device);
}
#else
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_pdata lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
.start = AT91SAM9RL_LCDC_BASE,
.end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_lcdc_device = {
.name = "at91sam9rl-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
{
if (!data) {
return;
}
at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
#endif
/* --------------------------------------------------------------------
* Timer/Counter block
* -------------------------------------------------------------------- */
#ifdef CONFIG_ATMEL_TCLIB
static struct resource tcb_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_TCB0,
.end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_tcb_device = {
.name = "atmel_tcb",
.id = 0,
.resource = tcb_resources,
.num_resources = ARRAY_SIZE(tcb_resources),
};
static void __init at91_add_device_tc(void)
{
platform_device_register(&at91sam9rl_tcb_device);
}
#else
static void __init at91_add_device_tc(void) { }
#endif
/* --------------------------------------------------------------------
* ADC and Touchscreen
* -------------------------------------------------------------------- */
#if IS_ENABLED(CONFIG_AT91_ADC)
static struct at91_adc_data adc_data;
static struct resource adc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_TSC,
.end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device at91_adc_device = {
.name = "at91sam9rl-adc",
.id = -1,
.dev = {
.platform_data = &adc_data,
},
.resource = adc_resources,
.num_resources = ARRAY_SIZE(adc_resources),
};
static struct at91_adc_trigger at91_adc_triggers[] = {
[0] = {
.name = "external-rising",
.value = 1,
.is_external = true,
},
[1] = {
.name = "external-falling",
.value = 2,
.is_external = true,
},
[2] = {
.name = "external-any",
.value = 3,
.is_external = true,
},
[3] = {
.name = "continuous",
.value = 6,
.is_external = false,
},
};
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
return;
if (test_bit(0, &data->channels_used))
at91_set_A_periph(AT91_PIN_PA17, 0);
if (test_bit(1, &data->channels_used))
at91_set_A_periph(AT91_PIN_PA18, 0);
if (test_bit(2, &data->channels_used))
at91_set_A_periph(AT91_PIN_PA19, 0);
if (test_bit(3, &data->channels_used))
at91_set_A_periph(AT91_PIN_PA20, 0);
if (test_bit(4, &data->channels_used))
at91_set_A_periph(AT91_PIN_PD6, 0);
if (test_bit(5, &data->channels_used))
at91_set_A_periph(AT91_PIN_PD7, 0);
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PB15, 0);
data->startup_time = 40;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
adc_data = *data;
platform_device_register(&at91_adc_device);
}
#else
void __init at91_add_device_adc(struct at91_adc_data *data) {}
#endif
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct platform_device at91sam9rl_rtc_device = {
.name = "at91_rtc",
.id = -1,
.num_resources = 0,
};
static void __init at91_add_device_rtc(void)
{
platform_device_register(&at91sam9rl_rtc_device);
}
#else
static void __init at91_add_device_rtc(void) {}
#endif
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
static struct resource rtt_resources[] = {
{
.start = AT91SAM9RL_BASE_RTT,
.end = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device at91sam9rl_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
};
#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
static void __init at91_add_device_rtt_rtc(void)
{
at91sam9rl_rtt_device.name = "rtc-at91sam9";
/*
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9rl_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
{
/* Only one resource is needed: RTT not used as RTC */
at91sam9rl_rtt_device.num_resources = 1;
}
#endif
static void __init at91_add_device_rtt(void)
{
at91_add_device_rtt_rtc();
platform_device_register(&at91sam9rl_rtt_device);
}
/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9RL_BASE_WDT,
.end = AT91SAM9RL_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9rl_wdt_device = {
.name = "at91_wdt",
.id = -1,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
{
platform_device_register(&at91sam9rl_wdt_device);
}
#else
static void __init at91_add_device_watchdog(void) {}
#endif
/* --------------------------------------------------------------------
* PWM
* --------------------------------------------------------------------*/
#if IS_ENABLED(CONFIG_PWM_ATMEL)
static struct resource pwm_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_PWMC,
.end = AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_pwm0_device = {
.name = "at91sam9rl-pwm",
.id = -1,
.resource = pwm_resources,
.num_resources = ARRAY_SIZE(pwm_resources),
};
void __init at91_add_device_pwm(u32 mask)
{
if (mask & (1 << AT91_PWM0))
at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM0 */
if (mask & (1 << AT91_PWM1))
at91_set_B_periph(AT91_PIN_PB9, 1); /* enable PWM1 */
if (mask & (1 << AT91_PWM2))
at91_set_B_periph(AT91_PIN_PD5, 1); /* enable PWM2 */
if (mask & (1 << AT91_PWM3))
at91_set_B_periph(AT91_PIN_PD8, 1); /* enable PWM3 */
platform_device_register(&at91sam9rl_pwm0_device);
}
#else
void __init at91_add_device_pwm(u32 mask) {}
#endif
/* --------------------------------------------------------------------
* SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
static u64 ssc0_dmamask = DMA_BIT_MASK(32);
static struct resource ssc0_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_SSC0,
.end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_ssc0_device = {
.name = "at91rm9200_ssc",
.id = 0,
.dev = {
.dma_mask = &ssc0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ssc0_resources,
.num_resources = ARRAY_SIZE(ssc0_resources),
};
static inline void configure_ssc0_pins(unsigned pins)
{
if (pins & ATMEL_SSC_TF)
at91_set_A_periph(AT91_PIN_PC0, 1);
if (pins & ATMEL_SSC_TK)
at91_set_A_periph(AT91_PIN_PC1, 1);
if (pins & ATMEL_SSC_TD)
at91_set_A_periph(AT91_PIN_PA15, 1);
if (pins & ATMEL_SSC_RD)
at91_set_A_periph(AT91_PIN_PA16, 1);
if (pins & ATMEL_SSC_RK)
at91_set_B_periph(AT91_PIN_PA10, 1);
if (pins & ATMEL_SSC_RF)
at91_set_B_periph(AT91_PIN_PA22, 1);
}
static u64 ssc1_dmamask = DMA_BIT_MASK(32);
static struct resource ssc1_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_SSC1,
.end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9rl_ssc1_device = {
.name = "at91rm9200_ssc",
.id = 1,
.dev = {
.dma_mask = &ssc1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ssc1_resources,
.num_resources = ARRAY_SIZE(ssc1_resources),
};
static inline void configure_ssc1_pins(unsigned pins)
{
if (pins & ATMEL_SSC_TF)
at91_set_B_periph(AT91_PIN_PA29, 1);
if (pins & ATMEL_SSC_TK)
at91_set_B_periph(AT91_PIN_PA30, 1);
if (pins & ATMEL_SSC_TD)
at91_set_B_periph(AT91_PIN_PA13, 1);
if (pins & ATMEL_SSC_RD)
at91_set_B_periph(AT91_PIN_PA14, 1);
if (pins & ATMEL_SSC_RK)
at91_set_B_periph(AT91_PIN_PA9, 1);
if (pins & ATMEL_SSC_RF)
at91_set_B_periph(AT91_PIN_PA8, 1);
}
/*
* SSC controllers are accessed through library code, instead of any
* kind of all-singing/all-dancing driver. For example one could be
* used by a particular I2S audio codec's driver, while another one
* on the same system might be used by a custom data capture driver.
*/
void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
struct platform_device *pdev;
/*
* NOTE: caller is responsible for passing information matching
* "pins" to whatever will be using each particular controller.
*/
switch (id) {
case AT91SAM9RL_ID_SSC0:
pdev = &at91sam9rl_ssc0_device;
configure_ssc0_pins(pins);
break;
case AT91SAM9RL_ID_SSC1:
pdev = &at91sam9rl_ssc1_device;
configure_ssc1_pins(pins);
break;
default:
return;
}
platform_device_register(pdev);
}
#else
void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DBGU,
.end = AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91_ID_SYS,
.end = NR_IRQS_LEGACY + AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9rl_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
.dma_mask = &dbgu_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
};
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
}
static struct resource uart0_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_US0,
.end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9rl_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
.dma_mask = &uart0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
if (pins & ATMEL_UART_DSR)
at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
if (pins & ATMEL_UART_DTR)
at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
if (pins & ATMEL_UART_DCD)
at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
if (pins & ATMEL_UART_RI)
at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_US1,
.end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9rl_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
.dma_mask = &uart1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_US2,
.end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9rl_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
.dma_mask = &uart2_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_US3,
.end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3,
.end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9rl_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
.dma_mask = &uart3_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9rl_dbgu_device;
configure_dbgu_pins();
break;
case AT91SAM9RL_ID_US0:
pdev = &at91sam9rl_uart0_device;
configure_usart0_pins(pins);
break;
case AT91SAM9RL_ID_US1:
pdev = &at91sam9rl_uart1_device;
configure_usart1_pins(pins);
break;
case AT91SAM9RL_ID_US2:
pdev = &at91sam9rl_uart2_device;
configure_usart2_pins(pins);
break;
case AT91SAM9RL_ID_US3:
pdev = &at91sam9rl_uart3_device;
configure_usart3_pins(pins);
break;
default:
return;
}
pdata = pdev->dev.platform_data;
pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
}
void __init at91_add_device_serial(void)
{
int i;
for (i = 0; i < ATMEL_MAX_UART; i++) {
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_add_device_serial(void) {}
#endif
/* -------------------------------------------------------------------- */
/*
* These devices are always present and don't need any board-specific
* setup.
*/
static int __init at91_add_standard_devices(void)
{
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();
at91_add_device_tc();
return 0;
}
arch_initcall(at91_add_standard_devices);
arch/arm/mach-at91/at91x40.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* arch/arm/mach-at91/at91x40.c
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
/*
* Export the clock functions for the AT91X40. Some external code common
* to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
void clk_disable(struct clk *clk)
{
}
unsigned long clk_get_rate(struct clk *clk)
{
return AT91X40_MASTER_CLOCK;
}
static void at91x40_idle(void)
{
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
__raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
cpu_do_idle();
}
void __init at91x40_initialize(unsigned long main_clock)
{
arm_pm_idle = at91x40_idle;
}
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
0, /* System Peripherals */
0, /* USART 0 */
0, /* USART 1 */
2, /* Timer Counter 0 */
2, /* Timer Counter 1 */
2, /* Timer Counter 2 */
0, /* Watchdog timer */
0, /* Parallel IO Controller A */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* External IRQ0 */
0, /* External IRQ1 */
0, /* External IRQ2 */
};
void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
if (!priority)
priority = at91x40_default_irq_priority;
at91_aic_init(priority, extern_irq);
}
arch/arm/mach-at91/at91x40_time.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* arch/arm/mach-at91/at91x40_time.c
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/at91x40.h>
#include <asm/mach/time.h>
#include "at91_tc.h"
#define at91_tc_read(field) \
__raw_readl(AT91_IO_P2V(AT91_TC) + field)
#define at91_tc_write(field, value) \
__raw_writel(value, AT91_IO_P2V(AT91_TC) + field)
/*
* 3 counter/timer units present.
*/
#define AT91_TC_CLK0BASE 0
#define AT91_TC_CLK1BASE 0x40
#define AT91_TC_CLK2BASE 0x80
static u32 at91x40_gettimeoffset(void)
{
return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
(AT91X40_MASTER_CLOCK / 128)) * 1000;
}
static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
{
at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
timer_tick();
return IRQ_HANDLED;
}
static struct irqaction at91x40_timer_irq = {
.name = "at91_tick",
.flags = IRQF_TIMER,
.handler = at91x40_timer_interrupt
};
void __init at91x40_timer_init(void)
{
unsigned int v;
arch_gettimeoffset = at91x40_gettimeoffset;
at91_tc_write(AT91_TC_BCR, 0);
v = at91_tc_read(AT91_TC_BMR);
v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
at91_tc_write(AT91_TC_BMR, v);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
}
arch/arm/mach-at91/board-eb01.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* arch/arm/mach-at91/board-eb01.c
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static void __init at91eb01_init_irq(void)
{
at91x40_init_interrupts(NULL);
}
static void __init at91eb01_init_early(void)
{
at91x40_initialize(40000000);
}
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.init_time = at91x40_timer_init,
.handle_irq = at91_aic_handle_irq,
.init_early = at91eb01_init_early,
.init_irq = at91eb01_init_irq,
MACHINE_END
arch/arm/mach-at91/board-sam9m10g45ek.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
*
* Covers: * AT91SAM9G45-EKES board
* * AT91SAM9M10G45-EK board
*
* Copyright (C) 2009 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/atmel-mci.h>
#include <linux/delay.h>
#include <linux/pwm.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/at91_adc.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
#include <media/soc_camera.h>
#include <media/atmel-isi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
#include "gpio.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
}
/*
* USB HS Host port (common to OHCI & EHCI)
*/
static struct at91_usbh_data __initdata ek_usbh_hs_data = {
.ports = 2,
.vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
.vbus_pin_active_low = {1, 1},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
* USB HS Device port
*/
static struct usba_platform_data __initdata ek_usba_udc_data = {
.vbus_pin = AT91_PIN_PB19,
};
/*
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
};
/*
* MCI (SD/MMC)
*/
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD10,
.wp_pin = -EINVAL,
},
};
static struct mci_platform_data __initdata mci1_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD11,
.wp_pin = AT91_PIN_PD29,
},
};
/*
* MACB Ethernet device
*/
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PD5,
.is_rmii = 1,
};
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
.size = SZ_64M,
},
{
.name = "Partition 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 2,
.ncs_write_setup = 0,
.nwe_setup = 2,
.ncs_read_pulse = 4,
.nrd_pulse = 4,
.ncs_write_pulse = 4,
.nwe_pulse = 4,
.read_cycle = 7,
.write_cycle = 7,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
.tdf_cycles = 3,
};
static void __init ek_add_device_nand(void)
{
ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
else
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
/*
* ISI
*/
static struct isi_platform_data __initdata isi_data = {
.frate = ISI_CFG1_FRATE_CAPTURE_ALL,
/* to use codec and preview path simultaneously */
.full_mode = 1,
.data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
/* ISI_MCK is provided by programmable clock or external clock */
.mck_hz = 25000000,
};
/*
* soc-camera OV2640
*/
#if defined(CONFIG_SOC_CAMERA_OV2640) || \
defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
{
/* ISI board for ek using default 8-bits connection */
return SOCAM_DATAWIDTH_8;
}
static int i2c_camera_power(struct device *dev, int on)
{
/* enable or disable the camera */
pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
at91_set_gpio_output(AT91_PIN_PD13, !on);
if (!on)
goto out;
/* If enabled, give a reset impulse */
at91_set_gpio_output(AT91_PIN_PD12, 0);
msleep(20);
at91_set_gpio_output(AT91_PIN_PD12, 1);
msleep(100);
out:
return 0;
}
static struct i2c_board_info i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
static struct soc_camera_link iclink_ov2640 = {
.bus_id = 0,
.board_info = &i2c_camera,
.i2c_adapter_id = 0,
.power = i2c_camera_power,
.query_bus_param = isi_camera_query_bus_param,
};
static struct platform_device isi_ov2640 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink_ov2640,
},
};
#endif
/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "LG",
.refresh = 60,
.xres = 480, .yres = 272,
.pixclock = KHZ2PICOS(9000),
.left_margin = 1, .right_margin = 1,
.upper_margin = 40, .lower_margin = 1,
.hsync_len = 45, .vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
};
static struct fb_monspecs at91fb_default_monspecs = {
.manufacturer = "LG",
.monitor = "LB043WQ1",
.modedb = at91_tft_vga_modes,
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
.hfmin = 15000,
.hfmax = 17640,
.vfmin = 57,
.vfmax = 67,
};
#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
/* Driver datas */
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 32,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.guard_time = 9,
.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif
/*
* ADCs and touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
.use_external_triggers = true,
.vref = 3300,
.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{ /* BP1, "leftclic" */
.code = BTN_LEFT,
.gpio = AT91_PIN_PB6,
.active_low = 1,
.desc = "left_click",
.wakeup = 1,
},
{ /* BP2, "rightclic" */
.code = BTN_RIGHT,
.gpio = AT91_PIN_PB7,
.active_low = 1,
.desc = "right_click",
.wakeup = 1,
},
/* BP3, "joystick" */
{
.code = KEY_LEFT,
.gpio = AT91_PIN_PB14,
.active_low = 1,
.desc = "Joystick Left",
},
{
.code = KEY_RIGHT,
.gpio = AT91_PIN_PB15,
.active_low = 1,
.desc = "Joystick Right",
},
{
.code = KEY_UP,
.gpio = AT91_PIN_PB16,
.active_low = 1,
.desc = "Joystick Up",
},
{
.code = KEY_DOWN,
.gpio = AT91_PIN_PB17,
.active_low = 1,
.desc = "Joystick Down",
},
{
.code = KEY_ENTER,
.gpio = AT91_PIN_PB18,
.active_low = 1,
.desc = "Joystick Press",
},
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
at91_set_deglitch(ek_buttons[i].gpio, 1);
}
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
/*
* AC97
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};
/*
* LEDs ... these could all be PWM-driven, for variable brightness
*/
static struct gpio_led ek_leds[] = {
{ /* "top" led, red, powerled */
.name = "d8",
.gpio = AT91_PIN_PD30,
.default_trigger = "heartbeat",
},
{ /* "left" led, green, userled2, pwm3 */
.name = "d6",
.gpio = AT91_PIN_PD0,
.active_low = 1,
.default_trigger = "nand-disk",
},
#if !IS_ENABLED(CONFIG_LEDS_PWM)
{ /* "right" led, green, userled1, pwm1 */
.name = "d7",
.gpio = AT91_PIN_PD31,
.active_low = 1,
.default_trigger = "mmc0",
},
#endif
};
/*
* PWM Leds
*/
static struct pwm_lookup pwm_lookup[] = {
PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7",
5000, PWM_POLARITY_INVERSED),
};
#if IS_ENABLED(CONFIG_LEDS_PWM)
static struct led_pwm pwm_leds[] = {
{ /* "right" led, green, userled1, pwm1 */
.name = "d7",
.max_brightness = 255,
},
};
static struct led_pwm_platform_data pwm_data = {
.num_leds = ARRAY_SIZE(pwm_leds),
.leds = pwm_leds,
};
static struct platform_device leds_pwm = {
.name = "leds_pwm",
.id = -1,
.dev = {
.platform_data = &pwm_data,
},
};
#endif
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_SOC_CAMERA_OV2640) || \
defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
&isi_ov2640,
#endif
#if IS_ENABLED(CONFIG_LEDS_PWM)
&leds_pwm,
#endif
};
static void __init ek_board_init(void)
{
at91_register_devices();
/* Serial */
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 not connected on the -EK board */
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
/* ISI, using programmable clock as ISI_MCK */
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* ADC and touchscreen */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
#if IS_ENABLED(CONFIG_LEDS_PWM)
at91_add_device_pwm(1 << AT91_PWM1);
#endif
/* Other platform devices */
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
.init_time = at91_init_time,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
arch/arm/mach-at91/board-sam9rlek.c deleted 100644 → 0
View file @ b9e0e5a9
/*
* Copyright (C) 2005 SAN People
* Copyright (C) 2007 Atmel Corporation
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/platform_data/at91_adc.h>
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
#include "gpio.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
}
/*
* USB HS Device port
*/
static struct usba_platform_data __initdata ek_usba_udc_data = {
.vbus_pin = AT91_PIN_PA8,
};
/*
* MCI (SD/MMC)
*/
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PA15,
.wp_pin = -EINVAL,
},
};
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
.size = SZ_256K,
},
{
.name = "Partition 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
.nwe_setup = 1,
.ncs_read_pulse = 3,
.nrd_pulse = 3,
.ncs_write_pulse = 3,
.nwe_pulse = 3,
.read_cycle = 5,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
.tdf_cycles = 2,
};
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
/*
* SPI devices
*/
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
};
/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "TX09D50VM1CCA @ 60",
.refresh = 60,
.xres = 240, .yres = 320,
.pixclock = KHZ2PICOS(4965),
.left_margin = 1, .right_margin = 33,
.upper_margin = 1, .lower_margin = 0,
.hsync_len = 5, .vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
},
};
static struct fb_monspecs at91fb_default_monspecs = {
.manufacturer = "HIT",
.monitor = "TX09D50VM1CCA",
.modedb = at91_tft_vga_modes,
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
.hfmin = 15000,
.hfmax = 64000,
.vfmin = 50,
.vfmax = 150,
};
#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif
/*
* AC97
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};
/*
* LEDs
*/
static struct gpio_led ek_leds[] = {
{ /* "bottom" led, green, userled1 to be defined */
.name = "ds1",
.gpio = AT91_PIN_PD15,
.active_low = 1,
.default_trigger = "none",
},
{ /* "bottom" led, green, userled2 to be defined */
.name = "ds2",
.gpio = AT91_PIN_PD16,
.active_low = 1,
.default_trigger = "none",
},
{ /* "power" led, yellow */
.name = "ds3",
.gpio = AT91_PIN_PD14,
.default_trigger = "heartbeat",
}
};
/*
* ADC + Touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
.use_external_triggers = true,
.vref = 3300,
.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{
.gpio = AT91_PIN_PB0,
.code = BTN_2,
.desc = "Right Click",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PB1,
.code = BTN_1,
.desc = "Left Click",
.active_low = 1,
.wakeup = 1,
}
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
at91_set_deglitch(AT91_PIN_PB1, 1);
at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
at91_set_deglitch(AT91_PIN_PB0, 1);
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
static void __init ek_board_init(void)
{
at91_register_devices();
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mci(0, &mci0_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller + ADC */
at91_add_device_adc(&ek_adc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
.init_time = at91_init_time,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
arch/arm/mach-at91/generic.h
View file @ 4b3d4d3d
......@@ -24,14 +24,12 @@ extern void __init at91_init_sram(int bank, unsigned long base,
/* Processors */
extern void __init at91rm9200_set_type(int type);
extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91rm9200_dt_initialize(void);
extern void __init at91_dt_initialize(void);
/* Interrupts */
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[],
unsigned int ext_irq_mask);
extern int __init at91_aic_of_init(struct device_node *node,
......@@ -50,7 +48,6 @@ extern void at91rm9200_ioremap_st(u32 addr);
extern void at91rm9200_timer_init(void);
extern void at91sam926x_ioremap_pit(u32 addr);
extern void at91sam926x_pit_init(int irq);
extern void at91x40_timer_init(void);
/* Clocks */
#ifdef CONFIG_OLD_CLK_AT91
......
arch/arm/mach-at91/include/mach/at91_dbgu.h
View file @ 4b3d4d3d
......@@ -16,7 +16,6 @@
#ifndef AT91_DBGU_H
#define AT91_DBGU_H
#if !defined(CONFIG_ARCH_AT91X40)
#define AT91_DBGU_CR (0x00) /* Control Register */
#define AT91_DBGU_MR (0x04) /* Mode Register */
#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
......@@ -34,8 +33,6 @@
#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */
#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
#endif /* AT91_DBGU */
/*
* Some AT91 parts that don't have full DEBUG units still support the ID
* and extensions register.
......
arch/arm/mach-at91/include/mach/at91x40.h deleted 100644 → 0
View file @ b9e0e5a9
/*
* arch/arm/mach-at91/include/mach/at91x40.h
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91X40_H
#define AT91X40_H
/*
* IRQ list.
*/
#define AT91X40_ID_USART0 2 /* USART port 0 */
#define AT91X40_ID_USART1 3 /* USART port 1 */
#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */
#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/
#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/
#define AT91X40_ID_WD 7 /* Watchdog? */
#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */
#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */
#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */
#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
/*
* System Peripherals
*/
#define AT91_BASE_SYS 0xffc00000
#define AT91_EBI 0xffe00000 /* External Bus Interface */
#define AT91_SF 0xfff00000 /* Special Function */
#define AT91_USART1 0xfffcc000 /* USART 1 */
#define AT91_USART0 0xfffd0000 /* USART 0 */
#define AT91_TC 0xfffe0000 /* Timer Counter */
#define AT91_PIOA 0xffff0000 /* PIO Controller A */
#define AT91_PS 0xffff4000 /* Power Save */
#define AT91_WD 0xffff8000 /* Watchdog Timer */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.
* But it does have a chip identify register and extension ID, so define at
* least these here.
*/
#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
/*
* Support defines for the simple Power Controller module.
*/
#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
#define AT91X40_MASTER_CLOCK 40000000
#endif /* AT91X40_H */
arch/arm/mach-at91/include/mach/cpu.h
View file @ 4b3d4d3d
......@@ -62,7 +62,6 @@
#define ARCH_EXID_SAMA5D43 0x00000003
#define ARCH_EXID_SAMA5D44 0x00000004
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
......
arch/arm/mach-at91/include/mach/hardware.h
View file @ 4b3d4d3d
......@@ -24,9 +24,6 @@
/* sama5d4 */
#define AT91_BASE_DBGU2 0xfc069000
#if defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
#include <mach/at91rm9200.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9261.h>
......@@ -51,8 +48,6 @@
*/
#define AT91_BASE_SYS 0xffffc000
#endif
/*
* On sama5d4 there is no system controller, we map some needed peripherals
*/
......
arch/arm/mach-at91/include/mach/uncompress.h
View file @ 4b3d4d3d
......@@ -31,7 +31,6 @@
void __iomem *at91_uart;
#if !defined(CONFIG_ARCH_AT91X40)
static const u32 uarts_rm9200[] = {
AT91_BASE_DBGU0,
AT91RM9200_BASE_US0,
......@@ -188,12 +187,6 @@ static inline void arch_decomp_setup(void)
at91_uart = NULL;
}
#else
static inline void arch_decomp_setup(void)
{
at91_uart = NULL;
}
#endif
/*
* The following code assumes the serial port has already been
......
arch/arm/mach-at91/setup.c
View file @ 4b3d4d3d
......@@ -418,7 +418,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
}
#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
#if defined(CONFIG_OF)
static struct of_device_id ramc_ids[] = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
......
drivers/rtc/Kconfig
View file @ 4b3d4d3d
......@@ -1110,7 +1110,7 @@ config RTC_DRV_AT91RM9200
config RTC_DRV_AT91SAM9
tristate "AT91SAM9 RTT as RTC"
depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
depends on ARCH_AT91 && !ARCH_AT91RM9200
select MFD_SYSCON
help
Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7