be2net: Fix Lancer error recovery to distinguish FW download

The Firmware update would be detected by looking at the sliport_error1/
sliport_error2 register values(0x02/0x00). If its not a FW reset the current
messaging would take place. If the error is due to FW reset, log a message to
user that "Firmware update in progress" and also do not log sliport_status and
sliport_error register values.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_hw.h

@@ -64,6 +64,9 @@
 #define SLIPORT_ERROR_NO_RESOURCE1	0x2
 #define SLIPORT_ERROR_NO_RESOURCE2	0x9
 
+#define SLIPORT_ERROR_FW_RESET1		0x2
+#define SLIPORT_ERROR_FW_RESET2		0x0
+
 /********* Memory BAR register ************/
 #define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 	0xfc
 /* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt

drivers/net/ethernet/emulex/benet/be_main.c

@@ -2464,9 +2464,17 @@ void be_detect_error(struct be_adapter *adapter)
 	 */
 	if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
 		adapter->hw_error = true;
+		/* Do not log error messages if its a FW reset */
+		if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 &&
+		    sliport_err2 == SLIPORT_ERROR_FW_RESET2) {
+			dev_info(&adapter->pdev->dev,
+				 "Firmware update in progress\n");
+			return;
+		} else {
 			dev_err(&adapter->pdev->dev,
 				"Error detected in the card\n");
 		}
+	}
 
 	if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
 		dev_err(&adapter->pdev->dev,
@@ -3812,6 +3820,8 @@ static int lancer_fw_download(struct be_adapter *adapter,
 	}
 
 	if (change_status == LANCER_FW_RESET_NEEDED) {
+		dev_info(&adapter->pdev->dev,
+			 "Resetting adapter to activate new FW\n");
 		status = lancer_physdev_ctrl(adapter,
 					     PHYSDEV_CONTROL_FW_RESET_MASK);
 		if (status) {
@@ -4363,13 +4373,13 @@ static int lancer_recover_func(struct be_adapter *adapter)
 			goto err;
 	}
 
-	dev_err(dev, "Error recovery successful\n");
+	dev_err(dev, "Adapter recovery successful\n");
 	return 0;
 err:
 	if (status == -EAGAIN)
 		dev_err(dev, "Waiting for resource provisioning\n");
 	else
-		dev_err(dev, "Error recovery failed\n");
+		dev_err(dev, "Adapter recovery failed\n");
 
 	return status;
 }