Commit 4c752782 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-soc

* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
  ARM: CSR: add missing sentinels to of_device_id tables
  ARM: cns3xxx: Fix newly introduced warnings in the PCIe code
  ARM: cns3xxx: Fix compile error caused by hardware.h removed
  ARM: davinci: fix cache flush build error
  ARM: davinci: correct MDSTAT_STATE_MASK
  ARM: davinci: da850 EVM: read mac address from SPI flash
  OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers
  OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]
  OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain
  OMAP4: clock: fix compile warning
  OMAP4: clock: re-enable previous clockdomain enable/disable sequence
  OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup
  OMAP: powerdomains: Make all powerdomain target states as ON at init
parents 14d01ff5 15ce9286
......@@ -8,7 +8,6 @@
* published by the Free Software Foundation.
*/
#include <mach/hardware.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
......
......@@ -13,7 +13,6 @@
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <mach/hardware.h>
static inline void arch_idle(void)
{
......
......@@ -8,7 +8,6 @@
*/
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/cns3xxx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
......
......@@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
return &cns3xxx_pcie[root->domain];
}
static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
{
return sysdata_to_cnspci(dev->sysdata);
}
......
......@@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = {
},
};
#ifdef CONFIG_MTD
static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
{
char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
size_t retlen;
if (!strcmp(mtd->name, "MAC-Address")) {
mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
if (retlen == ETH_ALEN)
pr_info("Read MAC addr from SPI Flash: %pM\n",
mac_addr);
}
}
static struct mtd_notifier da850evm_spi_notifier = {
.add = da850_evm_m25p80_notify_add,
};
static void da850_evm_setup_mac_addr(void)
{
register_mtd_user(&da850evm_spi_notifier);
}
#else
static void da850_evm_setup_mac_addr(void) { }
#endif
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "bootloaders + env",
......@@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void)
if (ret)
pr_warning("da850_evm_init: sata registration failed: %d\n",
ret);
da850_evm_setup_mac_addr();
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
......
......@@ -243,7 +243,7 @@
#define PSC_STATE_DISABLE 2
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x1f
#define MDSTAT_STATE_MASK 0x3f
#define MDCTL_FORCE BIT(31)
#ifndef __ASSEMBLER__
......
......@@ -217,7 +217,11 @@ ddr2clk_stop_done:
ENDPROC(davinci_ddr_psc_config)
CACHE_FLUSH:
#ifdef CONFIG_CPU_V6
.word v6_flush_kern_cache_all
#else
.word arm926_flush_kern_cache_all
#endif
ENTRY(davinci_cpu_suspend_sz)
.word . - davinci_cpu_suspend
......
......@@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
......@@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = {
.name = "wdt1_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
......
......@@ -3376,10 +3376,18 @@ int __init omap4xxx_clk_init(void)
} else if (cpu_is_omap446x()) {
cpu_mask = RATE_IN_4460;
cpu_clkflg = CK_446X;
} else {
return 0;
}
clk_init(&omap2_clk_functions);
omap2_clk_disable_clkdm_control();
/*
* Must stay commented until all OMAP SoC drivers are
* converted to runtime PM, or drivers may start crashing
*
* omap2_clk_disable_clkdm_control();
*/
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
......
......@@ -747,6 +747,7 @@ int clkdm_wakeup(struct clockdomain *clkdm)
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
ret = arch_clkdm->clkdm_wakeup(clkdm);
ret |= pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
return ret;
}
......@@ -818,6 +819,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_deny_idle(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
}
......
......@@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
.pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_core ->usbhsotg interface */
......
......@@ -130,7 +130,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
} else {
hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
pwrdm_wait_transition(pwrdm);
sleep_switch = FORCEWAKEUP_SWITCH;
}
}
......@@ -156,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
return ret;
}
pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
err:
return ret;
......
......@@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
/**
* pwrdm_init - set up the powerdomain layer
* @pwrdm_list: array of struct powerdomain pointers to register
* @pwrdms: array of struct powerdomain pointers to register
* @custom_funcs: func pointers for arch specific implementations
*
* Loop through the array of powerdomains @pwrdm_list, registering all
* that are available on the current CPU. If pwrdm_list is supplied
* and not null, all of the referenced powerdomains will be
* registered. No return value. XXX pwrdm_list is not really a
* "list"; it is an array. Rename appropriately.
* Loop through the array of powerdomains @pwrdms, registering all
* that are available on the current CPU. Also, program all
* powerdomain target state as ON; this is to prevent domains from
* hitting low power states (if bootloader has target states set to
* something other than ON) and potentially even losing context while
* PM is not fully initialized. The PM late init code can then program
* the desired target state for all the power domains. No return
* value.
*/
void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs)
void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
{
struct powerdomain **p = NULL;
struct powerdomain *temp_p;
if (!custom_funcs)
WARN(1, "powerdomain: No custom pwrdm functions registered\n");
else
arch_pwrdm = custom_funcs;
if (pwrdm_list) {
for (p = pwrdm_list; *p; p++)
if (pwrdms) {
for (p = pwrdms; *p; p++)
_pwrdm_register(*p);
}
list_for_each_entry(temp_p, &pwrdm_list, node)
pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
}
/**
......
......@@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void)
static struct of_device_id clkc_ids[] = {
{ .compatible = "sirf,prima2-clkc" },
{},
};
void __init sirfsoc_of_clk_init(void)
......
......@@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void)
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
{},
};
void __init sirfsoc_of_irq_init(void)
......
......@@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock);
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
{},
};
static int __init sirfsoc_of_rstc_init(void)
......
......@@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void)
static struct of_device_id timer_ids[] = {
{ .compatible = "sirf,prima2-tick" },
{},
};
static void __init sirfsoc_of_timer_map(void)
......
......@@ -615,6 +615,9 @@ static int _od_resume_noirq(struct device *dev)
return pm_generic_resume_noirq(dev);
}
#else
#define _od_suspend_noirq NULL
#define _od_resume_noirq NULL
#endif
static struct dev_pm_domain omap_device_pm_domain = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment