ARM: dts: Configure interconnect target module for omap4 dispc

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty until the child
devices are probing with ti-sysc interconnect driver.

We must now also configure sys_clk for reset to complete, the top
level module only keeps optional clocks enabled for it's own reset.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap4.dtsi

@@ -445,14 +445,39 @@ dss: dss@0 {
 				#size-cells = <1>;
 				ranges = <0 0 0x1000000>;
 
-				dispc@1000 {
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					ti,hwmods = "dss_dispc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
 						compatible = "ti,omap4-dispc";
-					reg = <0x1000 0x1000>;
+						reg = <0 0x1000>;
 						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-					ti,hwmods = "dss_dispc";
 						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
 						clock-names = "fck";
 					};
+				};
 
 				rfbi: encoder@2000  {
 					compatible = "ti,omap4-rfbi";