Commit 4cab2d5f authored by Ryan Lee's avatar Ryan Lee Committed by Mark Brown

ASoC: dt-bindings: max98388: add amplifier driver

Add dt-bindings information for Analog Devices MAX98388 I2S Amplifier
Signed-off-by: default avatarRyan Lee <ryans.lee@analog.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230613060945.183128-1-ryan.lee.analog@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent d84881e0
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/adi,max98388.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices MAX98388 Speaker Amplifier
maintainers:
- Ryan Lee <ryans.lee@analog.com>
description:
The MAX98388 is a mono Class-D speaker amplifier with I/V feedback.
The device provides a PCM interface for audio data and a standard
I2C interface for control data communication.
allOf:
- $ref: dai-common.yaml#
properties:
compatible:
enum:
- adi,max98388
reg:
maxItems: 1
'#sound-dai-cells':
const: 0
adi,vmon-slot-no:
description: slot number of the voltage feedback monitor
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 0
adi,imon-slot-no:
description: slot number of the current feedback monitor
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 1
adi,interleave-mode:
description:
For cases where a single combined channel for the I/V feedback data
is not sufficient, the device can also be configured to share
a single data output channel on alternating frames.
In this configuration, the current and voltage data will be frame
interleaved on a single output channel.
type: boolean
reset-gpios:
maxItems: 1
required:
- compatible
- reg
- '#sound-dai-cells'
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
max98388: amplifier@39 {
compatible = "adi,max98388";
reg = <0x39>;
#sound-dai-cells = <0>;
adi,vmon-slot-no = <0>;
adi,imon-slot-no = <1>;
adi,interleave-mode;
reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment