Skip to content

L
linux
Commit 4cef2269 authored by Rodrigo Siqueira's avatar Rodrigo Siqueira Committed by Alex Deucher
Browse files
Options

drm/amd/display: Move SubVP functions to dcn32_fpu 

It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: default avatarDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: default avatarHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: default avatarRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 8f5bb69d
Hide whitespace changes
Inline Side-by-side
Showing with 620 additions and 595 deletions
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
View file @ 4cef2269
......@@ -1624,171 +1624,6 @@ bool dcn32_release_post_bldn_3dlut(
return ret;
}
/**
********************************************************************************************
* dcn32_get_num_free_pipes: Calculate number of free pipes
*
* This function assumes that a "used" pipe is a pipe that has
* both a stream and a plane assigned to it.
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
*
* @return: Number of free pipes available in the context
*
********************************************************************************************
*/
static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *context)
{
unsigned int i;
unsigned int free_pipes = 0;
unsigned int num_pipes = 0;
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
if (pipe->stream && !pipe->top_pipe) {
while (pipe) {
num_pipes++;
pipe = pipe->bottom_pipe;
}
}
}
free_pipes = dc->res_pool->pipe_count - num_pipes;
return free_pipes;
}
/**
********************************************************************************************
* dcn32_assign_subvp_pipe: Function to decide which pipe will use Sub-VP.
*
* We enter this function if we are Sub-VP capable (i.e. enough pipes available)
* and regular P-State switching (i.e. VACTIVE/VBLANK) is not supported, or if
* we are forcing SubVP P-State switching on the current config.
*
* The number of pipes used for the chosen surface must be less than or equal to the
* number of free pipes available.
*
* In general we choose surfaces with the longest frame time first (better for SubVP + VBLANK).
* For multi-display cases the ActiveDRAMClockChangeMargin doesn't provide enough info on its own
* for determining which should be the SubVP pipe (need a way to determine if a pipe / plane doesn't
* support MCLK switching naturally [i.e. ACTIVE or VBLANK]).
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
* @param [out] index: dc pipe index for the pipe chosen to have phantom pipes assigned
*
* @return: True if a valid pipe assignment was found for Sub-VP. Otherwise false.
*
********************************************************************************************
*/
static bool dcn32_assign_subvp_pipe(struct dc *dc,
struct dc_state *context,
unsigned int *index)
{
unsigned int i, pipe_idx;
unsigned int max_frame_time = 0;
bool valid_assignment_found = false;
unsigned int free_pipes = dcn32_get_num_free_pipes(dc, context);
bool current_assignment_freesync = false;
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
unsigned int num_pipes = 0;
if (!pipe->stream)
continue;
if (pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_NONE) {
while (pipe) {
num_pipes++;
pipe = pipe->bottom_pipe;
}
pipe = &context->res_ctx.pipe_ctx[i];
if (num_pipes <= free_pipes) {
struct dc_stream_state *stream = pipe->stream;
unsigned int frame_us = (stream->timing.v_total * stream->timing.h_total /
(double)(stream->timing.pix_clk_100hz * 100)) * 1000000;
if (frame_us > max_frame_time && !stream->ignore_msa_timing_param) {
*index = i;
max_frame_time = frame_us;
valid_assignment_found = true;
current_assignment_freesync = false;
/* For the 2-Freesync display case, still choose the one with the
* longest frame time
*/
} else if (stream->ignore_msa_timing_param && (!valid_assignment_found ||
(current_assignment_freesync && frame_us > max_frame_time))) {
*index = i;
valid_assignment_found = true;
current_assignment_freesync = true;
}
}
}
pipe_idx++;
}
return valid_assignment_found;
}
/**
* ***************************************************************************************
* dcn32_enough_pipes_for_subvp: Function to check if there are "enough" pipes for SubVP.
*
* This function returns true if there are enough free pipes
* to create the required phantom pipes for any given stream
* (that does not already have phantom pipe assigned).
*
* e.g. For a 2 stream config where the first stream uses one
* pipe and the second stream uses 2 pipes (i.e. pipe split),
* this function will return true because there is 1 remaining
* pipe which can be used as the phantom pipe for the non pipe
* split pipe.
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
*
* @return: True if there are enough free pipes to assign phantom pipes to at least one
* stream that does not already have phantom pipes assigned. Otherwise false.
*
* ***************************************************************************************
*/
static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context)
{
unsigned int i, split_cnt, free_pipes;
unsigned int min_pipe_split = dc->res_pool->pipe_count + 1; // init as max number of pipes + 1
bool subvp_possible = false;
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
// Find the minimum pipe split count for non SubVP pipes
if (pipe->stream && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_NONE) {
split_cnt = 0;
while (pipe) {
split_cnt++;
pipe = pipe->bottom_pipe;
}
if (split_cnt < min_pipe_split)
min_pipe_split = split_cnt;
}
}
free_pipes = dcn32_get_num_free_pipes(dc, context);
// SubVP only possible if at least one pipe is being used (i.e. free_pipes
// should not equal to the pipe_count)
if (free_pipes >= min_pipe_split && free_pipes < dc->res_pool->pipe_count)
subvp_possible = true;
return subvp_possible;
}
static void dcn32_enable_phantom_plane(struct dc *dc,
struct dc_state *context,
struct dc_stream_state *phantom_stream,
......@@ -2033,436 +1868,6 @@ static struct pipe_ctx *dcn32_find_split_pipe(
return pipe;
}
/**
* ***************************************************************************************
* subvp_subvp_schedulable: Determine if SubVP + SubVP config is schedulable
*
* High level algorithm:
* 1. Find longest microschedule length (in us) between the two SubVP pipes
* 2. Check if the worst case overlap (VBLANK in middle of ACTIVE) for both
* pipes still allows for the maximum microschedule to fit in the active
* region for both pipes.
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
*
* @return: bool - True if the SubVP + SubVP config is schedulable, false otherwise
*
* ***************************************************************************************
*/
static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context)
{
struct pipe_ctx *subvp_pipes[2];
struct dc_stream_state *phantom = NULL;
uint32_t microschedule_lines = 0;
uint32_t index = 0;
uint32_t i;
uint32_t max_microschedule_us = 0;
int32_t vactive1_us, vactive2_us, vblank1_us, vblank2_us;
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
uint32_t time_us = 0;
/* Loop to calculate the maximum microschedule time between the two SubVP pipes,
* and also to store the two main SubVP pipe pointers in subvp_pipes[2].
*/
if (pipe->stream && pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_MAIN) {
phantom = pipe->stream->mall_stream_config.paired_stream;
microschedule_lines = (phantom->timing.v_total - phantom->timing.v_front_porch) +
phantom->timing.v_addressable;
// Round up when calculating microschedule time (+ 1 at the end)
time_us = (microschedule_lines * phantom->timing.h_total) /
(double)(phantom->timing.pix_clk_100hz * 100) * 1000000 +
dc->caps.subvp_prefetch_end_to_mall_start_us +
dc->caps.subvp_fw_processing_delay_us + 1;
if (time_us > max_microschedule_us)
max_microschedule_us = time_us;
subvp_pipes[index] = pipe;
index++;
// Maximum 2 SubVP pipes
if (index == 2)
break;
}
}
vactive1_us = ((subvp_pipes[0]->stream->timing.v_addressable * subvp_pipes[0]->stream->timing.h_total) /
(double)(subvp_pipes[0]->stream->timing.pix_clk_100hz * 100)) * 1000000;
vactive2_us = ((subvp_pipes[1]->stream->timing.v_addressable * subvp_pipes[1]->stream->timing.h_total) /
(double)(subvp_pipes[1]->stream->timing.pix_clk_100hz * 100)) * 1000000;
vblank1_us = (((subvp_pipes[0]->stream->timing.v_total - subvp_pipes[0]->stream->timing.v_addressable) *
subvp_pipes[0]->stream->timing.h_total) /
(double)(subvp_pipes[0]->stream->timing.pix_clk_100hz * 100)) * 1000000;
vblank2_us = (((subvp_pipes[1]->stream->timing.v_total - subvp_pipes[1]->stream->timing.v_addressable) *
subvp_pipes[1]->stream->timing.h_total) /
(double)(subvp_pipes[1]->stream->timing.pix_clk_100hz * 100)) * 1000000;
if ((vactive1_us - vblank2_us) / 2 > max_microschedule_us &&
(vactive2_us - vblank1_us) / 2 > max_microschedule_us)
return true;
return false;
}
/**
* ***************************************************************************************
* subvp_drr_schedulable: Determine if SubVP + DRR config is schedulable
*
* High level algorithm:
* 1. Get timing for SubVP pipe, phantom pipe, and DRR pipe
* 2. Determine the frame time for the DRR display when adding required margin for MCLK switching
* (the margin is equal to the MALL region + DRR margin (500us))
* 3.If (SubVP Active - Prefetch > Stretched DRR frame + max(MALL region, Stretched DRR frame))
* then report the configuration as supported
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
* @param [in] drr_pipe: DRR pipe_ctx for the SubVP + DRR config
*
* @return: bool - True if the SubVP + DRR config is schedulable, false otherwise
*
* ***************************************************************************************
*/
static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struct pipe_ctx *drr_pipe)
{
bool schedulable = false;
uint32_t i;
struct pipe_ctx *pipe = NULL;
struct dc_crtc_timing *main_timing = NULL;
struct dc_crtc_timing *phantom_timing = NULL;
struct dc_crtc_timing *drr_timing = NULL;
int16_t prefetch_us = 0;
int16_t mall_region_us = 0;
int16_t drr_frame_us = 0; // nominal frame time
int16_t subvp_active_us = 0;
int16_t stretched_drr_us = 0;
int16_t drr_stretched_vblank_us = 0;
int16_t max_vblank_mallregion = 0;
// Find SubVP pipe
for (i = 0; i < dc->res_pool->pipe_count; i++) {
pipe = &context->res_ctx.pipe_ctx[i];
// We check for master pipe, but it shouldn't matter since we only need
// the pipe for timing info (stream should be same for any pipe splits)
if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe)
continue;
// Find the SubVP pipe
if (pipe->stream->mall_stream_config.type == SUBVP_MAIN)
break;
}
main_timing = &pipe->stream->timing;
phantom_timing = &pipe->stream->mall_stream_config.paired_stream->timing;
drr_timing = &drr_pipe->stream->timing;
prefetch_us = (phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000 +
dc->caps.subvp_prefetch_end_to_mall_start_us;
subvp_active_us = main_timing->v_addressable * main_timing->h_total /
(double)(main_timing->pix_clk_100hz * 100) * 1000000;
drr_frame_us = drr_timing->v_total * drr_timing->h_total /
(double)(drr_timing->pix_clk_100hz * 100) * 1000000;
// P-State allow width and FW delays already included phantom_timing->v_addressable
mall_region_us = phantom_timing->v_addressable * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000;
stretched_drr_us = drr_frame_us + mall_region_us + SUBVP_DRR_MARGIN_US;
drr_stretched_vblank_us = (drr_timing->v_total - drr_timing->v_addressable) * drr_timing->h_total /
(double)(drr_timing->pix_clk_100hz * 100) * 1000000 + (stretched_drr_us - drr_frame_us);
max_vblank_mallregion = drr_stretched_vblank_us > mall_region_us ? drr_stretched_vblank_us : mall_region_us;
/* We consider SubVP + DRR schedulable if the stretched frame duration of the DRR display (i.e. the
* highest refresh rate + margin that can support UCLK P-State switch) passes the static analysis
* for VBLANK: (VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time,
* and the max of (VBLANK blanking time, MALL region)).
*/
if (stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 &&
subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0)
schedulable = true;
return schedulable;
}
/**
* ***************************************************************************************
* subvp_vblank_schedulable: Determine if SubVP + VBLANK config is schedulable
*
* High level algorithm:
* 1. Get timing for SubVP pipe, phantom pipe, and VBLANK pipe
* 2. If (SubVP Active - Prefetch > Vblank Frame Time + max(MALL region, Vblank blanking time))
* then report the configuration as supported
* 3. If the VBLANK display is DRR, then take the DRR static schedulability path
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
*
* @return: bool - True if the SubVP + VBLANK/DRR config is schedulable, false otherwise
*
* ***************************************************************************************
*/
static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context)
{
struct pipe_ctx *pipe = NULL;
struct pipe_ctx *subvp_pipe = NULL;
bool found = false;
bool schedulable = false;
uint32_t i = 0;
uint8_t vblank_index = 0;
uint16_t prefetch_us = 0;
uint16_t mall_region_us = 0;
uint16_t vblank_frame_us = 0;
uint16_t subvp_active_us = 0;
uint16_t vblank_blank_us = 0;
uint16_t max_vblank_mallregion = 0;
struct dc_crtc_timing *main_timing = NULL;
struct dc_crtc_timing *phantom_timing = NULL;
struct dc_crtc_timing *vblank_timing = NULL;
/* For SubVP + VBLANK/DRR cases, we assume there can only be
* a single VBLANK/DRR display. If DML outputs SubVP + VBLANK
* is supported, it is either a single VBLANK case or two VBLANK
* displays which are synchronized (in which case they have identical
* timings).
*/
for (i = 0; i < dc->res_pool->pipe_count; i++) {
pipe = &context->res_ctx.pipe_ctx[i];
// We check for master pipe, but it shouldn't matter since we only need
// the pipe for timing info (stream should be same for any pipe splits)
if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe)
continue;
if (!found && pipe->stream->mall_stream_config.type == SUBVP_NONE) {
// Found pipe which is not SubVP or Phantom (i.e. the VBLANK pipe).
vblank_index = i;
found = true;
}
if (!subvp_pipe && pipe->stream->mall_stream_config.type == SUBVP_MAIN)
subvp_pipe = pipe;
}
// Use ignore_msa_timing_param flag to identify as DRR
if (found && context->res_ctx.pipe_ctx[vblank_index].stream->ignore_msa_timing_param) {
// SUBVP + DRR case
schedulable = subvp_drr_schedulable(dc, context, &context->res_ctx.pipe_ctx[vblank_index]);
} else if (found) {
main_timing = &subvp_pipe->stream->timing;
phantom_timing = &subvp_pipe->stream->mall_stream_config.paired_stream->timing;
vblank_timing = &context->res_ctx.pipe_ctx[vblank_index].stream->timing;
// Prefetch time is equal to VACTIVE + BP + VSYNC of the phantom pipe
// Also include the prefetch end to mallstart delay time
prefetch_us = (phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000 +
dc->caps.subvp_prefetch_end_to_mall_start_us;
// P-State allow width and FW delays already included phantom_timing->v_addressable
mall_region_us = phantom_timing->v_addressable * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000;
vblank_frame_us = vblank_timing->v_total * vblank_timing->h_total /
(double)(vblank_timing->pix_clk_100hz * 100) * 1000000;
vblank_blank_us = (vblank_timing->v_total - vblank_timing->v_addressable) * vblank_timing->h_total /
(double)(vblank_timing->pix_clk_100hz * 100) * 1000000;
subvp_active_us = main_timing->v_addressable * main_timing->h_total /
(double)(main_timing->pix_clk_100hz * 100) * 1000000;
max_vblank_mallregion = vblank_blank_us > mall_region_us ? vblank_blank_us : mall_region_us;
// Schedulable if VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time,
// and the max of (VBLANK blanking time, MALL region)
// TODO: Possibly add some margin (i.e. the below conditions should be [...] > X instead of [...] > 0)
if (subvp_active_us - prefetch_us - vblank_frame_us - max_vblank_mallregion > 0)
schedulable = true;
}
return schedulable;
}
/**
* ********************************************************************************************
* subvp_validate_static_schedulability: Check which SubVP case is calculated and handle
* static analysis based on the case.
*
* Three cases:
* 1. SubVP + SubVP
* 2. SubVP + VBLANK (DRR checked internally)
* 3. SubVP + VACTIVE (currently unsupported)
*
* @param [in] dc: current dc state
* @param [in] context: new dc state
* @param [in] vlevel: Voltage level calculated by DML
*
* @return: bool - True if statically schedulable, false otherwise
*
* ********************************************************************************************
*/
static bool subvp_validate_static_schedulability(struct dc *dc,
struct dc_state *context,
int vlevel)
{
bool schedulable = true; // true by default for single display case
struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
uint32_t i, pipe_idx;
uint8_t subvp_count = 0;
uint8_t vactive_count = 0;
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
if (!pipe->stream)
continue;
if (pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_MAIN)
subvp_count++;
// Count how many planes are capable of VACTIVE switching (SubVP + VACTIVE unsupported)
if (vba->ActiveDRAMClockChangeLatencyMargin[vba->pipe_plane[pipe_idx]] > 0) {
vactive_count++;
}
pipe_idx++;
}
if (subvp_count == 2) {
// Static schedulability check for SubVP + SubVP case
schedulable = subvp_subvp_schedulable(dc, context);
} else if (vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_vblank_w_mall_sub_vp) {
// Static schedulability check for SubVP + VBLANK case. Also handle the case where
// DML outputs SubVP + VBLANK + VACTIVE (DML will report as SubVP + VBLANK)
if (vactive_count > 0)
schedulable = false;
else
schedulable = subvp_vblank_schedulable(dc, context);
} else if (vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_vactive_w_mall_sub_vp) {
// SubVP + VACTIVE currently unsupported
schedulable = false;
}
return schedulable;
}
static void dcn32_full_validate_bw_helper(struct dc *dc,
struct dc_state *context,
display_e2e_pipe_params_st *pipes,
int *vlevel,
int *split,
bool *merge,
int *pipe_cnt)
{
struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
unsigned int dc_pipe_idx = 0;
bool found_supported_config = false;
struct pipe_ctx *pipe = NULL;
uint32_t non_subvp_pipes = 0;
bool drr_pipe_found = false;
uint32_t drr_pipe_index = 0;
uint32_t i = 0;
/*
* DML favors voltage over p-state, but we're more interested in
* supporting p-state over voltage. We can't support p-state in
* prefetch mode > 0 so try capping the prefetch mode to start.
*/
context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
dm_prefetch_support_uclk_fclk_and_stutter;
*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
/* This may adjust vlevel and maxMpcComb */
if (*vlevel < context->bw_ctx.dml.soc.num_states)
*vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge);
/* Conditions for setting up phantom pipes for SubVP:
* 1. Not force disable SubVP
* 2. Full update (i.e. !fast_validate)
* 3. Enough pipes are available to support SubVP (TODO: Which pipes will use VACTIVE / VBLANK / SUBVP?)
* 4. Display configuration passes validation
* 5. (Config doesn't support MCLK in VACTIVE/VBLANK || dc->debug.force_subvp_mclk_switch)
*/
if (!dc->debug.force_disable_subvp && dcn32_all_pipes_have_stream_and_plane(dc, context) &&
(*vlevel == context->bw_ctx.dml.soc.num_states ||
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported ||
dc->debug.force_subvp_mclk_switch)) {
dcn32_merge_pipes_for_subvp(dc, context);
while (!found_supported_config && dcn32_enough_pipes_for_subvp(dc, context) &&
dcn32_assign_subvp_pipe(dc, context, &dc_pipe_idx)) {
/* For the case where *vlevel = num_states, bandwidth validation has failed for this config.
* Adding phantom pipes won't change the validation result, so change the DML input param
* for P-State support before adding phantom pipes and recalculating the DML result.
* However, this case is only applicable for SubVP + DRR cases because the prefetch mode
* will not allow for switch in VBLANK. The DRR display must have it's VBLANK stretched
* enough to support support MCLK switching.
*/
if (*vlevel == context->bw_ctx.dml.soc.num_states) {
context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
dm_prefetch_support_stutter;
/* There are params (such as FabricClock) that need to be recalculated
* after validation fails (otherwise it will be 0). Calculation for
* phantom vactive requires call into DML, so we must ensure all the
* vba params are valid otherwise we'll get incorrect phantom vactive.
*/
*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
}
dc->res_pool->funcs->add_phantom_pipes(dc, context, pipes, *pipe_cnt, dc_pipe_idx);
*pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false);
*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
if (*vlevel < context->bw_ctx.dml.soc.num_states &&
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] != dm_dram_clock_change_unsupported
&& subvp_validate_static_schedulability(dc, context, *vlevel)) {
found_supported_config = true;
} else if (*vlevel < context->bw_ctx.dml.soc.num_states &&
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported) {
/* Case where 1 SubVP is added, and DML reports MCLK unsupported. This handles
* the case for SubVP + DRR, where the DRR display does not support MCLK switch
* at it's native refresh rate / timing.
*/
for (i = 0; i < dc->res_pool->pipe_count; i++) {
pipe = &context->res_ctx.pipe_ctx[i];
if (pipe->stream && pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_NONE) {
non_subvp_pipes++;
// Use ignore_msa_timing_param flag to identify as DRR
if (pipe->stream->ignore_msa_timing_param) {
drr_pipe_found = true;
drr_pipe_index = i;
}
}
}
// If there is only 1 remaining non SubVP pipe that is DRR, check static
// schedulability for SubVP + DRR.
if (non_subvp_pipes == 1 && drr_pipe_found) {
found_supported_config = subvp_drr_schedulable(dc,
context, &context->res_ctx.pipe_ctx[drr_pipe_index]);
}
}
}
// If SubVP pipe config is unsupported (or cannot be used for UCLK switching)
// remove phantom pipes and repopulate dml pipes
if (!found_supported_config) {
dc->res_pool->funcs->remove_phantom_pipes(dc, context);
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] = dm_dram_clock_change_unsupported;
*pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false);
} else {
// only call dcn20_validate_apply_pipe_split_flags if we found a supported config
memset(split, 0, MAX_PIPES * sizeof(int));
memset(merge, 0, MAX_PIPES * sizeof(bool));
*vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge);
// Most populate phantom DLG params before programming hardware / timing for phantom pipe
DC_FP_START();
dcn32_helper_populate_phantom_dlg_params(dc, context, pipes, *pipe_cnt);
DC_FP_END();
// Note: We can't apply the phantom pipes to hardware at this time. We have to wait
// until driver has acquired the DMCUB lock to do it safely.
}
}
}
static bool dcn32_internal_validate_bw(
struct dc *dc,
struct dc_state *context,
......@@ -2498,7 +1903,9 @@ static bool dcn32_internal_validate_bw(
dml_log_pipe_params(&context->bw_ctx.dml, pipes, pipe_cnt);
if (!fast_validate) {
DC_FP_START();
dcn32_full_validate_bw_helper(dc, context, pipes, &vlevel, split, merge, &pipe_cnt);
DC_FP_END();
}
if (fast_validate || vlevel == context->bw_ctx.dml.soc.num_states ||
......
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
View file @ 4cef2269
......@@ -103,6 +103,8 @@ bool dcn32_all_pipes_have_stream_and_plane(struct dc *dc,
bool dcn32_subvp_in_use(struct dc *dc,
struct dc_state *context);
bool dcn32_mpo_in_use(struct dc_state *context);
void dcn32_determine_det_override(struct dc_state *context, display_e2e_pipe_params_st *pipes,
bool *is_pipe_split_expected, int pipe_cnt);
......
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
View file @ 4cef2269
......@@ -153,6 +153,17 @@ bool dcn32_subvp_in_use(struct dc *dc,
return false;
}
bool dcn32_mpo_in_use(struct dc_state *context)
{
uint32_t i;
for (i = 0; i < context->stream_count; i++) {
if (context->stream_status[i].plane_count > 1)
return true;
}
return false;
}
void dcn32_determine_det_override(struct dc_state *context, display_e2e_pipe_params_st *pipes,
bool *is_pipe_split_expected, int pipe_cnt)
{
......
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
View file @ 4cef2269
......@@ -24,6 +24,8 @@
*
*/
#include "dcn32_fpu.h"
#include "dcn32/dcn32_resource.h"
#include "dcn20/dcn20_resource.h"
#include "display_mode_vba_util_32.h"
// We need this includes for WATERMARKS_* defines
#include "clk_mgr/dcn32/dcn32_smu13_driver_if.h"
......@@ -461,3 +463,598 @@ void dcn32_set_phantom_stream_timing(struct dc *dc,
phantom_bp;
}
/**
* dcn32_get_num_free_pipes: Calculate number of free pipes
*
* This function assumes that a "used" pipe is a pipe that has
* both a stream and a plane assigned to it.
*
* @dc: current dc state
* @context: new dc state
*
* Return:
* Number of free pipes available in the context
*/
static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *context)
{
unsigned int i;
unsigned int free_pipes = 0;
unsigned int num_pipes = 0;
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
if (pipe->stream && !pipe->top_pipe) {
while (pipe) {
num_pipes++;
pipe = pipe->bottom_pipe;
}
}
}
free_pipes = dc->res_pool->pipe_count - num_pipes;
return free_pipes;
}
/**
* dcn32_assign_subvp_pipe: Function to decide which pipe will use Sub-VP.
*
* We enter this function if we are Sub-VP capable (i.e. enough pipes available)
* and regular P-State switching (i.e. VACTIVE/VBLANK) is not supported, or if
* we are forcing SubVP P-State switching on the current config.
*
* The number of pipes used for the chosen surface must be less than or equal to the
* number of free pipes available.
*
* In general we choose surfaces with the longest frame time first (better for SubVP + VBLANK).
* For multi-display cases the ActiveDRAMClockChangeMargin doesn't provide enough info on its own
* for determining which should be the SubVP pipe (need a way to determine if a pipe / plane doesn't
* support MCLK switching naturally [i.e. ACTIVE or VBLANK]).
*
* @param dc: current dc state
* @param context: new dc state
* @param index: [out] dc pipe index for the pipe chosen to have phantom pipes assigned
*
* Return:
* True if a valid pipe assignment was found for Sub-VP. Otherwise false.
*/
static bool dcn32_assign_subvp_pipe(struct dc *dc,
struct dc_state *context,
unsigned int *index)
{
unsigned int i, pipe_idx;
unsigned int max_frame_time = 0;
bool valid_assignment_found = false;
unsigned int free_pipes = dcn32_get_num_free_pipes(dc, context);
bool current_assignment_freesync = false;
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
unsigned int num_pipes = 0;
unsigned int refresh_rate = 0;
if (!pipe->stream)
continue;
// Round up
refresh_rate = (pipe->stream->timing.pix_clk_100hz * 100 +
pipe->stream->timing.v_total * pipe->stream->timing.h_total - 1)
/ (double)(pipe->stream->timing.v_total * pipe->stream->timing.h_total);
if (pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_NONE && refresh_rate < 120) {
while (pipe) {
num_pipes++;
pipe = pipe->bottom_pipe;
}
pipe = &context->res_ctx.pipe_ctx[i];
if (num_pipes <= free_pipes) {
struct dc_stream_state *stream = pipe->stream;
unsigned int frame_us = (stream->timing.v_total * stream->timing.h_total /
(double)(stream->timing.pix_clk_100hz * 100)) * 1000000;
if (frame_us > max_frame_time && !stream->ignore_msa_timing_param) {
*index = i;
max_frame_time = frame_us;
valid_assignment_found = true;
current_assignment_freesync = false;
/* For the 2-Freesync display case, still choose the one with the
* longest frame time
*/
} else if (stream->ignore_msa_timing_param && (!valid_assignment_found ||
(current_assignment_freesync && frame_us > max_frame_time))) {
*index = i;
valid_assignment_found = true;
current_assignment_freesync = true;
}
}
}
pipe_idx++;
}
return valid_assignment_found;
}
/**
* dcn32_enough_pipes_for_subvp: Function to check if there are "enough" pipes for SubVP.
*
* This function returns true if there are enough free pipes
* to create the required phantom pipes for any given stream
* (that does not already have phantom pipe assigned).
*
* e.g. For a 2 stream config where the first stream uses one
* pipe and the second stream uses 2 pipes (i.e. pipe split),
* this function will return true because there is 1 remaining
* pipe which can be used as the phantom pipe for the non pipe
* split pipe.
*
* @dc: current dc state
* @context: new dc state
*
* Return:
* True if there are enough free pipes to assign phantom pipes to at least one
* stream that does not already have phantom pipes assigned. Otherwise false.
*/
static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context)
{
unsigned int i, split_cnt, free_pipes;
unsigned int min_pipe_split = dc->res_pool->pipe_count + 1; // init as max number of pipes + 1
bool subvp_possible = false;
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
// Find the minimum pipe split count for non SubVP pipes
if (pipe->stream && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_NONE) {
split_cnt = 0;
while (pipe) {
split_cnt++;
pipe = pipe->bottom_pipe;
}
if (split_cnt < min_pipe_split)
min_pipe_split = split_cnt;
}
}
free_pipes = dcn32_get_num_free_pipes(dc, context);
// SubVP only possible if at least one pipe is being used (i.e. free_pipes
// should not equal to the pipe_count)
if (free_pipes >= min_pipe_split && free_pipes < dc->res_pool->pipe_count)
subvp_possible = true;
return subvp_possible;
}
/**
* subvp_subvp_schedulable: Determine if SubVP + SubVP config is schedulable
*
* High level algorithm:
* 1. Find longest microschedule length (in us) between the two SubVP pipes
* 2. Check if the worst case overlap (VBLANK in middle of ACTIVE) for both
* pipes still allows for the maximum microschedule to fit in the active
* region for both pipes.
*
* @dc: current dc state
* @context: new dc state
*
* Return:
* bool - True if the SubVP + SubVP config is schedulable, false otherwise
*/
static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context)
{
struct pipe_ctx *subvp_pipes[2];
struct dc_stream_state *phantom = NULL;
uint32_t microschedule_lines = 0;
uint32_t index = 0;
uint32_t i;
uint32_t max_microschedule_us = 0;
int32_t vactive1_us, vactive2_us, vblank1_us, vblank2_us;
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
uint32_t time_us = 0;
/* Loop to calculate the maximum microschedule time between the two SubVP pipes,
* and also to store the two main SubVP pipe pointers in subvp_pipes[2].
*/
if (pipe->stream && pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_MAIN) {
phantom = pipe->stream->mall_stream_config.paired_stream;
microschedule_lines = (phantom->timing.v_total - phantom->timing.v_front_porch) +
phantom->timing.v_addressable;
// Round up when calculating microschedule time (+ 1 at the end)
time_us = (microschedule_lines * phantom->timing.h_total) /
(double)(phantom->timing.pix_clk_100hz * 100) * 1000000 +
dc->caps.subvp_prefetch_end_to_mall_start_us +
dc->caps.subvp_fw_processing_delay_us + 1;
if (time_us > max_microschedule_us)
max_microschedule_us = time_us;
subvp_pipes[index] = pipe;
index++;
// Maximum 2 SubVP pipes
if (index == 2)
break;
}
}
vactive1_us = ((subvp_pipes[0]->stream->timing.v_addressable * subvp_pipes[0]->stream->timing.h_total) /
(double)(subvp_pipes[0]->stream->timing.pix_clk_100hz * 100)) * 1000000;
vactive2_us = ((subvp_pipes[1]->stream->timing.v_addressable * subvp_pipes[1]->stream->timing.h_total) /
(double)(subvp_pipes[1]->stream->timing.pix_clk_100hz * 100)) * 1000000;
vblank1_us = (((subvp_pipes[0]->stream->timing.v_total - subvp_pipes[0]->stream->timing.v_addressable) *
subvp_pipes[0]->stream->timing.h_total) /
(double)(subvp_pipes[0]->stream->timing.pix_clk_100hz * 100)) * 1000000;
vblank2_us = (((subvp_pipes[1]->stream->timing.v_total - subvp_pipes[1]->stream->timing.v_addressable) *
subvp_pipes[1]->stream->timing.h_total) /
(double)(subvp_pipes[1]->stream->timing.pix_clk_100hz * 100)) * 1000000;
if ((vactive1_us - vblank2_us) / 2 > max_microschedule_us &&
(vactive2_us - vblank1_us) / 2 > max_microschedule_us)
return true;
return false;
}
/**
* subvp_drr_schedulable: Determine if SubVP + DRR config is schedulable
*
* High level algorithm:
* 1. Get timing for SubVP pipe, phantom pipe, and DRR pipe
* 2. Determine the frame time for the DRR display when adding required margin for MCLK switching
* (the margin is equal to the MALL region + DRR margin (500us))
* 3.If (SubVP Active - Prefetch > Stretched DRR frame + max(MALL region, Stretched DRR frame))
* then report the configuration as supported
*
* @dc: current dc state
* @context: new dc state
* @drr_pipe: DRR pipe_ctx for the SubVP + DRR config
*
* Return:
* bool - True if the SubVP + DRR config is schedulable, false otherwise
*/
static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struct pipe_ctx *drr_pipe)
{
bool schedulable = false;
uint32_t i;
struct pipe_ctx *pipe = NULL;
struct dc_crtc_timing *main_timing = NULL;
struct dc_crtc_timing *phantom_timing = NULL;
struct dc_crtc_timing *drr_timing = NULL;
int16_t prefetch_us = 0;
int16_t mall_region_us = 0;
int16_t drr_frame_us = 0; // nominal frame time
int16_t subvp_active_us = 0;
int16_t stretched_drr_us = 0;
int16_t drr_stretched_vblank_us = 0;
int16_t max_vblank_mallregion = 0;
// Find SubVP pipe
for (i = 0; i < dc->res_pool->pipe_count; i++) {
pipe = &context->res_ctx.pipe_ctx[i];
// We check for master pipe, but it shouldn't matter since we only need
// the pipe for timing info (stream should be same for any pipe splits)
if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe)
continue;
// Find the SubVP pipe
if (pipe->stream->mall_stream_config.type == SUBVP_MAIN)
break;
}
main_timing = &pipe->stream->timing;
phantom_timing = &pipe->stream->mall_stream_config.paired_stream->timing;
drr_timing = &drr_pipe->stream->timing;
prefetch_us = (phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000 +
dc->caps.subvp_prefetch_end_to_mall_start_us;
subvp_active_us = main_timing->v_addressable * main_timing->h_total /
(double)(main_timing->pix_clk_100hz * 100) * 1000000;
drr_frame_us = drr_timing->v_total * drr_timing->h_total /
(double)(drr_timing->pix_clk_100hz * 100) * 1000000;
// P-State allow width and FW delays already included phantom_timing->v_addressable
mall_region_us = phantom_timing->v_addressable * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000;
stretched_drr_us = drr_frame_us + mall_region_us + SUBVP_DRR_MARGIN_US;
drr_stretched_vblank_us = (drr_timing->v_total - drr_timing->v_addressable) * drr_timing->h_total /
(double)(drr_timing->pix_clk_100hz * 100) * 1000000 + (stretched_drr_us - drr_frame_us);
max_vblank_mallregion = drr_stretched_vblank_us > mall_region_us ? drr_stretched_vblank_us : mall_region_us;
/* We consider SubVP + DRR schedulable if the stretched frame duration of the DRR display (i.e. the
* highest refresh rate + margin that can support UCLK P-State switch) passes the static analysis
* for VBLANK: (VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time,
* and the max of (VBLANK blanking time, MALL region)).
*/
if (stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 &&
subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0)
schedulable = true;
return schedulable;
}
/**
* subvp_vblank_schedulable: Determine if SubVP + VBLANK config is schedulable
*
* High level algorithm:
* 1. Get timing for SubVP pipe, phantom pipe, and VBLANK pipe
* 2. If (SubVP Active - Prefetch > Vblank Frame Time + max(MALL region, Vblank blanking time))
* then report the configuration as supported
* 3. If the VBLANK display is DRR, then take the DRR static schedulability path
*
* @dc: current dc state
* @context: new dc state
*
* Return:
* bool - True if the SubVP + VBLANK/DRR config is schedulable, false otherwise
*/
static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context)
{
struct pipe_ctx *pipe = NULL;
struct pipe_ctx *subvp_pipe = NULL;
bool found = false;
bool schedulable = false;
uint32_t i = 0;
uint8_t vblank_index = 0;
uint16_t prefetch_us = 0;
uint16_t mall_region_us = 0;
uint16_t vblank_frame_us = 0;
uint16_t subvp_active_us = 0;
uint16_t vblank_blank_us = 0;
uint16_t max_vblank_mallregion = 0;
struct dc_crtc_timing *main_timing = NULL;
struct dc_crtc_timing *phantom_timing = NULL;
struct dc_crtc_timing *vblank_timing = NULL;
/* For SubVP + VBLANK/DRR cases, we assume there can only be
* a single VBLANK/DRR display. If DML outputs SubVP + VBLANK
* is supported, it is either a single VBLANK case or two VBLANK
* displays which are synchronized (in which case they have identical
* timings).
*/
for (i = 0; i < dc->res_pool->pipe_count; i++) {
pipe = &context->res_ctx.pipe_ctx[i];
// We check for master pipe, but it shouldn't matter since we only need
// the pipe for timing info (stream should be same for any pipe splits)
if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe)
continue;
if (!found && pipe->stream->mall_stream_config.type == SUBVP_NONE) {
// Found pipe which is not SubVP or Phantom (i.e. the VBLANK pipe).
vblank_index = i;
found = true;
}
if (!subvp_pipe && pipe->stream->mall_stream_config.type == SUBVP_MAIN)
subvp_pipe = pipe;
}
// Use ignore_msa_timing_param flag to identify as DRR
if (found && context->res_ctx.pipe_ctx[vblank_index].stream->ignore_msa_timing_param) {
// SUBVP + DRR case
schedulable = subvp_drr_schedulable(dc, context, &context->res_ctx.pipe_ctx[vblank_index]);
} else if (found) {
main_timing = &subvp_pipe->stream->timing;
phantom_timing = &subvp_pipe->stream->mall_stream_config.paired_stream->timing;
vblank_timing = &context->res_ctx.pipe_ctx[vblank_index].stream->timing;
// Prefetch time is equal to VACTIVE + BP + VSYNC of the phantom pipe
// Also include the prefetch end to mallstart delay time
prefetch_us = (phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000 +
dc->caps.subvp_prefetch_end_to_mall_start_us;
// P-State allow width and FW delays already included phantom_timing->v_addressable
mall_region_us = phantom_timing->v_addressable * phantom_timing->h_total /
(double)(phantom_timing->pix_clk_100hz * 100) * 1000000;
vblank_frame_us = vblank_timing->v_total * vblank_timing->h_total /
(double)(vblank_timing->pix_clk_100hz * 100) * 1000000;
vblank_blank_us = (vblank_timing->v_total - vblank_timing->v_addressable) * vblank_timing->h_total /
(double)(vblank_timing->pix_clk_100hz * 100) * 1000000;
subvp_active_us = main_timing->v_addressable * main_timing->h_total /
(double)(main_timing->pix_clk_100hz * 100) * 1000000;
max_vblank_mallregion = vblank_blank_us > mall_region_us ? vblank_blank_us : mall_region_us;
// Schedulable if VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time,
// and the max of (VBLANK blanking time, MALL region)
// TODO: Possibly add some margin (i.e. the below conditions should be [...] > X instead of [...] > 0)
if (subvp_active_us - prefetch_us - vblank_frame_us - max_vblank_mallregion > 0)
schedulable = true;
}
return schedulable;
}
/**
* subvp_validate_static_schedulability: Check which SubVP case is calculated and handle
* static analysis based on the case.
*
* Three cases:
* 1. SubVP + SubVP
* 2. SubVP + VBLANK (DRR checked internally)
* 3. SubVP + VACTIVE (currently unsupported)
*
* @dc: current dc state
* @context: new dc state
* @vlevel: Voltage level calculated by DML
*
* Return:
* bool - True if statically schedulable, false otherwise
*/
static bool subvp_validate_static_schedulability(struct dc *dc,
struct dc_state *context,
int vlevel)
{
bool schedulable = true; // true by default for single display case
struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
uint32_t i, pipe_idx;
uint8_t subvp_count = 0;
uint8_t vactive_count = 0;
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
if (!pipe->stream)
continue;
if (pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_MAIN)
subvp_count++;
// Count how many planes that aren't SubVP/phantom are capable of VACTIVE
// switching (SubVP + VACTIVE unsupported). In situations where we force
// SubVP for a VACTIVE plane, we don't want to increment the vactive_count.
if (vba->ActiveDRAMClockChangeLatencyMargin[vba->pipe_plane[pipe_idx]] > 0 &&
pipe->stream->mall_stream_config.type == SUBVP_NONE) {
vactive_count++;
}
pipe_idx++;
}
if (subvp_count == 2) {
// Static schedulability check for SubVP + SubVP case
schedulable = subvp_subvp_schedulable(dc, context);
} else if (vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_vblank_w_mall_sub_vp) {
// Static schedulability check for SubVP + VBLANK case. Also handle the case where
// DML outputs SubVP + VBLANK + VACTIVE (DML will report as SubVP + VBLANK)
if (vactive_count > 0)
schedulable = false;
else
schedulable = subvp_vblank_schedulable(dc, context);
} else if (vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_vactive_w_mall_sub_vp &&
vactive_count > 0) {
// For single display SubVP cases, DML will output dm_dram_clock_change_vactive_w_mall_sub_vp by default.
// We tell the difference between SubVP vs. SubVP + VACTIVE by checking the vactive_count.
// SubVP + VACTIVE currently unsupported
schedulable = false;
}
return schedulable;
}
void dcn32_full_validate_bw_helper(struct dc *dc,
struct dc_state *context,
display_e2e_pipe_params_st *pipes,
int *vlevel,
int *split,
bool *merge,
int *pipe_cnt)
{
struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
unsigned int dc_pipe_idx = 0;
bool found_supported_config = false;
struct pipe_ctx *pipe = NULL;
uint32_t non_subvp_pipes = 0;
bool drr_pipe_found = false;
uint32_t drr_pipe_index = 0;
uint32_t i = 0;
dc_assert_fp_enabled();
/*
* DML favors voltage over p-state, but we're more interested in
* supporting p-state over voltage. We can't support p-state in
* prefetch mode > 0 so try capping the prefetch mode to start.
*/
context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
dm_prefetch_support_uclk_fclk_and_stutter;
*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
/* This may adjust vlevel and maxMpcComb */
if (*vlevel < context->bw_ctx.dml.soc.num_states)
*vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge);
/* Conditions for setting up phantom pipes for SubVP:
* 1. Not force disable SubVP
* 2. Full update (i.e. !fast_validate)
* 3. Enough pipes are available to support SubVP (TODO: Which pipes will use VACTIVE / VBLANK / SUBVP?)
* 4. Display configuration passes validation
* 5. (Config doesn't support MCLK in VACTIVE/VBLANK || dc->debug.force_subvp_mclk_switch)
*/
if (!dc->debug.force_disable_subvp && dcn32_all_pipes_have_stream_and_plane(dc, context) &&
!dcn32_mpo_in_use(context) && (*vlevel == context->bw_ctx.dml.soc.num_states ||
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported ||
dc->debug.force_subvp_mclk_switch)) {
dcn32_merge_pipes_for_subvp(dc, context);
while (!found_supported_config && dcn32_enough_pipes_for_subvp(dc, context) &&
dcn32_assign_subvp_pipe(dc, context, &dc_pipe_idx)) {
/* For the case where *vlevel = num_states, bandwidth validation has failed for this config.
* Adding phantom pipes won't change the validation result, so change the DML input param
* for P-State support before adding phantom pipes and recalculating the DML result.
* However, this case is only applicable for SubVP + DRR cases because the prefetch mode
* will not allow for switch in VBLANK. The DRR display must have it's VBLANK stretched
* enough to support MCLK switching.
*/
if (*vlevel == context->bw_ctx.dml.soc.num_states) {
context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final =
dm_prefetch_support_stutter;
/* There are params (such as FabricClock) that need to be recalculated
* after validation fails (otherwise it will be 0). Calculation for
* phantom vactive requires call into DML, so we must ensure all the
* vba params are valid otherwise we'll get incorrect phantom vactive.
*/
*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
}
dc->res_pool->funcs->add_phantom_pipes(dc, context, pipes, *pipe_cnt, dc_pipe_idx);
*pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false);
// Populate dppclk to trigger a recalculate in dml_get_voltage_level
// so the phantom pipe DLG params can be assigned correctly.
pipes[0].clks_cfg.dppclk_mhz = get_dppclk_calculated(&context->bw_ctx.dml, pipes, *pipe_cnt, 0);
*vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
if (*vlevel < context->bw_ctx.dml.soc.num_states &&
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] != dm_dram_clock_change_unsupported
&& subvp_validate_static_schedulability(dc, context, *vlevel)) {
found_supported_config = true;
} else if (*vlevel < context->bw_ctx.dml.soc.num_states &&
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported) {
/* Case where 1 SubVP is added, and DML reports MCLK unsupported. This handles
* the case for SubVP + DRR, where the DRR display does not support MCLK switch
* at it's native refresh rate / timing.
*/
for (i = 0; i < dc->res_pool->pipe_count; i++) {
pipe = &context->res_ctx.pipe_ctx[i];
if (pipe->stream && pipe->plane_state && !pipe->top_pipe &&
pipe->stream->mall_stream_config.type == SUBVP_NONE) {
non_subvp_pipes++;
// Use ignore_msa_timing_param flag to identify as DRR
if (pipe->stream->ignore_msa_timing_param) {
drr_pipe_found = true;
drr_pipe_index = i;
}
}
}
// If there is only 1 remaining non SubVP pipe that is DRR, check static
// schedulability for SubVP + DRR.
if (non_subvp_pipes == 1 && drr_pipe_found) {
found_supported_config = subvp_drr_schedulable(dc, context,
&context->res_ctx.pipe_ctx[drr_pipe_index]);
}
}
}
// If SubVP pipe config is unsupported (or cannot be used for UCLK switching)
// remove phantom pipes and repopulate dml pipes
if (!found_supported_config) {
dc->res_pool->funcs->remove_phantom_pipes(dc, context);
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] = dm_dram_clock_change_unsupported;
*pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false);
} else {
// only call dcn20_validate_apply_pipe_split_flags if we found a supported config
memset(split, 0, MAX_PIPES * sizeof(int));
memset(merge, 0, MAX_PIPES * sizeof(bool));
*vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge);
// Most populate phantom DLG params before programming hardware / timing for phantom pipe
DC_FP_START();
dcn32_helper_populate_phantom_dlg_params(dc, context, pipes, *pipe_cnt);
DC_FP_END();
// Note: We can't apply the phantom pipes to hardware at this time. We have to wait
// until driver has acquired the DMCUB lock to do it safely.
}
}
}
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.h
View file @ 4cef2269
......@@ -57,4 +57,12 @@ void dcn32_set_phantom_stream_timing(struct dc *dc,
unsigned int pipe_cnt,
unsigned int dc_pipe_idx);
void dcn32_full_validate_bw_helper(struct dc *dc,
struct dc_state *context,
display_e2e_pipe_params_st *pipes,
int *vlevel,
int *split,
bool *merge,
int *pipe_cnt);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7