spi: spi-altera-dfl: support n5010 feature revision

The Max10 BMC on the Silicom n5010 PAC is slightly different than the
existing BMCs, so use a dedicated feature revision detect it.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Signed-off-by: Moritz Fischer <mdf@kernel.org>

drivers/spi/spi-altera-dfl.c

@@ -104,13 +104,6 @@ static const struct regmap_config indirect_regbus_cfg = {
 	.reg_read = indirect_bus_reg_read,
 };
 
-static struct spi_board_info m10_bmc_info = {
-	.modalias = "m10-d5005",
-	.max_speed_hz = 12500000,
-	.bus_num = 0,
-	.chip_select = 0,
-};
-
 static void config_spi_master(void __iomem *base, struct spi_master *master)
 {
 	u64 v;
@@ -130,6 +123,7 @@ static void config_spi_master(void __iomem *base, struct spi_master *master)
 
 static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
 {
+	struct spi_board_info board_info = { 0 };
 	struct device *dev = &dfl_dev->dev;
 	struct spi_master *master;
 	struct altera_spi *hw;
@@ -170,9 +164,18 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
 		goto exit;
 	}
 
-	if (!spi_new_device(master,  &m10_bmc_info)) {
+	if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
+		strscpy(board_info.modalias, "m10-n5010", SPI_NAME_SIZE);
+	else
+		strscpy(board_info.modalias, "m10-d5005", SPI_NAME_SIZE);
+
+	board_info.max_speed_hz = 12500000;
+	board_info.bus_num = 0;
+	board_info.chip_select = 0;
+
+	if (!spi_new_device(master, &board_info)) {
 		dev_err(dev, "%s failed to create SPI device: %s\n",
-			__func__, m10_bmc_info.modalias);
+			__func__, board_info.modalias);
 	}
 
 	return 0;