Commit 4f4e54b1 authored by Kalesh AP's avatar Kalesh AP Committed by Paolo Abeni

bnxt_en: Fix a possible NULL pointer dereference in unload path

In the driver unload path, the driver currently checks the valid
BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before
proceeding.  This is flawed because the flag may not be set initially
during driver load.  It may be set later after the NVRAM setting is
changed followed by a firmware reset.  Relying on the
BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if
the aux device was never initialized:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 8ae6aa067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021
RIP: 0010:device_del+0x1b/0x410
Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0
RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000
RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400
R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080
R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en]
 bnxt_remove_one+0x2f/0x1f0 [bnxt_en]
 pci_device_remove+0x3b/0xc0
 device_release_driver_internal+0x103/0x1f0
 driver_detach+0x54/0x88
 bus_remove_driver+0x77/0xc9
 pci_unregister_driver+0x2d/0xb0
 bnxt_exit+0x16/0x2c [bnxt_en]
 __x64_sys_delete_module+0x139/0x280
 do_syscall_64+0x5b/0x1a0
 entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7fc98f3af71b

Fix this by modifying the check inside bnxt_rdma_aux_device_uninit()
to check for bp->aux_priv instead.  We also need to make some changes
in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set
only when the aux device is fully initialized.

Fixes: d80d88b0 ("bnxt_en: Add auxiliary driver support")
Reviewed-by: default avatarAjit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: default avatarKalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parent e8b51a1a
...@@ -304,7 +304,7 @@ void bnxt_rdma_aux_device_uninit(struct bnxt *bp) ...@@ -304,7 +304,7 @@ void bnxt_rdma_aux_device_uninit(struct bnxt *bp)
struct auxiliary_device *adev; struct auxiliary_device *adev;
/* Skip if no auxiliary device init was done. */ /* Skip if no auxiliary device init was done. */
if (!(bp->flags & BNXT_FLAG_ROCE_CAP)) if (!bp->aux_priv)
return; return;
aux_priv = bp->aux_priv; aux_priv = bp->aux_priv;
...@@ -324,6 +324,7 @@ static void bnxt_aux_dev_release(struct device *dev) ...@@ -324,6 +324,7 @@ static void bnxt_aux_dev_release(struct device *dev)
bp->edev = NULL; bp->edev = NULL;
kfree(aux_priv->edev); kfree(aux_priv->edev);
kfree(aux_priv); kfree(aux_priv);
bp->aux_priv = NULL;
} }
static void bnxt_set_edev_info(struct bnxt_en_dev *edev, struct bnxt *bp) static void bnxt_set_edev_info(struct bnxt_en_dev *edev, struct bnxt *bp)
...@@ -359,19 +360,18 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp) ...@@ -359,19 +360,18 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp)
if (!(bp->flags & BNXT_FLAG_ROCE_CAP)) if (!(bp->flags & BNXT_FLAG_ROCE_CAP))
return; return;
bp->aux_priv = kzalloc(sizeof(*bp->aux_priv), GFP_KERNEL); aux_priv = kzalloc(sizeof(*bp->aux_priv), GFP_KERNEL);
if (!bp->aux_priv) if (!aux_priv)
goto exit; goto exit;
bp->aux_priv->id = ida_alloc(&bnxt_aux_dev_ids, GFP_KERNEL); aux_priv->id = ida_alloc(&bnxt_aux_dev_ids, GFP_KERNEL);
if (bp->aux_priv->id < 0) { if (aux_priv->id < 0) {
netdev_warn(bp->dev, netdev_warn(bp->dev,
"ida alloc failed for ROCE auxiliary device\n"); "ida alloc failed for ROCE auxiliary device\n");
kfree(bp->aux_priv); kfree(aux_priv);
goto exit; goto exit;
} }
aux_priv = bp->aux_priv;
aux_dev = &aux_priv->aux_dev; aux_dev = &aux_priv->aux_dev;
aux_dev->id = aux_priv->id; aux_dev->id = aux_priv->id;
aux_dev->name = "rdma"; aux_dev->name = "rdma";
...@@ -380,10 +380,11 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp) ...@@ -380,10 +380,11 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp)
rc = auxiliary_device_init(aux_dev); rc = auxiliary_device_init(aux_dev);
if (rc) { if (rc) {
ida_free(&bnxt_aux_dev_ids, bp->aux_priv->id); ida_free(&bnxt_aux_dev_ids, aux_priv->id);
kfree(bp->aux_priv); kfree(aux_priv);
goto exit; goto exit;
} }
bp->aux_priv = aux_priv;
/* From this point, all cleanup will happen via the .release callback & /* From this point, all cleanup will happen via the .release callback &
* any error unwinding will need to include a call to * any error unwinding will need to include a call to
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment