Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits)
  hwmon: (vt8231) fix sparse warning
  hwmon: (sis5595) fix sparse warning
  hwmon: (w83627hf) don't assume bank 0
  hwmon: (w83627hf) Fix setting fan min right after driver load
  hwmon: (w83627hf) De-macro sysfs callback functions
  hwmon: Add new combined driver for FSC chips
  hwmon: (ibmpex) Release IPMI user if hwmon registration fails
  hwmon: (dme1737) Add sch311x support
  hwmon: (dme1737) group functions logically
  hwmon: (dme1737) cleanups
  hwmon: IBM power meter driver
  hwmon: (coretemp) Add support for Celeron 4xx
  hwmon: (lm87) Disable VID when it should be
  hwmon: (w83781d) Add individual alarm and beep files
  hwmon: VRM is not read from registers
  MAINTAINERS: update hwmon subsystem git trees
  hwmon: Fix the code examples in documentation
  hwmon: update sysfs interface document - error handling
  hwmon: (thmc50) Fix a debug message
  hwmon: (thmc50) Don't create temp3 if not enabled
  ...

Documentation/hwmon/coretemp

@@ -4,7 +4,7 @@ Kernel driver coretemp
 Supported chips:
   * All Intel Core family
     Prefix: 'coretemp'
-    CPUID: family 0x6, models 0xe, 0xf
+    CPUID: family 0x6, models 0xe, 0xf, 0x16
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
 

Documentation/hwmon/dme1737

@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'dme1737'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Provided by SMSC upon request and under NDA
+  * SMSC SCH3112, SCH3114, SCH3116
+    Prefix: 'sch311x'
+    Addresses scanned: none, address read from Super-I/O config space
+    Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -27,16 +31,25 @@ Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same) Super-I/O chips. This chip
-features monitoring of 3 temp sensors temp[1-3] (2 remote diodes and 1
-internal), 7 voltages in[0-6] (6 external and 1 internal) and 6 fan speeds
-fan[1-6]. Additionally, the chip implements 5 PWM outputs pwm[1-3,5-6] for
-controlling fan speeds both manually and automatically.
-
-Fan[3-6] and pwm[3,5-6] are optional features and their availability is
-dependent on the configuration of the chip. The driver will detect which
-features are present during initialization and create the sysfs attributes
-accordingly.
+SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O
+chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote
+diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up
+to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM
+outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+automatically.
+
+For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6]
+and pwm[3,5-6] are optional features and their availability depends on the
+configuration of the chip. The driver will detect which features are present
+during initialization and create the sysfs attributes accordingly.
+
+For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
+pwm[5-6] don't exist.
+
+The hardware monitoring features of the DME1737 and A8000 are only accessible
+via SMBus, while the SCH311x only provides access via the ISA bus. The driver
+will therefore register itself as an I2C client driver if it detects a DME1737
+or A8000 and as a platform driver if it detects a SCH311x chip.
 
 
 Voltage Monitoring

Documentation/hwmon/f71805f

@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'f71805f'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71806F/FG
+    Prefix: 'f71872f'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F71872F/FG
     Prefix: 'f71872f'
     Addresses scanned: none, address read from Super I/O config space
@@ -38,6 +42,9 @@ The Fintek F71872F/FG Super I/O chip is almost the same, with two
 additional internal voltages monitored (VSB and battery). It also features
 6 VID inputs. The VID inputs are not yet supported by this driver.
 
+The Fintek F71806F/FG Super-I/O chip is essentially the same as the
+F71872F/FG, and is undistinguishable therefrom.
+
 The driver assumes that no more than one chip is present, which seems
 reasonable.
 

Documentation/hwmon/it87

@@ -90,7 +90,8 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you
 can't have both on a given board.
 
 The IT8716F, IT8718F and later IT8712F revisions have support for
-2 additional fans. They are not yet supported by the driver.
+2 additional fans. They are supported by the driver for the IT8716F and
+IT8718F but not for the IT8712F
 
 The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
 16-bit tachometer counters for fans 1 to 3. This is better (no more fan

Documentation/hwmon/lm78

@@ -56,16 +56,6 @@ should work with. This is hardcoded by the mainboard and/or processor itself.
 It is a value in volts. When it is unconnected, you will often find the
 value 3.50 V here.
 
-In addition to the alarms described above, there are a couple of additional
-ones. There is a BTI alarm, which gets triggered when an external chip has
-crossed its limits. Usually, this is connected to all LM75 chips; if at
-least one crosses its limits, this bit gets set. The CHAS alarm triggers
-if your computer case is open. The FIFO alarms should never trigger; it
-indicates an internal error. The SMI_IN alarm indicates some other chip
-has triggered an SMI interrupt. As we do not use SMI interrupts at all,
-this condition usually indicates there is a problem with some other
-device.
-
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may
 already have disappeared! Note that in the current implementation, all

Documentation/hwmon/lm93

@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: I2C 0x2c-0x2e
     Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf
 
-Author:
+Authors:
 	Mark M. Hoffman <mhoffman@lightlink.com>
 	Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
 	Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
@@ -16,7 +16,6 @@ Author:
 Module Parameters
 -----------------
 
-(specific to LM93)
 * init: integer
   Set to non-zero to force some initializations (default is 0).
 * disable_block: integer
@@ -37,30 +36,13 @@ Module Parameters
   I.e. this parameter controls the VID pin input thresholds; if your VID
   inputs are not working, try changing this.  The default value is "0".
 
-(common among sensor drivers)
-* force: short array (min = 1, max = 48)
-  List of adapter,address pairs to assume to be present.  Autodetection
-  of the target device will still be attempted.  Use one of the more
-  specific force directives below if this doesn't detect the device.
-* force_lm93: short array (min = 1, max = 48)
-  List of adapter,address pairs which are unquestionably assumed to contain
-  a 'lm93' chip
-* ignore: short array (min = 1, max = 48)
-  List of adapter,address pairs not to scan
-* ignore_range: short array (min = 1, max = 48)
-  List of adapter,start-addr,end-addr triples not to scan
-* probe: short array (min = 1, max = 48)
-  List of adapter,address pairs to scan additionally
-* probe_range: short array (min = 1, max = 48)
-  List of adapter,start-addr,end-addr triples to scan additionally
-
 
 Hardware Description
 --------------------
 
 (from the datasheet)
 
-The LM93, hardware monitor, has a two wire digital interface compatible with
+The LM93 hardware monitor has a two wire digital interface compatible with
 SMBus 2.0. Using an 8-bit ADC, the LM93 measures the temperature of two remote
 diode connected transistors as well as its own die and 16 power supply
 voltages. To set fan speed, the LM93 has two PWM outputs that are each
@@ -69,18 +51,12 @@ table based. The LM93 includes a digital filter that can be invoked to smooth
 temperature readings for better control of fan speed. The LM93 has four
 tachometer inputs to measure fan speed. Limit and status registers for all
 measured values are included. The LM93 builds upon the functionality of
-previous motherboard management ASICs and uses some of the LM85 s features
+previous motherboard management ASICs and uses some of the LM85's features
 (i.e. smart tachometer mode). It also adds measurement and control support
 for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual
 processor Xeon class motherboard with a minimum of external components.
 
 
-Driver Description
-------------------
-
-This driver implements support for the National Semiconductor LM93.
-
-
 User Interface
 --------------
 
@@ -101,7 +77,7 @@ These intervals can be found in the sysfs files prochot1_interval and
 prochot2_interval.  The values in these files specify the intervals for
 #P1_PROCHOT and #P2_PROCHOT, respectively.  Selecting a value not in this
 list will cause the driver to use the next largest interval.  The available
-intervals are:
+intervals are (in seconds):
 
 #PROCHOT intervals: 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372
 
@@ -111,12 +87,12 @@ assert #P2_PROCHOT, and vice-versa.  This mode is enabled by writing a
 non-zero integer to the sysfs file prochot_short.
 
 The LM93 can also override the #PROCHOT pins by driving a PWM signal onto
-one or both of them.  When overridden, the signal has a period of 3.56 mS,
+one or both of them.  When overridden, the signal has a period of 3.56 ms,
 a minimum pulse width of 5 clocks (at 22.5kHz => 6.25% duty cycle), and
 a maximum pulse width of 80 clocks (at 22.5kHz => 99.88% duty cycle).
 
 The sysfs files prochot1_override and prochot2_override contain boolean
-intgers which enable or disable the override function for #P1_PROCHOT and
+integers which enable or disable the override function for #P1_PROCHOT and
 #P2_PROCHOT, respectively.  The sysfs file prochot_override_duty_cycle
 contains a value controlling the duty cycle for the PWM signal used when
 the override function is enabled.  This value ranges from 0 to 15, with 0
@@ -166,7 +142,7 @@ frequency values are constrained by the hardware.  Selecting a value which is
 not available will cause the driver to use the next largest value.  Also note
 that this parameter has implications for the Smart Tach Mode (see above).
 
-PWM Output Frequencies: 12, 36, 48, 60, 72, 84, 96, 22500 (h/w default)
+PWM Output Frequencies (in Hz): 12, 36, 48, 60, 72, 84, 96, 22500 (default)
 
 Automatic PWM:
 
@@ -178,7 +154,7 @@ individual control sources to which the PWM output is bound.
 The eight control sources are: temp1-temp4 (aka "zones" in the datasheet),
 #PROCHOT 1 & 2, and #VRDHOT 1 & 2.  The bindings are expressed as a bitmask
 in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
- a "0" disables it. The h/w default is 0x0f (all temperatures bound).
+a "0" disables it. The h/w default is 0x0f (all temperatures bound).
 
 	0x01 - Temp 1
 	0x02 - Temp 2
@@ -324,89 +300,3 @@ LM93 Unique sysfs Files
 
 	gpio			input state of 8 GPIO pins; read-only
 
-
-Sample Configuration File
--------------------------
-
-Here is a sample LM93 chip config for sensors.conf:
-
----------- cut here ----------
-chip "lm93-*"
-
-# VOLTAGE INPUTS
-
-	# labels and scaling based on datasheet recommendations
-	label in1	"+12V1"
-	compute in1	@ * 12.945, @ / 12.945
-	set in1_min	12 * 0.90
-	set in1_max	12 * 1.10
-
-	label in2	"+12V2"
-	compute in2	@ * 12.945, @ / 12.945
-	set in2_min	12 * 0.90
-	set in2_max	12 * 1.10
-
-	label in3	"+12V3"
-	compute in3	@ * 12.945, @ / 12.945
-	set in3_min	12 * 0.90
-	set in3_max	12 * 1.10
-
-	label in4	"FSB_Vtt"
-
-	label in5	"3GIO"
-
-	label in6	"ICH_Core"
-
-	label in7	"Vccp1"
-
-	label in8	"Vccp2"
-
-	label in9	"+3.3V"
-	set in9_min	3.3 * 0.90
-	set in9_max	3.3 * 1.10
-
-	label in10	"+5V"
-	set in10_min	5.0 * 0.90
-	set in10_max	5.0 * 1.10
-
-	label in11	"SCSI_Core"
-
-	label in12	"Mem_Core"
-
-	label in13	"Mem_Vtt"
-
-	label in14	"Gbit_Core"
-
-	# Assuming R1/R2 = 4.1143, and 3.3V reference
-	# -12V = (4.1143 + 1) * (@ - 3.3) + 3.3
-	label in15	"-12V"
-	compute in15 @ * 5.1143 - 13.57719, (@ + 13.57719) / 5.1143
-	set in15_min	-12 * 0.90
-	set in15_max	-12 * 1.10
-
-	label in16	"+3.3VSB"
-	set in16_min	3.3 * 0.90
-	set in16_max	3.3 * 1.10
-
-# TEMPERATURE INPUTS
-
-	label temp1	"CPU1"
-	label temp2	"CPU2"
-	label temp3	"LM93"
-
-# TACHOMETER INPUTS
-
-	label fan1	"Fan1"
-	set fan1_min	3000
-	label fan2	"Fan2"
-	set fan2_min	3000
-	label fan3	"Fan3"
-	set fan3_min	3000
-	label fan4	"Fan4"
-	set fan4_min	3000
-
-# PWM OUTPUTS
-
-	label pwm1	"CPU1"
-	label pwm2	"CPU2"
-

Documentation/hwmon/sysfs-interface

@@ -67,6 +67,10 @@ between readings to be caught and alarmed. The exact definition of an
 alarm (for example, whether a threshold must be met or must be exceeded
 to cause an alarm) is chip-dependent.
 
+When setting values of hwmon sysfs attributes, the string representation of
+the desired value must be written, note that strings which are not a number
+are interpreted as 0! For more on how written strings are interpreted see the
+"sysfs attribute writes interpretation" section at the end of this file.
 
 -------------------------------------------------------------------------
 
@@ -78,8 +82,21 @@ RW	read/write value
 Read/write values may be read-only for some chips, depending on the
 hardware implementation.
 
-All entries are optional, and should only be created in a given driver
-if the chip has the feature.
+All entries (except name) are optional, and should only be created in a
+given driver if the chip has the feature.
+
+
+********
+* Name *
+********
+
+name		The chip name.
+		This should be a short, lowercase string, not containing
+		spaces nor dashes, representing the chip name. This is
+		the only mandatory attribute.
+		I2C devices get this attribute created automatically.
+		RO
+
 
 ************
 * Voltages *
@@ -104,18 +121,17 @@ in[0-*]_input	Voltage input value.
 		by the chip driver, and must be done by the application.
 		However, some drivers (notably lm87 and via686a)
 		do scale, because of internal resistors built into a chip.
-		These drivers will output the actual voltage.
-
-		Typical usage:
-			in0_*	CPU #1 voltage (not scaled)
-			in1_*	CPU #2 voltage (not scaled)
-			in2_*	3.3V nominal (not scaled)
-			in3_*	5.0V nominal (scaled)
-			in4_*	12.0V nominal (scaled)
-			in5_*	-12.0V nominal (scaled)
-			in6_*	-5.0V nominal (scaled)
-			in7_*	varies
-			in8_*	varies
+		These drivers will output the actual voltage. Rule of
+		thumb: drivers should report the voltage values at the
+		"pins" of the chip.
+
+in[0-*]_label	Suggested voltage channel label.
+		Text string
+		Should only be created if the driver has hints about what
+		this voltage channel is being used for, and user-space
+		doesn't. In all other cases, the label is provided by
+		user-space.
+		RO
 
 cpu[0-*]_vid	CPU core reference voltage.
 		Unit: millivolt
@@ -159,6 +175,13 @@ fan[1-*]_target
 		Only makes sense if the chip supports closed-loop fan speed
 		control based on the measured fan speed.
 
+fan[1-*]_label	Suggested fan channel label.
+		Text string
+		Should only be created if the driver has hints about what
+		this fan channel is being used for, and user-space doesn't.
+		In all other cases, the label is provided by user-space.
+		RO
+
 Also see the Alarms section for status flags associated with fans.
 
 
@@ -219,12 +242,12 @@ temp[1-*]_auto_point[1-*]_temp_hyst
 ****************
 
 temp[1-*]_type	Sensor type selection.
-		Integers 1 to 6 or thermistor Beta value (typically 3435)
+		Integers 1 to 6
 		RW
 		1: PII/Celeron Diode
 		2: 3904 transistor
 		3: thermal diode
-		4: thermistor (default/unknown Beta)
+		4: thermistor
 		5: AMD AMDSI
 		6: Intel PECI
 		Not all types are supported by all chips
@@ -260,18 +283,19 @@ temp[1-*]_crit_hyst
 		from the critical value.
 		RW
 
-temp[1-4]_offset
+temp[1-*]_offset
 		Temperature offset which is added to the temperature reading
 		by the chip.
 		Unit: millidegree Celsius
 		Read/Write value.
 
-		If there are multiple temperature sensors, temp1_* is
-		generally the sensor inside the chip itself,
-		reported as "motherboard temperature".  temp2_* to
-		temp4_* are generally sensors external to the chip
-		itself, for example the thermal diode inside the CPU or
-		a thermistor nearby.
+temp[1-*]_label	Suggested temperature channel label.
+		Text string
+		Should only be created if the driver has hints about what
+		this temperature channel is being used for, and user-space
+		doesn't. In all other cases, the label is provided by
+		user-space.
+		RO
 
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
@@ -393,14 +417,53 @@ beep_mask	Bitmask for beep.
 		RW
 
 
-*********
-* Other *
-*********
-
-eeprom		Raw EEPROM data in binary form.
-		RO
-
-pec		Enable or disable PEC (SMBus only)
-		0: disable
-		1: enable
-		RW
+sysfs attribute writes interpretation
+-------------------------------------
+
+hwmon sysfs attributes always contain numbers, so the first thing to do is to
+convert the input to a number, there are 2 ways todo this depending whether
+the number can be negative or not:
+unsigned long u = simple_strtoul(buf, NULL, 10);
+long s = simple_strtol(buf, NULL, 10);
+
+With buf being the buffer with the user input being passed by the kernel.
+Notice that we do not use the second argument of strto[u]l, and thus cannot
+tell when 0 is returned, if this was really 0 or is caused by invalid input.
+This is done deliberately as checking this everywhere would add a lot of
+code to the kernel.
+
+Notice that it is important to always store the converted value in an
+unsigned long or long, so that no wrap around can happen before any further
+checking.
+
+After the input string is converted to an (unsigned) long, the value should be
+checked if its acceptable. Be careful with further conversions on the value
+before checking it for validity, as these conversions could still cause a wrap
+around before the check. For example do not multiply the result, and only
+add/subtract if it has been divided before the add/subtract.
+
+What to do if a value is found to be invalid, depends on the type of the
+sysfs attribute that is being set. If it is a continuous setting like a
+tempX_max or inX_max attribute, then the value should be clamped to its
+limits using SENSORS_LIMIT(value, min_limit, max_limit). If it is not
+continuous like for example a tempX_type, then when an invalid value is
+written, -EINVAL should be returned.
+
+Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees):
+
+	long v = simple_strtol(buf, NULL, 10) / 1000;
+	v = SENSORS_LIMIT(v, -128, 127);
+	/* write v to register */
+
+Example2, fan divider setting, valid values 2, 4 and 8:
+
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	switch (v) {
+	case 2: v = 1; break;
+	case 4: v = 2; break;
+	case 8: v = 3; break;
+	default:
+		return -EINVAL;
+	}
+	/* write v to register */

Documentation/hwmon/w83791d

@@ -75,46 +75,64 @@ Voltage sensors (also known as IN sensors) report their values in millivolts.
 An alarm is triggered if the voltage has crossed a programmable minimum
 or maximum limit.
 
-The bit ordering for the alarm "realtime status register" and the
-"beep enable registers" are different.
-
-in0 (VCORE)  :  alarms: 0x000001 beep_enable: 0x000001
-in1 (VINR0)  :  alarms: 0x000002 beep_enable: 0x002000 <== mismatch
-in2 (+3.3VIN):  alarms: 0x000004 beep_enable: 0x000004
-in3 (5VDD)   :  alarms: 0x000008 beep_enable: 0x000008
-in4 (+12VIN) :  alarms: 0x000100 beep_enable: 0x000100
-in5 (-12VIN) :  alarms: 0x000200 beep_enable: 0x000200
-in6 (-5VIN)  :  alarms: 0x000400 beep_enable: 0x000400
-in7 (VSB)    :  alarms: 0x080000 beep_enable: 0x010000 <== mismatch
-in8 (VBAT)   :  alarms: 0x100000 beep_enable: 0x020000 <== mismatch
-in9 (VINR1)  :  alarms: 0x004000 beep_enable: 0x004000
-temp1        :  alarms: 0x000010 beep_enable: 0x000010
-temp2        :  alarms: 0x000020 beep_enable: 0x000020
-temp3        :  alarms: 0x002000 beep_enable: 0x000002 <== mismatch
-fan1         :  alarms: 0x000040 beep_enable: 0x000040
-fan2         :  alarms: 0x000080 beep_enable: 0x000080
-fan3         :  alarms: 0x000800 beep_enable: 0x000800
-fan4         :  alarms: 0x200000 beep_enable: 0x200000
-fan5         :  alarms: 0x400000 beep_enable: 0x400000
-tart1        :  alarms: 0x010000 beep_enable: 0x040000 <== mismatch
-tart2        :  alarms: 0x020000 beep_enable: 0x080000 <== mismatch
-tart3        :  alarms: 0x040000 beep_enable: 0x100000 <== mismatch
-case_open    :  alarms: 0x001000 beep_enable: 0x001000
-user_enable  :  alarms: -------- beep_enable: 0x800000
-
-*** NOTE: It is the responsibility of user-space code to handle the fact
-that the beep enable and alarm bits are in different positions when using that
-feature of the chip.
-
-When an alarm goes off, you can be warned by a beeping signal through your
-computer speaker. It is possible to enable all beeping globally, or only
-the beeping for some alarms.
-
-The driver only reads the chip values each 3 seconds; reading them more
-often will do no harm, but will return 'old' values.
+The w83791d has a global bit used to enable beeping from the speaker when an
+alarm is triggered as well as a bitmask to enable or disable the beep for
+specific alarms. You need both the global beep enable bit and the
+corresponding beep bit to be on for a triggered alarm to sound a beep.
+
+The sysfs interface to the gloabal enable is via the sysfs beep_enable file.
+This file is used for both legacy and new code.
+
+The sysfs interface to the beep bitmask has migrated from the original legacy
+method of a single sysfs beep_mask file to a newer method using multiple
+*_beep files as described in .../Documentation/hwmon/sysfs-interface.
+
+A similar change has occured for the bitmap corresponding to the alarms. The
+original legacy method used a single sysfs alarms file containing a bitmap
+of triggered alarms. The newer method uses multiple sysfs *_alarm files
+(again following the pattern described in sysfs-interface).
+
+Since both methods read and write the underlying hardware, they can be used
+interchangeably and changes in one will automatically be reflected by
+the other. If you use the legacy bitmask method, your user-space code is
+responsible for handling the fact that the alarms and beep_mask bitmaps
+are not the same (see the table below).
+
+NOTE: All new code should be written to use the newer sysfs-interface
+specification as that avoids bitmap problems and is the preferred interface
+going forward.
+
+The driver reads the hardware chip values at most once every three seconds.
+User mode code requesting values more often will receive cached values.
+
+Alarms bitmap vs. beep_mask bitmask
+------------------------------------
+For legacy code using the alarms and beep_mask files:
+
+in0 (VCORE)  :  alarms: 0x000001 beep_mask: 0x000001
+in1 (VINR0)  :  alarms: 0x000002 beep_mask: 0x002000 <== mismatch
+in2 (+3.3VIN):  alarms: 0x000004 beep_mask: 0x000004
+in3 (5VDD)   :  alarms: 0x000008 beep_mask: 0x000008
+in4 (+12VIN) :  alarms: 0x000100 beep_mask: 0x000100
+in5 (-12VIN) :  alarms: 0x000200 beep_mask: 0x000200
+in6 (-5VIN)  :  alarms: 0x000400 beep_mask: 0x000400
+in7 (VSB)    :  alarms: 0x080000 beep_mask: 0x010000 <== mismatch
+in8 (VBAT)   :  alarms: 0x100000 beep_mask: 0x020000 <== mismatch
+in9 (VINR1)  :  alarms: 0x004000 beep_mask: 0x004000
+temp1        :  alarms: 0x000010 beep_mask: 0x000010
+temp2        :  alarms: 0x000020 beep_mask: 0x000020
+temp3        :  alarms: 0x002000 beep_mask: 0x000002 <== mismatch
+fan1         :  alarms: 0x000040 beep_mask: 0x000040
+fan2         :  alarms: 0x000080 beep_mask: 0x000080
+fan3         :  alarms: 0x000800 beep_mask: 0x000800
+fan4         :  alarms: 0x200000 beep_mask: 0x200000
+fan5         :  alarms: 0x400000 beep_mask: 0x400000
+tart1        :  alarms: 0x010000 beep_mask: 0x040000 <== mismatch
+tart2        :  alarms: 0x020000 beep_mask: 0x080000 <== mismatch
+tart3        :  alarms: 0x040000 beep_mask: 0x100000 <== mismatch
+case_open    :  alarms: 0x001000 beep_mask: 0x001000
+global_enable:  alarms: -------- beep_mask: 0x800000 (modified via beep_enable)
 
 W83791D TODO:
 ---------------
-Provide a patch for per-file alarms and beep enables as defined in the hwmon
-	documentation (Documentation/hwmon/sysfs-interface)
 Provide a patch for smart-fan control (still need appropriate motherboard/fans)

MAINTAINERS

@@ -1660,7 +1660,8 @@ P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git
+T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing
+T:	git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release
 S:	Maintained
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
@@ -4177,7 +4178,7 @@ W83791D HARDWARE MONITORING DRIVER
 P:	Charles Spirakis
 M:	bezaur@gmail.com
 L:	lm-sensors@lm-sensors.org
-S:	Maintained
+S:	Odd Fixes
 
 W83793 HARDWARE MONITORING DRIVER
 P:	Rudolf Marek

drivers/hwmon/Kconfig

@@ -30,7 +30,7 @@ config HWMON_VID
 
 config SENSORS_ABITUGURU
 	tristate "Abit uGuru (rev 1 & 2)"
-	depends on EXPERIMENTAL
+	depends on X86 && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the sensor part of the first
 	  and second revision of the Abit uGuru chip. The voltage and frequency
@@ -45,7 +45,7 @@ config SENSORS_ABITUGURU
 
 config SENSORS_ABITUGURU3
 	tristate "Abit uGuru (rev 3)"
-	depends on HWMON && EXPERIMENTAL
+	depends on X86 && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the sensor part of the
 	  third revision of the Abit uGuru chip. Only reading the sensors
@@ -133,6 +133,16 @@ config SENSORS_ADM9240
 	  This driver can also be built as a module.  If so, the module
 	  will be called adm9240.
 
+config SENSORS_ADT7470
+	tristate "Analog Devices ADT7470"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7470 temperature monitoring chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called adt7470.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
@@ -172,7 +182,7 @@ config SENSORS_AMS_I2C
 
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
-	depends on I2C && EXPERIMENTAL
+	depends on X86 && I2C && EXPERIMENTAL
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the ASB100 Bach sensor
@@ -206,19 +216,39 @@ config SENSORS_DS1621
 	  will be called ds1621.
 
 config SENSORS_F71805F
-	tristate "Fintek F71805F/FG and F71872F/FG"
+	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71805F/FG and F71872F/FG Super-I/O
-	  chips.
+	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+	  Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called f71805f.
 
+config SENSORS_F71882FG
+	tristate "Fintek F71882FG and F71883FG"
+	depends on EXPERIMENTAL
+	help
+	  If you say yes here you get support for hardware monitoring
+	  features of the Fintek F71882FG and F71883FG Super-I/O chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called f71882fg.
+
+config SENSORS_F75375S
+	tristate "Fintek F75375S/SP and F75373";
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for hardware monitoring
+	  features of the Fintek F75375S/SP and F75373
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called f75375s.
+
 config SENSORS_FSCHER
 	tristate "FSC Hermes"
-	depends on I2C
+	depends on X86 && I2C
 	help
 	  If you say yes here you get support for Fujitsu Siemens
 	  Computers Hermes sensor chips.
@@ -228,7 +258,7 @@ config SENSORS_FSCHER
 
 config SENSORS_FSCPOS
 	tristate "FSC Poseidon"
-	depends on I2C
+	depends on X86 && I2C
 	help
 	  If you say yes here you get support for Fujitsu Siemens
 	  Computers Poseidon sensor chips.
@@ -236,6 +266,20 @@ config SENSORS_FSCPOS
 	  This driver can also be built as a module.  If so, the module
 	  will be called fscpos.
 
+config SENSORS_FSCHMD
+	tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+	depends on X86 && I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for various Fujitsu Siemens
+	  Computers sensor chips.
+
+	  This is a new merged driver for FSC sensor chips which is intended
+	  as a replacment for the fscpos, fscscy and fscher drivers and adds
+	  support for several other FCS sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called fschmd.
+
 config SENSORS_GL518SM
 	tristate "Genesys Logic GL518SM"
 	depends on I2C
@@ -265,6 +309,19 @@ config SENSORS_CORETEMP
 	  sensor inside your CPU. Supported all are all known variants
 	  of Intel Core family.
 
+config SENSORS_IBMPEX
+	tristate "IBM PowerExecutive temperature/power sensors"
+	select IPMI_SI
+	depends on IPMI_HANDLER
+	help
+	  If you say yes here you get support for the temperature and
+	  power sensors in various IBM System X servers that support
+	  PowerExecutive.  So far this includes the x3550, x3650, x3655,
+	  x3755, and certain HS20 blades.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ibmpex.
+
 config SENSORS_IT87
 	tristate "ITE IT87xx and compatibles"
 	select HWMON_VID
@@ -401,7 +458,7 @@ config SENSORS_LM92
 
 config SENSORS_LM93
 	tristate "National Semiconductor LM93 and compatibles"
-	depends on HWMON && I2C
+	depends on I2C
 	select HWMON_VID
 	help
 	  If you say yes here you get support for National Semiconductor LM93
@@ -466,13 +523,13 @@ config SENSORS_SIS5595
 	  will be called sis5595.
 
 config SENSORS_DME1737
-	tristate "SMSC DME1737 and compatibles"
+	tristate "SMSC DME1737, SCH311x and compatibles"
 	depends on I2C && EXPERIMENTAL
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the hardware monitoring
 	  and fan control features of the SMSC DME1737 (and compatibles
-	  like the Asus A8000) Super-I/O chip.
+	  like the Asus A8000) and SCH311x Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called dme1737.

drivers/hwmon/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
 obj-$(CONFIG_SENSORS_ADM1029)	+= adm1029.o
 obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
+obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
@@ -29,11 +30,15 @@ obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
+obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
+obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
 obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
+obj-$(CONFIG_SENSORS_FSCHMD)	+= fschmd.o
 obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
 obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
+obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
 obj-$(CONFIG_SENSORS_LM63)	+= lm63.o

drivers/hwmon/abituguru.c

@@ -176,7 +176,7 @@ MODULE_PARM_DESC(verbose, "How verbose should the driver be? (0-3):\n"
    The structure is dynamically allocated, at the same time when a new
    abituguru device is allocated. */
 struct abituguru_data {
-	struct class_device *class_dev; /* hwmon registered device */
+	struct device *hwmon_dev;	/* hwmon registered device */
 	struct mutex update_lock;	/* protect access to data and uGuru */
 	unsigned long last_updated;	/* In jiffies */
 	unsigned short addr;		/* uguru base address */
@@ -1287,11 +1287,11 @@ static int __devinit abituguru_probe(struct platform_device *pdev)
 				&abituguru_sysfs_attr[i].dev_attr))
 			goto abituguru_probe_error;
 
-	data->class_dev = hwmon_device_register(&pdev->dev);
-	if (!IS_ERR(data->class_dev))
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (!IS_ERR(data->hwmon_dev))
 		return 0; /* success */
 
-	res = PTR_ERR(data->class_dev);
+	res = PTR_ERR(data->hwmon_dev);
 abituguru_probe_error:
 	for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
 		device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
@@ -1308,7 +1308,7 @@ static int __devexit abituguru_remove(struct platform_device *pdev)
 	int i;
 	struct abituguru_data *data = platform_get_drvdata(pdev);
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
 		device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
 	for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++)

drivers/hwmon/abituguru3.c

@@ -124,7 +124,7 @@ struct abituguru3_motherboard_info {
    The structure is dynamically allocated, at the same time when a new
    abituguru3 device is allocated. */
 struct abituguru3_data {
-	struct class_device *class_dev; /* hwmon registered device */
+	struct device *hwmon_dev;	/* hwmon registered device */
 	struct mutex update_lock;	/* protect access to data and uGuru */
 	unsigned short addr;		/* uguru base address */
 	char valid;			/* !=0 if following fields are valid */
@@ -933,9 +933,9 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 				&abituguru3_sysfs_attr[i].dev_attr))
 			goto abituguru3_probe_error;
 
-	data->class_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->class_dev)) {
-		res = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		res = PTR_ERR(data->hwmon_dev);
 		goto abituguru3_probe_error;
 	}
 
@@ -957,7 +957,7 @@ static int __devexit abituguru3_remove(struct platform_device *pdev)
 	struct abituguru3_data *data = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
 		device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
 	for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)

drivers/hwmon/ad7418.c

@@ -47,7 +47,7 @@ static const u8 AD7418_REG_TEMP[] = { AD7418_REG_TEMP_IN,
 
 struct ad7418_data {
 	struct i2c_client	client;
-	struct class_device	*class_dev;
+	struct device		*hwmon_dev;
 	struct attribute_group	attrs;
 	enum chips		type;
 	struct mutex		lock;
@@ -172,7 +172,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct i2c_client *client = to_i2c_client(dev);
 	struct ad7418_data *data = i2c_get_clientdata(client);
-	int temp = simple_strtol(buf, NULL, 10);
+	long temp = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->lock);
 	data->temp[attr->index] = LM75_TEMP_TO_REG(temp);
@@ -326,9 +326,9 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove;
 	}
 
@@ -347,7 +347,7 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
 static int ad7418_detach_client(struct i2c_client *client)
 {
 	struct ad7418_data *data = i2c_get_clientdata(client);
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &data->attrs);
 	i2c_detach_client(client);
 	kfree(data);

drivers/hwmon/adm1025.c

@@ -133,7 +133,7 @@ static struct i2c_driver adm1025_driver = {
 
 struct adm1025_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
@@ -292,7 +292,7 @@ static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
 
 static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct adm1025_data *data = adm1025_update_device(dev);
+	struct adm1025_data *data = dev_get_drvdata(dev);
 	return sprintf(buf, "%u\n", data->vrm);
 }
 static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
@@ -472,9 +472,9 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 			goto exit_remove;
 	}
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove;
 	}
 
@@ -538,7 +538,7 @@ static int adm1025_detach_client(struct i2c_client *client)
 	struct adm1025_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group_opt);
 

drivers/hwmon/adm1026.c

@@ -260,7 +260,7 @@ struct pwm_data {
 
 struct adm1026_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	enum chips type;
 
 	struct mutex update_lock;
@@ -1221,7 +1221,7 @@ static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
 static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct adm1026_data *data = adm1026_update_device(dev);
+	struct adm1026_data *data = dev_get_drvdata(dev);
 	return sprintf(buf,"%d\n", data->vrm);
 }
 static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
@@ -1676,9 +1676,9 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1026_group)))
 		goto exitdetach;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exitremove;
 	}
 
@@ -1698,7 +1698,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
 static int adm1026_detach_client(struct i2c_client *client)
 {
 	struct adm1026_data *data = i2c_get_clientdata(client);
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1026_group);
 	i2c_detach_client(client);
 	kfree(data);

drivers/hwmon/adm1029.c

@@ -141,7 +141,7 @@ static struct i2c_driver adm1029_driver = {
 
 struct adm1029_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;		/* zero until following fields are valid */
 	unsigned long last_updated;	/* in jiffies */
@@ -391,9 +391,9 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
 	}
 
@@ -431,7 +431,7 @@ static int adm1029_detach_client(struct i2c_client *client)
 	struct adm1029_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 
 	if ((err = i2c_detach_client(client)))

drivers/hwmon/adm1031.c

@@ -70,7 +70,7 @@ typedef u8 auto_chan_table_t[8][2];
 /* Each client has this additional data */
 struct adm1031_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	int chip_type;
 	char valid;		/* !=0 if following fields are valid */
@@ -853,9 +853,9 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
 			goto exit_remove;
 	}
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove;
 	}
 
@@ -877,7 +877,7 @@ static int adm1031_detach_client(struct i2c_client *client)
 	struct adm1031_data *data = i2c_get_clientdata(client);
 	int ret;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
 	if ((ret = i2c_detach_client(client)) != 0) {

drivers/hwmon/adm9240.c

@@ -150,7 +150,7 @@ static struct i2c_driver adm9240_driver = {
 struct adm9240_data {
 	enum chips type;
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;
 	unsigned long last_updated_measure;
@@ -590,9 +590,9 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove;
 	}
 
@@ -620,7 +620,7 @@ static int adm9240_detach_client(struct i2c_client *client)
 	struct adm9240_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm9240_group);
 
 	if ((err = i2c_detach_client(client)))

drivers/hwmon/applesmc.c

@@ -127,7 +127,7 @@ static s16 rest_x;
 static s16 rest_y;
 static struct timer_list applesmc_timer;
 static struct input_dev *applesmc_idev;
-static struct class_device *hwmon_class_dev;
+static struct device *hwmon_dev;
 
 /* Indicates whether this computer has an accelerometer. */
 static unsigned int applesmc_accelerometer;
@@ -1287,9 +1287,9 @@ static int __init applesmc_init(void)
 			goto out_light_wq;
 	}
 
-	hwmon_class_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(hwmon_class_dev)) {
-		ret = PTR_ERR(hwmon_class_dev);
+	hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon_dev)) {
+		ret = PTR_ERR(hwmon_dev);
 		goto out_light_ledclass;
 	}
 
@@ -1331,7 +1331,7 @@ static int __init applesmc_init(void)
 
 static void __exit applesmc_exit(void)
 {
-	hwmon_device_unregister(hwmon_class_dev);
+	hwmon_device_unregister(hwmon_dev);
 	if (applesmc_light) {
 		led_classdev_unregister(&applesmc_backlight);
 		destroy_workqueue(applesmc_led_wq);

drivers/hwmon/asb100.c

@@ -143,7 +143,7 @@ static int FAN_FROM_REG(u8 val, int div)
 
 /* TEMP: 0.001C/bit (-128C to +127C)
    REG: 1C/bit, two's complement */
-static u8 TEMP_TO_REG(int temp)
+static u8 TEMP_TO_REG(long temp)
 {
 	int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
 	ntemp += (ntemp<0 ? -500 : 500);
@@ -182,7 +182,7 @@ static u8 DIV_TO_REG(long val)
    dynamically allocated, at the same time the client itself is allocated. */
 struct asb100_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex lock;
 	enum chips type;
 
@@ -448,7 +448,7 @@ static ssize_t set_##reg(struct device *dev, const char *buf, \
 { \
 	struct i2c_client *client = to_i2c_client(dev); \
 	struct asb100_data *data = i2c_get_clientdata(client); \
-	unsigned long val = simple_strtoul(buf, NULL, 10); \
+	long val = simple_strtol(buf, NULL, 10); \
  \
 	mutex_lock(&data->update_lock); \
 	switch (nr) { \
@@ -514,7 +514,7 @@ static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
 /* VRM */
 static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct asb100_data *data = asb100_update_device(dev);
+	struct asb100_data *data = dev_get_drvdata(dev);
 	return sprintf(buf, "%d\n", data->vrm);
 }
 
@@ -844,9 +844,9 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &asb100_group)))
 		goto ERROR3;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto ERROR4;
 	}
 
@@ -874,7 +874,7 @@ static int asb100_detach_client(struct i2c_client *client)
 
 	/* main client */
 	if (data) {
-		hwmon_device_unregister(data->class_dev);
+		hwmon_device_unregister(data->hwmon_dev);
 		sysfs_remove_group(&client->dev.kobj, &asb100_group);
 	}
 

drivers/hwmon/atxp1.c

@@ -61,7 +61,7 @@ static struct i2c_driver atxp1_driver = {
 
 struct atxp1_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	unsigned long last_updated;
 	u8 valid;
@@ -335,9 +335,9 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
 	}
 
@@ -361,7 +361,7 @@ static int atxp1_detach_client(struct i2c_client * client)
 	struct atxp1_data * data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &atxp1_group);
 
 	err = i2c_detach_client(client);

drivers/hwmon/coretemp.c

@@ -47,7 +47,7 @@ typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_LABEL, SHOW_NAME } SHOW;
 static struct coretemp_data *coretemp_update_device(struct device *dev);
 
 struct coretemp_data {
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	const char *name;
 	u32 id;
@@ -58,8 +58,6 @@ struct coretemp_data {
 	u8 alarm;
 };
 
-static struct coretemp_data *coretemp_update_device(struct device *dev);
-
 /*
  * Sysfs stuff
  */
@@ -228,9 +226,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group)))
 		goto exit_free;
 
-	data->class_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		dev_err(&pdev->dev, "Class registration failed (%d)\n",
 			err);
 		goto exit_class;
@@ -250,7 +248,7 @@ static int __devexit coretemp_remove(struct platform_device *pdev)
 {
 	struct coretemp_data *data = platform_get_drvdata(pdev);
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -350,7 +348,7 @@ static int coretemp_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata coretemp_cpu_notifier = {
+static struct notifier_block coretemp_cpu_notifier = {
 	.notifier_call = coretemp_cpu_callback,
 };
 #endif				/* !CONFIG_HOTPLUG_CPU */
@@ -371,9 +369,10 @@ static int __init coretemp_init(void)
 	for_each_online_cpu(i) {
 		struct cpuinfo_x86 *c = &(cpu_data)[i];
 
-		/* check if family 6, models e, f */
+		/* check if family 6, models e, f, 16 */
 		if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
-		    !((c->x86_model == 0xe) || (c->x86_model == 0xf))) {
+		    !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
+			(c->x86_model == 0x16))) {
 
 			/* supported CPU not found, but report the unknown
 			   family 6 CPU */

drivers/hwmon/ds1621.c

@@ -73,7 +73,7 @@ static const u8 DS1621_REG_TEMP[3] = {
 /* Each client has this additional data */
 struct ds1621_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;			/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -151,7 +151,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	struct i2c_client *client = to_i2c_client(dev);
 	struct ds1621_data *data = ds1621_update_client(dev);
-	u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));
+	u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
 
 	mutex_lock(&data->update_lock);
 	data->temp[attr->index] = val;
@@ -266,9 +266,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
 	if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
 	}
 
@@ -289,7 +289,7 @@ static int ds1621_detach_client(struct i2c_client *client)
 	struct ds1621_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &ds1621_group);
 
 	if ((err = i2c_detach_client(client)))

drivers/hwmon/f71805f.c

@@ -10,6 +10,9 @@
  * The F71872F/FG is almost the same, with two more voltages monitored,
  * and 6 VID inputs.
  *
+ * The F71806F/FG is essentially the same as the F71872F/FG. It even has
+ * the same chip ID, so the driver can't differentiate between.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -159,7 +162,7 @@ struct f71805f_auto_point {
 struct f71805f_data {
 	unsigned short addr;
 	const char *name;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
@@ -1378,9 +1381,9 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 		}
 	}
 
-	data->class_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
 		goto exit_remove_files;
 	}
@@ -1407,7 +1410,7 @@ static int __devexit f71805f_remove(struct platform_device *pdev)
 	struct resource *res;
 	int i;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
 	for (i = 0; i < 4; i++)
 		sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
@@ -1485,7 +1488,7 @@ static int __init f71805f_find(int sioaddr, unsigned short *address,
 
 	static const char *names[] = {
 		"F71805F/FG",
-		"F71872F/FG",
+		"F71872F/FG or F71806F/FG",
 	};
 
 	superio_enter(sioaddr);

drivers/hwmon/fscher.c

@@ -134,7 +134,7 @@ static struct i2c_driver fscher_driver = {
 
 struct fscher_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
@@ -344,9 +344,9 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
 	}
 
@@ -367,7 +367,7 @@ static int fscher_detach_client(struct i2c_client *client)
 	struct fscher_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &fscher_group);
 
 	if ((err = i2c_detach_client(client)))

drivers/hwmon/fscpos.c

@@ -115,7 +115,7 @@ static struct i2c_driver fscpos_driver = {
  */
 struct fscpos_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; 		/* 0 until following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -539,9 +539,9 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
 	}
 
@@ -562,7 +562,7 @@ static int fscpos_detach_client(struct i2c_client *client)
 	struct fscpos_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &fscpos_group);
 
 	if ((err = i2c_detach_client(client)))

drivers/hwmon/gl518sm.c

@@ -119,7 +119,7 @@ static inline u8 FAN_TO_REG(long rpm, int div)
 /* Each client has this additional data */
 struct gl518_data {
 	struct i2c_client client;
-	struct class_device *class_dev;
+	struct device *hwmon_dev;
 	enum chips type;
 
 	struct mutex update_lock;
@@ -460,9 +460,9 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = sysfs_create_group(&new_client->dev.kobj, &gl518_group)))
 		goto exit_detach;
 
-	data->class_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->class_dev)) {
-		err = PTR_ERR(data->class_dev);
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
 	}
 
@@ -502,7 +502,7 @@ static int gl518_detach_client(struct i2c_client *client)
 	struct gl518_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->class_dev);
+	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &gl518_group);
 
 	if ((err = i2c_detach_client(client)))

drivers/hwmon/lm75.h

@@ -33,7 +33,7 @@
 
 /* TEMP: 0.001C/bit (-55C to +125C)
    REG: (0.5C/bit, two's complement) << 7 */
-static inline u16 LM75_TEMP_TO_REG(int temp)
+static inline u16 LM75_TEMP_TO_REG(long temp)
 {
 	int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
 	ntemp += (ntemp<0 ? -250 : 250);

drivers/misc/thinkpad_acpi.c

@@ -517,7 +517,7 @@ static char *next_cmd(char **cmds)
  ****************************************************************************/
 
 static struct platform_device *tpacpi_pdev;
-static struct class_device *tpacpi_hwmon;
+static struct device *tpacpi_hwmon;
 static struct input_dev *tpacpi_inputdev;