wifi: ath9k: reset survey of current channel after a scan started

In the `ath_set_channel()` function, we only reset surveys that are not
from the current channel. This leads to the accumulation of survey data for
the current channel indefinitely. This may not be the most optimal
approach, as we want the ACS to rely on the most recent survey.
So reset the survey data for the current channel at the start of each scan.
Signed-off-by: Hancheng Yang <hyang@freebox.fr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231205170623.3029689-1-hyang@freebox.fr

drivers/net/wireless/ath/ath9k/main.c

@@ -2383,7 +2383,22 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw,
 {
 	struct ath_softc *sc = hw->priv;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct cfg80211_chan_def *chandef = &sc->cur_chan->chandef;
+	struct ieee80211_channel *chan = chandef->chan;
+	int pos = chan->hw_value;
 	set_bit(ATH_OP_SCANNING, &common->op_flags);
+
+	/* Reset current survey */
+	if (!sc->cur_chan->offchannel) {
+		if (sc->cur_survey != &sc->survey[pos]) {
+			if (sc->cur_survey)
+				sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
+			sc->cur_survey = &sc->survey[pos];
+		}
+
+		memset(sc->cur_survey, 0, sizeof(struct survey_info));
+		sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
+	}
 }
 
 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw,