[PATCH] USB Serial: move old changelog comments out of source code

Create a new file just for these things, as they just get in the
way in the source files.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/io_edgeport.c

@@ -27,225 +27,6 @@
  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  * or Al Borchers <alborchers@steinerpoint.com>.
  *
- * Version history:
- * 
- * 2003_04_03 al borchers
- *  - fixed a bug (that shows up with dosemu) where the tty struct is
- *    used in a callback after it has been freed
- *
- * 2.3 2002_03_08 greg kroah-hartman
- *	- fixed bug when multiple devices were attached at the same time.
- *
- * 2.2 2001_11_14 greg kroah-hartman
- *	- fixed bug in edge_close that kept the port from being used more
- *	  than once.
- *	- fixed memory leak on device removal.
- *	- fixed potential double free of memory when command urb submitting
- *	  failed.
- *	- other small cleanups when the device is removed
- *	
- * 2.1 2001_07_09 greg kroah-hartman
- *	- added support for TIOCMBIS and TIOCMBIC.
- *
- *     (04/08/2001) gb
- *	- Identify version on module load.
- *
- * 2.0 2001_03_05 greg kroah-hartman
- *	- reworked entire driver to fit properly in with the other usb-serial
- *	  drivers.  Occasional oopses still happen, but it's a good start.
- *
- * 1.2.3 (02/23/2001) greg kroah-hartman
- *	- changed device table to work properly for 2.4.x final format.
- *	- fixed problem with dropping data at high data rates.
- *
- * 1.2.2 (11/27/2000) greg kroah-hartman
- *	- cleaned up more NTisms.
- *	- Added device table for 2.4.0-test11
- *
- * 1.2.1 (11/08/2000) greg kroah-hartman
- *	- Started to clean up NTisms.
- *	- Fixed problem with dev field of urb for kernels >= 2.4.0-test9
- *
- * 1.2 (10/17/2000) David Iacovelli
- * 	Remove all EPIC code and GPL source
- *  Fix RELEVANT_IFLAG macro to include flow control 
- *  changes port configuration changes.
- *  Fix redefinition of SERIAL_MAGIC
- *  Change all timeout values to 5 seconds
- *  Tried to fix the UHCI multiple urb submission, but failed miserably.
- *  it seems to work fine with OHCI.
- *  ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must 
- *    find a way to work arount this UHCI bug )
- *
- * 1.1 (10/11/2000) David Iacovelli
- *  Fix XON/XOFF flow control to support both IXON and IXOFF
- *
- * 0.9.27 (06/30/2000) David Iacovelli
- *  Added transmit queue and now allocate urb for command writes.
- *
- * 0.9.26 (06/29/2000) David Iacovelli
- *  Add support for 80251 based edgeport
- *
- * 0.9.25 (06/27/2000) David Iacovelli
- *  Do not close the port if it has multiple opens.
- *
- * 0.9.24 (05/26/2000) David Iacovelli
- *  Add IOCTLs to support RXTX and JAVA POS 
- *  and first cut at running BlackBox Demo
- *
- * 0.9.23 (05/24/2000) David Iacovelli
- *  Add IOCTLs to support RXTX and JAVA POS
- *
- * 0.9.22 (05/23/2000) David Iacovelli
- *  fixed bug in enumeration.  If epconfig turns on mapping by
- *  path after a device is already plugged in, we now update
- *  the mapping correctly
- *
- * 0.9.21 (05/16/2000) David Iacovelli
- *  Added BlockUntilChaseResp() to also wait for txcredits
- *  Updated the way we allocate and handle write URBs 
- *	Add debug code to dump buffers
- *
- * 0.9.20 (05/01/2000) David Iacovelli
- *	change driver to use usb/tts/
- *
- * 0.9.19 (05/01/2000) David Iacovelli
- *  Update code to compile if DEBUG is off
- *
- * 0.9.18 (04/28/2000) David Iacovelli
- *  cleanup and test tty_register with devfs
- *
- * 0.9.17 (04/27/2000) greg kroah-hartman
- * 	changed tty_register around to be like the way it
- * 	was before, but now it works properly with devfs.
- *
- * 0.9.16 (04/26/2000) david iacovelli
- *  Fixed bug in GetProductInfo()
- *
- * 0.9.15 (04/25/2000) david iacovelli
- *	Updated enumeration
- *
- * 0.9.14 (04/24/2000) david iacovelli
- *  Removed all config/status IOCTLS and 
- *  converted to using /proc/edgeport
- *  still playing with devfs
- *
- * 0.9.13 (04/24/2000) david iacovelli
- *  Removed configuration based on ttyUSB0
- *  Added support for configuration using /prod/edgeport
- *  first attempt at using devfs (not working yet!)
- *  Added IOCTL to GetProductInfo()
- *  Added support for custom baud rates
- *	Add support for random port numbers
- *
- * 0.9.12 (04/18/2000) david iacovelli
- *	added additional configuration IOCTLs
- *  use ttyUSB0 for configuration
- *
- * 0.9.11 (04/17/2000) greg kroah-hartman
- *	fixed module initialization race conditions.
- *	made all urbs dynamically allocated.
- *	made driver devfs compatible. now it only registers the tty device
- *	when the device is actually plugged in.
- *
- * 0.9.10 (04/13/2000) greg kroah-hartman
- *	added proc interface framework.
- *
- * 0.9.9 (04/13/2000) david iacovelli
- *	added enumeration code and ioctls to configure the device
- *
- * 0.9.8 (04/12/2000) david iacovelli
- *  Change interrupt read start when device is plugged in
- *  and stop when device is removed
- *	process interrupt reads when all ports are closed 
- *  (keep value of rxBytesAvail consistent with the edgeport)
- *  set the USB_BULK_QUEUE flag so that we can shove a bunch 
- *  of urbs at once down the pipe 
- *
- * 0.9.7 (04/10/2000) david iacovelli
- * 	start to add enumeration code.
- *  generate serial number for epic devices
- *  add support for kdb
- *
- * 0.9.6 (03/30/2000) david iacovelli
- *  add IOCTL to get string, manufacture, and boot descriptors
- *
- * 0.9.5 (03/14/2000) greg kroah-hartman
- *	more error checking added to SerialOpen to try to fix UHCI open problem
- *
- * 0.9.4 (03/09/2000) greg kroah-hartman
- *	added more error checking to handle oops when data is hanging
- *	around and tty is abruptly closed.
- *
- * 0.9.3 (03/09/2000) david iacovelli
- *	Add epic support for xon/xoff chars
- *	play with performance
- *
- * 0.9.2 (03/08/2000) greg kroah-hartman
- *	changed most "info" calls to "dbg"
- *	implemented flow control properly in the termios call
- *
- * 0.9.1 (03/08/2000) david iacovelli
- *	added EPIC support
- *	enabled bootloader update
- *
- * 0.9 (03/08/2000) greg kroah-hartman
- *	Release to IO networks.
- *	Integrated changes that David made
- *  made getting urbs for writing SMP safe
- *
- * 0.8 (03/07/2000) greg kroah-hartman
- *	Release to IO networks.
- *	Fixed problems that were seen in code by David.
- *  Now both Edgeport/4 and Edgeport/2 works properly.
- *  Changed most of the functions to use port instead of serial.
- *
- * 0.7 (02/27/2000) greg kroah-hartman
- *	Milestone 3 release.
- *	Release to IO Networks
- *	ioctl for waiting on line change implemented.
- *	ioctl for getting statistics implemented.
- *	multiport support working.
- *	lsr and msr registers are now handled properly.
- *	change break now hooked up and working.
- *	support for all known Edgeport devices.
- *
- * 0.6 (02/22/2000) greg kroah-hartman
- *	Release to IO networks.
- *	CHASE is implemented correctly when port is closed.
- *	SerialOpen now blocks correctly until port is fully opened.
- *
- * 0.5 (02/20/2000) greg kroah-hartman
- *	Release to IO networks.
- *	Known problems:
- *		modem status register changes are not sent on to the user
- *		CHASE is not implemented when the port is closed.
- *
- * 0.4 (02/16/2000) greg kroah-hartman
- *	Second cut at the CeBit demo.
- *	Doesn't leak memory on every write to the port
- *	Still small leaks on startup.
- *	Added support for Edgeport/2 and Edgeport/8
- *
- * 0.3 (02/15/2000) greg kroah-hartman
- *	CeBit demo release.
- *	Force the line settings to 4800, 8, 1, e for the demo.
- *	Warning! This version leaks memory like crazy!
- *
- * 0.2 (01/30/2000) greg kroah-hartman
- *	Milestone 1 release.
- *	Device is found by USB subsystem, enumerated, fimware is downloaded
- *	and the descriptors are printed to the debug log, config is set, and
- *	green light starts to blink. Open port works, and data can be sent
- *	and received at the default settings of the UART. Loopback connector
- *	and debug log confirms this.
- * 
- * 0.1 (01/23/2000) greg kroah-hartman
- *	Initial release to help IO Networks try to set up their test system. 
- *	Edgeport4 is recognized, firmware is downloaded, config is set so 
- *	device blinks green light every 3 sec. Port is bound, but opening,
- *	closing, and sending data do not work properly.
- * 
  */
 
 #include <linux/config.h>

drivers/usb/serial/pl2303.c

@@ -8,31 +8,10 @@
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
+ *	the Free Software Foundation; either version 2 of the License.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
- * 2002_Mar_26 gkh
- *	allowed driver to work properly if there is no tty assigned to a port
- *	(this happens for serial console devices.)
- *
- * 2001_Oct_06 gkh
- *	Added RTS and DTR line control.  Thanks to joe@bndlg.de for parts of it.
- *
- * 2001_Sep_19 gkh
- *	Added break support.
- *
- * 2001_Aug_30 gkh
- *	fixed oops in write_bulk_callback.
- *
- * 2001_Aug_28 gkh
- *	reworked buffer logic to be like other usb-serial drivers.  Hopefully
- *	removing some reported problems.
- *
- * 2001_Jun_06 gkh
- *	finished porting to 2.4 format.
- * 
  */
 
 #include <linux/config.h>

drivers/usb/serial/usb-serial.h

 /*
  * USB Serial Converter driver
  *
- *	Copyright (C) 1999 - 2004
+ *	Copyright (C) 1999 - 2005
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
- * (03/26/2002) gkh
- *	removed the port->tty check from port_paranoia_check() due to serial
- *	consoles not having a tty device assigned to them.
- *
- * (12/03/2001) gkh
- *	removed active from the port structure.
- *	added documentation to the usb_serial_device_type structure
- *
- * (10/10/2001) gkh
- *	added vendor and product to serial structure.  Needed to determine device
- *	owner when the device is disconnected.
- *
- * (05/30/2001) gkh
- *	added sem to port structure and removed port_lock
- *
- * (10/05/2000) gkh
- *	Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- *	fix bug with urb->dev not being set properly, now that the usb core
- *	needs it.
- * 
- * (09/11/2000) gkh
- *	Added usb_serial_debug_data function to help get rid of #DEBUG in the
- *	drivers.
- *
- * (08/28/2000) gkh
- *	Added port_lock to port structure.
- *
- * (08/08/2000) gkh
- *	Added open_count to port structure.
- *
- * (07/23/2000) gkh
- *	Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- *	Modifications to allow usb-serial drivers to be modules.
- *
+ *	the Free Software Foundation; either version 2 of the License.
  *
  */
 

drivers/usb/serial/visor.c

@@ -7,139 +7,10 @@
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
+ *	the Free Software Foundation; either version 2 of the License.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
- * (06/03/2003) Judd Montgomery <judd at jpilot.org>
- *     Added support for module parameter options for untested/unknown
- *     devices.
- *
- * (03/09/2003) gkh
- *	Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
- *	<brachtl@redgrep.cz> for the information.
- *
- * (03/05/2003) gkh
- *	Think Treo support is now working.
- *
- * (04/03/2002) gkh
- *	Added support for the Sony OS 4.1 devices.  Thanks to Hiroyuki ARAKI
- *	<hiro@zob.ne.jp> for the information.
- *
- * (03/27/2002) gkh
- *	Removed assumptions that port->tty was always valid (is not true
- *	for usb serial console devices.)
- *
- * (03/23/2002) gkh
- *	Added support for the Palm i705 device, thanks to Thomas Riemer
- *	<tom@netmech.com> for the information.
- *
- * (03/21/2002) gkh
- *	Added support for the Palm m130 device, thanks to Udo Eisenbarth
- *	<udo.eisenbarth@web.de> for the information.
- *
- * (02/27/2002) gkh
- *	Reworked the urb handling logic.  We have no more pool, but dynamically
- *	allocate the urb and the transfer buffer on the fly.  In testing this
- *	does not incure any measurable overhead.  This also relies on the fact
- *	that we have proper reference counting logic for urbs.
- *
- * (02/21/2002) SilaS
- *  Added initial support for the Palm m515 devices.
- *
- * (02/14/2002) gkh
- *	Added support for the Clie S-360 device.
- *
- * (12/18/2001) gkh
- *	Added better Clie support for 3.5 devices.  Thanks to Geoffrey Levand
- *	for the patch.
- *
- * (11/11/2001) gkh
- *	Added support for the m125 devices, and added check to prevent oopses
- *	for Clié devices that lie about the number of ports they have.
- *
- * (08/30/2001) gkh
- *	Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- *	Many thanks to Daniel Burke, and Bryan Payne for helping with this.
- *
- * (08/23/2001) gkh
- *	fixed a few potential bugs pointed out by Oliver Neukum.
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (05/28/2000) gkh
- *	Added initial support for the Palm m500 and Palm m505 devices.
- *
- * (04/08/2001) gb
- *	Identify version on module load.
- *
- * (01/21/2000) gkh
- *	Added write_room and chars_in_buffer, as they were previously using the
- *	generic driver versions which is all wrong now that we are using an urb
- *	pool.  Thanks to Wolfgang Grandegger for pointing this out to me.
- *	Removed count assignment in the write function, which was not needed anymore
- *	either.  Thanks to Al Borchers for pointing this out.
- *
- * (12/12/2000) gkh
- *	Moved MOD_DEC to end of visor_close to be nicer, as the final write 
- *	message can sleep.
- * 
- * (11/12/2000) gkh
- *	Fixed bug with data being dropped on the floor by forcing tty->low_latency
- *	to be on.  Hopefully this fixes the OHCI issue!
- *
- * (11/01/2000) Adam J. Richter
- *	usb_device_id table support
- * 
- * (10/05/2000) gkh
- *	Fixed bug with urb->dev not being set properly, now that the usb
- *	core needs it.
- * 
- * (09/11/2000) gkh
- *	Got rid of always calling kmalloc for every urb we wrote out to the
- *	device.
- *	Added visor_read_callback so we can keep track of bytes in and out for
- *	those people who like to know the speed of their device.
- *	Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (09/06/2000) gkh
- *	Fixed oops in visor_exit.  Need to uncomment usb_unlink_urb call _after_
- *	the host controller drivers set urb->dev = NULL when the urb is finished.
- *
- * (08/28/2000) gkh
- *	Added locks for SMP safeness.
- *
- * (08/08/2000) gkh
- *	Fixed endian problem in visor_startup.
- *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more 
- *	than once.
- * 
- * (07/23/2000) gkh
- *	Added pool of write urbs to speed up transfers to the visor.
- * 
- * (07/19/2000) gkh
- *	Added module_init and module_exit functions to handle the fact that this
- *	driver is a loadable module now.
- *
- * (07/03/2000) gkh
- *	Added visor_set_ioctl and visor_set_termios functions (they don't do much
- *	of anything, but are good for debugging.)
- * 
- * (06/25/2000) gkh
- *	Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- *	bug that people have been reporting.
- *
- * (06/23/2000) gkh
- *	Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (04/27/2000) Ryan VanderBijl
- * 	Fixed memory leak in visor_close
- *
- * (03/26/2000) gkh
- *	Split driver up into device specific pieces.
- * 
  */
 
 #include <linux/config.h>