Merge tag 'regulator-3.4' of...

Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next/drivers

The pxa regulator branch removes the bq24022 driver, while a lot of
other regulator drivers got added in the regulator tree. This
resolves the trivial conflicts by merging in the regulator patches
that are already merged into v3.4.

Conflicts:
	drivers/regulator/Kconfig
	drivers/regulator/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/regulator/twl-regulator.txt

+TWL family of regulators
+
+Required properties:
+For twl6030 regulators/LDOs
+- compatible:
+  - "ti,twl6030-vaux1" for VAUX1 LDO
+  - "ti,twl6030-vaux2" for VAUX2 LDO
+  - "ti,twl6030-vaux3" for VAUX3 LDO
+  - "ti,twl6030-vmmc" for VMMC LDO
+  - "ti,twl6030-vpp" for VPP LDO
+  - "ti,twl6030-vusim" for VUSIM LDO
+  - "ti,twl6030-vana" for VANA LDO
+  - "ti,twl6030-vcxio" for VCXIO LDO
+  - "ti,twl6030-vdac" for VDAC LDO
+  - "ti,twl6030-vusb" for VUSB LDO
+  - "ti,twl6030-v1v8" for V1V8 LDO
+  - "ti,twl6030-v2v1" for V2V1 LDO
+  - "ti,twl6030-clk32kg" for CLK32KG RESOURCE
+  - "ti,twl6030-vdd1" for VDD1 SMPS
+  - "ti,twl6030-vdd2" for VDD2 SMPS
+  - "ti,twl6030-vdd3" for VDD3 SMPS
+For twl6025 regulators/LDOs
+- compatible:
+  - "ti,twl6025-ldo1" for LDO1 LDO
+  - "ti,twl6025-ldo2" for LDO2 LDO
+  - "ti,twl6025-ldo3" for LDO3 LDO
+  - "ti,twl6025-ldo4" for LDO4 LDO
+  - "ti,twl6025-ldo5" for LDO5 LDO
+  - "ti,twl6025-ldo6" for LDO6 LDO
+  - "ti,twl6025-ldo7" for LDO7 LDO
+  - "ti,twl6025-ldoln" for LDOLN LDO
+  - "ti,twl6025-ldousb" for LDOUSB LDO
+  - "ti,twl6025-smps3" for SMPS3 SMPS
+  - "ti,twl6025-smps4" for SMPS4 SMPS
+  - "ti,twl6025-vio" for VIO SMPS
+For twl4030 regulators/LDOs
+- compatible:
+  - "ti,twl4030-vaux1" for VAUX1 LDO
+  - "ti,twl4030-vaux2" for VAUX2 LDO
+  - "ti,twl5030-vaux2" for VAUX2 LDO
+  - "ti,twl4030-vaux3" for VAUX3 LDO
+  - "ti,twl4030-vaux4" for VAUX4 LDO
+  - "ti,twl4030-vmmc1" for VMMC1 LDO
+  - "ti,twl4030-vmmc2" for VMMC2 LDO
+  - "ti,twl4030-vpll1" for VPLL1 LDO
+  - "ti,twl4030-vpll2" for VPLL2 LDO
+  - "ti,twl4030-vsim" for VSIM LDO
+  - "ti,twl4030-vdac" for VDAC LDO
+  - "ti,twl4030-vintana2" for VINTANA2 LDO
+  - "ti,twl4030-vio" for VIO LDO
+  - "ti,twl4030-vdd1" for VDD1 SMPS
+  - "ti,twl4030-vdd2" for VDD2 SMPS
+  - "ti,twl4030-vintana1" for VINTANA1 LDO
+  - "ti,twl4030-vintdig" for VINTDIG LDO
+  - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
+  - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
+  - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+	xyz: regulator@0 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt  = <1000000>;
+		regulator-max-microvolt  = <3000000>;
+	};

Documentation/driver-model/devres.txt

@@ -271,3 +271,8 @@ IOMAP
   pcim_iounmap()
   pcim_iomap_table()	: array of mapped addresses indexed by BAR
   pcim_iomap_regions()	: do request_region() and iomap() on multiple BARs
+
+REGULATOR
+  devm_regulator_get()
+  devm_regulator_put()
+  devm_regulator_bulk_get()

arch/arm/mach-imx/mach-pcm037.c

@@ -32,6 +32,8 @@
 #include <linux/usb/ulpi.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <media/soc_camera.h>
 
@@ -570,6 +572,11 @@ static int __init pcm037_otg_mode(char *options)
 }
 __setup("otg_mode=", pcm037_otg_mode);
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 /*
  * Board specific initialization.
  */
@@ -579,6 +586,8 @@ static void __init pcm037_init(void)
 
 	imx31_soc_init();
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),

arch/arm/mach-u300/i2c.c

@@ -60,7 +60,6 @@ static struct regulator_consumer_supply supply_ldo_c[] = {
  */
 static struct regulator_consumer_supply supply_ldo_d[] = {
 	{
-		.dev = NULL,
 		.supply = "vana15", /* Powers the SoC (CPU etc) */
 	},
 };
@@ -92,7 +91,6 @@ static struct regulator_consumer_supply supply_ldo_k[] = {
  */
 static struct regulator_consumer_supply supply_ldo_ext[] = {
 	{
-		.dev = NULL,
 		.supply = "vext", /* External power */
 	},
 };

arch/arm/plat-mxc/3ds_debugboard.c

@@ -16,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <mach/hardware.h>
 
@@ -148,6 +150,11 @@ static struct irq_chip expio_irq_chip = {
 	.irq_unmask = expio_unmask_irq,
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 int __init mxc_expio_init(u32 base, u32 p_irq)
 {
 	int i;
@@ -188,6 +195,8 @@ int __init mxc_expio_init(u32 base, u32 p_irq)
 	irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
 
 	/* Register Lan device on the debugboard */
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
 	smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
 	platform_device_register(&smsc_lan9217_device);

drivers/mfd/twl-core.c

@@ -617,6 +617,8 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
 		unsigned num_consumers, unsigned long features)
 {
 	unsigned sub_chip_id;
+	struct twl_regulator_driver_data drv_data;
+
 	/* regulator framework demands init_data ... */
 	if (!pdata)
 		return NULL;
@@ -626,7 +628,19 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
 		pdata->num_consumer_supplies = num_consumers;
 	}
 
-	pdata->driver_data = (void *)features;
+	if (pdata->driver_data) {
+		/* If we have existing drv_data, just add the flags */
+		struct twl_regulator_driver_data *tmp;
+		tmp = pdata->driver_data;
+		tmp->features |= features;
+	} else {
+		/* add new driver data struct, used only during init */
+		drv_data.features = features;
+		drv_data.set_voltage = NULL;
+		drv_data.get_voltage = NULL;
+		drv_data.data = NULL;
+		pdata->driver_data = &drv_data;
+	}
 
 	/* NOTE:  we currently ignore regulator IRQs, e.g. for short circuits */
 	sub_chip_id = twl_map[TWL_MODULE_PM_MASTER].sid;
@@ -749,9 +763,9 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 
 		/* we need to connect regulators to this transceiver */
 		if (twl_has_regulator() && child) {
-			usb1v5.dev = child;
-			usb1v8.dev = child;
-			usb3v1.dev = child;
+			usb1v5.dev_name = dev_name(child);
+			usb1v8.dev_name = dev_name(child);
+			usb3v1.dev_name = dev_name(child);
 		}
 	}
 	if (twl_has_usb() && pdata->usb && twl_class_is_6030()) {
@@ -797,7 +811,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 		/* we need to connect regulators to this transceiver */
 		if (twl_has_regulator() && child)
-			usb3v3.dev = child;
+			usb3v3.dev_name = dev_name(child);
 	} else if (twl_has_regulator() && twl_class_is_6030()) {
 		if (features & TWL6025_SUBCLASS)
 			child = add_regulator(TWL6025_REG_LDOUSB,
@@ -933,6 +947,31 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	/* twl6030 regulators */
 	if (twl_has_regulator() && twl_class_is_6030() &&
 			!(features & TWL6025_SUBCLASS)) {
+		child = add_regulator(TWL6030_REG_VDD1, pdata->vdd1,
+					features);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VDD2, pdata->vdd2,
+					features);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VDD3, pdata->vdd3,
+					features);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_V1V8, pdata->v1v8,
+					features);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_V2V1, pdata->v2v1,
+					features);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
 		child = add_regulator(TWL6030_REG_VMMC, pdata->vmmc,
 					features);
 		if (IS_ERR(child))

drivers/regulator/Makefile

@@ -3,49 +3,55 @@
 #
 
 
-obj-$(CONFIG_REGULATOR) += core.o dummy.o
+obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o
 obj-$(CONFIG_OF) += of_regulator.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
+obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
+obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
+obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
+obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
+obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
+obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
+obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
 obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
-obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
-obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
-obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
-obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
-obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
-obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
-obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
-obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
-obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
-obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
-obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
-obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
+obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
+obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
-obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
-obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
-obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
-obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
-obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
-obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
+obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
+obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
+obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
+obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
+
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG

drivers/regulator/aat2870-regulator.c

@@ -31,7 +31,7 @@
 #include <linux/mfd/aat2870.h>
 
 struct aat2870_regulator {
-	struct platform_device *pdev;
+	struct aat2870_data *aat2870;
 	struct regulator_desc desc;
 
 	const int *voltages; /* uV */
@@ -60,7 +60,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
 				       unsigned selector)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 
 	return aat2870->update(aat2870, ri->voltage_addr, ri->voltage_mask,
 			       selector << ri->voltage_shift);
@@ -69,7 +69,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
 static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 	u8 val;
 	int ret;
 
@@ -83,7 +83,7 @@ static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev)
 static int aat2870_ldo_enable(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 
 	return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask,
 			       ri->enable_mask);
@@ -92,7 +92,7 @@ static int aat2870_ldo_enable(struct regulator_dev *rdev)
 static int aat2870_ldo_disable(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 
 	return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, 0);
 }
@@ -100,7 +100,7 @@ static int aat2870_ldo_disable(struct regulator_dev *rdev)
 static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 	u8 val;
 	int ret;
 
@@ -185,7 +185,7 @@ static int aat2870_regulator_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
 		return -EINVAL;
 	}
-	ri->pdev = pdev;
+	ri->aat2870 = dev_get_drvdata(pdev->dev.parent);
 
 	rdev = regulator_register(&ri->desc, &pdev->dev,
 				  pdev->dev.platform_data, ri, NULL);

drivers/regulator/ab8500.c

@@ -201,7 +201,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 	return info->voltages[selector];
 }
 
-static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
+static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	int ret, val;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
@@ -229,11 +229,9 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
 	/* vintcore has a different layout */
 	val = regval & info->voltage_mask;
 	if (info->desc.id == AB8500_LDO_INTCORE)
-		ret = info->voltages[val >> 0x3];
+		return val >> 0x3;
 	else
-		ret = info->voltages[val];
-
-	return ret;
+		return val;
 }
 
 static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
@@ -320,7 +318,7 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.enable		= ab8500_regulator_enable,
 	.disable	= ab8500_regulator_disable,
 	.is_enabled	= ab8500_regulator_is_enabled,
-	.get_voltage	= ab8500_regulator_get_voltage,
+	.get_voltage_sel = ab8500_regulator_get_voltage_sel,
 	.set_voltage	= ab8500_regulator_set_voltage,
 	.list_voltage	= ab8500_list_voltage,
 	.enable_time	= ab8500_regulator_enable_time,

drivers/regulator/ad5398.c

@@ -94,8 +94,8 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int
 	if (max_uA > chip->max_uA || max_uA < chip->min_uA)
 		return -EINVAL;
 
-	selector = ((min_uA - chip->min_uA) * chip->current_level +
-			range_uA - 1) / range_uA;
+	selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level,
+				range_uA);
 	if (ad5398_calc_current(chip, selector) > max_uA)
 		return -EINVAL;
 

drivers/regulator/anatop-regulator.c

+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/anatop.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+struct anatop_regulator {
+	const char *name;
+	u32 control_reg;
+	struct anatop *mfd;
+	int vol_bit_shift;
+	int vol_bit_width;
+	int min_bit_val;
+	int min_voltage;
+	int max_voltage;
+	struct regulator_desc rdesc;
+	struct regulator_init_data *initdata;
+};
+
+static int anatop_set_voltage(struct regulator_dev *reg, int min_uV,
+				  int max_uV, unsigned *selector)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	u32 val, sel;
+	int uv;
+
+	uv = min_uV;
+	dev_dbg(&reg->dev, "%s: uv %d, min %d, max %d\n", __func__,
+		uv, anatop_reg->min_voltage,
+		anatop_reg->max_voltage);
+
+	if (uv < anatop_reg->min_voltage) {
+		if (max_uV > anatop_reg->min_voltage)
+			uv = anatop_reg->min_voltage;
+		else
+			return -EINVAL;
+	}
+
+	if (!anatop_reg->control_reg)
+		return -ENOTSUPP;
+
+	sel = DIV_ROUND_UP(uv - anatop_reg->min_voltage, 25000);
+	if (sel * 25000 + anatop_reg->min_voltage > anatop_reg->max_voltage)
+		return -EINVAL;
+	val = anatop_reg->min_bit_val + sel;
+	*selector = sel;
+	dev_dbg(&reg->dev, "%s: calculated val %d\n", __func__, val);
+	anatop_set_bits(anatop_reg->mfd,
+			anatop_reg->control_reg,
+			anatop_reg->vol_bit_shift,
+			anatop_reg->vol_bit_width,
+			val);
+
+	return 0;
+}
+
+static int anatop_get_voltage_sel(struct regulator_dev *reg)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	u32 val;
+
+	if (!anatop_reg->control_reg)
+		return -ENOTSUPP;
+
+	val = anatop_get_bits(anatop_reg->mfd,
+			      anatop_reg->control_reg,
+			      anatop_reg->vol_bit_shift,
+			      anatop_reg->vol_bit_width);
+
+	return val - anatop_reg->min_bit_val;
+}
+
+static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	int uv;
+
+	uv = anatop_reg->min_voltage + selector * 25000;
+	dev_dbg(&reg->dev, "vddio = %d, selector = %u\n", uv, selector);
+
+	return uv;
+}
+
+static struct regulator_ops anatop_rops = {
+	.set_voltage     = anatop_set_voltage,
+	.get_voltage_sel = anatop_get_voltage_sel,
+	.list_voltage    = anatop_list_voltage,
+};
+
+static int __devinit anatop_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct regulator_desc *rdesc;
+	struct regulator_dev *rdev;
+	struct anatop_regulator *sreg;
+	struct regulator_init_data *initdata;
+	struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
+	int ret = 0;
+
+	initdata = of_get_regulator_init_data(dev, np);
+	sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+	if (!sreg)
+		return -ENOMEM;
+	sreg->initdata = initdata;
+	sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL),
+			     GFP_KERNEL);
+	rdesc = &sreg->rdesc;
+	memset(rdesc, 0, sizeof(*rdesc));
+	rdesc->name = sreg->name;
+	rdesc->ops = &anatop_rops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->owner = THIS_MODULE;
+	sreg->mfd = anatopmfd;
+	ret = of_property_read_u32(np, "reg", &sreg->control_reg);
+	if (ret) {
+		dev_err(dev, "no reg property set\n");
+		goto anatop_probe_end;
+	}
+	ret = of_property_read_u32(np, "anatop-vol-bit-width",
+				   &sreg->vol_bit_width);
+	if (ret) {
+		dev_err(dev, "no anatop-vol-bit-width property set\n");
+		goto anatop_probe_end;
+	}
+	ret = of_property_read_u32(np, "anatop-vol-bit-shift",
+				   &sreg->vol_bit_shift);
+	if (ret) {
+		dev_err(dev, "no anatop-vol-bit-shift property set\n");
+		goto anatop_probe_end;
+	}
+	ret = of_property_read_u32(np, "anatop-min-bit-val",
+				   &sreg->min_bit_val);
+	if (ret) {
+		dev_err(dev, "no anatop-min-bit-val property set\n");
+		goto anatop_probe_end;
+	}
+	ret = of_property_read_u32(np, "anatop-min-voltage",
+				   &sreg->min_voltage);
+	if (ret) {
+		dev_err(dev, "no anatop-min-voltage property set\n");
+		goto anatop_probe_end;
+	}
+	ret = of_property_read_u32(np, "anatop-max-voltage",
+				   &sreg->max_voltage);
+	if (ret) {
+		dev_err(dev, "no anatop-max-voltage property set\n");
+		goto anatop_probe_end;
+	}
+
+	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
+		/ 25000 + 1;
+
+	/* register regulator */
+	rdev = regulator_register(rdesc, dev,
+				  initdata, sreg, pdev->dev.of_node);
+	if (IS_ERR(rdev)) {
+		dev_err(dev, "failed to register %s\n",
+			rdesc->name);
+		ret = PTR_ERR(rdev);
+		goto anatop_probe_end;
+	}
+
+	platform_set_drvdata(pdev, rdev);
+
+anatop_probe_end:
+	if (ret)
+		kfree(sreg->name);
+
+	return ret;
+}
+
+static int __devexit anatop_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+	struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
+	const char *name = sreg->name;
+
+	regulator_unregister(rdev);
+	kfree(name);
+
+	return 0;
+}
+
+static struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = {
+	{ .compatible = "fsl,anatop-regulator", },
+	{ /* end */ }
+};
+
+static struct platform_driver anatop_regulator = {
+	.driver = {
+		.name	= "anatop_regulator",
+		.owner  = THIS_MODULE,
+		.of_match_table = of_anatop_regulator_match_tbl,
+	},
+	.probe	= anatop_regulator_probe,
+	.remove	= anatop_regulator_remove,
+};
+
+static int __init anatop_regulator_init(void)
+{
+	return platform_driver_register(&anatop_regulator);
+}
+postcore_initcall(anatop_regulator_init);
+
+static void __exit anatop_regulator_exit(void)
+{
+	platform_driver_unregister(&anatop_regulator);
+}
+module_exit(anatop_regulator_exit);
+
+MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>, "
+	      "Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
+MODULE_DESCRIPTION("ANATOP Regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/da903x.c

@@ -119,7 +119,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = val;
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -202,7 +202,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = val;
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -233,10 +233,10 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
 
 	thresh = (info->max_uV + info->min_uV) / 2;
 	if (min_uV < thresh) {
-		val = (thresh - min_uV + info->step_uV - 1) / info->step_uV;
+		val = DIV_ROUND_UP(thresh - min_uV, info->step_uV);
 		val |= 0x4;
 	} else {
-		val = (min_uV - thresh + info->step_uV - 1) / info->step_uV;
+		val = DIV_ROUND_UP(min_uV - thresh, info->step_uV);
 	}
 
 	*selector = val;
@@ -281,7 +281,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = val;
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -307,7 +307,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val);
 	*selector = val;
 	val <<= info->vol_shift;

drivers/regulator/db8500-prcmu.c

@@ -18,74 +18,11 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/module.h>
-
-/*
- * power state reference count
- */
-static int power_state_active_cnt; /* will initialize to zero */
-static DEFINE_SPINLOCK(power_state_active_lock);
-
-static void power_state_active_enable(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&power_state_active_lock, flags);
-	power_state_active_cnt++;
-	spin_unlock_irqrestore(&power_state_active_lock, flags);
-}
-
-static int power_state_active_disable(void)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&power_state_active_lock, flags);
-	if (power_state_active_cnt <= 0) {
-		pr_err("power state: unbalanced enable/disable calls\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	power_state_active_cnt--;
-out:
-	spin_unlock_irqrestore(&power_state_active_lock, flags);
-	return ret;
-}
-
-/*
- * Exported interface for CPUIdle only. This function is called when interrupts
- * are turned off. Hence, no locking.
- */
-int power_state_active_is_enabled(void)
-{
-	return (power_state_active_cnt > 0);
-}
-
-/**
- * struct db8500_regulator_info - db8500 regulator information
- * @dev: device pointer
- * @desc: regulator description
- * @rdev: regulator device pointer
- * @is_enabled: status of the regulator
- * @epod_id: id for EPOD (power domain)
- * @is_ramret: RAM retention switch for EPOD (power domain)
- * @operating_point: operating point (only for vape, to be removed)
- *
- */
-struct db8500_regulator_info {
-	struct device *dev;
-	struct regulator_desc desc;
-	struct regulator_dev *rdev;
-	bool is_enabled;
-	u16 epod_id;
-	bool is_ramret;
-	bool exclude_from_power_state;
-	unsigned int operating_point;
-};
+#include "dbx500-prcmu.h"
 
 static int db8500_regulator_enable(struct regulator_dev *rdev)
 {
-	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
 
 	if (info == NULL)
 		return -EINVAL;
@@ -93,16 +30,18 @@ static int db8500_regulator_enable(struct regulator_dev *rdev)
 	dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n",
 		info->desc.name);
 
+	if (!info->is_enabled) {
 		info->is_enabled = true;
 		if (!info->exclude_from_power_state)
 			power_state_active_enable();
+	}
 
 	return 0;
 }
 
 static int db8500_regulator_disable(struct regulator_dev *rdev)
 {
-	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
 	int ret = 0;
 
 	if (info == NULL)
@@ -111,16 +50,18 @@ static int db8500_regulator_disable(struct regulator_dev *rdev)
 	dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n",
 		info->desc.name);
 
+	if (info->is_enabled) {
 		info->is_enabled = false;
 		if (!info->exclude_from_power_state)
 			ret = power_state_active_disable();
+	}
 
 	return ret;
 }
 
 static int db8500_regulator_is_enabled(struct regulator_dev *rdev)
 {
-	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
 
 	if (info == NULL)
 		return -EINVAL;
@@ -197,7 +138,7 @@ static int disable_epod(u16 epod_id, bool ramret)
  */
 static int db8500_regulator_switch_enable(struct regulator_dev *rdev)
 {
-	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
 	int ret;
 
 	if (info == NULL)
@@ -221,7 +162,7 @@ static int db8500_regulator_switch_enable(struct regulator_dev *rdev)
 
 static int db8500_regulator_switch_disable(struct regulator_dev *rdev)
 {
-	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
 	int ret;
 
 	if (info == NULL)
@@ -245,7 +186,7 @@ static int db8500_regulator_switch_disable(struct regulator_dev *rdev)
 
 static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev)
 {
-	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
 
 	if (info == NULL)
 		return -EINVAL;
@@ -266,8 +207,8 @@ static struct regulator_ops db8500_regulator_switch_ops = {
 /*
  * Regulator information
  */
-static struct db8500_regulator_info
-db8500_regulator_info[DB8500_NUM_REGULATORS] = {
+static struct dbx500_regulator_info
+dbx500_regulator_info[DB8500_NUM_REGULATORS] = {
 	[DB8500_REGULATOR_VAPE] = {
 		.desc = {
 			.name	= "db8500-vape",
@@ -476,12 +417,12 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev)
 	int i, err;
 
 	/* register all regulators */
-	for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
-		struct db8500_regulator_info *info;
+	for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) {
+		struct dbx500_regulator_info *info;
 		struct regulator_init_data *init_data = &db8500_init_data[i];
 
 		/* assign per-regulator data */
-		info = &db8500_regulator_info[i];
+		info = &dbx500_regulator_info[i];
 		info->dev = &pdev->dev;
 
 		/* register with the regulator framework */
@@ -494,7 +435,7 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev)
 
 			/* if failing, unregister all earlier regulators */
 			while (--i >= 0) {
-				info = &db8500_regulator_info[i];
+				info = &dbx500_regulator_info[i];
 				regulator_unregister(info->rdev);
 			}
 			return err;
@@ -503,17 +444,22 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev)
 		dev_dbg(rdev_get_dev(info->rdev),
 			"regulator-%s-probed\n", info->desc.name);
 	}
+	err = ux500_regulator_debug_init(pdev,
+					 dbx500_regulator_info,
+					 ARRAY_SIZE(dbx500_regulator_info));
 
-	return 0;
+	return err;
 }
 
 static int __exit db8500_regulator_remove(struct platform_device *pdev)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
-		struct db8500_regulator_info *info;
-		info = &db8500_regulator_info[i];
+	ux500_regulator_debug_exit();
+
+	for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) {
+		struct dbx500_regulator_info *info;
+		info = &dbx500_regulator_info[i];
 
 		dev_vdbg(rdev_get_dev(info->rdev),
 			"regulator-%s-remove\n", info->desc.name);

drivers/regulator/dbx500-prcmu.c

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * UX500 common part of Power domain regulators
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/regulator/driver.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include "dbx500-prcmu.h"
+
+/*
+ * power state reference count
+ */
+static int power_state_active_cnt; /* will initialize to zero */
+static DEFINE_SPINLOCK(power_state_active_lock);
+
+int power_state_active_get(void)
+{
+	unsigned long flags;
+	int cnt;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	cnt = power_state_active_cnt;
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+
+	return cnt;
+}
+
+void power_state_active_enable(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	power_state_active_cnt++;
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+}
+
+int power_state_active_disable(void)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	if (power_state_active_cnt <= 0) {
+		pr_err("power state: unbalanced enable/disable calls\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	power_state_active_cnt--;
+out:
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+	return ret;
+}
+
+#ifdef CONFIG_REGULATOR_DEBUG
+
+static struct ux500_regulator_debug {
+	struct dentry *dir;
+	struct dentry *status_file;
+	struct dentry *power_state_cnt_file;
+	struct dbx500_regulator_info *regulator_array;
+	int num_regulators;
+	u8 *state_before_suspend;
+	u8 *state_after_suspend;
+} rdebug;
+
+void ux500_regulator_suspend_debug(void)
+{
+	int i;
+	for (i = 0; i < rdebug.num_regulators; i++)
+		rdebug.state_before_suspend[i] =
+			rdebug.regulator_array[i].is_enabled;
+}
+
+void ux500_regulator_resume_debug(void)
+{
+	int i;
+	for (i = 0; i < rdebug.num_regulators; i++)
+		rdebug.state_after_suspend[i] =
+			rdebug.regulator_array[i].is_enabled;
+}
+
+static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p)
+{
+	struct device *dev = s->private;
+	int err;
+
+	/* print power state count */
+	err = seq_printf(s, "ux500-regulator power state count: %i\n",
+		power_state_active_get());
+	if (err < 0)
+		dev_err(dev, "seq_printf overflow\n");
+
+	return 0;
+}
+
+static int ux500_regulator_power_state_cnt_open(struct inode *inode,
+	struct file *file)
+{
+	return single_open(file, ux500_regulator_power_state_cnt_print,
+		inode->i_private);
+}
+
+static const struct file_operations ux500_regulator_power_state_cnt_fops = {
+	.open = ux500_regulator_power_state_cnt_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ux500_regulator_status_print(struct seq_file *s, void *p)
+{
+	struct device *dev = s->private;
+	int err;
+	int i;
+
+	/* print dump header */
+	err = seq_printf(s, "ux500-regulator status:\n");
+	if (err < 0)
+		dev_err(dev, "seq_printf overflow\n");
+
+	err = seq_printf(s, "%31s : %8s : %8s\n", "current",
+		"before", "after");
+	if (err < 0)
+		dev_err(dev, "seq_printf overflow\n");
+
+	for (i = 0; i < rdebug.num_regulators; i++) {
+		struct dbx500_regulator_info *info;
+		/* Access per-regulator data */
+		info = &rdebug.regulator_array[i];
+
+		/* print status */
+		err = seq_printf(s, "%20s : %8s : %8s : %8s\n", info->desc.name,
+			info->is_enabled ? "enabled" : "disabled",
+			rdebug.state_before_suspend[i] ? "enabled" : "disabled",
+			rdebug.state_after_suspend[i] ? "enabled" : "disabled");
+		if (err < 0)
+			dev_err(dev, "seq_printf overflow\n");
+	}
+
+	return 0;
+}
+
+static int ux500_regulator_status_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ux500_regulator_status_print,
+		inode->i_private);
+}
+
+static const struct file_operations ux500_regulator_status_fops = {
+	.open = ux500_regulator_status_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+int __attribute__((weak)) dbx500_regulator_testcase(
+	struct dbx500_regulator_info *regulator_info,
+	int num_regulators)
+{
+	return 0;
+}
+
+int __devinit
+ux500_regulator_debug_init(struct platform_device *pdev,
+	struct dbx500_regulator_info *regulator_info,
+	int num_regulators)
+{
+	/* create directory */
+	rdebug.dir = debugfs_create_dir("ux500-regulator", NULL);
+	if (!rdebug.dir)
+		goto exit_no_debugfs;
+
+	/* create "status" file */
+	rdebug.status_file = debugfs_create_file("status",
+		S_IRUGO, rdebug.dir, &pdev->dev,
+		&ux500_regulator_status_fops);
+	if (!rdebug.status_file)
+		goto exit_destroy_dir;
+
+	/* create "power-state-count" file */
+	rdebug.power_state_cnt_file = debugfs_create_file("power-state-count",
+		S_IRUGO, rdebug.dir, &pdev->dev,
+		&ux500_regulator_power_state_cnt_fops);
+	if (!rdebug.power_state_cnt_file)
+		goto exit_destroy_status;
+
+	rdebug.regulator_array = regulator_info;
+	rdebug.num_regulators = num_regulators;
+
+	rdebug.state_before_suspend = kzalloc(num_regulators, GFP_KERNEL);
+	if (!rdebug.state_before_suspend) {
+		dev_err(&pdev->dev,
+			"could not allocate memory for saving state\n");
+		goto exit_destroy_power_state;
+	}
+
+	rdebug.state_after_suspend = kzalloc(num_regulators, GFP_KERNEL);
+	if (!rdebug.state_after_suspend) {
+		dev_err(&pdev->dev,
+			"could not allocate memory for saving state\n");
+		goto exit_free;
+	}
+
+	dbx500_regulator_testcase(regulator_info, num_regulators);
+	return 0;
+
+exit_free:
+	kfree(rdebug.state_before_suspend);
+exit_destroy_power_state:
+	debugfs_remove(rdebug.power_state_cnt_file);
+exit_destroy_status:
+	debugfs_remove(rdebug.status_file);
+exit_destroy_dir:
+	debugfs_remove(rdebug.dir);
+exit_no_debugfs:
+	dev_err(&pdev->dev, "failed to create debugfs entries.\n");
+	return -ENOMEM;
+}
+
+int __devexit ux500_regulator_debug_exit(void)
+{
+	debugfs_remove_recursive(rdebug.dir);
+	kfree(rdebug.state_after_suspend);
+	kfree(rdebug.state_before_suspend);
+
+	return 0;
+}
+#endif

drivers/regulator/dbx500-prcmu.h

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Bengt Jonsson <bengt.jonsson@stericsson.com> for ST-Ericsson,
+ *	   Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ *
+ * License Terms: GNU General Public License v2
+ *
+ */
+
+#ifndef DBX500_REGULATOR_H
+#define DBX500_REGULATOR_H
+
+#include <linux/platform_device.h>
+
+/**
+ * struct dbx500_regulator_info - dbx500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @rdev: regulator device pointer
+ * @is_enabled: status of the regulator
+ * @epod_id: id for EPOD (power domain)
+ * @is_ramret: RAM retention switch for EPOD (power domain)
+ * @operating_point: operating point (only for vape, to be removed)
+ *
+ */
+struct dbx500_regulator_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	bool is_enabled;
+	u16 epod_id;
+	bool is_ramret;
+	bool exclude_from_power_state;
+	unsigned int operating_point;
+};
+
+void power_state_active_enable(void);
+int power_state_active_disable(void);
+
+
+#ifdef CONFIG_REGULATOR_DEBUG
+int ux500_regulator_debug_init(struct platform_device *pdev,
+			       struct dbx500_regulator_info *regulator_info,
+			       int num_regulators);
+
+int ux500_regulator_debug_exit(void);
+#else
+
+static inline int ux500_regulator_debug_init(struct platform_device *pdev,
+			     struct dbx500_regulator_info *regulator_info,
+			     int num_regulators)
+{
+	return 0;
+}
+
+static inline int ux500_regulator_debug_exit(void)
+{
+	return 0;
+}
+
+#endif
+#endif

drivers/regulator/fixed-helper.c

+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+
+struct fixed_regulator_data {
+	struct fixed_voltage_config cfg;
+	struct regulator_init_data init_data;
+	struct platform_device pdev;
+};
+
+static void regulator_fixed_release(struct device *dev)
+{
+	struct fixed_regulator_data *data = container_of(dev,
+			struct fixed_regulator_data, pdev.dev);
+	kfree(data);
+}
+
+/**
+ * regulator_register_fixed - register a no-op fixed regulator
+ * @name: supply name
+ * @id: platform device id
+ * @supplies: consumers for this regulator
+ * @num_supplies: number of consumers
+ */
+struct platform_device *regulator_register_fixed(int id,
+		struct regulator_consumer_supply *supplies, int num_supplies)
+{
+	struct fixed_regulator_data *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return NULL;
+
+	data->cfg.supply_name = "dummy";
+	data->cfg.microvolts = 0;
+	data->cfg.gpio = -EINVAL;
+	data->cfg.enabled_at_boot = 1;
+	data->cfg.init_data = &data->init_data;
+
+	data->init_data.constraints.always_on = 1;
+	data->init_data.consumer_supplies = supplies;
+	data->init_data.num_consumer_supplies = num_supplies;
+
+	data->pdev.name = "reg-fixed-voltage";
+	data->pdev.id = id;
+	data->pdev.dev.platform_data = &data->cfg;
+	data->pdev.dev.release = regulator_fixed_release;
+
+	platform_device_register(&data->pdev);
+
+	return &data->pdev;
+}

drivers/regulator/fixed.c

@@ -192,6 +192,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
 	drvdata->desc.ops = &fixed_voltage_ops;
+
+	if (config->microvolts)
 		drvdata->desc.n_voltages = 1;
 
 	drvdata->microvolts = config->microvolts;

drivers/regulator/isl6271a-regulator.c

@@ -63,23 +63,15 @@ static int isl6271a_set_voltage(struct regulator_dev *dev,
 				unsigned *selector)
 {
 	struct isl_pmic *pmic = rdev_get_drvdata(dev);
-	int vsel, err, data;
+	int err, data;
 
 	if (minuV < ISL6271A_VOLTAGE_MIN || minuV > ISL6271A_VOLTAGE_MAX)
 		return -EINVAL;
 	if (maxuV < ISL6271A_VOLTAGE_MIN || maxuV > ISL6271A_VOLTAGE_MAX)
 		return -EINVAL;
 
-	/* Align to 50000 mV */
-	vsel = minuV - (minuV % ISL6271A_VOLTAGE_STEP);
-
-	/* If the result fell out of [minuV,maxuV] range, put it back */
-	if (vsel < minuV)
-		vsel += ISL6271A_VOLTAGE_STEP;
-
-	/* Convert the microvolts to data for the chip */
-	data = (vsel - ISL6271A_VOLTAGE_MIN) / ISL6271A_VOLTAGE_STEP;
-
+	data = DIV_ROUND_UP(minuV - ISL6271A_VOLTAGE_MIN,
+			    ISL6271A_VOLTAGE_STEP);
 	*selector = data;
 
 	mutex_lock(&pmic->mtx);

drivers/regulator/max1586.c

@@ -76,8 +76,8 @@ static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,
 	if (min_uV < max1586->min_uV)
 		min_uV = max1586->min_uV;
 
-	*selector = ((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL +
-			range_uV - 1) / range_uV;
+	*selector = DIV_ROUND_UP((min_uV - max1586->min_uV) *
+				 MAX1586_V3_MAX_VSEL, range_uV);
 	if (max1586_v3_calc_voltage(max1586, *selector) > max_uV)
 		return -EINVAL;
 

drivers/regulator/max8649.c

@@ -101,8 +101,7 @@ static int max8649_set_voltage(struct regulator_dev *rdev,
 			min_uV, max_uV);
 		return -EINVAL;
 	}
-	data = (min_uV - MAX8649_DCDC_VMIN + MAX8649_DCDC_STEP - 1)
-		/ MAX8649_DCDC_STEP;
+	data = DIV_ROUND_UP(min_uV - MAX8649_DCDC_VMIN, MAX8649_DCDC_STEP);
 	mask = MAX8649_VOL_MASK;
 	*selector = data & mask;
 
@@ -270,7 +269,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 			ret);
 		goto out;
 	}
-	dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", ret);
+	dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", val);
 
 	/* enable VID0 & VID1 */
 	regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_VID_MASK, 0);

drivers/regulator/max8660.c

@@ -153,14 +153,15 @@ static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV,
 	if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV)
 		return -EINVAL;
 
-	selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1))
-			/ MAX8660_DCDC_STEP;
-	*s = selector;
+	selector = DIV_ROUND_UP(min_uV - MAX8660_DCDC_MIN_UV,
+				MAX8660_DCDC_STEP);
 
 	ret = max8660_dcdc_list(rdev, selector);
 	if (ret < 0 || ret > max_uV)
 		return -EINVAL;
 
+	*s = selector;
+
 	reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
 	ret = max8660_write(max8660, reg, 0, selector);
 	if (ret)
@@ -210,8 +211,9 @@ static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV,
 	if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV)
 		return -EINVAL;
 
-	selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1))
-			/ MAX8660_LDO5_STEP;
+	selector = DIV_ROUND_UP(min_uV - MAX8660_LDO5_MIN_UV,
+				MAX8660_LDO5_STEP);
+
 	ret = max8660_ldo5_list(rdev, selector);
 	if (ret < 0 || ret > max_uV)
 		return -EINVAL;
@@ -287,8 +289,8 @@ static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV,
 	if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV)
 		return -EINVAL;
 
-	selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1))
-			/ MAX8660_LDO67_STEP;
+	selector = DIV_ROUND_UP(min_uV - MAX8660_LDO67_MIN_UV,
+				MAX8660_LDO67_STEP);
 
 	ret = max8660_ldo67_list(rdev, selector);
 	if (ret < 0 || ret > max_uV)

drivers/regulator/max8925-regulator.c

@@ -73,7 +73,7 @@ static int max8925_set_voltage(struct regulator_dev *rdev,
 			min_uV, max_uV);
 		return -EINVAL;
 	}
-	data = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	data = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = data;
 	data <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
@@ -140,7 +140,7 @@ static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
 	if (uV < SD1_DVM_VMIN || uV > SD1_DVM_VMAX)
 		return -EINVAL;
 
-	data = (uV - SD1_DVM_VMIN + SD1_DVM_STEP - 1) / SD1_DVM_STEP;
+	data = DIV_ROUND_UP(uV - SD1_DVM_VMIN, SD1_DVM_STEP);
 	data <<= SD1_DVM_SHIFT;
 	mask = 3 << SD1_DVM_SHIFT;
 

drivers/regulator/max8997.c

@@ -130,15 +130,10 @@ static const struct voltage_map_desc *reg_voltage_map[] = {
 	[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
 };
 
-static inline int max8997_get_rid(struct regulator_dev *rdev)
-{
-	return rdev_get_id(rdev);
-}
-
 static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
 		unsigned int selector)
 {
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 
 	if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
 		switch (selector) {
@@ -161,7 +156,7 @@ static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
 static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
 		unsigned int selector)
 {
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 
 	if (rid != MAX8997_CHARGER_CV)
 		goto err;
@@ -184,7 +179,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
 		unsigned int selector)
 {
 	const struct voltage_map_desc *desc;
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	int val;
 
 	if (rid >= ARRAY_SIZE(reg_voltage_map) ||
@@ -205,7 +200,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
 static int max8997_get_enable_register(struct regulator_dev *rdev,
 		int *reg, int *mask, int *pattern)
 {
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 
 	switch (rid) {
 	case MAX8997_LDO1 ... MAX8997_LDO21:
@@ -325,7 +320,7 @@ static int max8997_reg_disable(struct regulator_dev *rdev)
 static int max8997_get_voltage_register(struct regulator_dev *rdev,
 		int *_reg, int *_shift, int *_mask)
 {
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	int reg, shift = 0, mask = 0x3f;
 
 	switch (rid) {
@@ -386,7 +381,7 @@ static int max8997_get_voltage(struct regulator_dev *rdev)
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
 	int reg, shift, mask, ret;
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	u8 val;
 
 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
@@ -446,7 +441,7 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	int lb, ub;
 	int reg, shift = 0, mask, ret = 0;
 	u8 val = 0x0;
@@ -503,7 +498,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 	struct i2c_client *i2c = max8997->iodev->i2c;
 	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	int reg, shift = 0, mask, ret;
 	int i;
 	u8 org;
@@ -564,7 +559,7 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev,
 		u8 new_val, int *best)
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	u8 *buckx_val[3];
 	bool buckx_gpiodvs[3];
 	int side_effect[8];
@@ -641,7 +636,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
 		int min_uV, int max_uV, unsigned *selector)
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	const struct voltage_map_desc *desc;
 	int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
 	bool gpio_dvs_mode = false;
@@ -724,7 +719,7 @@ static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 	int reg, shift = 0, mask, ret;
 	int i = 0;
 	u8 val;
@@ -766,7 +761,7 @@ static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
 	int ret, reg, mask, pattern;
-	int rid = max8997_get_rid(rdev);
+	int rid = rdev_get_id(rdev);
 
 	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
 	if (ret)
@@ -908,13 +903,13 @@ static struct regulator_desc regulators[] = {
 	},
 	regulator_desc_buck(7),
 	{
-		.name	= "EN32KHz AP",
+		.name	= "EN32KHz_AP",
 		.id	= MAX8997_EN32KHZ_AP,
 		.ops	= &max8997_fixedvolt_ops,
 		.type	= REGULATOR_VOLTAGE,
 		.owner	= THIS_MODULE,
 	}, {
-		.name	= "EN32KHz CP",
+		.name	= "EN32KHz_CP",
 		.id	= MAX8997_EN32KHZ_CP,
 		.ops	= &max8997_fixedvolt_ops,
 		.type	= REGULATOR_VOLTAGE,
@@ -938,7 +933,7 @@ static struct regulator_desc regulators[] = {
 		.type	= REGULATOR_VOLTAGE,
 		.owner	 = THIS_MODULE,
 	}, {
-		.name	= "CHARGER CV",
+		.name	= "CHARGER_CV",
 		.id	= MAX8997_CHARGER_CV,
 		.ops	= &max8997_fixedstate_ops,
 		.type	= REGULATOR_VOLTAGE,
@@ -950,7 +945,7 @@ static struct regulator_desc regulators[] = {
 		.type	= REGULATOR_CURRENT,
 		.owner	 = THIS_MODULE,
 	}, {
-		.name	= "CHARGER TOPOFF",
+		.name	= "CHARGER_TOPOFF",
 		.id	= MAX8997_CHARGER_TOPOFF,
 		.ops	= &max8997_charger_fixedstate_ops,
 		.type	= REGULATOR_CURRENT,

drivers/regulator/max8998.c

@@ -112,16 +112,11 @@ static const struct voltage_map_desc *ldo_voltage_map[] = {
 	&buck4_voltage_map_desc,	/* BUCK4 */
 };
 
-static inline int max8998_get_ldo(struct regulator_dev *rdev)
-{
-	return rdev_get_id(rdev);
-}
-
 static int max8998_list_voltage(struct regulator_dev *rdev,
 				unsigned int selector)
 {
 	const struct voltage_map_desc *desc;
-	int ldo = max8998_get_ldo(rdev);
+	int ldo = rdev_get_id(rdev);
 	int val;
 
 	if (ldo >= ARRAY_SIZE(ldo_voltage_map))
@@ -141,7 +136,7 @@ static int max8998_list_voltage(struct regulator_dev *rdev,
 static int max8998_get_enable_register(struct regulator_dev *rdev,
 					int *reg, int *shift)
 {
-	int ldo = max8998_get_ldo(rdev);
+	int ldo = rdev_get_id(rdev);
 
 	switch (ldo) {
 	case MAX8998_LDO2 ... MAX8998_LDO5:
@@ -222,7 +217,7 @@ static int max8998_ldo_disable(struct regulator_dev *rdev)
 static int max8998_get_voltage_register(struct regulator_dev *rdev,
 				int *_reg, int *_shift, int *_mask)
 {
-	int ldo = max8998_get_ldo(rdev);
+	int ldo = rdev_get_id(rdev);
 	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
 	int reg, shift = 0, mask = 0xff;
 
@@ -310,7 +305,7 @@ static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
 	struct i2c_client *i2c = max8998->iodev->i2c;
 	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
-	int ldo = max8998_get_ldo(rdev);
+	int ldo = rdev_get_id(rdev);
 	int reg, shift = 0, mask, ret;
 	int i = 0;
 
@@ -362,7 +357,7 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
 	struct i2c_client *i2c = max8998->iodev->i2c;
 	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
-	int buck = max8998_get_ldo(rdev);
+	int buck = rdev_get_id(rdev);
 	int reg, shift = 0, mask, ret;
 	int difference = 0, i = 0, j = 0, previous_vol = 0;
 	u8 val = 0;
@@ -829,7 +824,6 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		       buck12_voltage_map_desc.step*i
 		       < (pdata->buck2_voltage2 / 1000))
 			i++;
-		printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx);
 		max8998->buck2_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
 		if (ret)

drivers/regulator/mc13783-regulator.c

@@ -344,6 +344,9 @@ static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id);
 
+	if (!pdata)
+		return -EINVAL;
+
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv) +
 			pdata->num_regulators * sizeof(priv->regulators[0]),
 			GFP_KERNEL);

drivers/regulator/pcf50633-regulator.c

@@ -142,6 +142,7 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
 	case PCF50633_REGULATOR_LDO5:
 	case PCF50633_REGULATOR_LDO6:
 	case PCF50633_REGULATOR_HCLDO:
+	case PCF50633_REGULATOR_MEMLDO:
 		volt_bits = ldo_voltage_bits(millivolts);
 		break;
 	default:
@@ -175,6 +176,7 @@ static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id,
 	case PCF50633_REGULATOR_LDO5:
 	case PCF50633_REGULATOR_LDO6:
 	case PCF50633_REGULATOR_HCLDO:
+	case PCF50633_REGULATOR_MEMLDO:
 		millivolts = ldo_voltage_value(bits);
 		break;
 	default:
@@ -217,9 +219,6 @@ static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
 	case PCF50633_REGULATOR_AUTO:
 		index += 0x2f;
 		break;
-	case PCF50633_REGULATOR_HCLDO:
-		index += 0x01;
-		break;
 	default:
 		break;
 	}
@@ -288,27 +287,27 @@ static struct regulator_ops pcf50633_regulator_ops = {
 
 static struct regulator_desc regulators[] = {
 	[PCF50633_REGULATOR_AUTO] =
-		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 80),
+		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 81),
 	[PCF50633_REGULATOR_DOWN1] =
-		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 95),
+		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 96),
 	[PCF50633_REGULATOR_DOWN2] =
-		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 95),
+		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 96),
 	[PCF50633_REGULATOR_LDO1] =
-		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 27),
+		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 28),
 	[PCF50633_REGULATOR_LDO2] =
-		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 27),
+		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 28),
 	[PCF50633_REGULATOR_LDO3] =
-		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 27),
+		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 28),
 	[PCF50633_REGULATOR_LDO4] =
-		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 27),
+		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 28),
 	[PCF50633_REGULATOR_LDO5] =
-		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 27),
+		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 28),
 	[PCF50633_REGULATOR_LDO6] =
-		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 27),
+		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 28),
 	[PCF50633_REGULATOR_HCLDO] =
-		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 26),
+		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 28),
 	[PCF50633_REGULATOR_MEMLDO] =
-		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 0),
+		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 28),
 };
 
 static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)

drivers/regulator/tps65023-regulator.c

@@ -487,10 +487,6 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, tps);
 
-	/* Enable setting output voltage by I2C */
-	regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
-			TPS65023_REG_CTRL2_CORE_ADJ, TPS65023_REG_CTRL2_CORE_ADJ);
-
 	/* Enable setting output voltage by I2C */
 	regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
 			TPS65023_REG_CTRL2_CORE_ADJ, TPS65023_REG_CTRL2_CORE_ADJ);

drivers/regulator/tps6524x-regulator.c

@@ -108,9 +108,7 @@
 #define N_DCDC			3
 #define N_LDO			2
 #define N_SWITCH		2
-#define N_REGULATORS		(3 /* DCDC */ + \
-				 2 /* LDO */  + \
-				 2 /* switch */)
+#define N_REGULATORS		(N_DCDC + N_LDO + N_SWITCH)
 
 #define FIXED_ILIMSEL		BIT(0)
 #define FIXED_VOLTAGE		BIT(1)

drivers/regulator/tps6586x-regulator.c

@@ -383,7 +383,7 @@ static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
 	int id = pdev->id;
 	int err;
 
-	dev_dbg(&pdev->dev, "Probing reulator %d\n", id);
+	dev_dbg(&pdev->dev, "Probing regulator %d\n", id);
 
 	ri = find_regulator_info(id);
 	if (ri == NULL) {

drivers/regulator/wm8350-regulator.c

@@ -186,7 +186,7 @@ static int wm8350_isink_get_current(struct regulator_dev *rdev)
 		return 0;
 	}
 
-	return (isink_cur[val] + 50) / 100;
+	return DIV_ROUND_CLOSEST(isink_cur[val], 100);
 }
 
 /* turn on ISINK followed by DCDC */
@@ -1544,7 +1544,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
 		return -ENOMEM;
 	}
 
-	led->isink_consumer.dev = &pdev->dev;
+	led->isink_consumer.dev_name = dev_name(&pdev->dev);
 	led->isink_consumer.supply = "led_isink";
 	led->isink_init.num_consumer_supplies = 1;
 	led->isink_init.consumer_supplies = &led->isink_consumer;
@@ -1559,7 +1559,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
 		return ret;
 	}
 
-	led->dcdc_consumer.dev = &pdev->dev;
+	led->dcdc_consumer.dev_name = dev_name(&pdev->dev);
 	led->dcdc_consumer.supply = "led_vcc";
 	led->dcdc_init.num_consumer_supplies = 1;
 	led->dcdc_init.consumer_supplies = &led->dcdc_consumer;

drivers/regulator/wm8400-regulator.c

@@ -78,14 +78,14 @@ static int wm8400_ldo_set_voltage(struct regulator_dev *dev,
 
 	if (min_uV < 1700000) {
 		/* Steps of 50mV from 900mV;  */
-		val = (min_uV - 850001) / 50000;
+		val = DIV_ROUND_UP(min_uV - 900000, 50000);
 
 		if ((val * 50000) + 900000 > max_uV)
 			return -EINVAL;
 		BUG_ON((val * 50000) + 900000 < min_uV);
 	} else {
 		/* Steps of 100mV from 1700mV */
-		val = ((min_uV - 1600001) / 100000);
+		val = DIV_ROUND_UP(min_uV - 1700000, 100000);
 
 		if ((val * 100000) + 1700000 > max_uV)
 			return -EINVAL;
@@ -168,7 +168,7 @@ static int wm8400_dcdc_set_voltage(struct regulator_dev *dev,
 	if (min_uV < 850000)
 		return -EINVAL;
 
-	val = (min_uV - 825001) / 25000;
+	val = DIV_ROUND_UP(min_uV - 850000, 25000);
 
 	if (850000 + (25000 * val) > max_uV)
 		return -EINVAL;

drivers/regulator/wm8994-regulator.c

@@ -241,7 +241,7 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENODEV;
 
-	ldo = kzalloc(sizeof(struct wm8994_ldo), GFP_KERNEL);
+	ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm8994_ldo), GFP_KERNEL);
 	if (ldo == NULL) {
 		dev_err(&pdev->dev, "Unable to allocate private data\n");
 		return -ENOMEM;
@@ -285,7 +285,6 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
 	if (gpio_is_valid(ldo->enable))
 		gpio_free(ldo->enable);
 err:
-	kfree(ldo);
 	return ret;
 }
 
@@ -298,7 +297,6 @@ static __devexit int wm8994_ldo_remove(struct platform_device *pdev)
 	regulator_unregister(ldo->regulator);
 	if (gpio_is_valid(ldo->enable))
 		gpio_free(ldo->enable);
-	kfree(ldo);
 
 	return 0;
 }

include/linux/i2c/twl.h

@@ -712,6 +712,9 @@ struct twl4030_platform_data {
 	struct regulator_init_data		*vaux1;
 	struct regulator_init_data		*vaux2;
 	struct regulator_init_data		*vaux3;
+	struct regulator_init_data		*vdd1;
+	struct regulator_init_data		*vdd2;
+	struct regulator_init_data		*vdd3;
 	/* TWL4030 LDO regulators */
 	struct regulator_init_data		*vpll1;
 	struct regulator_init_data		*vpll2;
@@ -720,8 +723,6 @@ struct twl4030_platform_data {
 	struct regulator_init_data		*vsim;
 	struct regulator_init_data		*vaux4;
 	struct regulator_init_data		*vio;
-	struct regulator_init_data		*vdd1;
-	struct regulator_init_data		*vdd2;
 	struct regulator_init_data		*vintana1;
 	struct regulator_init_data		*vintana2;
 	struct regulator_init_data		*vintdig;
@@ -733,6 +734,8 @@ struct twl4030_platform_data {
 	struct regulator_init_data              *vcxio;
 	struct regulator_init_data              *vusb;
 	struct regulator_init_data		*clk32kg;
+	struct regulator_init_data              *v1v8;
+	struct regulator_init_data              *v2v1;
 	/* TWL6025 LDO regulators */
 	struct regulator_init_data		*ldo1;
 	struct regulator_init_data		*ldo2;
@@ -749,6 +752,13 @@ struct twl4030_platform_data {
 	struct regulator_init_data		*vio6025;
 };
 
+struct twl_regulator_driver_data {
+	int		(*set_voltage)(void *data, int target_uV);
+	int		(*get_voltage)(void *data);
+	void		*data;
+	unsigned long	features;
+};
+
 /*----------------------------------------------------------------------*/
 
 int twl4030_sih_setup(int module);

include/linux/mfd/tps65910.h

@@ -768,6 +768,12 @@
 /* Max number of TPS65910/11 regulators */
 #define TPS65910_NUM_REGS				13
 
+/* External sleep controls through EN1/EN2/EN3/SLEEP inputs */
+#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN1		0x1
+#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN2		0x2
+#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3		0x4
+#define TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP		0x8
+
 /**
  * struct tps65910_board
  * Board platform data may be used to initialize regulators.
@@ -779,6 +785,7 @@ struct tps65910_board {
 	int irq_base;
 	int vmbch_threshold;
 	int vmbch2_threshold;
+	unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
 	struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
 };
 

include/linux/regulator/driver.h

@@ -104,7 +104,7 @@ struct regulator_ops {
 	int (*disable) (struct regulator_dev *);
 	int (*is_enabled) (struct regulator_dev *);
 
-	/* get/set regulator operating mode (defined in regulator.h) */
+	/* get/set regulator operating mode (defined in consumer.h) */
 	int (*set_mode) (struct regulator_dev *, unsigned int mode);
 	unsigned int (*get_mode) (struct regulator_dev *);
 
@@ -135,7 +135,7 @@ struct regulator_ops {
 	int (*set_suspend_enable) (struct regulator_dev *);
 	int (*set_suspend_disable) (struct regulator_dev *);
 
-	/* set regulator suspend operating mode (defined in regulator.h) */
+	/* set regulator suspend operating mode (defined in consumer.h) */
 	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
 };
 
@@ -207,9 +207,7 @@ struct regulator_dev {
 
 	void *reg_data;		/* regulator_dev data */
 
-#ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
-#endif
 };
 
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,