Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits)
  USB: otg: fix module reinsert issue
  USB: handle zero-length usbfs submissions correctly
  USB: EHCI: report actual_length for iso transfers
  USB: option: remove unnecessary and erroneous code
  USB: cypress_m8: remove invalid Clear-Halt
  USB: musb_host: undo incorrect change in musb_advance_schedule()
  USB: fix LANGID=0 regression
  USB: serial: sierra driver id_table additions
  USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
  USB: fix race leading to a write after kfree in usbfs
  USB: Sierra: fix oops upon device close
  USB: option.c: add A-Link 3GU device id
  USB: Serial: Add support for Arkham Technology adapters
  USB: Fix option_ms regression in 2.6.31-rc2
  USB: gadget audio: select SND_PCM
  USB: ftdi: support NDI devices
  Revert USB: usbfs: deprecate and hide option for !embedded
  USB: usb.h: fix kernel-doc notation
  USB: RNDIS gadget, fix issues talking from PXA
  USB: serial: FTDI with product code FB80 and vendor id 0403
  ...

drivers/usb/class/cdc-acm.c

@@ -387,6 +387,7 @@ static void acm_rx_tasklet(unsigned long _acm)
 	struct acm_ru *rcv;
 	unsigned long flags;
 	unsigned char throttled;
+	struct usb_host_endpoint *ep;
 
 	dbg("Entering acm_rx_tasklet");
 
@@ -462,6 +463,15 @@ static void acm_rx_tasklet(unsigned long _acm)
 
 		rcv->buffer = buf;
 
+		ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
+				[usb_pipeendpoint(acm->rx_endpoint)];
+		if (usb_endpoint_xfer_int(&ep->desc))
+			usb_fill_int_urb(rcv->urb, acm->dev,
+					 acm->rx_endpoint,
+					 buf->base,
+					 acm->readsize,
+					 acm_read_bulk, rcv, ep->desc.bInterval);
+		else
 			usb_fill_bulk_urb(rcv->urb, acm->dev,
 					  acm->rx_endpoint,
 					  buf->base,
@@ -1227,6 +1237,11 @@ static int acm_probe(struct usb_interface *intf,
 			goto alloc_fail7;
 		}
 
+		if (usb_endpoint_xfer_int(epwrite))
+			usb_fill_int_urb(snd->urb, usb_dev,
+				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+				NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+		else
 			usb_fill_bulk_urb(snd->urb, usb_dev,
 				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
 				NULL, acm->writesize, acm_write_bulk, snd);

drivers/usb/class/usbtmc.c

@@ -751,7 +751,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
 {
 	struct device *dev = &data->usb_dev->dev;
 	char *buffer;
-	int rv;
+	int rv = 0;
 
 	buffer = kmalloc(0x18, GFP_KERNEL);
 	if (!buffer)
@@ -763,7 +763,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
 			     0, 0, buffer, 0x18, USBTMC_TIMEOUT);
 	if (rv < 0) {
 		dev_err(dev, "usb_control_msg returned %d\n", rv);
-		return rv;
+		goto err_out;
 	}
 
 	dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
@@ -773,7 +773,8 @@ static int get_capabilities(struct usbtmc_device_data *data)
 	dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
 	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
 		dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
-		return -EPERM;
+		rv = -EPERM;
+		goto err_out;
 	}
 
 	data->capabilities.interface_capabilities = buffer[4];
@@ -781,8 +782,9 @@ static int get_capabilities(struct usbtmc_device_data *data)
 	data->capabilities.usb488_interface_capabilities = buffer[14];
 	data->capabilities.usb488_device_capabilities = buffer[15];
 
+err_out:
 	kfree(buffer);
-	return 0;
+	return rv;
 }
 
 #define capability_attribute(name)					\

drivers/usb/core/Kconfig

@@ -28,7 +28,7 @@ comment "Miscellaneous USB options"
 	depends on USB
 
 config USB_DEVICEFS
-	bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+	bool "USB device filesystem (DEPRECATED)"
 	depends on USB
 	---help---
 	  If you say Y here (and to "/proc file system support" in the "File

drivers/usb/core/devices.c

@@ -136,17 +136,19 @@ static const struct class_info clas_info[] =
 	{USB_CLASS_AUDIO,		"audio"},
 	{USB_CLASS_COMM,		"comm."},
 	{USB_CLASS_HID,			"HID"},
-	{USB_CLASS_HUB,			"hub"},
 	{USB_CLASS_PHYSICAL,		"PID"},
+	{USB_CLASS_STILL_IMAGE,		"still"},
 	{USB_CLASS_PRINTER,		"print"},
 	{USB_CLASS_MASS_STORAGE,	"stor."},
+	{USB_CLASS_HUB,			"hub"},
 	{USB_CLASS_CDC_DATA,		"data"},
-	{USB_CLASS_APP_SPEC,		"app."},
-	{USB_CLASS_VENDOR_SPEC,		"vend."},
-	{USB_CLASS_STILL_IMAGE,		"still"},
 	{USB_CLASS_CSCID,		"scard"},
 	{USB_CLASS_CONTENT_SEC,		"c-sec"},
 	{USB_CLASS_VIDEO,		"video"},
+	{USB_CLASS_WIRELESS_CONTROLLER,	"wlcon"},
+	{USB_CLASS_MISC,		"misc"},
+	{USB_CLASS_APP_SPEC,		"app."},
+	{USB_CLASS_VENDOR_SPEC,		"vend."},
 	{-1,				"unk."}		/* leave as last */
 };
 

drivers/usb/core/devio.c

@@ -325,21 +325,34 @@ static void async_completed(struct urb *urb)
 	struct async *as = urb->context;
 	struct dev_state *ps = as->ps;
 	struct siginfo sinfo;
+	struct pid *pid = NULL;
+	uid_t uid = 0;
+	uid_t euid = 0;
+	u32 secid = 0;
+	int signr;
 
 	spin_lock(&ps->lock);
 	list_move_tail(&as->asynclist, &ps->async_completed);
-	spin_unlock(&ps->lock);
 	as->status = urb->status;
-	if (as->signr) {
+	signr = as->signr;
+	if (signr) {
 		sinfo.si_signo = as->signr;
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
 		sinfo.si_addr = as->userurb;
-		kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
-				      as->euid, as->secid);
+		pid = as->pid;
+		uid = as->uid;
+		euid = as->euid;
+		secid = as->secid;
 	}
 	snoop(&urb->dev->dev, "urb complete\n");
 	snoop_urb(urb, as->userurb);
+	spin_unlock(&ps->lock);
+
+	if (signr)
+		kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+				      euid, secid);
+
 	wake_up(&ps->wait);
 }
 
@@ -982,7 +995,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 				USBDEVFS_URB_ZERO_PACKET |
 				USBDEVFS_URB_NO_INTERRUPT))
 		return -EINVAL;
-	if (!uurb->buffer)
+	if (uurb->buffer_length > 0 && !uurb->buffer)
 		return -EINVAL;
 	if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
 	    (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
@@ -1038,11 +1051,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			is_in = 0;
 			uurb->endpoint &= ~USB_DIR_IN;
 		}
-		if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-				uurb->buffer, uurb->buffer_length)) {
-			kfree(dr);
-			return -EFAULT;
-		}
 		snoop(&ps->dev->dev, "control urb: bRequest=%02x "
 			"bRrequestType=%02x wValue=%04x "
 			"wIndex=%04x wLength=%04x\n",
@@ -1062,9 +1070,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		uurb->number_of_packets = 0;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
-		if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-				uurb->buffer, uurb->buffer_length))
-			return -EFAULT;
 		snoop(&ps->dev->dev, "bulk urb\n");
 		break;
 
@@ -1106,28 +1111,35 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			return -EINVAL;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
-		if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-				uurb->buffer, uurb->buffer_length))
-			return -EFAULT;
 		snoop(&ps->dev->dev, "interrupt urb\n");
 		break;
 
 	default:
 		return -EINVAL;
 	}
+	if (uurb->buffer_length > 0 &&
+			!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+				uurb->buffer, uurb->buffer_length)) {
+		kfree(isopkt);
+		kfree(dr);
+		return -EFAULT;
+	}
 	as = alloc_async(uurb->number_of_packets);
 	if (!as) {
 		kfree(isopkt);
 		kfree(dr);
 		return -ENOMEM;
 	}
-	as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
+	if (uurb->buffer_length > 0) {
+		as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+				GFP_KERNEL);
 		if (!as->urb->transfer_buffer) {
 			kfree(isopkt);
 			kfree(dr);
 			free_async(as);
 			return -ENOMEM;
 		}
+	}
 	as->urb->dev = ps->dev;
 	as->urb->pipe = (uurb->type << 30) |
 			__create_pipe(ps->dev, uurb->endpoint & 0xf) |
@@ -1169,7 +1181,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	kfree(isopkt);
 	as->ps = ps;
 	as->userurb = arg;
-	if (uurb->endpoint & USB_DIR_IN)
+	if (is_in && uurb->buffer_length > 0)
 		as->userbuffer = uurb->buffer;
 	else
 		as->userbuffer = NULL;
@@ -1179,9 +1191,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	as->uid = cred->uid;
 	as->euid = cred->euid;
 	security_task_getsecid(current, &as->secid);
-	if (!is_in) {
+	if (!is_in && uurb->buffer_length > 0) {
 		if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
-				as->urb->transfer_buffer_length)) {
+				uurb->buffer_length)) {
 			free_async(as);
 			return -EFAULT;
 		}
@@ -1231,22 +1243,22 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	if (as->userbuffer)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
 				 urb->transfer_buffer_length))
-			return -EFAULT;
+			goto err_out;
 	if (put_user(as->status, &userurb->status))
-		return -EFAULT;
+		goto err_out;
 	if (put_user(urb->actual_length, &userurb->actual_length))
-		return -EFAULT;
+		goto err_out;
 	if (put_user(urb->error_count, &userurb->error_count))
-		return -EFAULT;
+		goto err_out;
 
 	if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
 		for (i = 0; i < urb->number_of_packets; i++) {
 			if (put_user(urb->iso_frame_desc[i].actual_length,
 				     &userurb->iso_frame_desc[i].actual_length))
-				return -EFAULT;
+				goto err_out;
 			if (put_user(urb->iso_frame_desc[i].status,
 				     &userurb->iso_frame_desc[i].status))
-				return -EFAULT;
+				goto err_out;
 		}
 	}
 
@@ -1255,6 +1267,10 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	if (put_user(addr, (void __user * __user *)arg))
 		return -EFAULT;
 	return 0;
+
+err_out:
+	free_async(as);
+	return -EFAULT;
 }
 
 static struct async *reap_as(struct dev_state *ps)

drivers/usb/core/hcd.h

@@ -227,6 +227,10 @@ struct hc_driver {
 		/* has a port been handed over to a companion? */
 	int	(*port_handed_over)(struct usb_hcd *, int);
 
+		/* CLEAR_TT_BUFFER completion callback */
+	void	(*clear_tt_buffer_complete)(struct usb_hcd *,
+				struct usb_host_endpoint *);
+
 	/* xHCI specific functions */
 		/* Called by usb_alloc_dev to alloc HC device structures */
 	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);

drivers/usb/core/hub.c

@@ -450,10 +450,10 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
  * talking to TTs must queue control transfers (not just bulk and iso), so
  * both can talk to the same hub concurrently.
  */
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
 {
 	struct usb_hub		*hub =
-		container_of(work, struct usb_hub, tt.kevent);
+		container_of(work, struct usb_hub, tt.clear_work);
 	unsigned long		flags;
 	int			limit = 100;
 
@@ -462,6 +462,7 @@ static void hub_tt_kevent (struct work_struct *work)
 		struct list_head	*next;
 		struct usb_tt_clear	*clear;
 		struct usb_device	*hdev = hub->hdev;
+		const struct hc_driver	*drv;
 		int			status;
 
 		next = hub->tt.clear_list.next;
@@ -471,21 +472,25 @@ static void hub_tt_kevent (struct work_struct *work)
 		/* drop lock so HCD can concurrently report other TT errors */
 		spin_unlock_irqrestore (&hub->tt.lock, flags);
 		status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
-		spin_lock_irqsave (&hub->tt.lock, flags);
-
 		if (status)
 			dev_err (&hdev->dev,
 				"clear tt %d (%04x) error %d\n",
 				clear->tt, clear->devinfo, status);
+
+		/* Tell the HCD, even if the operation failed */
+		drv = clear->hcd->driver;
+		if (drv->clear_tt_buffer_complete)
+			(drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
 		kfree(clear);
+		spin_lock_irqsave(&hub->tt.lock, flags);
 	}
 	spin_unlock_irqrestore (&hub->tt.lock, flags);
 }
 
 /**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
  *
  * High speed HCDs use this to tell the hub driver that some split control or
  * bulk transaction failed in a way that requires clearing internal state of
@@ -495,8 +500,10 @@ static void hub_tt_kevent (struct work_struct *work)
  * It may not be possible for that hub to handle additional full (or low)
  * speed transactions until that state is fully cleared out.
  */
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
 {
+	struct usb_device	*udev = urb->dev;
+	int			pipe = urb->pipe;
 	struct usb_tt		*tt = udev->tt;
 	unsigned long		flags;
 	struct usb_tt_clear	*clear;
@@ -508,7 +515,7 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
 	if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
 		dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
 		/* FIXME recover somehow ... RESET_TT? */
-		return;
+		return -ENOMEM;
 	}
 
 	/* info that CLEAR_TT_BUFFER needs */
@@ -521,13 +528,18 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
 	if (usb_pipein (pipe))
 		clear->devinfo |= 1 << 15;
 
+	/* info for completion callback */
+	clear->hcd = bus_to_hcd(udev->bus);
+	clear->ep = urb->ep;
+
 	/* tell keventd to clear state for this TT */
 	spin_lock_irqsave (&tt->lock, flags);
 	list_add_tail (&clear->clear_list, &tt->clear_list);
-	schedule_work (&tt->kevent);
+	schedule_work(&tt->clear_work);
 	spin_unlock_irqrestore (&tt->lock, flags);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
 
 /* If do_delay is false, return the number of milliseconds the caller
  * needs to delay.
@@ -818,7 +830,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 	if (hub->has_indicators)
 		cancel_delayed_work_sync(&hub->leds);
 	if (hub->tt.hub)
-		cancel_work_sync(&hub->tt.kevent);
+		cancel_work_sync(&hub->tt.clear_work);
 }
 
 /* caller has locked the hub device */
@@ -935,7 +947,7 @@ static int hub_configure(struct usb_hub *hub,
 
 	spin_lock_init (&hub->tt.lock);
 	INIT_LIST_HEAD (&hub->tt.clear_list);
-	INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+	INIT_WORK(&hub->tt.clear_work, hub_tt_work);
 	switch (hdev->descriptor.bDeviceProtocol) {
 		case 0:
 			break;

drivers/usb/core/hub.h

@@ -188,16 +188,18 @@ struct usb_tt {
 	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
 	spinlock_t		lock;
 	struct list_head	clear_list;	/* of usb_tt_clear */
-	struct work_struct			kevent;
+	struct work_struct	clear_work;
 };
 
 struct usb_tt_clear {
 	struct list_head	clear_list;
 	unsigned		tt;
 	u16			devinfo;
+	struct usb_hcd		*hcd;
+	struct usb_host_endpoint	*ep;
 };
 
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
 extern void usb_ep0_reinit(struct usb_device *);
 
 #endif /* __LINUX_HUB_H */

drivers/usb/core/message.c

@@ -806,6 +806,48 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
 	return rc;
 }
 
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+	int err;
+
+	if (dev->have_langid)
+		return 0;
+
+	if (dev->string_langid < 0)
+		return -EPIPE;
+
+	err = usb_string_sub(dev, 0, 0, tbuf);
+
+	/* If the string was reported but is malformed, default to english
+	 * (0x0409) */
+	if (err == -ENODATA || (err > 0 && err < 4)) {
+		dev->string_langid = 0x0409;
+		dev->have_langid = 1;
+		dev_err(&dev->dev,
+			"string descriptor 0 malformed (err = %d), "
+			"defaulting to 0x%04x\n",
+				err, dev->string_langid);
+		return 0;
+	}
+
+	/* In case of all other errors, we assume the device is not able to
+	 * deal with strings at all. Set string_langid to -1 in order to
+	 * prevent any string to be retrieved from the device */
+	if (err < 0) {
+		dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+					err);
+		dev->string_langid = -1;
+		return -EPIPE;
+	}
+
+	/* always use the first langid listed */
+	dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+	dev->have_langid = 1;
+	dev_dbg(&dev->dev, "default language 0x%04x\n",
+				dev->string_langid);
+	return 0;
+}
+
 /**
  * usb_string - returns UTF-8 version of a string descriptor
  * @dev: the device whose string descriptor is being retrieved
@@ -837,24 +879,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 	if (!tbuf)
 		return -ENOMEM;
 
-	/* get langid for strings if it's not yet known */
-	if (!dev->have_langid) {
-		err = usb_string_sub(dev, 0, 0, tbuf);
-		if (err < 0) {
-			dev_err(&dev->dev,
-				"string descriptor 0 read error: %d\n",
-				err);
-		} else if (err < 4) {
-			dev_err(&dev->dev, "string descriptor 0 too short\n");
-		} else {
-			dev->string_langid = tbuf[2] | (tbuf[3] << 8);
-			/* always use the first langid listed */
-			dev_dbg(&dev->dev, "default language 0x%04x\n",
-				dev->string_langid);
-		}
-
-		dev->have_langid = 1;
-	}
+	err = usb_get_langid(dev, tbuf);
+	if (err < 0)
+		goto errout;
 
 	err = usb_string_sub(dev, dev->string_langid, index, tbuf);
 	if (err < 0)

drivers/usb/gadget/Kconfig

@@ -286,6 +286,27 @@ config USB_S3C_HSOTG
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_IMX
+	boolean "Freescale IMX USB Peripheral Controller"
+	depends on ARCH_MX1
+	help
+	   Freescale's IMX series include an integrated full speed
+	   USB 1.1 device controller.  The controller in the IMX series
+	   is register-compatible.
+
+	   It has Six fixed-function endpoints, as well as endpoint
+	   zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "imx_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_IMX
+	tristate
+	depends on USB_GADGET_IMX
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_S3C2410
 	boolean "S3C2410 USB Device Controller"
 	depends on ARCH_S3C2410
@@ -321,27 +342,6 @@ config USB_GADGET_MUSB_HDRC
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
 
-config USB_GADGET_IMX
-	boolean "Freescale IMX USB Peripheral Controller"
-	depends on ARCH_MX1
-	help
-	   Freescale's IMX series include an integrated full speed
-	   USB 1.1 device controller.  The controller in the IMX series
-	   is register-compatible.
-
-	   It has Six fixed-function endpoints, as well as endpoint
-	   zero (for control transfers).
-
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "imx_udc" and force all
-	   gadget drivers to also be dynamically linked.
-
-config USB_IMX
-	tristate
-	depends on USB_GADGET_IMX
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 config USB_GADGET_M66592
 	boolean "Renesas M66592 USB Peripheral Controller"
 	select USB_GADGET_DUALSPEED
@@ -604,6 +604,7 @@ config USB_ZERO_HNPTEST
 config USB_AUDIO
 	tristate "Audio Gadget (EXPERIMENTAL)"
 	depends on SND
+	select SND_PCM
 	help
 	  Gadget Audio is compatible with USB Audio Class specification 1.0.
 	  It will include at least one AudioControl interface, zero or more

drivers/usb/gadget/audio.c

@@ -42,9 +42,9 @@
  * Instead:  allocate your own, using normal USB-IF procedures.
  */
 
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM		0x0525	/* NetChip */
-#define AUDIO_PRODUCT_NUM		0xa4a1	/* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM		0x1d6b	/* Linux Foundation */
+#define AUDIO_PRODUCT_NUM		0x0101	/* Linux-USB Audio Gadget */
 
 /*-------------------------------------------------------------------------*/
 

drivers/usb/gadget/ether.c

@@ -293,15 +293,16 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		/* CDC Subset */
 		eth_config_driver.label = "CDC Subset/SAFE";
 
-		device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
-		device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
+		device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+		if (!has_rndis())
 			device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
 	}
 
 	if (has_rndis()) {
 		/* RNDIS plus ECM-or-Subset */
-		device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
-		device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+		device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
 		device_desc.bNumConfigurations = 2;
 	}
 

drivers/usb/gadget/pxa25x_udc.c

@@ -139,7 +139,7 @@ static int is_vbus_present(void)
 {
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 
-	if (mach->gpio_vbus) {
+	if (gpio_is_valid(mach->gpio_vbus)) {
 		int value = gpio_get_value(mach->gpio_vbus);
 
 		if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@ static void pullup_off(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 	int off_level = mach->gpio_pullup_inverted;
 
-	if (mach->gpio_pullup)
+	if (gpio_is_valid(mach->gpio_pullup))
 		gpio_set_value(mach->gpio_pullup, off_level);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@ static void pullup_on(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 	int on_level = !mach->gpio_pullup_inverted;
 
-	if (mach->gpio_pullup)
+	if (gpio_is_valid(mach->gpio_pullup))
 		gpio_set_value(mach->gpio_pullup, on_level);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
 	/* not all boards support pullup control */
-	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
 		return -EOPNOTSUPP;
 
 	udc->pullup = (is_active != 0);
@@ -1802,11 +1802,13 @@ pxa25x_udc_irq(int irq, void *_dev)
 					USIR0 |= tmp;
 					handled = 1;
 				}
+#ifndef	CONFIG_USB_PXA25X_SMALL
 				if (usir1 & tmp) {
 					handle_ep(&dev->ep[i+8]);
 					USIR1 |= tmp;
 					handled = 1;
 				}
+#endif
 			}
 		}
 
@@ -2160,7 +2162,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
 
-	if (dev->mach->gpio_vbus) {
+	if (gpio_is_valid(dev->mach->gpio_vbus)) {
 		if ((retval = gpio_request(dev->mach->gpio_vbus,
 				"pxa25x_udc GPIO VBUS"))) {
 			dev_dbg(&pdev->dev,
@@ -2173,7 +2175,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	} else
 		vbus_irq = 0;
 
-	if (dev->mach->gpio_pullup) {
+	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
 				"pca25x_udc GPIO PULLUP"))) {
 			dev_dbg(&pdev->dev,
@@ -2256,10 +2258,10 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 #endif
 	free_irq(irq, dev);
  err_irq1:
-	if (dev->mach->gpio_pullup)
+	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (dev->mach->gpio_vbus)
+	if (gpio_is_valid(dev->mach->gpio_vbus))
 		gpio_free(dev->mach->gpio_vbus);
  err_gpio_vbus:
 	clk_put(dev->clk);
@@ -2294,11 +2296,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 		free_irq(LUBBOCK_USB_IRQ, dev);
 	}
 #endif
-	if (dev->mach->gpio_vbus) {
+	if (gpio_is_valid(dev->mach->gpio_vbus)) {
 		free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
 		gpio_free(dev->mach->gpio_vbus);
 	}
-	if (dev->mach->gpio_pullup)
+	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
 
 	clk_put(dev->clk);
@@ -2329,7 +2331,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
 	struct pxa25x_udc	*udc = platform_get_drvdata(dev);
 	unsigned long flags;
 
-	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
 		WARNING("USB host won't detect disconnect!\n");
 	udc->suspended = 1;
 

drivers/usb/gadget/rndis.c

@@ -442,6 +442,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
 	case OID_802_3_MAC_OPTIONS:
 		pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
 		break;
 
 	/* ieee802.3 statistics OIDs (table 4-4) */

drivers/usb/host/Kconfig

@@ -181,26 +181,27 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on USB_OHCI_HCD && PPC_OF
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"

drivers/usb/host/ehci-au1xxx.c

@@ -113,6 +113,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 	.bus_resume		= ehci_bus_resume,
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)

drivers/usb/host/ehci-fsl.c

@@ -325,6 +325,8 @@ static const struct hc_driver ehci_fsl_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
 	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_fsl_drv_probe(struct platform_device *pdev)

drivers/usb/host/ehci-hcd.c

@@ -1003,6 +1003,8 @@ ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 		schedule_timeout_uninterruptible(1);
 		goto rescan;
 	case QH_STATE_IDLE:		/* fully unlinked */
+		if (qh->clearing_tt)
+			goto idle_timeout;
 		if (list_empty (&qh->qtd_list)) {
 			qh_put (qh);
 			break;
@@ -1030,12 +1032,14 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct ehci_qh		*qh;
 	int			eptype = usb_endpoint_type(&ep->desc);
+	int			epnum = usb_endpoint_num(&ep->desc);
+	int			is_out = usb_endpoint_dir_out(&ep->desc);
+	unsigned long		flags;
 
 	if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
 		return;
 
- rescan:
-	spin_lock_irq(&ehci->lock);
+	spin_lock_irqsave(&ehci->lock, flags);
 	qh = ep->hcpriv;
 
 	/* For Bulk and Interrupt endpoints we maintain the toggle state
@@ -1044,16 +1048,15 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 	 * the toggle bit in the QH.
 	 */
 	if (qh) {
+		usb_settoggle(qh->dev, epnum, is_out, 0);
 		if (!list_empty(&qh->qtd_list)) {
 			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
-		} else if (qh->qh_state == QH_STATE_IDLE) {
-			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
-		} else {
-			/* It's not safe to write into the overlay area
-			 * while the QH is active.  Unlink it first and
-			 * wait for the unlink to complete.
+		} else if (qh->qh_state == QH_STATE_LINKED) {
+
+			/* The toggle value in the QH can't be updated
+			 * while the QH is active.  Unlink it now;
+			 * re-linking will call qh_refresh().
 			 */
-			if (qh->qh_state == QH_STATE_LINKED) {
 			if (eptype == USB_ENDPOINT_XFER_BULK) {
 				unlink_async(ehci, qh);
 			} else {
@@ -1061,12 +1064,8 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 				(void) qh_schedule(ehci, qh);
 			}
 		}
-			spin_unlock_irq(&ehci->lock);
-			schedule_timeout_uninterruptible(1);
-			goto rescan;
 	}
-	}
-	spin_unlock_irq(&ehci->lock);
+	spin_unlock_irqrestore(&ehci->lock, flags);
 }
 
 static int ehci_get_frame (struct usb_hcd *hcd)

drivers/usb/host/ehci-ixp4xx.c

@@ -61,6 +61,8 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int ixp4xx_ehci_probe(struct platform_device *pdev)

drivers/usb/host/ehci-orion.c

@@ -165,6 +165,8 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
 	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static void __init

drivers/usb/host/ehci-pci.c

@@ -404,6 +404,8 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.bus_resume =		ehci_bus_resume,
 	.relinquish_port =	ehci_relinquish_port,
 	.port_handed_over =	ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 /*-------------------------------------------------------------------------*/

drivers/usb/host/ehci-ppc-of.c

@@ -79,6 +79,8 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 

drivers/usb/host/ehci-ps3.c

@@ -75,6 +75,8 @@ static const struct hc_driver ps3_ehci_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)

drivers/usb/host/ehci-q.c

@@ -93,6 +93,22 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 	qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
 	qh->hw_alt_next = EHCI_LIST_END(ehci);
 
+	/* Except for control endpoints, we make hardware maintain data
+	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+	 * ever clear it.
+	 */
+	if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+		unsigned	is_out, epnum;
+
+		is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+		epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+			usb_settoggle (qh->dev, epnum, is_out, 1);
+		}
+	}
+
 	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 	wmb ();
 	qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -123,6 +139,55 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 /*-------------------------------------------------------------------------*/
 
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct ehci_qh		*qh = ep->hcpriv;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+	qh->clearing_tt = 0;
+	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+			&& HC_IS_RUNNING(hcd->state))
+		qh_link_async(ehci, qh);
+	spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+		struct urb *urb, u32 token)
+{
+
+	/* If an async split transaction gets an error or is unlinked,
+	 * the TT buffer may be left in an indeterminate state.  We
+	 * have to clear the TT buffer.
+	 *
+	 * Note: this routine is never called for Isochronous transfers.
+	 */
+	if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+		struct usb_device *tt = urb->dev->tt->hub;
+		dev_dbg(&tt->dev,
+			"clear tt buffer port %d, a%d ep%d t%08x\n",
+			urb->dev->ttport, urb->dev->devnum,
+			usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+		if (!ehci_is_TDI(ehci)
+				|| urb->dev->tt->hub !=
+				   ehci_to_hcd(ehci)->self.root_hub) {
+			if (usb_hub_clear_tt_buffer(urb) == 0)
+				qh->clearing_tt = 1;
+		} else {
+
+			/* REVISIT ARC-derived cores don't clear the root
+			 * hub TT buffer in this way...
+			 */
+		}
+	}
+}
+
 static int qtd_copy_status (
 	struct ehci_hcd *ehci,
 	struct urb *urb,
@@ -149,6 +214,14 @@ static int qtd_copy_status (
 		if (token & QTD_STS_BABBLE) {
 			/* FIXME "must" disable babbling device's port too */
 			status = -EOVERFLOW;
+		/* CERR nonzero + halt --> stall */
+		} else if (QTD_CERR(token)) {
+			status = -EPIPE;
+
+		/* In theory, more than one of the following bits can be set
+		 * since they are sticky and the transaction is retried.
+		 * Which to test first is rather arbitrary.
+		 */
 		} else if (token & QTD_STS_MMF) {
 			/* fs/ls interrupt xfer missed the complete-split */
 			status = -EPROTO;
@@ -157,21 +230,15 @@ static int qtd_copy_status (
 				? -ENOSR  /* hc couldn't read data */
 				: -ECOMM; /* hc couldn't write data */
 		} else if (token & QTD_STS_XACT) {
-			/* timeout, bad crc, wrong PID, etc; retried */
-			if (QTD_CERR (token))
-				status = -EPIPE;
-			else {
-				ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
+			/* timeout, bad CRC, wrong PID, etc */
+			ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
 				urb->dev->devpath,
-					usb_pipeendpoint (urb->pipe),
-					usb_pipein (urb->pipe) ? "in" : "out");
+				usb_pipeendpoint(urb->pipe),
+				usb_pipein(urb->pipe) ? "in" : "out");
 			status = -EPROTO;
-			}
-		/* CERR nonzero + no errors + halt --> stall */
-		} else if (QTD_CERR (token))
-			status = -EPIPE;
-		else	/* unknown */
+		} else {	/* unknown */
 			status = -EPROTO;
+		}
 
 		ehci_vdbg (ehci,
 			"dev%d ep%d%s qtd token %08x --> status %d\n",
@@ -179,28 +246,6 @@ static int qtd_copy_status (
 			usb_pipeendpoint (urb->pipe),
 			usb_pipein (urb->pipe) ? "in" : "out",
 			token, status);
-
-		/* if async CSPLIT failed, try cleaning out the TT buffer */
-		if (status != -EPIPE
-				&& urb->dev->tt
-				&& !usb_pipeint(urb->pipe)
-				&& ((token & QTD_STS_MMF) != 0
-					|| QTD_CERR(token) == 0)
-				&& (!ehci_is_TDI(ehci)
-			                || urb->dev->tt->hub !=
-					   ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
-			struct usb_device *tt = urb->dev->tt->hub;
-			dev_dbg (&tt->dev,
-				"clear tt buffer port %d, a%d ep%d t%08x\n",
-				urb->dev->ttport, urb->dev->devnum,
-				usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
-			/* REVISIT ARC-derived cores don't clear the root
-			 * hub TT buffer in this way...
-			 */
-			usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
-		}
 	}
 
 	return status;
@@ -391,9 +436,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* qh unlinked; token in overlay may be most current */
 			if (state == QH_STATE_IDLE
 					&& cpu_to_hc32(ehci, qtd->qtd_dma)
-						== qh->hw_current)
+						== qh->hw_current) {
 				token = hc32_to_cpu(ehci, qh->hw_token);
 
+				/* An unlink may leave an incomplete
+				 * async transaction in the TT buffer.
+				 * We have to clear it.
+				 */
+				ehci_clear_tt_buffer(ehci, qh, urb, token);
+			}
+
 			/* force halt for unlinked or blocked qh, so we'll
 			 * patch the qh later and so that completions can't
 			 * activate it while we "know" it's stopped.
@@ -419,6 +471,13 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 					&& (qtd->hw_alt_next
 						& EHCI_LIST_END(ehci)))
 				last_status = -EINPROGRESS;
+
+			/* As part of low/full-speed endpoint-halt processing
+			 * we must clear the TT buffer (11.17.5).
+			 */
+			if (unlikely(last_status != -EINPROGRESS &&
+					last_status != -EREMOTEIO))
+				ehci_clear_tt_buffer(ehci, qh, urb, token);
 		}
 
 		/* if we're removing something not at the queue head,
@@ -834,6 +893,7 @@ qh_make (
 	qh->qh_state = QH_STATE_IDLE;
 	qh->hw_info1 = cpu_to_hc32(ehci, info1);
 	qh->hw_info2 = cpu_to_hc32(ehci, info2);
+	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 	qh_refresh (ehci, qh);
 	return qh;
 }
@@ -847,6 +907,10 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	__hc32		dma = QH_NEXT(ehci, qh->qh_dma);
 	struct ehci_qh	*head;
 
+	/* Don't link a QH if there's a Clear-TT-Buffer pending */
+	if (unlikely(qh->clearing_tt))
+		return;
+
 	/* (re)start the async schedule? */
 	head = ehci->async;
 	timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -864,7 +928,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 	}
 
-	/* clear halt and maybe recover from silicon quirk */
+	/* clear halt and/or toggle; and maybe recover from silicon quirk */
 	if (qh->qh_state == QH_STATE_IDLE)
 		qh_refresh (ehci, qh);
 

drivers/usb/host/ehci-sched.c

@@ -1619,11 +1619,14 @@ itd_complete (
 				desc->status = -EPROTO;
 
 			/* HC need not update length with this error */
-			if (!(t & EHCI_ISOC_BABBLE))
-				desc->actual_length = EHCI_ITD_LENGTH (t);
+			if (!(t & EHCI_ISOC_BABBLE)) {
+				desc->actual_length = EHCI_ITD_LENGTH(t);
+				urb->actual_length += desc->actual_length;
+			}
 		} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
 			desc->status = 0;
-			desc->actual_length = EHCI_ITD_LENGTH (t);
+			desc->actual_length = EHCI_ITD_LENGTH(t);
+			urb->actual_length += desc->actual_length;
 		} else {
 			/* URB was too late */
 			desc->status = -EXDEV;
@@ -2014,7 +2017,8 @@ sitd_complete (
 			desc->status = -EPROTO;
 	} else {
 		desc->status = 0;
-		desc->actual_length = desc->length - SITD_LENGTH (t);
+		desc->actual_length = desc->length - SITD_LENGTH(t);
+		urb->actual_length += desc->actual_length;
 	}
 	stream->depth -= stream->interval << 3;
 

drivers/usb/host/ehci.h

@@ -354,7 +354,9 @@ struct ehci_qh {
 	unsigned short		period;		/* polling interval */
 	unsigned short		start;		/* where polling starts */
 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
+
 	struct usb_device	*dev;		/* access to TT */
+	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
 } __attribute__ ((aligned (32)));
 
 /*-------------------------------------------------------------------------*/

drivers/usb/host/fhci-sched.c

@@ -576,9 +576,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
 			out_be16(&usb->fhci->regs->usb_event,
 				 usb->saved_msk);
 		} else if (usb->port_status == FHCI_PORT_DISABLED) {
-			if (fhci_ioports_check_bus_state(fhci) == 1 &&
-					usb->port_status != FHCI_PORT_LOW &&
-					usb->port_status != FHCI_PORT_FULL)
+			if (fhci_ioports_check_bus_state(fhci) == 1)
 				fhci_device_connected_interrupt(fhci);
 		}
 		usb_er &= ~USB_E_RESET_MASK;
@@ -605,9 +603,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
 	}
 
 	if (usb_er & USB_E_IDLE_MASK) {
-		if (usb->port_status == FHCI_PORT_DISABLED &&
-				usb->port_status != FHCI_PORT_LOW &&
-				usb->port_status != FHCI_PORT_FULL) {
+		if (usb->port_status == FHCI_PORT_DISABLED) {
 			usb_er &= ~USB_E_RESET_MASK;
 			fhci_device_connected_interrupt(fhci);
 		} else if (usb->port_status ==

drivers/usb/host/isp1760-if.c

@@ -361,7 +361,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev)
 
 static struct platform_driver isp1760_plat_driver = {
 	.probe	= isp1760_plat_probe,
-	.remove	= isp1760_plat_remove,
+	.remove	= __devexit_p(isp1760_plat_remove),
 	.driver	= {
 		.name	= "isp1760",
 	},

drivers/usb/musb/davinci.c

@@ -35,13 +35,14 @@
 #include <mach/hardware.h>
 #include <mach/memory.h>
 #include <mach/gpio.h>
+#include <mach/cputype.h>
 
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV		87
+#define GPIO_nVBUS_DRV		144
 #endif
 
 #include "davinci.h"
@@ -329,7 +330,6 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (is_host_enabled(musb) && drvvbus) {
-			musb->is_active = 1;
 			MUSB_HST_MODE(musb);
 			musb->xceiv->default_a = 1;
 			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
 		}
 
-		/* NOTE:  this must complete poweron within 100 msec */
+		/* NOTE:  this must complete poweron within 100 msec
+		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+		 */
 		davinci_source_power(musb, drvvbus, 0);
 		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@ int __init musb_platform_init(struct musb *musb)
 		__raw_writel(phy_ctrl, USB_PHY_CTRL);
 	}
 
+	/* On dm355, the default-A state machine needs DRVVBUS control.
+	 * If we won't be a host, there's no need to turn it on.
+	 */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		if (is_host_enabled(musb)) {
+			deepsleep &= ~DRVVBUS_OVERRIDE;
+		} else {
+			deepsleep &= ~DRVVBUS_FORCE;
+			deepsleep |= DRVVBUS_OVERRIDE;
+		}
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
 	/* reset the controller */
 	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
 
@@ -437,6 +454,15 @@ int musb_platform_exit(struct musb *musb)
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
 
+	/* force VBUS off */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		deepsleep &= ~DRVVBUS_FORCE;
+		deepsleep |= DRVVBUS_OVERRIDE;
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
 	davinci_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */

drivers/usb/musb/musb_host.c

@@ -373,7 +373,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 		musb_save_toggle(qh, is_in, urb);
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		if (urb->error_count)
+		if (status == 0 && urb->error_count)
 			status = -EXDEV;
 		break;
 	}
@@ -2235,13 +2235,30 @@ static void musb_h_stop(struct usb_hcd *hcd)
 static int musb_bus_suspend(struct usb_hcd *hcd)
 {
 	struct musb	*musb = hcd_to_musb(hcd);
+	u8		devctl;
 
-	if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+	if (!is_host_active(musb))
 		return 0;
 
-	if (is_host_active(musb) && musb->is_active) {
-		WARNING("trying to suspend as %s is_active=%i\n",
-			otg_state_string(musb), musb->is_active);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_SUSPEND:
+		return 0;
+	case OTG_STATE_A_WAIT_VRISE:
+		/* ID could be grounded even if there's no device
+		 * on the other end of the cable.  NOTE that the
+		 * A_WAIT_VRISE timers are messy with MUSB...
+		 */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	default:
+		break;
+	}
+
+	if (musb->is_active) {
+		WARNING("trying to suspend as %s while active\n",
+				otg_state_string(musb));
 		return -EBUSY;
 	} else
 		return 0;

drivers/usb/otg/Kconfig

@@ -59,18 +59,4 @@ config NOP_USB_XCEIV
 	 built-in with usb ip or which are autonomous and doesn't require any
 	 phy programming such as ISP1x04 etc.
 
-config USB_LANGWELL_OTG
-	tristate "Intel Langwell USB OTG dual-role support"
-	depends on USB && MRST
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Say Y here if you want to build Intel Langwell USB OTG
-	  transciever driver in kernel. This driver implements role
-	  switch between EHCI host driver and Langwell USB OTG
-	  client driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called langwell_otg.
-
 endif # USB || OTG

drivers/usb/otg/Makefile

@@ -9,7 +9,6 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG

drivers/usb/otg/nop-usb-xceiv.c

@@ -53,6 +53,7 @@ EXPORT_SYMBOL(usb_nop_xceiv_register);
 void usb_nop_xceiv_unregister(void)
 {
 	platform_device_unregister(pd);
+	pd = NULL;
 }
 EXPORT_SYMBOL(usb_nop_xceiv_unregister);
 

drivers/usb/serial/console.c

@@ -169,9 +169,11 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree(tty);
 		}
 	}
-	/* So we know not to kill the hardware on a hangup on this
-	   port. We have also bumped the use count by one so it won't go
-	   idle */
+	/* Now that any required fake tty operations are completed restore
+	 * the tty port count */
+	--port->port.count;
+	/* The console is special in terms of closing the device so
+	 * indicate this port is now acting as a system console. */
 	port->console = 1;
 	retval = 0;
 
@@ -204,7 +206,7 @@ static void usb_console_write(struct console *co,
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	if (!port->port.count) {
+	if (!port->console) {
 		dbg("%s - port not opened", __func__);
 		return;
 	}
@@ -300,8 +302,7 @@ void usb_serial_console_exit(void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-		if (usbcons_info.port->port.count)
-			usbcons_info.port->port.count--;
+		usbcons_info.port->console = 0;
 		usbcons_info.port = NULL;
 	}
 }

drivers/usb/serial/cp210x.c

@@ -67,6 +67,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
 	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+	{ USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */

drivers/usb/serial/cypress_m8.c

@@ -1228,8 +1228,8 @@ static void cypress_read_int_callback(struct urb *urb)
 		/* precursor to disconnect so just go away */
 		return;
 	case -EPIPE:
-		usb_clear_halt(port->serial->dev, 0x81);
-		break;
+		/* Can't call usb_clear_halt while in_interrupt */
+		/* FALLS THROUGH */
 	default:
 		/* something ugly is going on... */
 		dev_err(&urb->dev->dev,

drivers/usb/serial/ftdi_sio.c

@@ -108,6 +108,7 @@ struct ftdi_sio_quirk {
 
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int   ftdi_NDI_device_setup(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -119,6 +120,10 @@ static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
 	.probe  = ftdi_mtxorb_hack_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+	.probe	= ftdi_NDI_device_setup,
+};
+
 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
 	.port_probe = ftdi_USB_UIRT_setup,
 };
@@ -192,6 +197,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -580,6 +586,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
 	{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
 	{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
 	{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
@@ -645,6 +654,16 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
@@ -661,6 +680,8 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
@@ -668,7 +689,6 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
 	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
-	{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
 	{ USB_DEVICE(ATMEL_VID, STK541_PID) },
 	{ USB_DEVICE(DE_VID, STB_PID) },
 	{ USB_DEVICE(DE_VID, WHT_PID) },
@@ -1024,6 +1044,16 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 	case FT2232C: /* FT2232C chip */
 	case FT232RL:
 		if (baud <= 3000000) {
+			__u16 product_id = le16_to_cpu(
+				port->serial->dev->descriptor.idProduct);
+			if (((FTDI_NDI_HUC_PID == product_id) ||
+			     (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+			     (FTDI_NDI_FUTURE_2_PID == product_id) ||
+			     (FTDI_NDI_FUTURE_3_PID == product_id) ||
+			     (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+			    (baud == 19200)) {
+				baud = 1200000;
+			}
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
 			dbg("%s - Baud rate too high!", __func__);
@@ -1554,6 +1584,39 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 	priv->force_rtscts = 1;
 } /* ftdi_HE_TIRA1_setup */
 
+/*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+	int latency = ndi_latency_timer;
+	int rv = 0;
+	char buf[1];
+
+	if (latency == 0)
+		latency = 1;
+	if (latency > 99)
+		latency = 99;
+
+	dbg("%s setting NDI device latency to %d", __func__, latency);
+	dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+	rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+				FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+				latency, 0, buf, 0, WDR_TIMEOUT);
+	return 0;
+}
+
 /*
  * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
  * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
@@ -2623,3 +2686,5 @@ MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified product ID");
 
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");

drivers/usb/serial/ftdi_sio.h

@@ -506,6 +506,7 @@
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG */
 #define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
 #define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
 #define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
@@ -614,6 +615,9 @@
 #define FTDI_CCSICDU20_0_PID    0xF9D0
 #define FTDI_CCSICDU40_1_PID    0xF9D1
 #define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
 
 /* Inside Accesso contactless reader (http://www.insidefr.com) */
 #define INSIDE_ACCESSO		0xFAD0
@@ -735,6 +739,15 @@
 /* Pyramid Computer GmbH */
 #define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
 
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
+
 /*
  * Posiflex inc retail equipment (http://www.posiflex.com.tw)
  */
@@ -848,9 +861,6 @@
 #define TML_VID			0x1B91	/* Vendor ID */
 #define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
 
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID        0xDA70
-
 /* Propox devices */
 #define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
 
@@ -934,6 +944,8 @@
 #define MARVELL_VID		0x9e88
 #define MARVELL_SHEEVAPLUG_PID	0x9e8f
 
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ

drivers/usb/serial/option.c

@@ -206,6 +206,7 @@ static int  option_resume(struct usb_serial *serial);
 #define NOVATELWIRELESS_PRODUCT_MC950D		0x4400
 #define NOVATELWIRELESS_PRODUCT_U727		0x5010
 #define NOVATELWIRELESS_PRODUCT_MC760		0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760		0x6002
 
 /* FUTURE NOVATEL PRODUCTS */
 #define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED	0X6001
@@ -307,11 +308,20 @@ static int  option_resume(struct usb_serial *serial);
 #define DLINK_VENDOR_ID				0x1186
 #define DLINK_PRODUCT_DWM_652			0x3e04
 
+#define QISDA_VENDOR_ID				0x1da5
+#define QISDA_PRODUCT_H21_4512			0x4512
+#define QISDA_PRODUCT_H21_4523			0x4523
+#define QISDA_PRODUCT_H20_4515			0x4515
+#define QISDA_PRODUCT_H20_4519			0x4519
+
 
 /* TOSHIBA PRODUCTS */
 #define TOSHIBA_VENDOR_ID			0x0930
 #define TOSHIBA_PRODUCT_HSDPA_MINICARD		0x1302
 
+#define ALINK_VENDOR_ID				0x1e0e
+#define ALINK_PRODUCT_3GU			0x9200
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -430,6 +440,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -529,8 +540,13 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
-	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -732,7 +748,6 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 		memcpy(this_urb->transfer_buffer, buf, todo);
 		this_urb->transfer_buffer_length = todo;
 
-		this_urb->dev = port->serial->dev;
 		err = usb_submit_urb(this_urb, GFP_ATOMIC);
 		if (err) {
 			dbg("usb_submit_urb %p (write bulk) failed "
@@ -860,7 +875,6 @@ static void option_instat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving IRQ data */
 	if (status != -ESHUTDOWN && status != -ENOENT) {
-		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
 			dbg("%s: resubmit intr urb failed. (%d)",
@@ -921,23 +935,11 @@ static int option_open(struct tty_struct *tty,
 
 	dbg("%s", __func__);
 
-	/* Reset low level data toggle and start reading from endpoints */
+	/* Start reading from the IN endpoint */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
 		if (!urb)
 			continue;
-		if (urb->dev != serial->dev) {
-			dbg("%s: dev %p != %p", __func__,
-				urb->dev, serial->dev);
-			continue;
-		}
-
-		/*
-		 * make sure endpoint data toggle is synchronized with the
-		 * device
-		 */
-		usb_clear_halt(urb->dev, urb->pipe);
-
 		err = usb_submit_urb(urb, GFP_KERNEL);
 		if (err) {
 			dbg("%s: submit urb %d failed (%d) %d",
@@ -946,16 +948,6 @@ static int option_open(struct tty_struct *tty,
 		}
 	}
 
-	/* Reset low level data toggle on out endpoints */
-	for (i = 0; i < N_OUT_URB; i++) {
-		urb = portdata->out_urbs[i];
-		if (!urb)
-			continue;
-		urb->dev = serial->dev;
-		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-				usb_pipeout(urb->pipe), 0); */
-	}
-
 	option_send_setup(port);
 
 	return 0;
@@ -1218,7 +1210,6 @@ static int option_resume(struct usb_serial *serial)
 			dbg("%s: No interrupt URB for port %d\n", __func__, i);
 			continue;
 		}
-		port->interrupt_in_urb->dev = serial->dev;
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
 		if (err < 0) {

drivers/usb/serial/pl2303.c

@@ -94,6 +94,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -122,3 +122,7 @@
 /* Hewlett-Packard LD220-HP POS Pole Display */
 #define HP_VENDOR_ID		0x03f0
 #define HP_LD220_PRODUCT_ID	0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID	0x04b8
+#define CRESSI_EDY_PRODUCT_ID	0x0521

drivers/usb/serial/sierra.c

@@ -181,35 +181,50 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 };
 
 static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
+	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
+
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
-	{ USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
-	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0022) },	/* Sierra Wireless EM5725 */
+	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
+	{ USB_DEVICE(0x1199, 0x0224) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
 	/* Sierra Wireless C597 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
-	 /* Sierra Wireless Device */
+	/* Sierra Wireless T598 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
-	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
-	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
-	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+	{ USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
-	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6805) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6808) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6809) },	/* Sierra Wireless MC8765 */
 	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 & AC 875U */
-	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Lenovo) */
+	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
-	{ USB_DEVICE(0x03f0, 0x1e1d) },	/* HP hs2300 a.k.a MC8775 */
+	{ USB_DEVICE(0x1199, 0x6816) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
+	{ USB_DEVICE(0x1199, 0x6822) },	/* Sierra Wireless AirCard 875E */
 	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x6834) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6835) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x6838) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6839) },	/* Sierra Wireless MC8781 */
 	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
 	/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
@@ -227,16 +242,13 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
 	/* Sierra Wireless C885 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
-	/* Sierra Wireless Device */
+	/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
-	/* Sierra Wireless Device */
+	/* Sierra Wireless C22/C33 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
-	/* Sierra Wireless Device */
+	/* Sierra Wireless HSPA Non-Composite Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
-	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
-	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+	{ USB_DEVICE(0x1199, 0x6893) },	/* Sierra Wireless Device */
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
@@ -814,7 +826,7 @@ static int sierra_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
 {
 	int i;
 	struct usb_serial_port *port;
@@ -830,7 +842,6 @@ static void sierra_disconnect(struct usb_serial *serial)
 		if (!portdata)
 			continue;
 		kfree(portdata);
-		usb_set_serial_port_data(port, NULL);
 	}
 }
 
@@ -853,7 +864,7 @@ static struct usb_serial_driver sierra_device = {
 	.tiocmget          = sierra_tiocmget,
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
-	.disconnect        = sierra_disconnect,
+	.release           = sierra_release,
 	.read_int_callback = sierra_instat_callback,
 };
 

drivers/usb/serial/ti_usb_3410_5052.c

@@ -191,7 +191,6 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
-	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -1658,7 +1657,7 @@ static int ti_do_download(struct usb_device *dev, int pipe,
 	u8 cs = 0;
 	int done;
 	struct ti_firmware_header *header;
-	int status;
+	int status = 0;
 	int len;
 
 	for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)

drivers/usb/serial/usb-serial.c

@@ -221,7 +221,8 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	tty->driver_data = port;
 	tty_port_tty_set(&port->port, tty);
 
-	if (port->port.count == 1) {
+	/* If the console is attached, the device is already open */
+	if (port->port.count == 1 && !port->console) {
 
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,

drivers/usb/storage/option_ms.c

@@ -118,6 +118,9 @@ static int option_inquiry(struct us_data *us)
 
 	result = memcmp(buffer+8, "Option", 6);
 
+	if (result != 0)
+		result = memcmp(buffer+8, "ZCOPTION", 8);
+
 	/* Read the CSW */
 	usb_stor_bulk_transfer_buf(us,
 			us->recv_bulk_pipe,

include/linux/usb.h

@@ -888,8 +888,6 @@ struct usb_driver {
  * struct usb_device_driver - identifies USB device driver to usbcore
  * @name: The driver name should be unique among USB drivers,
  *	and should normally be the same as the module name.
- * @nodename: Callback to provide a naming hint for a possible
- *	device node to create.
  * @probe: Called to see if the driver is willing to manage a particular
  *	device.  If it is, probe returns zero and uses dev_set_drvdata()
  *	to associate driver-specific data with the device.  If unwilling
@@ -924,6 +922,8 @@ extern struct bus_type usb_bus_type;
 /**
  * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
  * @name: the usb class device name for this driver.  Will show up in sysfs.
+ * @nodename: Callback to provide a naming hint for a possible
+ *	device node to create.
  * @fops: pointer to the struct file_operations of this driver.
  * @minor_base: the start of the minor range for this driver.
  *
@@ -1046,6 +1046,8 @@ typedef void (*usb_complete_t)(struct urb *);
  *	the device driver is saying that it provided this DMA address,
  *	which the host controller driver should use in preference to the
  *	transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
  * @transfer_buffer_length: How big is transfer_buffer.  The transfer may
  *	be broken up into chunks according to the current maximum packet
  *	size for the endpoint, which is a function of the configuration

include/linux/usb/langwell_otg.h

-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H__
-#define __LANGWELL_OTG_H__
-
-/* notify transceiver driver about OTG events */
-extern void langwell_update_transceiver(void);
-/* HCD register bus driver */
-extern int langwell_register_host(struct pci_driver *host_driver);
-/* HCD unregister bus driver */
-extern void langwell_unregister_host(struct pci_driver *host_driver);
-/* DCD register bus driver */
-extern int langwell_register_peripheral(struct pci_driver *client_driver);
-/* DCD unregister bus driver */
-extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
-/* No silent failure, output warning message */
-extern void langwell_otg_nsf_msg(unsigned long message);
-
-#define CI_USBCMD		0x30
-#	define USBCMD_RST		BIT(1)
-#	define USBCMD_RS		BIT(0)
-#define CI_USBSTS		0x34
-#	define USBSTS_SLI		BIT(8)
-#	define USBSTS_URI		BIT(6)
-#	define USBSTS_PCI		BIT(2)
-#define CI_PORTSC1		0x74
-#	define PORTSC_PP		BIT(12)
-#	define PORTSC_LS		(BIT(11) | BIT(10))
-#	define PORTSC_SUSP		BIT(7)
-#	define PORTSC_CCS		BIT(0)
-#define CI_HOSTPC1		0xb4
-#	define HOSTPC1_PHCD		BIT(22)
-#define CI_OTGSC		0xf4
-#	define OTGSC_DPIE		BIT(30)
-#	define OTGSC_1MSE		BIT(29)
-#	define OTGSC_BSEIE		BIT(28)
-#	define OTGSC_BSVIE		BIT(27)
-#	define OTGSC_ASVIE		BIT(26)
-#	define OTGSC_AVVIE		BIT(25)
-#	define OTGSC_IDIE		BIT(24)
-#	define OTGSC_DPIS		BIT(22)
-#	define OTGSC_1MSS		BIT(21)
-#	define OTGSC_BSEIS		BIT(20)
-#	define OTGSC_BSVIS		BIT(19)
-#	define OTGSC_ASVIS		BIT(18)
-#	define OTGSC_AVVIS		BIT(17)
-#	define OTGSC_IDIS		BIT(16)
-#	define OTGSC_DPS		BIT(14)
-#	define OTGSC_1MST		BIT(13)
-#	define OTGSC_BSE		BIT(12)
-#	define OTGSC_BSV		BIT(11)
-#	define OTGSC_ASV		BIT(10)
-#	define OTGSC_AVV		BIT(9)
-#	define OTGSC_ID			BIT(8)
-#	define OTGSC_HABA		BIT(7)
-#	define OTGSC_HADP		BIT(6)
-#	define OTGSC_IDPU		BIT(5)
-#	define OTGSC_DP			BIT(4)
-#	define OTGSC_OT			BIT(3)
-#	define OTGSC_HAAR		BIT(2)
-#	define OTGSC_VC			BIT(1)
-#	define OTGSC_VD			BIT(0)
-#	define OTGSC_INTEN_MASK		(0x7f << 24)
-#	define OTGSC_INTSTS_MASK	(0x7f << 16)
-#define CI_USBMODE		0xf8
-#	define USBMODE_CM		(BIT(1) | BIT(0))
-#	define USBMODE_IDLE		0
-#	define USBMODE_DEVICE		0x2
-#	define USBMODE_HOST		0x3
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-struct otg_hsm {
-	/* Input */
-	int a_bus_resume;
-	int a_bus_suspend;
-	int a_conn;
-	int a_sess_vld;
-	int a_srp_det;
-	int a_vbus_vld;
-	int b_bus_resume;
-	int b_bus_suspend;
-	int b_conn;
-	int b_se0_srp;
-	int b_sess_end;
-	int b_sess_vld;
-	int id;
-
-	/* Internal variables */
-	int a_set_b_hnp_en;
-	int b_srp_done;
-	int b_hnp_enable;
-
-	/* Timeout indicator for timers */
-	int a_wait_vrise_tmout;
-	int a_wait_bcon_tmout;
-	int a_aidl_bdis_tmout;
-	int b_ase0_brst_tmout;
-	int b_bus_suspend_tmout;
-	int b_srp_res_tmout;
-
-	/* Informative variables */
-	int a_bus_drop;
-	int a_bus_req;
-	int a_clr_err;
-	int a_suspend_req;
-	int b_bus_req;
-
-	/* Output */
-	int drv_vbus;
-	int loc_conn;
-	int loc_sof;
-
-	/* Others */
-	int b_bus_suspend_vld;
-};
-
-#define TA_WAIT_VRISE	100
-#define TA_WAIT_BCON	30000
-#define TA_AIDL_BDIS	15000
-#define TB_ASE0_BRST	5000
-#define TB_SE0_SRP	2
-#define TB_SRP_RES	100
-#define TB_BUS_SUSPEND	500
-
-struct langwell_otg_timer {
-	unsigned long expires;	/* Number of count increase to timeout */
-	unsigned long count;	/* Tick counter */
-	void (*function)(unsigned long);	/* Timeout function */
-	unsigned long data;	/* Data passed to function */
-	struct list_head list;
-};
-
-struct langwell_otg {
-	struct otg_transceiver 	otg;
-	struct otg_hsm 		hsm;
-	void __iomem 		*regs;
-	unsigned 		region;
-	struct pci_driver	*host_ops;
-	struct pci_driver	*client_ops;
-	struct pci_dev		*pdev;
-	struct work_struct 	work;
-	struct workqueue_struct	*qwork;
-	spinlock_t 		lock;
-	spinlock_t 		wq_lock;
-};
-
-static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
-{
-	return container_of(otg, struct langwell_otg, otg);
-}
-
-#ifdef DEBUG
-#define otg_dbg(fmt, args...) \
-	printk(KERN_DEBUG fmt , ## args)
-#else
-#define otg_dbg(fmt, args...) \
-	do { } while (0)
-#endif /* DEBUG */
-#endif /* __LANGWELL_OTG_H__ */