KVM guest: remove KVM guest pv mmu support

This has not been used for some years now.  It's time to remove it.
Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

arch/x86/kernel/kvm.c

@@ -39,8 +39,6 @@
 #include <asm/desc.h>
 #include <asm/tlbflush.h>
 
-#define MMU_QUEUE_SIZE 1024
-
 static int kvmapf = 1;
 
 static int parse_no_kvmapf(char *arg)
@@ -60,21 +58,10 @@ static int parse_no_stealacc(char *arg)
 
 early_param("no-steal-acc", parse_no_stealacc);
 
-struct kvm_para_state {
-	u8 mmu_queue[MMU_QUEUE_SIZE];
-	int mmu_queue_len;
-};
-
-static DEFINE_PER_CPU(struct kvm_para_state, para_state);
 static DEFINE_PER_CPU(struct kvm_vcpu_pv_apf_data, apf_reason) __aligned(64);
 static DEFINE_PER_CPU(struct kvm_steal_time, steal_time) __aligned(64);
 static int has_steal_clock = 0;
 
-static struct kvm_para_state *kvm_para_state(void)
-{
-	return &per_cpu(para_state, raw_smp_processor_id());
-}
-
 /*
  * No need for any "IO delay" on KVM
  */
@@ -271,151 +258,6 @@ do_async_page_fault(struct pt_regs *regs, unsigned long error_code)
 	}
 }
 
-static void kvm_mmu_op(void *buffer, unsigned len)
-{
-	int r;
-	unsigned long a1, a2;
-
-	do {
-		a1 = __pa(buffer);
-		a2 = 0;   /* on i386 __pa() always returns <4G */
-		r = kvm_hypercall3(KVM_HC_MMU_OP, len, a1, a2);
-		buffer += r;
-		len -= r;
-	} while (len);
-}
-
-static void mmu_queue_flush(struct kvm_para_state *state)
-{
-	if (state->mmu_queue_len) {
-		kvm_mmu_op(state->mmu_queue, state->mmu_queue_len);
-		state->mmu_queue_len = 0;
-	}
-}
-
-static void kvm_deferred_mmu_op(void *buffer, int len)
-{
-	struct kvm_para_state *state = kvm_para_state();
-
-	if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) {
-		kvm_mmu_op(buffer, len);
-		return;
-	}
-	if (state->mmu_queue_len + len > sizeof state->mmu_queue)
-		mmu_queue_flush(state);
-	memcpy(state->mmu_queue + state->mmu_queue_len, buffer, len);
-	state->mmu_queue_len += len;
-}
-
-static void kvm_mmu_write(void *dest, u64 val)
-{
-	__u64 pte_phys;
-	struct kvm_mmu_op_write_pte wpte;
-
-#ifdef CONFIG_HIGHPTE
-	struct page *page;
-	unsigned long dst = (unsigned long) dest;
-
-	page = kmap_atomic_to_page(dest);
-	pte_phys = page_to_pfn(page);
-	pte_phys <<= PAGE_SHIFT;
-	pte_phys += (dst & ~(PAGE_MASK));
-#else
-	pte_phys = (unsigned long)__pa(dest);
-#endif
-	wpte.header.op = KVM_MMU_OP_WRITE_PTE;
-	wpte.pte_val = val;
-	wpte.pte_phys = pte_phys;
-
-	kvm_deferred_mmu_op(&wpte, sizeof wpte);
-}
-
-/*
- * We only need to hook operations that are MMU writes.  We hook these so that
- * we can use lazy MMU mode to batch these operations.  We could probably
- * improve the performance of the host code if we used some of the information
- * here to simplify processing of batched writes.
- */
-static void kvm_set_pte(pte_t *ptep, pte_t pte)
-{
-	kvm_mmu_write(ptep, pte_val(pte));
-}
-
-static void kvm_set_pte_at(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep, pte_t pte)
-{
-	kvm_mmu_write(ptep, pte_val(pte));
-}
-
-static void kvm_set_pmd(pmd_t *pmdp, pmd_t pmd)
-{
-	kvm_mmu_write(pmdp, pmd_val(pmd));
-}
-
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
-static void kvm_set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	kvm_mmu_write(ptep, pte_val(pte));
-}
-
-static void kvm_pte_clear(struct mm_struct *mm,
-			  unsigned long addr, pte_t *ptep)
-{
-	kvm_mmu_write(ptep, 0);
-}
-
-static void kvm_pmd_clear(pmd_t *pmdp)
-{
-	kvm_mmu_write(pmdp, 0);
-}
-#endif
-
-static void kvm_set_pud(pud_t *pudp, pud_t pud)
-{
-	kvm_mmu_write(pudp, pud_val(pud));
-}
-
-#if PAGETABLE_LEVELS == 4
-static void kvm_set_pgd(pgd_t *pgdp, pgd_t pgd)
-{
-	kvm_mmu_write(pgdp, pgd_val(pgd));
-}
-#endif
-#endif /* PAGETABLE_LEVELS >= 3 */
-
-static void kvm_flush_tlb(void)
-{
-	struct kvm_mmu_op_flush_tlb ftlb = {
-		.header.op = KVM_MMU_OP_FLUSH_TLB,
-	};
-
-	kvm_deferred_mmu_op(&ftlb, sizeof ftlb);
-}
-
-static void kvm_release_pt(unsigned long pfn)
-{
-	struct kvm_mmu_op_release_pt rpt = {
-		.header.op = KVM_MMU_OP_RELEASE_PT,
-		.pt_phys = (u64)pfn << PAGE_SHIFT,
-	};
-
-	kvm_mmu_op(&rpt, sizeof rpt);
-}
-
-static void kvm_enter_lazy_mmu(void)
-{
-	paravirt_enter_lazy_mmu();
-}
-
-static void kvm_leave_lazy_mmu(void)
-{
-	struct kvm_para_state *state = kvm_para_state();
-
-	mmu_queue_flush(state);
-	paravirt_leave_lazy_mmu();
-}
-
 static void __init paravirt_ops_setup(void)
 {
 	pv_info.name = "KVM";
@@ -424,29 +266,6 @@ static void __init paravirt_ops_setup(void)
 	if (kvm_para_has_feature(KVM_FEATURE_NOP_IO_DELAY))
 		pv_cpu_ops.io_delay = kvm_io_delay;
 
-	if (kvm_para_has_feature(KVM_FEATURE_MMU_OP)) {
-		pv_mmu_ops.set_pte = kvm_set_pte;
-		pv_mmu_ops.set_pte_at = kvm_set_pte_at;
-		pv_mmu_ops.set_pmd = kvm_set_pmd;
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
-		pv_mmu_ops.set_pte_atomic = kvm_set_pte_atomic;
-		pv_mmu_ops.pte_clear = kvm_pte_clear;
-		pv_mmu_ops.pmd_clear = kvm_pmd_clear;
-#endif
-		pv_mmu_ops.set_pud = kvm_set_pud;
-#if PAGETABLE_LEVELS == 4
-		pv_mmu_ops.set_pgd = kvm_set_pgd;
-#endif
-#endif
-		pv_mmu_ops.flush_tlb_user = kvm_flush_tlb;
-		pv_mmu_ops.release_pte = kvm_release_pt;
-		pv_mmu_ops.release_pmd = kvm_release_pt;
-		pv_mmu_ops.release_pud = kvm_release_pt;
-
-		pv_mmu_ops.lazy_mode.enter = kvm_enter_lazy_mmu;
-		pv_mmu_ops.lazy_mode.leave = kvm_leave_lazy_mmu;
-	}
 #ifdef CONFIG_X86_IO_APIC
 	no_timer_check = 1;
 #endif