arm64: dts: qcom: sc7180: move QUP and QSPI opp tables out of SoC node

The SoC node is a simple-bus and its schema expect to have nodes only
with unit addresses:

  sc7180-trogdor-lazor-r3.dtb: soc@0: opp-table-qspi: {'compatible': ['operating-points-v2'], 'phandle': [[186]], 'opp-75000000':
    ...  'required-opps': [[47]]}} should not be valid under {'type': 'object'}

Move to top-level OPP tables:
 - QUP which is shared between multiple nodes,
 - QSPI which cannot be placed in its node due to address/size cells.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221210115704.97614-1-krzysztof.kozlowski@linaro.org

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -538,6 +538,44 @@ cpu6_opp16: opp-2553600000 {
 		};
 	};
 
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -739,25 +777,6 @@ opp-384000000 {
 			};
 		};
 
-		qup_opp_table: opp-table-qup {
-			compatible = "operating-points-v2";
-
-			opp-75000000 {
-				opp-hz = /bits/ 64 <75000000>;
-				required-opps = <&rpmhpd_opp_low_svs>;
-			};
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				required-opps = <&rpmhpd_opp_svs>;
-			};
-
-			opp-128000000 {
-				opp-hz = /bits/ 64 <128000000>;
-				required-opps = <&rpmhpd_opp_nom>;
-			};
-		};
-
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x6000>;
@@ -2641,25 +2660,6 @@ opp-202000000 {
 			};
 		};
 
-		qspi_opp_table: opp-table-qspi {
-			compatible = "operating-points-v2";
-
-			opp-75000000 {
-				opp-hz = /bits/ 64 <75000000>;
-				required-opps = <&rpmhpd_opp_low_svs>;
-			};
-
-			opp-150000000 {
-				opp-hz = /bits/ 64 <150000000>;
-				required-opps = <&rpmhpd_opp_svs>;
-			};
-
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-				required-opps = <&rpmhpd_opp_nom>;
-			};
-		};
-
 		qspi: spi@88dc000 {
 			compatible = "qcom,sc7180-qspi", "qcom,qspi-v1";
 			reg = <0 0x088dc000 0 0x600>;