dt-bindings, EDAC: Add Aspeed AST2500

Add support for EDAC on the Aspeed AST2500 SoC.
Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/1547743097-5236-3-git-send-email-schaecsn@gmx.net

Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt

+Aspeed AST2500 SoC EDAC node
+
+The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be "aspeed,ast2500-sdram-edac"
+- reg:        sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+	};