Commit 52a39acd authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://bk.arm.linux.org.uk

into home.transmeta.com:/home/torvalds/v2.5/linux
parents 8887a32b 8a7b626f
......@@ -206,26 +206,15 @@ LC0: .word __bss_start
* r7 = architecture number
* r8 = run-time address of "start"
* On exit,
* r0, r1, r2, r3, r8, r9 corrupted
* r1, r2, r3, r8, r9, r12 corrupted
* This routine must preserve:
* r4, r5, r6, r7
*/
.align 5
cache_on: ldr r1, proc_sa110_type
eor r1, r1, r6
movs r1, r1, lsr #5 @ catch SA110 and SA1100
beq 1f
ldr r1, proc_sa1110_type
eor r1, r1, r6
movs r1, r1, lsr #4
beq 1f
ldr r1, proc_xscale_type
eor r1, r1, r6
movs r1, r1, lsr #16
@ movne pc, lr
bne cache_off
1:
sub r3, r4, #16384 @ Page directory size
cache_on: mov r3, #8 @ cache_on function
b call_cache_fn
__cache_on: sub r3, r4, #16384 @ Page directory size
bic r3, r3, #0xff @ Align the pointer
bic r3, r3, #0x3f00
/*
......@@ -277,8 +266,9 @@ cache_on: ldr r1, proc_sa110_type
mov pc, lr
/*
* This code is relocatable. It is relocated by the above code to the end
* of the kernel and executed there. During this time, we have no stacks.
* All code following this line is relocatable. It is relocated by
* the above code to the end of the decompressed kernel image and
* executed there. During this time, we have no stacks.
*
* r0 = decompressed kernel length
* r1-r3 = unused
......@@ -309,47 +299,101 @@ call_kernel: bl cache_clean_flush
mov pc, r4 @ call kernel
/*
* Here follow the relocatable cache support functions for
* the various processors.
* Here follow the relocatable cache support functions for the
* various processors. This is a generic hook for locating an
* entry and jumping to an instruction at the specified offset
* from the start of the block. Please note this is all position
* independent code.
*
* r1 = corrupted
* r2 = corrupted
* r3 = block offset
* r6 = CPU ID
* r12 = corrupted
*/
call_cache_fn: adr r12, proc_types
1: ldr r1, [r12, #0] @ get value
ldr r2, [r12, #4] @ get mask
eor r1, r1, r6 @ (real ^ match)
tst r1, r2 @ & mask
addeq pc, r12, r3 @ call cache function
add r12, r12, #4*5
b 1b
/*
* Table for cache operations. This is basically:
* - CPU ID match
* - CPU ID mask
* - 'cache on' method instruction
* - 'cache off' method instruction
* - 'cache flush' method instruction
*
* We match an entry using: ((real_id ^ match) & mask) == 0
*
* Writethrough caches generally only need 'on' and 'off'
* methods. Writeback caches _must_ have the flush method
* defined.
*/
.type proc_types,#object
proc_types:
.word 0x41560600 @ ARM6/610
.word 0xffffffe0
b __arm6_cache_off
b __arm6_cache_off
mov pc, lr
.type proc_sa110_type,#object
proc_sa110_type:
.word 0x4401a100
.size proc_sa110_type, . - proc_sa110_type
.word 0x41007000 @ ARM7/710
.word 0xfff8fe00
b __arm7_cache_off
b __arm7_cache_off
mov pc, lr
.type proc_sa1110_type,#object
proc_sa1110_type:
.word 0x6901b110
.size proc_sa1110_type, . - proc_sa1110_type
.word 0x41807200 @ ARM720T (writethrough)
.word 0xffffff00
b __cache_on
b __armv4_cache_off
mov pc, lr
.word 0x4401a100 @ sa110 / sa1100
.word 0xffffffe0
b __cache_on
b __armv4_cache_off
b __armv4_cache_flush
.word 0x6901b110 @ sa1110
.word 0xfffffff0
b __cache_on
b __armv4_cache_off
b __armv4_cache_flush
.word 0x69050000 @ xscale
.word 0xffff0000
b __cache_on
b __armv4_cache_off
b __armv4_cache_flush
.word 0 @ unrecognised type
.word 0
mov pc, lr
mov pc, lr
mov pc, lr
.size proc_types, . - proc_types
/*
* Turn off the Cache and MMU. ARMv3 does not support
* reading the control register, but ARMv4 does.
*
* On entry, r6 = processor ID
* On exit, r0, r1 corrupted
* On exit, r0, r1, r2, r3, r12 corrupted
* This routine must preserve: r4, r6, r7
*/
.align 5
cache_off:
#ifdef CONFIG_CPU_ARM610
eor r1, r6, #0x41000000
eor r1, r1, #0x00560000
bic r1, r1, #0x0000001f
teq r1, #0x00000600
mov r0, #0x00000060 @ ARM6 control reg.
beq __armv3_cache_off
#endif
#ifdef CONFIG_CPU_ARM710
eor r1, r6, #0x41000000
bic r1, r1, #0x00070000
bic r1, r1, #0x000000ff
teq r1, #0x00007000 @ ARM7
teqne r1, #0x00007100 @ ARM710
mov r0, #0x00000070 @ ARM7 control reg.
beq __armv3_cache_off
#endif
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
__armv4_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
......@@ -358,6 +402,14 @@ cache_off:
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
mov pc, lr
__arm6_cache_off:
mov r0, #0x00000060 @ ARM6 control reg.
b __armv3_cache_off
__arm7_cache_off:
mov r0, #0x00000070 @ ARM7 control reg.
b __armv3_cache_off
__armv3_cache_off:
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mov r0, #0
......@@ -371,25 +423,16 @@ __armv3_cache_off:
* On entry,
* r6 = processor ID
* On exit,
* r1, r2, r12 corrupted
* r1, r2, r3, r12 corrupted
* This routine must preserve:
* r4, r6, r7
* r0, r4, r5, r6, r7
*/
.align 5
cache_clean_flush:
ldr r1, proc_sa110_type
eor r1, r1, r6
movs r1, r1, lsr #5 @ catch SA110 and SA1100
beq 1f
ldr r1, proc_sa1110_type
eor r1, r1, r6
movs r1, r1, lsr #4
beq 1f
ldr r1, proc_xscale_type
eor r1, r1, r6
movs r1, r1, lsr #16
movne pc, lr
1:
mov r3, #16
b call_cache_fn
__armv4_cache_flush:
bic r1, pc, #31
add r2, r1, #65536 @ 2x the largest dcache size
1: ldr r12, [r1], #32 @ s/w flush D cache
......@@ -400,12 +443,6 @@ cache_clean_flush:
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
.type proc_xscale_type,#object
proc_xscale_type:
.word 0x69050000
.size proc_xscale_type, . - proc_xscale_type
/*
* Various debugging routines for printing hex characters and
* memory, which again must be relocatable.
......
......@@ -15,7 +15,14 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_OBSOLETE is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
#
# Loadable module support
......@@ -96,6 +103,7 @@ CONFIG_ARCH_SHARK=y
# CONFIG_SA1100_VICTOR is not set
# CONFIG_SA1100_XP860 is not set
# CONFIG_SA1100_YOPY is not set
# CONFIG_SA1100_STORK is not set
# CONFIG_SA1100_USB is not set
# CONFIG_SA1100_USB_NETLINK is not set
# CONFIG_SA1100_USB_CHAR is not set
......@@ -124,6 +132,7 @@ CONFIG_CPU_32=y
#
# CONFIG_CPU_32v3 is not set
CONFIG_CPU_32v4=y
# CONFIG_CPU_32v5 is not set
# CONFIG_CPU_ARM610 is not set
# CONFIG_CPU_ARM710 is not set
# CONFIG_CPU_ARM720T is not set
......@@ -133,13 +142,17 @@ CONFIG_CPU_32v4=y
# CONFIG_CPU_ARM1020 is not set
CONFIG_CPU_SA110=y
# CONFIG_CPU_SA1100 is not set
# CONFIG_CPU_XSCALE is not set
# CONFIG_XSCALE_PMU is not set
# CONFIG_ARM_THUMB is not set
# CONFIG_DISCONTIGMEM is not set
#
# Processor Features
#
#
# General setup
#
# CONFIG_DISCONTIGMEM is not set
CONFIG_PCI=y
# CONFIG_PCI_HOST_PLX90X0 is not set
CONFIG_PCI_HOST_VIA82C505=y
......@@ -149,10 +162,6 @@ CONFIG_ISA_DMA=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
#
# At least one math emulation must be selected
......@@ -165,6 +174,7 @@ CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_PREEMPT is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_LEDS=y
......@@ -195,6 +205,7 @@ CONFIG_PARPORT_PC_CML1=y
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
......@@ -229,7 +240,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
......@@ -239,6 +250,7 @@ CONFIG_INET=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
......@@ -280,6 +292,7 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
......@@ -290,7 +303,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
......@@ -306,12 +318,9 @@ CONFIG_NET_PCI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_CS89x0=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
......@@ -323,13 +332,13 @@ CONFIG_CS89x0=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_NEW_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
......@@ -337,11 +346,13 @@ CONFIG_CS89x0=y
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
......@@ -366,6 +377,11 @@ CONFIG_CS89x0=y
#
# CONFIG_WAN is not set
#
# "Tulip" family network device support
#
# CONFIG_NET_TULIP is not set
#
# Amateur Radio support
#
......@@ -382,7 +398,7 @@ CONFIG_CS89x0=y
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
# ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
......@@ -393,6 +409,7 @@ CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
......@@ -409,7 +426,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
# IDE chipset support
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
......@@ -420,7 +437,6 @@ CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
......@@ -520,13 +536,23 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_ISDN is not set
#
# Input core support
# Input device support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_GAMEPORT_PCIGAME is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
# CONFIG_SERIO is not set
# CONFIG_SERIO_SERPORT is not set
#
# Character devices
......@@ -541,6 +567,24 @@ CONFIG_SERIAL_CONSOLE=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
#
# ARM Serial drivers
#
# CONFIG_ATOMWIDE_SERIAL is not set
# CONFIG_DUALSP_SERIAL is not set
# CONFIG_SERIAL_ANAKIN is not set
# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
# CONFIG_SERIAL_AMBA is not set
......@@ -554,16 +598,6 @@ CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_UART00_CONSOLE is not set
# CONFIG_SERIAL_SA1100 is not set
# CONFIG_SERIAL_SA1100_CONSOLE is not set
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_ATOMWIDE_SERIAL is not set
# CONFIG_DUALSP_SERIAL is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
......@@ -596,19 +630,6 @@ CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
......@@ -664,6 +685,9 @@ CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
......@@ -694,6 +718,7 @@ CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_SMB_FS is not set
......@@ -707,7 +732,6 @@ CONFIG_LOCKD=y
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
......@@ -797,6 +821,7 @@ CONFIG_FB_CYBER2000=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VIRTUAL is not set
......@@ -813,6 +838,11 @@ CONFIG_FONT_8x16=y
# Sound
#
CONFIG_SOUND=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
......@@ -865,6 +895,11 @@ CONFIG_SOUND_SB=m
# CONFIG_SOUND_WAVEARTIST is not set
# CONFIG_SOUND_TVMIXER is not set
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Multimedia Capabilities Port drivers
#
......@@ -875,111 +910,14 @@ CONFIG_SOUND_SB=m
# CONFIG_MCP_UCB1200_TS is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_OHCI_SA1111 is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
#
# Input core support is needed for USB HID
#
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
# Console Switches
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_SWITCHES is not set
#
# USB Miscellaneous drivers
# USB support
#
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB is not set
#
# Bluetooth support
......@@ -992,7 +930,6 @@ CONFIG_SOUND_SB=m
CONFIG_NO_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_NO_PGT_CACHE is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_MAGIC_SYSRQ is not set
......@@ -1008,3 +945,5 @@ CONFIG_DEBUG_USER=y
# Library routines
#
CONFIG_CRC32=y
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
......@@ -68,6 +68,7 @@ extern void __umoddi3(void);
extern void __udivmoddi4(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void abort(void);
extern void ret_from_exception(void);
extern void fpundefinstr(void);
......
......@@ -426,6 +426,9 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
cmd |= features;
pci_write_config_word(dev, PCI_COMMAND, cmd);
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
SMP_CACHE_BYTES >> 2);
}
/*
......
......@@ -31,14 +31,6 @@
#include <asm/processor.h>
#include <asm/uaccess.h>
/*
* Values for cpu_do_idle()
*/
#define IDLE_WAIT_SLOW 0
#define IDLE_WAIT_FAST 1
#define IDLE_CLOCK_SLOW 2
#define IDLE_CLOCK_FAST 3
extern const char *processor_modes[];
extern void setup_mm_for_reboot(char mode);
......@@ -77,6 +69,18 @@ __setup("hlt", hlt_setup);
void (*pm_idle)(void);
void (*pm_power_off)(void);
/*
* This is our default idle handler. We need to disable
* interrupts here to ensure we don't miss a wakeup call.
*/
static void default_idle(void)
{
__cli();
if (!need_resched() && !hlt_counter)
arch_idle();
__sti();
}
/*
* The idle thread. We try to conserve power, while trying to keep
* overall latency low. The architecture specific idle is passed
......@@ -89,7 +93,7 @@ void cpu_idle(void)
while (1) {
void (*idle)(void) = pm_idle;
if (!idle)
idle = arch_idle;
idle = default_idle;
leds_event(led_idle_start);
while (!need_resched())
idle();
......
......@@ -188,7 +188,7 @@ static inline void dump_cache(const char *prefix, unsigned int cache)
{
unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
printk("%s size %dK associativity %d line length %d sets %d\n",
printk("%s: %d bytes, associativity %d, %d byte lines, %d sets\n",
prefix,
mult << (8 + CACHE_SIZE(cache)),
(mult << CACHE_ASSOC(cache)) >> 1,
......
......@@ -546,12 +546,14 @@ void abort(void)
void __init trap_init(void)
{
extern void __trap_init(void *);
__trap_init((void *)vectors_base());
if (vectors_base() != 0)
printk(KERN_DEBUG "Relocating machine vectors to 0x%08x\n",
vectors_base());
extern void __trap_init(unsigned long);
unsigned long base = vectors_base();
__trap_init(base);
flush_icache_range(base, base + PAGE_SIZE);
if (base != 0)
printk(KERN_DEBUG "Relocating machine vectors to 0x%08lx\n",
base);
#ifdef CONFIG_CPU_32
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
#endif
......
......@@ -106,8 +106,10 @@ static struct irqaction irq_cascade = { handler: no_action, name: "cascade", };
static struct resource pic1_resource = { "pic1", 0x20, 0x3f };
static struct resource pic2_resource = { "pic2", 0xa0, 0xbf };
void __init isa_init_irq(unsigned int irq)
void __init isa_init_irq(unsigned int host_irq)
{
unsigned int irq;
/*
* Setup, and then probe for an ISA PIC
* If the PIC is not there, then we
......@@ -133,10 +135,10 @@ void __init isa_init_irq(unsigned int irq)
outb(0xff, PIC_MASK_HI);/* mask all IRQs */
} else {
printk(KERN_INFO "IRQ: ISA PIC not found\n");
irq = -1;
host_irq = (unsigned int)-1;
}
if (irq != -1) {
if (host_irq != (unsigned int)-1) {
for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) {
set_irq_chip(irq, &isa_lo_chip);
set_irq_handler(irq, do_level_IRQ);
......@@ -153,7 +155,7 @@ void __init isa_init_irq(unsigned int irq)
request_resource(&ioport_resource, &pic2_resource);
setup_irq(IRQ_ISA_CASCADE, &irq_cascade);
set_irq_chained_handler(irq, isa_irq_handler);
set_irq_chained_handler(host_irq, isa_irq_handler);
/*
* On the NetWinder, don't automatically
......
......@@ -52,26 +52,10 @@ static int __init adsbitsy_init(void)
/*
* Probe for SA1111.
*/
ret = sa1111_probe(0x18000000);
ret = sa1111_init(NULL, 0x18000000, IRQ_GPIO0);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* Enable PWM control for LCD
*/
......@@ -81,20 +65,6 @@ static int __init adsbitsy_init(void)
SKPWM1 = 0x01; // Backlight
SKPEN1 = 1;
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
set_GPIO_IRQ_edge(GPIO_GPIO0, GPIO_RISING_EDGE);
sa1111_init_irq(IRQ_GPIO0);
return 0;
}
......
......@@ -34,8 +34,6 @@
static int __init badge4_sa1111_init(void)
{
int ret;
/*
* Ensure that the memory bus request/grant signals are setup,
* and the grant is held in its inactive state
......@@ -45,40 +43,7 @@ static int __init badge4_sa1111_init(void)
/*
* Probe for SA1111.
*/
ret = sa1111_probe(BADGE4_SA1111_BASE);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
sa1111_init_irq(BADGE4_IRQ_GPIO_SA1111);
return 0;
return sa1111_init(NULL, BADGE4_SA1111_BASE, BADGE4_IRQ_GPIO_SA1111);
}
static int __init badge4_init(void)
......
......@@ -42,26 +42,10 @@ static int __init graphicsmaster_init(void)
/*
* Probe for SA1111.
*/
ret = sa1111_probe(0x18000000);
ret = sa1111_init(NULL, 0x18000000, ADS_EXT_IRQ(0));
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* Enable PWM control for LCD
*/
......@@ -71,19 +55,6 @@ static int __init graphicsmaster_init(void)
SKPWM1 = 0x01; // Backlight
SKPEN1 = 1;
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
sa1111_init_irq(ADS_EXT_IRQ(0));
return 0;
}
......
......@@ -10,6 +10,7 @@
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/device.h>
#include <asm/hardware.h>
#include <asm/irq.h>
......@@ -21,6 +22,10 @@
#include "sa1111.h"
static struct device neponset_device = {
name: "Neponset",
bus_id: "nep_bus",
};
/*
* Install handler for Neponset IRQ. Note that we have to loop here
......@@ -125,6 +130,10 @@ static int __init neponset_init(void)
return -ENODEV;
}
ret = device_register(&neponset_device);
if (ret)
return ret;
neponset_init_irq();
/*
......@@ -139,45 +148,9 @@ static int __init neponset_init(void)
/* FIXME: setup MSC2 */
/*
* Probe for a SA1111.
*/
ret = sa1111_probe(0x40000000);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
* Probe and initialise the SA1111.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* Initialise SA1111 IRQs
*/
sa1111_init_irq(IRQ_NEPONSET_SA1111);
return 0;
return sa1111_init(&neponset_device, 0x40000000, IRQ_NEPONSET_SA1111);
}
__initcall(neponset_init);
......
......@@ -35,40 +35,7 @@ static int __init pfs168_init(void)
/*
* Probe for SA1111.
*/
ret = sa1111_probe(0x40000000);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
sa1111_init_irq(IRQ_GPIO25); /* SA1111 IRQ on GPIO 25 */
return 0;
return sa1111_init(NULL, 0x40000000, IRQ_GPIO25);
}
__initcall(pfs168_init);
......
......@@ -23,8 +23,11 @@
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
......@@ -32,11 +35,9 @@
#include "sa1111.h"
struct resource sa1111_resource = {
name: "SA1111",
};
struct sa1111_device *sa1111;
EXPORT_SYMBOL(sa1111_resource);
EXPORT_SYMBOL(sa1111);
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
......@@ -65,6 +66,9 @@ sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
if (stat1 & 1)
do_edge_IRQ(i, irq_desc + i, regs);
/* For level-based interrupts */
desc->chip->unmask(irq);
}
#define SA1111_IRQMASK_LO(x) (1 << (x - IRQ_SA1111_START))
......@@ -198,7 +202,7 @@ static struct irqchip sa1111_high_chip = {
type: sa1111_type_highirq,
};
void __init sa1111_init_irq(int irq_nr)
static void __init sa1111_init_irq(int irq_nr)
{
unsigned int irq;
......@@ -239,6 +243,21 @@ void __init sa1111_init_irq(int irq_nr)
set_irq_chained_handler(irq_nr, sa1111_irq_handler);
}
static int sa1111_suspend(struct device *dev, u32 state, u32 level)
{
return 0;
}
static int sa1111_resume(struct device *dev, u32 level)
{
return 0;
}
static struct device_driver sa1111_device_driver = {
suspend: sa1111_suspend,
resume: sa1111_resume,
};
/**
* sa1111_probe - probe for a single SA1111 chip.
* @phys_addr: physical address of device.
......@@ -251,38 +270,71 @@ void __init sa1111_init_irq(int irq_nr)
* %-EBUSY physical address already marked in-use.
* %0 successful.
*/
int __init sa1111_probe(unsigned long phys_addr)
static int __init
sa1111_probe(struct device *parent, unsigned long phys_addr)
{
struct sa1111_device *sa;
unsigned long id;
int ret = -ENODEV;
sa1111_resource.start = phys_addr;
sa1111_resource.end = phys_addr + 0x2000;
sa = kmalloc(sizeof(struct sa1111_device), GFP_KERNEL);
if (!sa)
return -ENOMEM;
memset(sa, 0, sizeof(struct sa1111_device));
if (request_resource(&iomem_resource, &sa1111_resource)) {
sa->resource.name = "SA1111";
sa->resource.start = phys_addr;
sa->resource.end = phys_addr + 0x2000;
if (request_resource(&iomem_resource, &sa->resource)) {
ret = -EBUSY;
goto out;
}
/* eventually ioremap... */
sa->base = (void *)0xf4000000;
if (!sa->base) {
ret = -ENOMEM;
goto release;
}
/*
* Probe for the chip. Only touch the SBI registers.
*/
id = SBI_SKID;
id = readl(sa->base + SA1111_SKID);
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
ret = -ENODEV;
goto release;
goto unmap;
}
/*
* We found the chip.
*/
strcpy(sa->dev.name, "SA1111");
sprintf(sa->dev.bus_id, "%8.8lx", phys_addr);
sa->dev.parent = parent;
sa->dev.driver = &sa1111_device_driver;
ret = device_register(&sa->dev);
if (ret)
printk("sa1111 device_register failed: %d\n", ret);
printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
"silicon revision %lx, metal revision %lx\n",
(id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK));
sa1111 = sa;
return 0;
unmap:
// iounmap(sa->base);
release:
release_resource(&sa1111_resource);
release_resource(&sa->resource);
out:
kfree(sa);
return ret;
}
......@@ -302,7 +354,8 @@ int __init sa1111_probe(unsigned long phys_addr)
*/
void sa1111_wake(void)
{
unsigned long flags;
struct sa1111_device *sa = sa1111;
unsigned long flags, r;
local_irq_save(flags);
......@@ -317,8 +370,11 @@ void sa1111_wake(void)
/*
* Turn VCO on, and disable PLL Bypass.
*/
SBI_SKCR &= ~SKCR_VCO_OFF;
SBI_SKCR |= SKCR_PLL_BYPASS | SKCR_OE_EN;
r = readl(sa->base + SA1111_SKCR);
r &= ~SKCR_VCO_OFF;
writel(r, sa->base + SA1111_SKCR);
r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
writel(r, sa->base + SA1111_SKCR);
/*
* Wait lock time. SA1111 manual _doesn't_
......@@ -329,7 +385,8 @@ void sa1111_wake(void)
/*
* Enable RCLK. We also ensure that RDYEN is set.
*/
SBI_SKCR |= SKCR_RCLKEN | SKCR_RDYEN;
r |= SKCR_RCLKEN | SKCR_RDYEN;
writel(r, sa->base + SA1111_SKCR);
/*
* Wait 14 RCLK cycles for the chip to finish coming out
......@@ -340,18 +397,26 @@ void sa1111_wake(void)
/*
* Ensure all clocks are initially off.
*/
SKPCR = 0;
writel(0, sa->base + SA1111_SKPCR);
local_irq_restore(flags);
}
void sa1111_doze(void)
{
if (SKPCR & SKPCR_UCLKEN) {
struct sa1111_device *sa = sa1111;
unsigned long flags;
local_irq_save(flags);
if (readl(sa->base + SA1111_SKPCR) & SKPCR_UCLKEN) {
local_irq_restore(flags);
printk("SA1111 doze mode refused\n");
return;
}
SBI_SKCR &= ~SKCR_RCLKEN;
writel(readl(sa->base + SA1111_SKCR) & ~SKCR_RCLKEN, sa->base + SA1111_SKCR);
local_irq_restore(flags);
}
/*
......@@ -359,12 +424,13 @@ void sa1111_doze(void)
*/
void sa1111_configure_smc(int sdram, unsigned int drac, unsigned int cas_latency)
{
struct sa1111_device *sa = sa1111;
unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
if (cas_latency == 3)
smcr |= SMCR_CLAT;
SBI_SMCR = smcr;
writel(smcr, sa->base + SA1111_SMCR);
}
/* According to the "Intel StrongARM SA-1111 Microprocessor Companion
......@@ -432,3 +498,46 @@ int sa1111_check_dma_bug(dma_addr_t addr)
}
EXPORT_SYMBOL(sa1111_check_dma_bug);
int sa1111_init(struct device *parent, unsigned long phys, unsigned int irq)
{
int ret;
ret = sa1111_probe(parent, phys);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* Initialise SA1111 IRQs
*/
sa1111_init_irq(irq);
return 0;
}
/*
* linux/arch/arm/mach-sa1100/sa1111.h
*/
struct device;
/*
* Probe for a SA1111 chip.
*/
extern int sa1111_probe(unsigned long phys);
extern int
sa1111_init(struct device *parent, unsigned long phys, unsigned int irq);
/*
* Wake up a SA1111 chip.
......@@ -16,9 +18,3 @@ extern void sa1111_wake(void);
* Doze the SA1111 chip.
*/
extern void sa1111_doze(void);
/*
* Configure the SA1111 shared memory controller.
*/
extern void sa1111_configure_smc(int sdram, unsigned int drac, unsigned int cas_latency);
extern void sa1111_init_irq(int irq_nr);
......@@ -426,45 +426,12 @@ static int __init system3_init(void)
/*
* Probe for a SA1111.
*/
ret = sa1111_probe(PT_SA1111_BASE);
ret = sa1111_init(NULL, PT_SA1111_BASE, IRQ_SYSTEM3_SA1111);
if (ret < 0) {
printk( KERN_WARNING"PT Digital Board: no SA1111 found!\n" );
goto DONE;
}
/*
* We found it. Wake the chip up.
*/
sa1111_wake();
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
SKPCR |= SKPCR_DCLKEN;
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* Initialise SA1111 IRQs
*/
sa1111_init_irq(IRQ_SYSTEM3_SA1111);
#if defined( CONFIG_CPU_FREQ )
ret = cpufreq_register_notifier(&system3_clkchg_block);
if ( ret != 0 ) {
......
......@@ -20,6 +20,8 @@ static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
else return 255;
}
extern void __init via82c505_preinit(void *sysdata);
struct hw_pci shark_pci __initdata = {
setup: via82c505_setup,
swizzle: pci_std_swizzle,
......
......@@ -28,7 +28,7 @@ ENTRY(v5ej_early_abort)
ldrneh r3, [r2] @ read aborted thumb instruction
ldreq r3, [r2] @ read aborted ARM instruction
movne r3, r3, lsl #(21 - 12) @ move thumb bit 11 to ARM bit 20
tst r2, #1 << 20 @ L = 1 -> write
tst r3, #1 << 20 @ L = 1 -> write
orreq r1, r1, #1 << 8 @ yes.
1: mov pc, lr
......
......@@ -25,10 +25,12 @@
/*
* This allocates one page of cache-coherent memory space and returns
* both the virtual and a "dma" address to that space. It is not clear
* whether this could be called from an interrupt context or not. For
* now, we expressly forbid it, especially as some of the stuff we do
* here is not interrupt context safe.
* both the virtual and a "dma" address to that space.
*
* We should allow this function to be called from interrupt context.
* However, we call ioremap, which needs to fiddle around with various
* things (like the vmlist_lock, and allocating page tables). These
* things aren't interrupt safe (yet).
*
* Note that this does *not* zero the allocated area!
*/
......@@ -36,8 +38,9 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
{
struct page *page, *end, *free;
unsigned long order;
void *ret, *virt;
void *ret;
/* FIXME */
if (in_interrupt())
BUG();
......@@ -48,22 +51,22 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
if (!page)
goto no_page;
/*
* We could do with a page_to_phys and page_to_bus here.
*/
virt = page_address(page);
*dma_handle = virt_to_bus(virt);
ret = __ioremap(virt_to_phys(virt), size, 0);
*dma_handle = page_to_bus(page);
ret = __ioremap(page_to_phys(page), size, 0);
if (!ret)
goto no_remap;
#if 0 /* ioremap_does_flush_cache_all */
/*
* we need to ensure that there are no cachelines in use, or
* worse dirty in this area. Really, we don't need to do
* this since __ioremap does a flush_cache_all() anyway. --rmk
*/
invalidate_dcache_range(virt, virt + size);
{
void *virt = page_address(page);
/*
* we need to ensure that there are no cachelines in use, or
* worse dirty in this area. Really, we don't need to do
* this since __ioremap does a flush_cache_all() anyway. --rmk
*/
invalidate_dcache_range(virt, virt + size);
}
#endif
/*
......@@ -72,7 +75,6 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
* We also mark the pages in use as reserved so that
* remap_page_range works.
*/
page = virt_to_page(virt);
free = page + (size >> PAGE_SHIFT);
end = page + (1 << order);
......@@ -93,18 +95,12 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *handle)
{
void *__ret;
int __gfp = GFP_KERNEL;
int gfp = GFP_KERNEL;
#ifdef CONFIG_PCI
if ((hwdev) == NULL ||
(hwdev)->dma_mask != 0xffffffff)
#endif
__gfp |= GFP_DMA;
if (hwdev == NULL || hwdev->dma_mask != 0xffffffff)
gfp |= GFP_DMA;
__ret = consistent_alloc(__gfp, (size),
(handle));
return __ret;
return consistent_alloc(gfp, size, handle);
}
/*
......@@ -114,19 +110,16 @@ void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *handl
void consistent_free(void *vaddr, size_t size, dma_addr_t handle)
{
struct page *page, *end;
void *virt;
if (in_interrupt())
BUG();
virt = bus_to_virt(handle);
/*
* More messing around with the MM internals. This is
* sick, but then so is remap_page_range().
*/
size = PAGE_ALIGN(size);
page = virt_to_page(virt);
page = virt_to_page(bus_to_virt(handle));
end = page + (size >> PAGE_SHIFT);
for (; page < end; page++)
......
......@@ -6,7 +6,7 @@
# To add an entry into this database, please see Documentation/arm/README,
# or contact rmk@arm.linux.org.uk
#
# Last update: Sun Mar 24 11:48:10 2002
# Last update: Fri Mar 29 15:51:20 2002
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
......@@ -179,3 +179,4 @@ jornada56x ARCH_JORNADA56X JORNADA56X 167
active SA1100_ACTIVE ACTIVE 168
iq80321 ARCH_IQ80321 IQ80321 169
wid SA1100_WID WID 170
sabinal ARCH_SABINAL SABINAL 171
......@@ -1704,8 +1704,8 @@ cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
* Use MCLK from BIOS. FIXME: what about hotplug?
*/
#ifndef __arm__
cfb->mclk_mult = cyber2000_grphr(MCLK_MULT, cfb);
cfb->mclk_div = cyber2000_grphr(MCLK_DIV, cfb);
cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
#else
/*
* MCLK on the NetWinder and the Shark is fixed at 75MHz
......
......@@ -11,8 +11,7 @@
static inline void arch_idle(void)
{
#if 0
if (!hlt_counter)
cpu_do_idle(0);
cpu_do_idle();
#endif
}
......
......@@ -15,8 +15,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void
arch_idle(void)
static inline void arch_idle(void)
{
}
......
......@@ -8,9 +8,8 @@
* published by the Free Software Foundation.
*/
static void arch_idle(void)
static inline void arch_idle(void)
{
while (!need_resched() && !hlt_counter);
}
static inline void arch_reset(char mode)
......
......@@ -7,11 +7,11 @@
#define __ASM_ARCH_SYSTEM_H
#include <asm/hardware/iomd.h>
#include <asm/io.h>
static void arch_idle(void)
static inline void arch_idle(void)
{
while (!need_resched() && !hlt_counter)
iomd_writeb(0, IOMD_SUSMODE);
iomd_writeb(0, IOMD_SUSMODE);
}
#define arch_reset(mode) \
......
......@@ -22,7 +22,7 @@
#include <asm/hardware/clps7111.h>
static void arch_idle(void)
static inline void arch_idle(void)
{
clps_writel(1, HALT);
__asm__ __volatile__(
......
......@@ -20,31 +20,18 @@
* Instead, we spin, polling the IRQ_STAT register for the occurrence
* of any interrupt with core clock down to the memory clock.
*/
static void arch_idle(void)
static inline void arch_idle(void)
{
const char *irq_stat = (char *)0xff000000;
long flags;
if (!hlt_counter)
return;
/* disable clock switching */
asm volatile ("mcr%? p15, 0, ip, c15, c2, 2");
do {
/* disable interrupts */
cli();
/* check need_resched here to avoid races */
if (need_resched()) {
sti();
return;
}
/* disable clock switching */
asm volatile ("mcr%? p15, 0, ip, c15, c2, 2");
/* wait for an interrupt to occur */
while (!*irq_stat);
/* enable clock switching */
asm volatile ("mcr%? p15, 0, ip, c15, c1, 2");
/* allow the interrupt to happen */
sti();
} while (!need_resched());
/* wait for an interrupt to occur */
while (!*irq_stat);
/* enable clock switching */
asm volatile ("mcr%? p15, 0, ip, c15, c1, 2");
}
#define arch_reset(mode) cpu_reset(0x80000000)
......
......@@ -13,26 +13,9 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
static void arch_idle(void)
static inline void arch_idle(void)
{
unsigned long start_idle;
start_idle = jiffies;
do {
if (need_resched() || hlt_counter)
goto slow_out;
cpu_do_idle(IDLE_WAIT_FAST);
} while (time_before(jiffies, start_idle + HZ/50));
cpu_do_idle(IDLE_CLOCK_SLOW);
while (!need_resched() && !hlt_counter) {
cpu_do_idle(IDLE_WAIT_SLOW);
}
cpu_do_idle(IDLE_CLOCK_FAST);
slow_out:
cpu_do_idle();
}
static inline void arch_reset(char mode)
......
......@@ -24,13 +24,13 @@
#include <asm/arch/platform.h>
static void arch_idle(void)
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle(0);
cpu_do_idle();
}
extern __inline__ void arch_reset(char mode)
......
......@@ -23,13 +23,13 @@
#include <asm/arch/platform.h>
static void arch_idle(void)
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle(0);
cpu_do_idle();
}
static inline void arch_reset(char mode)
......
......@@ -10,10 +10,7 @@
static inline void arch_idle(void)
{
if (!hlt_counter)
{
cpu_do_idle(0);
}
cpu_do_idle();
}
......
......@@ -12,9 +12,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static void arch_idle(void)
static inline void arch_idle(void)
{
/* fixme: this needs to be cleaned up (converted from ASM code) --rmk */
*(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
}
......
......@@ -14,10 +14,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static void arch_idle(void)
static inline void arch_idle(void)
{
while (!need_resched() && !hlt_counter)
cpu_do_idle(IDLE_WAIT_SLOW);
cpu_do_idle();
}
#define arch_reset(mode) do { } while (0)
......
......@@ -14,13 +14,7 @@
static inline void arch_idle(void)
{
if (!hlt_counter) {
int flags;
local_irq_save(flags);
if(!need_resched())
cpu_do_idle(0);
local_irq_restore(flags);
}
cpu_do_idle();
}
......
......@@ -11,26 +11,9 @@
#include <asm/hardware/iomd.h>
#include <asm/io.h>
static void arch_idle(void)
static inline void arch_idle(void)
{
unsigned long start_idle;
start_idle = jiffies;
do {
if (need_resched() || hlt_counter)
goto slow_out;
cpu_do_idle(IDLE_WAIT_FAST);
} while (time_before(jiffies, start_idle + HZ/50));
cpu_do_idle(IDLE_CLOCK_SLOW);
while (!need_resched() && !hlt_counter) {
cpu_do_idle(IDLE_WAIT_SLOW);
}
cpu_do_idle(IDLE_CLOCK_FAST);
slow_out:
cpu_do_idle();
}
static inline void arch_reset(char mode)
......
......@@ -7,13 +7,7 @@
static inline void arch_idle(void)
{
if (!hlt_counter) {
int flags;
local_irq_save(flags);
if (!need_resched())
cpu_do_idle(0);
local_irq_restore(flags);
}
cpu_do_idle();
}
#ifdef CONFIG_SA1100_VICTOR
......
......@@ -38,6 +38,8 @@
#define __bus_to_virt__is_a_macro
#define __bus_to_virt(x) __phys_to_virt(x)
#define isa_virt_to_bus virt_to_bus
#define PHYS_TO_NID(addr) (0)
#endif
......@@ -21,7 +21,7 @@ static void arch_reset(char mode)
}
static void arch_idle(void)
static inline void arch_idle(void)
{
}
......
......@@ -6,26 +6,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static void arch_idle(void)
static inline void arch_idle(void)
{
unsigned long start_idle;
start_idle = jiffies;
do {
if (need_resched() || hlt_counter)
goto slow_out;
cpu_do_idle(IDLE_WAIT_FAST);
} while (time_before(jiffies, start_idle + HZ/50));
cpu_do_idle(IDLE_CLOCK_SLOW);
while (!need_resched() && !hlt_counter) {
cpu_do_idle(IDLE_WAIT_SLOW);
}
cpu_do_idle(IDLE_CLOCK_FAST);
slow_out:
cpu_do_idle();
}
#define arch_reset(mode) do { } while (0)
......
......@@ -40,7 +40,7 @@ extern const struct processor arm3_processor_functions;
#define cpu_proc_init() processor._proc_init()
#define cpu_proc_fin() processor._proc_fin()
#define cpu_do_idle() do { } while (0)
#define cpu_switch_mm(pgd,tsk) processor._set_pgd(pgd)
#define cpu_switch_mm(pgd,mm) processor._set_pgd(pgd)
#define cpu_xchg_1(x,ptr) processor._xchg_1(x,ptr)
#define cpu_xchg_4(x,ptr) processor._xchg_4(x,ptr)
......
......@@ -12,8 +12,7 @@
#include <asm/memory.h>
#include <asm/page.h>
/* forward-declare task_struct */
struct task_struct;
struct mm_struct;
/*
* Don't change this structure - ASM code
......@@ -43,7 +42,7 @@ extern struct processor {
/*
* Idle the processor
*/
int (*_do_idle)(int mode);
int (*_do_idle)(void);
/*
* Processor architecture specific
*/
......@@ -93,7 +92,7 @@ extern struct processor {
/*
* Set the page table
*/
void (*set_pgd)(unsigned long pgd_phys);
void (*set_pgd)(unsigned long pgd_phys, struct mm_struct *mm);
/*
* Set a PMD (handling IMP bit 4)
*/
......@@ -113,7 +112,7 @@ extern const struct processor sa110_processor_functions;
#define cpu_proc_init() processor._proc_init()
#define cpu_proc_fin() processor._proc_fin()
#define cpu_reset(addr) processor.reset(addr)
#define cpu_do_idle(mode) processor._do_idle(mode)
#define cpu_do_idle() processor._do_idle()
#define cpu_cache_clean_invalidate_all() processor.cache.clean_invalidate_all()
#define cpu_cache_clean_invalidate_range(s,e,f) processor.cache.clean_invalidate_range(s,e,f)
......@@ -126,11 +125,11 @@ extern const struct processor sa110_processor_functions;
#define cpu_icache_invalidate_range(s,e) processor.icache.invalidate_range(s,e)
#define cpu_icache_invalidate_page(vp) processor.icache.invalidate_page(vp)
#define cpu_set_pgd(pgd) processor.pgtable.set_pgd(pgd)
#define cpu_set_pgd(pgd,mm) processor.pgtable.set_pgd(pgd,mm)
#define cpu_set_pmd(pmdp, pmd) processor.pgtable.set_pmd(pmdp, pmd)
#define cpu_set_pte(ptep, pte) processor.pgtable.set_pte(ptep, pte)
#define cpu_switch_mm(pgd,tsk) cpu_set_pgd(__virt_to_phys((unsigned long)(pgd)))
#define cpu_switch_mm(pgd,mm) cpu_set_pgd(__virt_to_phys((unsigned long)(pgd)),mm)
#define cpu_get_pgd() \
({ \
......
......@@ -44,15 +44,14 @@
#include <asm/memory.h>
#include <asm/page.h>
/* forward declare task_struct */
struct task_struct;
struct mm_struct;
/* declare all the functions as extern */
extern void cpu_data_abort(unsigned long pc);
extern void cpu_check_bugs(void);
extern void cpu_proc_init(void);
extern void cpu_proc_fin(void);
extern int cpu_do_idle(int mode);
extern int cpu_do_idle(void);
extern void cpu_cache_clean_invalidate_all(void);
extern void cpu_cache_clean_invalidate_range(unsigned long address, unsigned long end, int flags);
......@@ -65,13 +64,13 @@ extern void cpu_dcache_clean_entry(unsigned long address);
extern void cpu_icache_invalidate_range(unsigned long start, unsigned long end);
extern void cpu_icache_invalidate_page(void *virt_page);
extern void cpu_set_pgd(unsigned long pgd_phys);
extern void cpu_set_pgd(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_set_pmd(pmd_t *pmdp, pmd_t pmd);
extern void cpu_set_pte(pte_t *ptep, pte_t pte);
extern volatile void cpu_reset(unsigned long addr);
#define cpu_switch_mm(pgd,tsk) cpu_set_pgd(__virt_to_phys((unsigned long)(pgd)))
#define cpu_switch_mm(pgd,mm) cpu_set_pgd(__virt_to_phys((unsigned long)(pgd)),mm)
#define cpu_get_pgd() \
({ \
......
......@@ -26,9 +26,7 @@
#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE)
#ifndef __ASSEMBLY__
extern struct resource sa1111_resource;
#define _SA1111(x) ((x) + sa1111_resource.start)
#define _SA1111(x) ((x) + sa1111->resource.start)
#endif
/*
......@@ -51,7 +49,8 @@ extern struct resource sa1111_resource;
*/
#define __CCREG(x) __REGP(SA1111_VBASE + (x))
/* System Bus Interface (SBI)
/*
* System Bus Interface (SBI)
*
* Registers
* SKCR Control Register
......@@ -127,28 +126,37 @@ extern struct resource sa1111_resource;
* SKPEN1 PWM1 Enable Register
* SKPWM1 PWM1 Clock Register
*/
#define _SKPCR _SA1111(0x0200)
#define _SKCDR _SA1111(0x0204)
#define _SKAUD _SA1111(0x0208)
#define _SKPMC _SA1111(0x020c)
#define _SKPTC _SA1111(0x0210)
#define _SKPEN0 _SA1111(0x0214)
#define _SKPWM0 _SA1111(0x0218)
#define _SKPEN1 _SA1111(0x021c)
#define _SKPWM1 _SA1111(0x0220)
#define SA1111_SKPCR 0x0200
#define SA1111_SKCDR 0x0204
#define SA1111_SKAUD 0x0208
#define SA1111_SKPMC 0x020c
#define SA1111_SKPTC 0x0210
#define SA1111_SKPEN0 0x0214
#define SA1111_SKPWN0 0x0218
#define SA1111_SKPEN1 0x021c
#define SA1111_SKPWM1 0x0220
#define _SKPCR _SA1111(SA1111_SKPCR)
#define _SKCDR _SA1111(SA1111_SKCDR)
#define _SKAUD _SA1111(SA1111_SKAUD)
#define _SKPMC _SA1111(SA1111_SKPMC)
#define _SKPTC _SA1111(SA1111_SKPTC)
#define _SKPEN0 _SA1111(SA1111_SKPEN0)
#define _SKPWM0 _SA1111(SA1111_SKPWM0)
#define _SKPEN1 _SA1111(SA1111_SKPEN1)
#define _SKPWM1 _SA1111(SA1111_SKPWM1)
#if LANGUAGE == C
#define SKPCR __CCREG(0x0200)
#define SKCDR __CCREG(0x0204)
#define SKAUD __CCREG(0x0208)
#define SKPMC __CCREG(0x020c)
#define SKPTC __CCREG(0x0210)
#define SKPEN0 __CCREG(0x0214)
#define SKPWM0 __CCREG(0x0218)
#define SKPEN1 __CCREG(0x021c)
#define SKPWM1 __CCREG(0x0220)
#define SKPCR __CCREG(SA1111_SKPCR)
#define SKCDR __CCREG(SA1111_SKCDR)
#define SKAUD __CCREG(SA1111_SKAUD)
#define SKPMC __CCREG(SA1111_SKPMC)
#define SKPTC __CCREG(SA1111_SKPTC)
#define SKPEN0 __CCREG(SA1111_SKPEN0)
#define SKPWM0 __CCREG(SA1111_SKPWM0)
#define SKPEN1 __CCREG(SA1111_SKPEN1)
#define SKPWM1 __CCREG(SA1111_SKPWM1)
#endif /* LANGUAGE == C */
......@@ -675,4 +683,12 @@ extern struct resource sa1111_resource;
#define PCSSR_S0_SLEEP (1<<0)
#define PCSSR_S1_SLEEP (1<<1)
struct sa1111_device {
struct device dev;
struct resource resource;
void *base;
};
extern struct sa1111_device *sa1111;
#endif /* _ASM_ARCH_SA1111 */
......@@ -22,6 +22,7 @@
#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <asm/memory.h>
......@@ -269,13 +270,22 @@ extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
extern void consistent_sync(void *vaddr, size_t size, int rw);
/*
* FIXME: I'm sure these will need to be changed for DISCONTIG
* Change "struct page" to physical address.
*/
#ifdef CONFIG_DISCONTIG
#define page_to_phys(page) \
((((page) - page_zone(page)->zone_mem_map) << PAGE_SHIFT) \
+ page_zone(page)->zone_start_paddr)
#else
#define page_to_phys(page) \
(PHYS_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
#endif
/*
* Change "struct page" to physical address.
* We should really eliminate virt_to_bus() here - it's depreciated.
*/
#define page_to_phys(page) (PHYS_OFFSET + ((page - mem_map) << PAGE_SHIFT))
#define page_to_bus(page) (PHYS_OFFSET + ((page - mem_map) << PAGE_SHIFT))
#define page_to_bus(page) \
(virt_to_bus(page_address(page)))
/*
* can the hardware map this into one segment or not, given no other
......
......@@ -43,7 +43,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk, unsigned int cpu)
{
if (prev != next)
cpu_switch_mm(next->pgd, tsk);
cpu_switch_mm(next->pgd, next);
}
#define activate_mm(prev, next) \
......
......@@ -95,30 +95,25 @@ pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int di
/* nothing to do */
}
/* Whether pci_unmap_{single,page} is a nop depends upon the
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
* configuration.
*/
#ifdef CONFIG_SA1111
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
__u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) \
((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
(((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) \
((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
#else /* !(CONFIG_SA1111) */
#ifdef CONFIG_PCI
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
#else
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif /* CONFIG_SA1111 */
#endif /* CONFIG_PCI */
/* Map a set of buffers described by scatterlist in streaming
* mode for DMA. This is the scather-gather version of the
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment