Merge

Documentation/kernel-parameters.txt

@@ -90,10 +90,13 @@ running once the system is up.
 			Format: <irq>, default is 13
 
 	acpi=		[HW,ACPI] Advanced Configuration and Power Interface 
-			Format: { force | off | ht }
+			Format: { force | off | ht | strict }
 			force -- enables ACPI for systems with default off
 			off -- disabled ACPI for systems with default on
 			ht -- run only enough ACPI to enable Hyper Threading
+			strict --  Be less tolerant of platforms that are not
+				strictly ACPI specification compliant.
+
 			See also Documentation/pm.txt.
  
 	acpi_pic_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode

arch/i386/kernel/acpi/boot.c

@@ -43,11 +43,12 @@
 
 #define PREFIX			"ACPI: "
 
-int acpi_noirq __initdata = 0;	/* skip ACPI IRQ initialization */
+int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
 int acpi_ht __initdata = 1;	/* enable HT */
 
 int acpi_lapic;
 int acpi_ioapic;
+int acpi_strict;
 
 /* --------------------------------------------------------------------------
                               Boot-time Configuration

arch/i386/kernel/setup.c

@@ -569,6 +569,11 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 			acpi_disabled = 0;
 		}
 
+		/* acpi=strict disables out-of-spec workarounds */
+		else if (!memcmp(from, "acpi=strict", 11)) {
+			acpi_strict = 1;
+		}
+
 		/* Limit ACPI just to boot-time to enable HT */
 		else if (!memcmp(from, "acpi=ht", 7)) {
 			acpi_ht = 1;

arch/x86_64/kernel/acpi/boot.c

@@ -48,11 +48,12 @@
 
 #define PREFIX			"ACPI: "
 
-int acpi_noirq __initdata = 0;	/* skip ACPI IRQ initialization */
+int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
 int acpi_ht __initdata = 1;	/* enable HT */
 
 int acpi_lapic;
 int acpi_ioapic;
+int acpi_strict;
 
 /* --------------------------------------------------------------------------
                               Boot-time Configuration

drivers/acpi/Kconfig

@@ -251,18 +251,6 @@ config ACPI_SYSTEM
 	  This driver will enable your system to shut down using ACPI, and
 	  dump your ACPI DSDT table using /proc/acpi/dsdt.
 
-config ACPI_RELAXED_AML
-	bool "Relaxed AML"
-	depends on ACPI_INTERPRETER
-	depends on !IA64_SGI_SN
-	default n
-	help
-	  If you say `Y' here, the ACPI interpreter will relax its checking
-	  for valid AML and will ignore some AML mistakes, such as off-by-one
-	  errors in region sizes.  Some laptops may require this option.  In
-	  particular, many Toshiba laptops require this for correct operation
-	  of the AC module.
-
 config X86_PM_TIMER
 	bool "Power Management Timer Support"
 	depends on X86 && ACPI

drivers/acpi/executer/exfldio.c

@@ -154,8 +154,7 @@ acpi_ex_setup_region (
 			field_datum_byte_offset, obj_desc->common_field.access_byte_width,
 			acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length));
 
-		#ifdef CONFIG_ACPI_RELAXED_AML
-		{
+		if (!acpi_strict) {
 			/*
 			 * Allow access to the field if it is within the region size
 			 * rounded up to a multiple of the access byte width.  This
@@ -186,9 +185,9 @@ acpi_ex_setup_region (
 				return_ACPI_STATUS (AE_OK);
 			}
 		}
-		#else
+		else {
 			return_ACPI_STATUS (AE_AML_REGION_LIMIT);
-		#endif
+		}
 	}
 
 	return_ACPI_STATUS (AE_OK);

drivers/acpi/hardware/hwgpe.c

@@ -528,6 +528,14 @@ acpi_hw_enable_non_wakeup_gpe_block (
 	/* Examine each GPE register within the block */
 
 	for (i = 0; i < gpe_block->register_count; i++) {
+		/* Clear the entire status register */
+
+		status = acpi_hw_low_level_write (8, 0xFF,
+				 &gpe_block->register_info[i].status_address);
+		if (ACPI_FAILURE (status)) {
+			return (status);
+		}
+
 		/*
 		 * We previously stored the enabled status of all GPEs.
 		 * Blast them back in.

drivers/acpi/hardware/hwregs.c

@@ -152,11 +152,11 @@ acpi_get_sleep_type_data (
 	/*
 	 * Evaluate the namespace object containing the values for this state
 	 */
-	status = acpi_ns_evaluate_by_name ((char *) acpi_gbl_db_sleep_states[sleep_state],
+	status = acpi_ns_evaluate_by_name ((char *) acpi_gbl_sleep_state_names[sleep_state],
 			  NULL, &obj_desc);
 	if (ACPI_FAILURE (status)) {
 		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%s while evaluating sleep_state [%s]\n",
-			acpi_format_exception (status), acpi_gbl_db_sleep_states[sleep_state]));
+			acpi_format_exception (status), acpi_gbl_sleep_state_names[sleep_state]));
 
 		return_ACPI_STATUS (status);
 	}
@@ -201,7 +201,7 @@ acpi_get_sleep_type_data (
 
 	if (ACPI_FAILURE (status)) {
 		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
-			acpi_gbl_db_sleep_states[sleep_state], obj_desc, acpi_ut_get_object_type_name (obj_desc)));
+			acpi_gbl_sleep_state_names[sleep_state], obj_desc, acpi_ut_get_object_type_name (obj_desc)));
 	}
 
 	acpi_ut_remove_reference (obj_desc);

drivers/acpi/hardware/hwsleep.c

@@ -48,6 +48,19 @@
 	 ACPI_MODULE_NAME    ("hwsleep")
 
 
+#define METHOD_NAME__BFS        "\\_BFS"
+#define METHOD_NAME__GTS        "\\_GTS"
+#define METHOD_NAME__PTS        "\\_PTS"
+#define METHOD_NAME__SST        "\\_SI._SST"
+#define METHOD_NAME__WAK        "\\_WAK"
+
+#define ACPI_SST_INDICATOR_OFF  0
+#define ACPI_SST_WORKING        1
+#define ACPI_SST_WAKING         2
+#define ACPI_SST_SLEEPING       3
+#define ACPI_SST_SLEEP_CONTEXT  4
+
+
 /******************************************************************************
  *
  * FUNCTION:    acpi_set_firmware_waking_vector
@@ -171,19 +184,41 @@ acpi_enter_sleep_state_prep (
 
 	/* Run the _PTS and _GTS methods */
 
-	status = acpi_evaluate_object (NULL, "\\_PTS", &arg_list, NULL);
+	status = acpi_evaluate_object (NULL, METHOD_NAME__PTS, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		return_ACPI_STATUS (status);
 	}
 
-	status = acpi_evaluate_object (NULL, "\\_GTS", &arg_list, NULL);
+	status = acpi_evaluate_object (NULL, METHOD_NAME__GTS, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		return_ACPI_STATUS (status);
 	}
 
+	/* Setup the argument to _SST */
+
+	switch (sleep_state) {
+	case ACPI_STATE_S0:
+		arg.integer.value = ACPI_SST_WORKING;
+		break;
+
+	case ACPI_STATE_S1:
+	case ACPI_STATE_S2:
+	case ACPI_STATE_S3:
+		arg.integer.value = ACPI_SST_SLEEPING;
+		break;
+
+	case ACPI_STATE_S4:
+		arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
+		break;
+
+	default:
+		arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is indicator off */
+		break;
+	}
+
 	/* Set the system indicators to show the desired sleep state. */
 
-	status = acpi_evaluate_object (NULL, "\\_SI._SST", &arg_list, NULL);
+	status = acpi_evaluate_object (NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		 ACPI_REPORT_ERROR (("Method _SST failed, %s\n", acpi_format_exception (status)));
 	}
@@ -477,19 +512,19 @@ acpi_leave_sleep_state (
 
 	/* Ignore any errors from these methods */
 
-	arg.integer.value = 0;
-	status = acpi_evaluate_object (NULL, "\\_SI._SST", &arg_list, NULL);
+	arg.integer.value = ACPI_SST_WAKING;
+	status = acpi_evaluate_object (NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		ACPI_REPORT_ERROR (("Method _SST failed, %s\n", acpi_format_exception (status)));
 	}
 
 	arg.integer.value = sleep_state;
-	status = acpi_evaluate_object (NULL, "\\_BFS", &arg_list, NULL);
+	status = acpi_evaluate_object (NULL, METHOD_NAME__BFS, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		ACPI_REPORT_ERROR (("Method _BFS failed, %s\n", acpi_format_exception (status)));
 	}
 
-	status = acpi_evaluate_object (NULL, "\\_WAK", &arg_list, NULL);
+	status = acpi_evaluate_object (NULL, METHOD_NAME__WAK, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
 		ACPI_REPORT_ERROR (("Method _WAK failed, %s\n", acpi_format_exception (status)));
 	}
@@ -501,8 +536,25 @@ acpi_leave_sleep_state (
 		return_ACPI_STATUS (status);
 	}
 
+	/* Enable power button */
+
+	acpi_set_register(acpi_gbl_fixed_event_info[ACPI_EVENT_POWER_BUTTON].enable_register_id,
+			1, ACPI_MTX_DO_NOT_LOCK);
+	acpi_set_register(acpi_gbl_fixed_event_info[ACPI_EVENT_POWER_BUTTON].status_register_id,
+			1, ACPI_MTX_DO_NOT_LOCK);
+
 	/* Enable BM arbitration */
 
 	status = acpi_set_register (ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_LOCK);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	arg.integer.value = ACPI_SST_WORKING;
+	status = acpi_evaluate_object (NULL, METHOD_NAME__SST, &arg_list, NULL);
+	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
+		ACPI_REPORT_ERROR (("Method _SST failed, %s\n", acpi_format_exception (status)));
+	}
+
 	return_ACPI_STATUS (status);
 }

drivers/acpi/namespace/nseval.c

@@ -110,7 +110,7 @@ acpi_ns_evaluate_relative (
 
 	status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE (status)) {
-		return_ACPI_STATUS (status);
+		goto cleanup;
 	}
 
 	prefix_node = acpi_ns_map_handle_to_node (handle);
@@ -197,7 +197,7 @@ acpi_ns_evaluate_by_name (
 
 	status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE (status)) {
-		return_ACPI_STATUS (status);
+		goto cleanup;
 	}
 
 	/* Lookup the name in the namespace */

drivers/acpi/namespace/nsutils.c

@@ -918,7 +918,7 @@ acpi_ns_get_node_by_path (
 
 	status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE (status)) {
-		return_ACPI_STATUS (status);
+		goto cleanup;
 	}
 
 	/* Setup lookup scope (search starting point) */
@@ -936,10 +936,10 @@ acpi_ns_get_node_by_path (
 				internal_path, acpi_format_exception (status)));
 	}
 
-	/* Cleanup */
-
 	(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
 
+cleanup:
+	/* Cleanup */
 	if (internal_path) {
 		ACPI_MEM_FREE (internal_path);
 	}

drivers/acpi/namespace/nsxfname.c

@@ -326,6 +326,13 @@ acpi_get_object_info (
 			info.valid |= ACPI_VALID_ADR;
 		}
 
+		/* Execute the Device._sx_d methods */
+
+		status = acpi_ut_execute_sxds (node, info.highest_dstates);
+		if (ACPI_SUCCESS (status)) {
+			info.valid |= ACPI_VALID_STA;
+		}
+
 		status = AE_OK;
 	}
 

drivers/acpi/resources/rsxface.c

@@ -239,6 +239,7 @@ acpi_walk_resources (
 	acpi_status                         status;
 	struct acpi_buffer                  buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_resource                *resource;
+	struct acpi_resource                *buffer_end;
 
 
 	ACPI_FUNCTION_TRACE ("acpi_walk_resources");
@@ -255,7 +256,13 @@ acpi_walk_resources (
 		return_ACPI_STATUS (status);
 	}
 
+	/* Setup pointers */
+
 	resource  = (struct acpi_resource *) buffer.pointer;
+	buffer_end = (struct acpi_resource *) ((u8 *) buffer.pointer + buffer.length);
+
+	/* Walk the resource list */
+
 	for (;;) {
 		if (!resource || resource->id == ACPI_RSTYPE_END_TAG) {
 			break;
@@ -268,6 +275,7 @@ acpi_walk_resources (
 		case AE_CTRL_DEPTH:
 
 			/* Just keep going */
+
 			status = AE_OK;
 			break;
 
@@ -285,7 +293,15 @@ acpi_walk_resources (
 			goto cleanup;
 		}
 
+		/* Get the next resource descriptor */
+
 		resource = ACPI_NEXT_RESOURCE (resource);
+
+		/* Check for end-of-buffer */
+
+		if (resource >= buffer_end) {
+			goto cleanup;
+		}
 	}
 
 cleanup:

drivers/acpi/utilities/uteval.c

@@ -562,3 +562,63 @@ acpi_ut_execute_STA (
 	acpi_ut_remove_reference (obj_desc);
 	return_ACPI_STATUS (status);
 }
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_execute_Sxds
+ *
+ * PARAMETERS:  device_node         - Node for the device
+ *              *Flags              - Where the status flags are returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Executes _STA for selected device and stores results in
+ *              *Flags.
+ *
+ *              NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_sxds (
+	struct acpi_namespace_node      *device_node,
+	u8                              *highest)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ut_execute_Sxds");
+
+
+	for (i = 0; i < 4; i++) {
+		highest[i] = 0xFF;
+		status = acpi_ut_evaluate_object (device_node,
+				 (char *) acpi_gbl_highest_dstate_names[i],
+				 ACPI_BTYPE_INTEGER, &obj_desc);
+		if (ACPI_FAILURE (status)) {
+			if (status != AE_NOT_FOUND) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+					"%s on Device %4.4s, %s\n",
+					(char *) acpi_gbl_highest_dstate_names[i],
+					acpi_ut_get_node_name (device_node),
+					acpi_format_exception (status)));
+
+				return_ACPI_STATUS (status);
+			}
+		}
+		else {
+			/* Extract the Dstate value */
+
+			highest[i] = (u8) obj_desc->integer.value;
+
+			/* Delete the return object */
+
+			acpi_ut_remove_reference (obj_desc);
+		}
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}

drivers/acpi/utilities/utglobal.c

@@ -171,7 +171,7 @@ u8                                  acpi_gbl_shutdown = TRUE;
 
 const u8                            acpi_gbl_decode_to8bit [8] = {1,2,4,8,16,32,64,128};
 
-const char                          *acpi_gbl_db_sleep_states[ACPI_S_STATE_COUNT] = {
+const char                          *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT] = {
 			  "\\_S0_",
 			  "\\_S1_",
 			  "\\_S2_",
@@ -179,6 +179,11 @@ const char                          *acpi_gbl_db_sleep_states[ACPI_S_STATE_COUNT
 			  "\\_S4_",
 			  "\\_S5_"};
 
+const char                          *acpi_gbl_highest_dstate_names[4] = {
+					   "_S1D",
+					   "_S2D",
+					   "_S3D",
+					   "_S4D"};
 
 /******************************************************************************
  *

include/acpi/acconfig.h

@@ -64,7 +64,7 @@
 
 /* Version string */
 
-#define ACPI_CA_VERSION                 0x20040211
+#define ACPI_CA_VERSION                 0x20040220
 
 /* Maximum objects in the various object caches */
 

include/acpi/acglobal.h

@@ -57,6 +57,12 @@
 #define ACPI_EXTERN extern
 #endif
 
+/*
+ * Keep local copies of these FADT-based registers.  NOTE: These globals
+ * are first in this file for alignment reasons on 64-bit systems.
+ */
+ACPI_EXTERN struct acpi_generic_address         acpi_gbl_xpm1a_enable;
+ACPI_EXTERN struct acpi_generic_address         acpi_gbl_xpm1b_enable;
 
 /*****************************************************************************
  *
@@ -97,6 +103,11 @@ ACPI_EXTERN FADT_DESCRIPTOR            *acpi_gbl_FADT;
 ACPI_EXTERN struct acpi_table_header           *acpi_gbl_DSDT;
 ACPI_EXTERN FACS_DESCRIPTOR            *acpi_gbl_FACS;
 ACPI_EXTERN struct acpi_common_facs             acpi_gbl_common_fACS;
+/*
+ * Since there may be multiple SSDTs and PSDTS, a single pointer is not
+ * sufficient; Therefore, there isn't one!
+ */
+
 
 /*
  * Handle both ACPI 1.0 and ACPI 2.0 Integer widths
@@ -107,17 +118,6 @@ ACPI_EXTERN u8                                  acpi_gbl_integer_bit_width;
 ACPI_EXTERN u8                                  acpi_gbl_integer_byte_width;
 ACPI_EXTERN u8                                  acpi_gbl_integer_nybble_width;
 
-/* Keep local copies of these FADT-based registers */
-
-ACPI_EXTERN struct acpi_generic_address         acpi_gbl_xpm1a_enable;
-ACPI_EXTERN struct acpi_generic_address         acpi_gbl_xpm1b_enable;
-
-/*
- * Since there may be multiple SSDTs and PSDTS, a single pointer is not
- * sufficient; Therefore, there isn't one!
- */
-
-
 /*
  * ACPI Table info arrays
  */
@@ -165,7 +165,8 @@ ACPI_EXTERN u8                                  acpi_gbl_events_initialized;
 extern u8                                       acpi_gbl_shutdown;
 extern u32                                      acpi_gbl_startup_flags;
 extern const u8                                 acpi_gbl_decode_to8bit[8];
-extern const char                              *acpi_gbl_db_sleep_states[ACPI_S_STATE_COUNT];
+extern const char                              *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT];
+extern const char                              *acpi_gbl_highest_dstate_names[4];
 extern const struct acpi_opcode_info            acpi_gbl_aml_op_info[AML_NUM_OPCODES];
 extern const char                              *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
 

include/acpi/actypes.h

@@ -880,7 +880,8 @@ struct acpi_device_info
 {
 	ACPI_COMMON_OBJ_INFO;
 
-	u32                                 valid;              /* Indicates which fields are valid */
+	u8                                  highest_dstates[4]; /* _sx_d values 0xFF indicates not valid */
+	u32                                 valid;              /* Indicates which fields below are valid */
 	u32                                 current_status;     /* _STA value */
 	acpi_integer                        address;            /* _ADR value if any */
 	struct acpi_device_id               hardware_id;        /* _HID value if any */

include/acpi/acutils.h

@@ -508,6 +508,10 @@ acpi_ut_execute_UID (
 	struct acpi_namespace_node      *device_node,
 	struct acpi_device_id           *uid);
 
+acpi_status
+acpi_ut_execute_sxds (
+	struct acpi_namespace_node      *device_node,
+	u8                              *highest);
 
 /*
  * ut_mutex - mutual exclusion interfaces

include/asm-i386/acpi.h

@@ -110,6 +110,7 @@
 extern int acpi_lapic;
 extern int acpi_ioapic;
 extern int acpi_noirq;
+extern int acpi_strict;
 
 /* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
 #define FIX_ACPI_PAGES 4

include/asm-ia64/acpi.h

@@ -88,6 +88,8 @@ ia64_acpi_release_global_lock (unsigned int *lock)
 #define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq)				\
 	((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
 
+#define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+
 const char *acpi_get_sysname (void);
 int acpi_request_vector (u32 int_type);
 int acpi_register_irq (u32 gsi, u32 polarity, u32 trigger);

include/asm-x86_64/acpi.h

@@ -104,6 +104,7 @@ __acpi_release_global_lock (unsigned int *lock)
 extern int acpi_lapic;
 extern int acpi_ioapic;
 extern int acpi_noirq;
+extern int acpi_strict;
 
 /* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
 #define FIX_ACPI_PAGES 4