Commit 532df6f3 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (277 commits)
  [SCSI] isci: fix checkpatch errors
  isci: Device reset should request sas_phy_reset(phy, true)
  isci: pare back error messsages
  isci: cleanup silicon revision detection
  isci: merge scu_unsolicited_frame.h into unsolicited_frame_control.h
  isci: merge sata.[ch] into request.c
  isci: kill 'get/set' macros
  isci: retire scic_sds_ and scic_ prefixes
  isci: unify isci_host and scic_sds_controller
  isci: unify isci_remote_device and scic_sds_remote_device
  isci: unify isci_port and scic_sds_port
  isci: fix scic_sds_remote_device_terminate_requests
  isci: unify isci_phy and scic_sds_phy
  isci: unify isci_request and scic_sds_request
  isci: rename / clean up scic_sds_stp_request
  isci: preallocate requests
  isci: combine request flags
  isci: unify can_queue tracking on the tci_pool, uplevel tag assignment
  isci: Terminate dev requests on FIS err bit rx in NCQ
  isci: fix frame received locking
  ...
parents fc52693f a5ec7f86
...@@ -830,6 +830,19 @@ config SCSI_GDTH ...@@ -830,6 +830,19 @@ config SCSI_GDTH
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called gdth. module will be called gdth.
config SCSI_ISCI
tristate "Intel(R) C600 Series Chipset SAS Controller"
depends on PCI && SCSI
depends on X86
# (temporary): known alpha quality driver
depends on EXPERIMENTAL
select SCSI_SAS_LIBSAS
---help---
This driver supports the 6Gb/s SAS capabilities of the storage
control unit found in the Intel(R) C600 series chipset.
The experimental tag will be removed after the driver exits alpha
config SCSI_GENERIC_NCR5380 config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support" tristate "Generic NCR5380/53c400 SCSI PIO support"
depends on ISA && SCSI depends on ISA && SCSI
......
...@@ -73,6 +73,7 @@ obj-$(CONFIG_SCSI_AACRAID) += aacraid/ ...@@ -73,6 +73,7 @@ obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
......
...@@ -1037,6 +1037,7 @@ static void complete_scsi_command(struct CommandList *cp) ...@@ -1037,6 +1037,7 @@ static void complete_scsi_command(struct CommandList *cp)
unsigned char sense_key; unsigned char sense_key;
unsigned char asc; /* additional sense code */ unsigned char asc; /* additional sense code */
unsigned char ascq; /* additional sense code qualifier */ unsigned char ascq; /* additional sense code qualifier */
unsigned long sense_data_size;
ei = cp->err_info; ei = cp->err_info;
cmd = (struct scsi_cmnd *) cp->scsi_cmd; cmd = (struct scsi_cmnd *) cp->scsi_cmd;
...@@ -1051,10 +1052,14 @@ static void complete_scsi_command(struct CommandList *cp) ...@@ -1051,10 +1052,14 @@ static void complete_scsi_command(struct CommandList *cp)
cmd->result |= ei->ScsiStatus; cmd->result |= ei->ScsiStatus;
/* copy the sense data whether we need to or not. */ /* copy the sense data whether we need to or not. */
memcpy(cmd->sense_buffer, ei->SenseInfo, if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? sense_data_size = SCSI_SENSE_BUFFERSIZE;
SCSI_SENSE_BUFFERSIZE : else
ei->SenseLen); sense_data_size = sizeof(ei->SenseInfo);
if (ei->SenseLen < sense_data_size)
sense_data_size = ei->SenseLen;
memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
scsi_set_resid(cmd, ei->ResidualCnt); scsi_set_resid(cmd, ei->ResidualCnt);
if (ei->CommandStatus == 0) { if (ei->CommandStatus == 0) {
...@@ -2580,6 +2585,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) ...@@ -2580,6 +2585,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c->SG[0].Ext = 0; /* we are not chaining*/ c->SG[0].Ext = 0; /* we are not chaining*/
} }
hpsa_scsi_do_simple_cmd_core(h, c); hpsa_scsi_do_simple_cmd_core(h, c);
if (iocommand.buf_size > 0)
hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c); check_ioctl_unit_attention(h, c);
......
...@@ -4306,7 +4306,7 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost) ...@@ -4306,7 +4306,7 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
spin_lock_irqsave(vhost->host->host_lock, flags); spin_lock_irqsave(vhost->host->host_lock, flags);
if (rc == H_CLOSED) if (rc == H_CLOSED)
vio_enable_interrupts(to_vio_dev(vhost->dev)); vio_enable_interrupts(to_vio_dev(vhost->dev));
else if (rc || (rc = ibmvfc_send_crq_init(vhost)) || if (rc || (rc = ibmvfc_send_crq_init(vhost)) ||
(rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) {
ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD); ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc); dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc);
......
obj-$(CONFIG_SCSI_ISCI) += isci.o
isci-objs := init.o phy.o request.o \
remote_device.o port.o \
host.o task.o probe_roms.o \
remote_node_context.o \
remote_node_table.o \
unsolicited_frame_control.o \
port_config.o \
# Makefile for create_fw
#
CC=gcc
CFLAGS=-c -Wall -O2 -g
LDFLAGS=
SOURCES=create_fw.c
OBJECTS=$(SOURCES:.cpp=.o)
EXECUTABLE=create_fw
all: $(SOURCES) $(EXECUTABLE)
$(EXECUTABLE): $(OBJECTS)
$(CC) $(LDFLAGS) $(OBJECTS) -o $@
.c.o:
$(CC) $(CFLAGS) $< -O $@
clean:
rm -f *.o $(EXECUTABLE)
This defines the temporary binary blow we are to pass to the SCU
driver to emulate the binary firmware that we will eventually be
able to access via NVRAM on the SCU controller.
The current size of the binary blob is expected to be 149 bytes or larger
Header Types:
0x1: Phy Masks
0x2: Phy Gens
0x3: SAS Addrs
0xff: End of Data
ID string - u8[12]: "#SCU MAGIC#\0"
Version - u8: 1
SubVersion - u8: 0
Header Type - u8: 0x1
Size - u8: 8
Phy Mask - u32[8]
Header Type - u8: 0x2
Size - u8: 8
Phy Gen - u32[8]
Header Type - u8: 0x3
Size - u8: 8
Sas Addr - u64[8]
Header Type - u8: 0xf
==============================================================================
Place isci_firmware.bin in /lib/firmware
Be sure to recreate the initramfs image to include the firmware.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <errno.h>
#include <asm/types.h>
#include <strings.h>
#include <stdint.h>
#include "create_fw.h"
#include "../probe_roms.h"
int write_blob(struct isci_orom *isci_orom)
{
FILE *fd;
int err;
size_t count;
fd = fopen(blob_name, "w+");
if (!fd) {
perror("Open file for write failed");
fclose(fd);
return -EIO;
}
count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd);
if (count != 1) {
perror("Write data failed");
fclose(fd);
return -EIO;
}
fclose(fd);
return 0;
}
void set_binary_values(struct isci_orom *isci_orom)
{
int ctrl_idx, phy_idx, port_idx;
/* setting OROM signature */
strncpy(isci_orom->hdr.signature, sig, strlen(sig));
isci_orom->hdr.version = version;
isci_orom->hdr.total_block_length = sizeof(struct isci_orom);
isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr);
isci_orom->hdr.num_elements = num_elements;
for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) {
isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type;
isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up =
max_num_concurrent_dev_spin_up;
isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc =
enable_ssc;
for (port_idx = 0; port_idx < 4; port_idx++)
isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask =
phy_mask[ctrl_idx][port_idx];
for (phy_idx = 0; phy_idx < 4; phy_idx++) {
isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high =
(__u32)(sas_addr[ctrl_idx][phy_idx] >> 32);
isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low =
(__u32)(sas_addr[ctrl_idx][phy_idx]);
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 =
afe_tx_amp_control0;
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 =
afe_tx_amp_control1;
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 =
afe_tx_amp_control2;
isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 =
afe_tx_amp_control3;
}
}
}
int main(void)
{
int err;
struct isci_orom *isci_orom;
isci_orom = malloc(sizeof(struct isci_orom));
memset(isci_orom, 0, sizeof(struct isci_orom));
set_binary_values(isci_orom);
err = write_blob(isci_orom);
if (err < 0) {
free(isci_orom);
return err;
}
free(isci_orom);
return 0;
}
#ifndef _CREATE_FW_H_
#define _CREATE_FW_H_
#include "../probe_roms.h"
/* we are configuring for 2 SCUs */
static const int num_elements = 2;
/*
* For all defined arrays:
* elements 0-3 are for SCU0, ports 0-3
* elements 4-7 are for SCU1, ports 0-3
*
* valid configurations for one SCU are:
* P0 P1 P2 P3
* ----------------
* 0xF,0x0,0x0,0x0 # 1 x4 port
* 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
* # ports
* 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
* # port
* 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
* 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
*
* if there is a port/phy on which you do not wish to override the default
* values, use the value assigned to UNINIT_PARAM (255).
*/
/* discovery mode type (port auto config mode by default ) */
/*
* if there is a port/phy on which you do not wish to override the default
* values, use the value "0000000000000000". SAS address of zero's is
* considered invalid and will not be used.
*/
#ifdef MPC
static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
{1, 2, 4, 8} };
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
0x5FCFFFFFF0000002ULL,
0x5FCFFFFFF0000003ULL,
0x5FCFFFFFF0000004ULL },
{ 0x5FCFFFFFF0000005ULL,
0x5FCFFFFFF0000006ULL,
0x5FCFFFFFF0000007ULL,
0x5FCFFFFFF0000008ULL } };
#else /* APC (default) */
static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
static const __u8 phy_mask[2][4];
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
0x5FCFFFFF00000001ULL,
0x5FCFFFFF00000001ULL,
0x5FCFFFFF00000001ULL },
{ 0x5FCFFFFF00000002ULL,
0x5FCFFFFF00000002ULL,
0x5FCFFFFF00000002ULL,
0x5FCFFFFF00000002ULL } };
#endif
/* Maximum number of concurrent device spin up */
static const int max_num_concurrent_dev_spin_up = 1;
/* enable of ssc operation */
static const int enable_ssc;
/* AFE_TX_AMP_CONTROL */
static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
static const char blob_name[] = "isci_firmware.bin";
static const char sig[] = "ISCUOEMB";
static const unsigned char version = 0x10;
#endif
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*/
/* probe_roms - scan for oem parameters */
#include <linux/kernel.h>
#include <linux/firmware.h>
#include <linux/uaccess.h>
#include <linux/efi.h>
#include <asm/probe_roms.h>
#include "isci.h"
#include "task.h"
#include "probe_roms.h"
static efi_char16_t isci_efivar_name[] = {
'R', 's', 't', 'S', 'c', 'u', 'O'
};
struct isci_orom *isci_request_oprom(struct pci_dev *pdev)
{
void __iomem *oprom = pci_map_biosrom(pdev);
struct isci_orom *rom = NULL;
size_t len, i;
int j;
char oem_sig[4];
struct isci_oem_hdr oem_hdr;
u8 *tmp, sum;
if (!oprom)
return NULL;
len = pci_biosrom_size(pdev);
rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL);
if (!rom) {
dev_warn(&pdev->dev,
"Unable to allocate memory for orom\n");
return NULL;
}
for (i = 0; i < len && rom; i += ISCI_OEM_SIG_SIZE) {
memcpy_fromio(oem_sig, oprom + i, ISCI_OEM_SIG_SIZE);
/* we think we found the OEM table */
if (memcmp(oem_sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) == 0) {
size_t copy_len;
memcpy_fromio(&oem_hdr, oprom + i, sizeof(oem_hdr));
copy_len = min(oem_hdr.len - sizeof(oem_hdr),
sizeof(*rom));
memcpy_fromio(rom,
oprom + i + sizeof(oem_hdr),
copy_len);
/* calculate checksum */
tmp = (u8 *)&oem_hdr;
for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++)
sum += *tmp;
tmp = (u8 *)rom;
for (j = 0; j < sizeof(*rom); j++, tmp++)
sum += *tmp;
if (sum != 0) {
dev_warn(&pdev->dev,
"OEM table checksum failed\n");
continue;
}
/* keep going if that's not the oem param table */
if (memcmp(rom->hdr.signature,
ISCI_ROM_SIG,
ISCI_ROM_SIG_SIZE) != 0)
continue;
dev_info(&pdev->dev,
"OEM parameter table found in OROM\n");
break;
}
}
if (i >= len) {
dev_err(&pdev->dev, "oprom parse error\n");
devm_kfree(&pdev->dev, rom);
rom = NULL;
}
pci_unmap_biosrom(oprom);
return rom;
}
enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem,
struct isci_orom *orom, int scu_index)
{
/* check for valid inputs */
if (scu_index < 0 || scu_index >= SCI_MAX_CONTROLLERS ||
scu_index > orom->hdr.num_elements || !oem)
return -EINVAL;
*oem = orom->ctrl[scu_index];
return 0;
}
struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw)
{
struct isci_orom *orom = NULL, *data;
int i, j;
if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0)
return NULL;
if (fw->size < sizeof(*orom))
goto out;
data = (struct isci_orom *)fw->data;
if (strncmp(ISCI_ROM_SIG, data->hdr.signature,
strlen(ISCI_ROM_SIG)) != 0)
goto out;
orom = devm_kzalloc(&pdev->dev, fw->size, GFP_KERNEL);
if (!orom)
goto out;
memcpy(orom, fw->data, fw->size);
if (is_c0(pdev))
goto out;
/*
* deprecated: override default amp_control for pre-preproduction
* silicon revisions
*/
for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++)
for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) {
orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03;
orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03;
orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03;
orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03;
}
out:
release_firmware(fw);
return orom;
}
static struct efi *get_efi(void)
{
#ifdef CONFIG_EFI
return &efi;
#else
return NULL;
#endif
}
struct isci_orom *isci_get_efi_var(struct pci_dev *pdev)
{
efi_status_t status;
struct isci_orom *rom;
struct isci_oem_hdr *oem_hdr;
u8 *tmp, sum;
int j;
unsigned long data_len;
u8 *efi_data;
u32 efi_attrib = 0;
data_len = 1024;
efi_data = devm_kzalloc(&pdev->dev, data_len, GFP_KERNEL);
if (!efi_data) {
dev_warn(&pdev->dev,
"Unable to allocate memory for EFI data\n");
return NULL;
}
rom = (struct isci_orom *)(efi_data + sizeof(struct isci_oem_hdr));
if (get_efi())
status = get_efi()->get_variable(isci_efivar_name,
&ISCI_EFI_VENDOR_GUID,
&efi_attrib,
&data_len,
efi_data);
else
status = EFI_NOT_FOUND;
if (status != EFI_SUCCESS) {
dev_warn(&pdev->dev,
"Unable to obtain EFI var data for OEM parms\n");
return NULL;
}
oem_hdr = (struct isci_oem_hdr *)efi_data;
if (memcmp(oem_hdr->sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) != 0) {
dev_warn(&pdev->dev,
"Invalid OEM header signature\n");
return NULL;
}
/* calculate checksum */
tmp = (u8 *)efi_data;
for (j = 0, sum = 0; j < (sizeof(*oem_hdr) + sizeof(*rom)); j++, tmp++)
sum += *tmp;
if (sum != 0) {
dev_warn(&pdev->dev,
"OEM table checksum failed\n");
return NULL;
}
if (memcmp(rom->hdr.signature,
ISCI_ROM_SIG,
ISCI_ROM_SIG_SIZE) != 0) {
dev_warn(&pdev->dev,
"Invalid OEM table signature\n");
return NULL;
}
return rom;
}
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -82,6 +82,7 @@ fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ ...@@ -82,6 +82,7 @@ fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin advansys/3550.bin advansys/38C0800.bin
fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \ fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
......
:10000000495343554F454D42E80018100002000087
:1000100000000000000000000101000000000000DE
:10002000FFFFCF5F0100000008DD0B0000FC0F00A8
:10003000097C0B006EFC0A00FFFFCF5F010000008F
:1000400008DD0B0000FC0F00097C0B006EFC0A00B1
:10005000FFFFCF5F0100000008DD0B0000FC0F0078
:10006000097C0B006EFC0A00FFFFCF5F010000005F
:1000700008DD0B0000FC0F00097C0B006EFC0A0081
:100080000101000000000000FFFFCF5F0200000040
:1000900008DD0B0000FC0F00097C0B006EFC0A0061
:1000A000FFFFCF5F0200000008DD0B0000FC0F0027
:1000B000097C0B006EFC0A00FFFFCF5F020000000E
:1000C00008DD0B0000FC0F00097C0B006EFC0A0031
:1000D000FFFFCF5F0200000008DD0B0000FC0F00F7
:0800E000097C0B006EFC0A0014
:00000001FF
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment