Commit 534e14e2 authored by Jun Nie's avatar Jun Nie Committed by Greg Kroah-Hartman

uart: pl011: Rename regs with enumeration

Rename regs with enumeration to generalize register names.
Signed-off-by: default avatarJun Nie <jun.nie@linaro.org>
Reviewed-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarJun Nie <jun.nie@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 89c043a6
...@@ -85,6 +85,25 @@ struct vendor_data { ...@@ -85,6 +85,25 @@ struct vendor_data {
unsigned int (*get_fifosize)(struct amba_device *dev); unsigned int (*get_fifosize)(struct amba_device *dev);
}; };
enum reg_idx {
REG_DR = UART01x_DR,
REG_RSR = UART01x_RSR,
REG_ST_DMAWM = ST_UART011_DMAWM,
REG_FR = UART01x_FR,
REG_ST_LCRH_RX = ST_UART011_LCRH_RX,
REG_ILPR = UART01x_ILPR,
REG_IBRD = UART011_IBRD,
REG_FBRD = UART011_FBRD,
REG_LCRH = UART011_LCRH,
REG_CR = UART011_CR,
REG_IFLS = UART011_IFLS,
REG_IMSC = UART011_IMSC,
REG_RIS = UART011_RIS,
REG_MIS = UART011_MIS,
REG_ICR = UART011_ICR,
REG_DMACR = UART011_DMACR,
};
static unsigned int get_fifosize_arm(struct amba_device *dev) static unsigned int get_fifosize_arm(struct amba_device *dev)
{ {
return amba_rev(dev) < 3 ? 16 : 32; return amba_rev(dev) < 3 ? 16 : 32;
...@@ -92,8 +111,8 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) ...@@ -92,8 +111,8 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = { static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
.lcrh_tx = UART011_LCRH, .lcrh_tx = REG_LCRH,
.lcrh_rx = UART011_LCRH, .lcrh_rx = REG_LCRH,
.oversampling = false, .oversampling = false,
.dma_threshold = false, .dma_threshold = false,
.cts_event_workaround = false, .cts_event_workaround = false,
...@@ -117,8 +136,8 @@ static unsigned int get_fifosize_st(struct amba_device *dev) ...@@ -117,8 +136,8 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = { static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
.lcrh_tx = ST_UART011_LCRH_TX, .lcrh_tx = REG_LCRH,
.lcrh_rx = ST_UART011_LCRH_RX, .lcrh_rx = REG_ST_LCRH_RX,
.oversampling = true, .oversampling = true,
.dma_threshold = true, .dma_threshold = true,
.cts_event_workaround = true, .cts_event_workaround = true,
...@@ -196,12 +215,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) ...@@ -196,12 +215,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
int fifotaken = 0; int fifotaken = 0;
while (max_count--) { while (max_count--) {
status = readw(uap->port.membase + UART01x_FR); status = readw(uap->port.membase + REG_FR);
if (status & UART01x_FR_RXFE) if (status & UART01x_FR_RXFE)
break; break;
/* Take chars from the FIFO and update status */ /* Take chars from the FIFO and update status */
ch = readw(uap->port.membase + UART01x_DR) | ch = readw(uap->port.membase + REG_DR) |
UART_DUMMY_DR_RX; UART_DUMMY_DR_RX;
flag = TTY_NORMAL; flag = TTY_NORMAL;
uap->port.icount.rx++; uap->port.icount.rx++;
...@@ -284,7 +303,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) ...@@ -284,7 +303,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev);
struct device *dev = uap->port.dev; struct device *dev = uap->port.dev;
struct dma_slave_config tx_conf = { struct dma_slave_config tx_conf = {
.dst_addr = uap->port.mapbase + UART01x_DR, .dst_addr = uap->port.mapbase + REG_DR,
.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.direction = DMA_MEM_TO_DEV, .direction = DMA_MEM_TO_DEV,
.dst_maxburst = uap->fifosize >> 1, .dst_maxburst = uap->fifosize >> 1,
...@@ -339,7 +358,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) ...@@ -339,7 +358,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
if (chan) { if (chan) {
struct dma_slave_config rx_conf = { struct dma_slave_config rx_conf = {
.src_addr = uap->port.mapbase + UART01x_DR, .src_addr = uap->port.mapbase + REG_DR,
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.direction = DMA_DEV_TO_MEM, .direction = DMA_DEV_TO_MEM,
.src_maxburst = uap->fifosize >> 2, .src_maxburst = uap->fifosize >> 2,
...@@ -438,7 +457,7 @@ static void pl011_dma_tx_callback(void *data) ...@@ -438,7 +457,7 @@ static void pl011_dma_tx_callback(void *data)
dmacr = uap->dmacr; dmacr = uap->dmacr;
uap->dmacr = dmacr & ~UART011_TXDMAE; uap->dmacr = dmacr & ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
/* /*
* If TX DMA was disabled, it means that we've stopped the DMA for * If TX DMA was disabled, it means that we've stopped the DMA for
...@@ -552,7 +571,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) ...@@ -552,7 +571,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
dma_dev->device_issue_pending(chan); dma_dev->device_issue_pending(chan);
uap->dmacr |= UART011_TXDMAE; uap->dmacr |= UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->dmatx.queued = true; uap->dmatx.queued = true;
/* /*
...@@ -588,9 +607,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) ...@@ -588,9 +607,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/ */
if (uap->dmatx.queued) { if (uap->dmatx.queued) {
uap->dmacr |= UART011_TXDMAE; uap->dmacr |= UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->im &= ~UART011_TXIM; uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
return true; return true;
} }
...@@ -600,7 +619,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) ...@@ -600,7 +619,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/ */
if (pl011_dma_tx_refill(uap) > 0) { if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM; uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
return true; return true;
} }
return false; return false;
...@@ -614,7 +633,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) ...@@ -614,7 +633,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
{ {
if (uap->dmatx.queued) { if (uap->dmatx.queued) {
uap->dmacr &= ~UART011_TXDMAE; uap->dmacr &= ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
} }
} }
...@@ -641,13 +660,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) ...@@ -641,13 +660,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
if (pl011_dma_tx_refill(uap) > 0) { if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM; uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + writew(uap->im, uap->port.membase +
UART011_IMSC); REG_IMSC);
} else } else
ret = false; ret = false;
} else if (!(uap->dmacr & UART011_TXDMAE)) { } else if (!(uap->dmacr & UART011_TXDMAE)) {
uap->dmacr |= UART011_TXDMAE; uap->dmacr |= UART011_TXDMAE;
writew(uap->dmacr, writew(uap->dmacr,
uap->port.membase + UART011_DMACR); uap->port.membase + REG_DMACR);
} }
return ret; return ret;
} }
...@@ -658,9 +677,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) ...@@ -658,9 +677,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
*/ */
dmacr = uap->dmacr; dmacr = uap->dmacr;
uap->dmacr &= ~UART011_TXDMAE; uap->dmacr &= ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { if (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) {
/* /*
* No space in the FIFO, so enable the transmit interrupt * No space in the FIFO, so enable the transmit interrupt
* so we know when there is space. Note that once we've * so we know when there is space. Note that once we've
...@@ -669,13 +688,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) ...@@ -669,13 +688,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
return false; return false;
} }
writew(uap->port.x_char, uap->port.membase + UART01x_DR); writew(uap->port.x_char, uap->port.membase + REG_DR);
uap->port.icount.tx++; uap->port.icount.tx++;
uap->port.x_char = 0; uap->port.x_char = 0;
/* Success - restore the DMA state */ /* Success - restore the DMA state */
uap->dmacr = dmacr; uap->dmacr = dmacr;
writew(dmacr, uap->port.membase + UART011_DMACR); writew(dmacr, uap->port.membase + REG_DMACR);
return true; return true;
} }
...@@ -703,7 +722,7 @@ __acquires(&uap->port.lock) ...@@ -703,7 +722,7 @@ __acquires(&uap->port.lock)
DMA_TO_DEVICE); DMA_TO_DEVICE);
uap->dmatx.queued = false; uap->dmatx.queued = false;
uap->dmacr &= ~UART011_TXDMAE; uap->dmacr &= ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
} }
} }
...@@ -743,11 +762,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) ...@@ -743,11 +762,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
dma_async_issue_pending(rxchan); dma_async_issue_pending(rxchan);
uap->dmacr |= UART011_RXDMAE; uap->dmacr |= UART011_RXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->dmarx.running = true; uap->dmarx.running = true;
uap->im &= ~UART011_RXIM; uap->im &= ~UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
return 0; return 0;
} }
...@@ -806,7 +825,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, ...@@ -806,7 +825,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
if (dma_count == pending && readfifo) { if (dma_count == pending && readfifo) {
/* Clear any error flags */ /* Clear any error flags */
writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
uap->port.membase + UART011_ICR); uap->port.membase + REG_ICR);
/* /*
* If we read all the DMA'd characters, and we had an * If we read all the DMA'd characters, and we had an
...@@ -854,7 +873,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) ...@@ -854,7 +873,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
/* Disable RX DMA - incoming data will wait in the FIFO */ /* Disable RX DMA - incoming data will wait in the FIFO */
uap->dmacr &= ~UART011_RXDMAE; uap->dmacr &= ~UART011_RXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->dmarx.running = false; uap->dmarx.running = false;
pending = sgbuf->sg.length - state.residue; pending = sgbuf->sg.length - state.residue;
...@@ -874,7 +893,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) ...@@ -874,7 +893,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job " dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n"); "fall back to interrupt mode\n");
uap->im |= UART011_RXIM; uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
} }
} }
...@@ -922,7 +941,7 @@ static void pl011_dma_rx_callback(void *data) ...@@ -922,7 +941,7 @@ static void pl011_dma_rx_callback(void *data)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job " dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n"); "fall back to interrupt mode\n");
uap->im |= UART011_RXIM; uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
} }
} }
...@@ -935,7 +954,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) ...@@ -935,7 +954,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
{ {
/* FIXME. Just disable the DMA enable */ /* FIXME. Just disable the DMA enable */
uap->dmacr &= ~UART011_RXDMAE; uap->dmacr &= ~UART011_RXDMAE;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
} }
/* /*
...@@ -979,7 +998,7 @@ static void pl011_dma_rx_poll(unsigned long args) ...@@ -979,7 +998,7 @@ static void pl011_dma_rx_poll(unsigned long args)
spin_lock_irqsave(&uap->port.lock, flags); spin_lock_irqsave(&uap->port.lock, flags);
pl011_dma_rx_stop(uap); pl011_dma_rx_stop(uap);
uap->im |= UART011_RXIM; uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
spin_unlock_irqrestore(&uap->port.lock, flags); spin_unlock_irqrestore(&uap->port.lock, flags);
uap->dmarx.running = false; uap->dmarx.running = false;
...@@ -1041,7 +1060,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) ...@@ -1041,7 +1060,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
skip_rx: skip_rx:
/* Turn on DMA error (RX/TX will be enabled on demand) */ /* Turn on DMA error (RX/TX will be enabled on demand) */
uap->dmacr |= UART011_DMAONERR; uap->dmacr |= UART011_DMAONERR;
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
/* /*
* ST Micro variants has some specific dma burst threshold * ST Micro variants has some specific dma burst threshold
...@@ -1050,7 +1069,8 @@ static void pl011_dma_startup(struct uart_amba_port *uap) ...@@ -1050,7 +1069,8 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
*/ */
if (uap->vendor->dma_threshold) if (uap->vendor->dma_threshold)
writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
uap->port.membase + ST_UART011_DMAWM); uap->port.membase + REG_ST_DMAWM);
if (uap->using_rx_dma) { if (uap->using_rx_dma) {
if (pl011_dma_rx_trigger_dma(uap)) if (pl011_dma_rx_trigger_dma(uap))
...@@ -1075,12 +1095,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) ...@@ -1075,12 +1095,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return; return;
/* Disable RX and TX DMA */ /* Disable RX and TX DMA */
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) while (readw(uap->port.membase + REG_FR) & UART01x_FR_BUSY)
barrier(); barrier();
spin_lock_irq(&uap->port.lock); spin_lock_irq(&uap->port.lock);
uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
writew(uap->dmacr, uap->port.membase + UART011_DMACR); writew(uap->dmacr, uap->port.membase + REG_DMACR);
spin_unlock_irq(&uap->port.lock); spin_unlock_irq(&uap->port.lock);
if (uap->using_tx_dma) { if (uap->using_tx_dma) {
...@@ -1181,7 +1201,7 @@ static void pl011_stop_tx(struct uart_port *port) ...@@ -1181,7 +1201,7 @@ static void pl011_stop_tx(struct uart_port *port)
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
uap->im &= ~UART011_TXIM; uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
pl011_dma_tx_stop(uap); pl011_dma_tx_stop(uap);
} }
...@@ -1191,7 +1211,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); ...@@ -1191,7 +1211,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
static void pl011_start_tx_pio(struct uart_amba_port *uap) static void pl011_start_tx_pio(struct uart_amba_port *uap)
{ {
uap->im |= UART011_TXIM; uap->im |= UART011_TXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
pl011_tx_chars(uap, false); pl011_tx_chars(uap, false);
} }
...@@ -1211,7 +1231,7 @@ static void pl011_stop_rx(struct uart_port *port) ...@@ -1211,7 +1231,7 @@ static void pl011_stop_rx(struct uart_port *port)
uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
UART011_PEIM|UART011_BEIM|UART011_OEIM); UART011_PEIM|UART011_BEIM|UART011_OEIM);
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
pl011_dma_rx_stop(uap); pl011_dma_rx_stop(uap);
} }
...@@ -1222,7 +1242,7 @@ static void pl011_enable_ms(struct uart_port *port) ...@@ -1222,7 +1242,7 @@ static void pl011_enable_ms(struct uart_port *port)
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
} }
static void pl011_rx_chars(struct uart_amba_port *uap) static void pl011_rx_chars(struct uart_amba_port *uap)
...@@ -1242,7 +1262,7 @@ __acquires(&uap->port.lock) ...@@ -1242,7 +1262,7 @@ __acquires(&uap->port.lock)
dev_dbg(uap->port.dev, "could not trigger RX DMA job " dev_dbg(uap->port.dev, "could not trigger RX DMA job "
"fall back to interrupt mode again\n"); "fall back to interrupt mode again\n");
uap->im |= UART011_RXIM; uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
} else { } else {
#ifdef CONFIG_DMA_ENGINE #ifdef CONFIG_DMA_ENGINE
/* Start Rx DMA poll */ /* Start Rx DMA poll */
...@@ -1263,10 +1283,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, ...@@ -1263,10 +1283,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
bool from_irq) bool from_irq)
{ {
if (unlikely(!from_irq) && if (unlikely(!from_irq) &&
readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
return false; /* unable to transmit character */ return false; /* unable to transmit character */
writew(c, uap->port.membase + UART01x_DR); writew(c, uap->port.membase + REG_DR);
uap->port.icount.tx++; uap->port.icount.tx++;
return true; return true;
...@@ -1313,7 +1333,7 @@ static void pl011_modem_status(struct uart_amba_port *uap) ...@@ -1313,7 +1333,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
{ {
unsigned int status, delta; unsigned int status, delta;
status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; status = readw(uap->port.membase + REG_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status; delta = status ^ uap->old_status;
uap->old_status = status; uap->old_status = status;
...@@ -1341,15 +1361,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap) ...@@ -1341,15 +1361,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
return; return;
/* workaround to make sure that all bits are unlocked.. */ /* workaround to make sure that all bits are unlocked.. */
writew(0x00, uap->port.membase + UART011_ICR); writew(0x00, uap->port.membase + REG_ICR);
/* /*
* WA: introduce 26ns(1 uart clk) delay before W1C; * WA: introduce 26ns(1 uart clk) delay before W1C;
* single apb access will incur 2 pclk(133.12Mhz) delay, * single apb access will incur 2 pclk(133.12Mhz) delay,
* so add 2 dummy reads * so add 2 dummy reads
*/ */
dummy_read = readw(uap->port.membase + UART011_ICR); dummy_read = readw(uap->port.membase + REG_ICR);
dummy_read = readw(uap->port.membase + UART011_ICR); dummy_read = readw(uap->port.membase + REG_ICR);
} }
static irqreturn_t pl011_int(int irq, void *dev_id) static irqreturn_t pl011_int(int irq, void *dev_id)
...@@ -1361,15 +1381,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id) ...@@ -1361,15 +1381,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
int handled = 0; int handled = 0;
spin_lock_irqsave(&uap->port.lock, flags); spin_lock_irqsave(&uap->port.lock, flags);
imsc = readw(uap->port.membase + UART011_IMSC); imsc = readw(uap->port.membase + REG_IMSC);
status = readw(uap->port.membase + UART011_RIS) & imsc; status = readw(uap->port.membase + REG_RIS) & imsc;
if (status) { if (status) {
do { do {
check_apply_cts_event_workaround(uap); check_apply_cts_event_workaround(uap);
writew(status & ~(UART011_TXIS|UART011_RTIS| writew(status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS), UART011_RXIS),
uap->port.membase + UART011_ICR); uap->port.membase + REG_ICR);
if (status & (UART011_RTIS|UART011_RXIS)) { if (status & (UART011_RTIS|UART011_RXIS)) {
if (pl011_dma_rx_running(uap)) if (pl011_dma_rx_running(uap))
...@@ -1386,7 +1406,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id) ...@@ -1386,7 +1406,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (pass_counter-- == 0) if (pass_counter-- == 0)
break; break;
status = readw(uap->port.membase + UART011_RIS) & imsc; status = readw(uap->port.membase + REG_RIS) & imsc;
} while (status != 0); } while (status != 0);
handled = 1; handled = 1;
} }
...@@ -1400,7 +1420,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) ...@@ -1400,7 +1420,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
{ {
struct uart_amba_port *uap = struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
unsigned int status = readw(uap->port.membase + UART01x_FR); unsigned int status = readw(uap->port.membase + REG_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
} }
...@@ -1409,7 +1429,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) ...@@ -1409,7 +1429,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
struct uart_amba_port *uap = struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
unsigned int result = 0; unsigned int result = 0;
unsigned int status = readw(uap->port.membase + UART01x_FR); unsigned int status = readw(uap->port.membase + REG_FR);
#define TIOCMBIT(uartbit, tiocmbit) \ #define TIOCMBIT(uartbit, tiocmbit) \
if (status & uartbit) \ if (status & uartbit) \
...@@ -1429,7 +1449,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) ...@@ -1429,7 +1449,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
unsigned int cr; unsigned int cr;
cr = readw(uap->port.membase + UART011_CR); cr = readw(uap->port.membase + REG_CR);
#define TIOCMBIT(tiocmbit, uartbit) \ #define TIOCMBIT(tiocmbit, uartbit) \
if (mctrl & tiocmbit) \ if (mctrl & tiocmbit) \
...@@ -1449,7 +1469,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) ...@@ -1449,7 +1469,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
} }
#undef TIOCMBIT #undef TIOCMBIT
writew(cr, uap->port.membase + UART011_CR); writew(cr, uap->port.membase + REG_CR);
} }
static void pl011_break_ctl(struct uart_port *port, int break_state) static void pl011_break_ctl(struct uart_port *port, int break_state)
...@@ -1477,7 +1497,7 @@ static void pl011_quiesce_irqs(struct uart_port *port) ...@@ -1477,7 +1497,7 @@ static void pl011_quiesce_irqs(struct uart_port *port)
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
unsigned char __iomem *regs = uap->port.membase; unsigned char __iomem *regs = uap->port.membase;
writew(readw(regs + UART011_MIS), regs + UART011_ICR); writew(readw(regs + REG_MIS), regs + REG_ICR);
/* /*
* There is no way to clear TXIM as this is "ready to transmit IRQ", so * There is no way to clear TXIM as this is "ready to transmit IRQ", so
* we simply mask it. start_tx() will unmask it. * we simply mask it. start_tx() will unmask it.
...@@ -1491,7 +1511,7 @@ static void pl011_quiesce_irqs(struct uart_port *port) ...@@ -1491,7 +1511,7 @@ static void pl011_quiesce_irqs(struct uart_port *port)
* (including tx queue), so we're also fine with start_tx()'s caller * (including tx queue), so we're also fine with start_tx()'s caller
* side. * side.
*/ */
writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC); writew(readw(regs + REG_IMSC) & ~UART011_TXIM, regs + REG_IMSC);
} }
static int pl011_get_poll_char(struct uart_port *port) static int pl011_get_poll_char(struct uart_port *port)
...@@ -1506,11 +1526,11 @@ static int pl011_get_poll_char(struct uart_port *port) ...@@ -1506,11 +1526,11 @@ static int pl011_get_poll_char(struct uart_port *port)
*/ */
pl011_quiesce_irqs(port); pl011_quiesce_irqs(port);
status = readw(uap->port.membase + UART01x_FR); status = readw(uap->port.membase + REG_FR);
if (status & UART01x_FR_RXFE) if (status & UART01x_FR_RXFE)
return NO_POLL_CHAR; return NO_POLL_CHAR;
return readw(uap->port.membase + UART01x_DR); return readw(uap->port.membase + REG_DR);
} }
static void pl011_put_poll_char(struct uart_port *port, static void pl011_put_poll_char(struct uart_port *port,
...@@ -1519,10 +1539,10 @@ static void pl011_put_poll_char(struct uart_port *port, ...@@ -1519,10 +1539,10 @@ static void pl011_put_poll_char(struct uart_port *port,
struct uart_amba_port *uap = struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
barrier(); barrier();
writew(ch, uap->port.membase + UART01x_DR); writew(ch, uap->port.membase + REG_DR);
} }
#endif /* CONFIG_CONSOLE_POLL */ #endif /* CONFIG_CONSOLE_POLL */
...@@ -1547,14 +1567,14 @@ static int pl011_hwinit(struct uart_port *port) ...@@ -1547,14 +1567,14 @@ static int pl011_hwinit(struct uart_port *port)
/* Clear pending error and receive interrupts */ /* Clear pending error and receive interrupts */
writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR); UART011_RTIS | UART011_RXIS, uap->port.membase + REG_ICR);
/* /*
* Save interrupts enable mask, and enable RX interrupts in case if * Save interrupts enable mask, and enable RX interrupts in case if
* the interrupt is used for NMI entry. * the interrupt is used for NMI entry.
*/ */
uap->im = readw(uap->port.membase + UART011_IMSC); uap->im = readw(uap->port.membase + REG_IMSC);
writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC); writew(UART011_RTIM | UART011_RXIM, uap->port.membase + REG_IMSC);
if (dev_get_platdata(uap->port.dev)) { if (dev_get_platdata(uap->port.dev)) {
struct amba_pl011_data *plat; struct amba_pl011_data *plat;
...@@ -1576,14 +1596,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) ...@@ -1576,14 +1596,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
* to get this delay write read only register 10 times * to get this delay write read only register 10 times
*/ */
for (i = 0; i < 10; ++i) for (i = 0; i < 10; ++i)
writew(0xff, uap->port.membase + UART011_MIS); writew(0xff, uap->port.membase + REG_MIS);
writew(lcr_h, uap->port.membase + uap->lcrh_tx); writew(lcr_h, uap->port.membase + uap->lcrh_tx);
} }
} }
static int pl011_allocate_irq(struct uart_amba_port *uap) static int pl011_allocate_irq(struct uart_amba_port *uap)
{ {
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
} }
...@@ -1599,11 +1619,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap) ...@@ -1599,11 +1619,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
/* Clear out any spuriously appearing RX interrupts */ /* Clear out any spuriously appearing RX interrupts */
writew(UART011_RTIS | UART011_RXIS, writew(UART011_RTIS | UART011_RXIS,
uap->port.membase + UART011_ICR); uap->port.membase + REG_ICR);
uap->im = UART011_RTIM; uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap)) if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM; uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
spin_unlock_irq(&uap->port.lock); spin_unlock_irq(&uap->port.lock);
} }
...@@ -1622,21 +1642,22 @@ static int pl011_startup(struct uart_port *port) ...@@ -1622,21 +1642,22 @@ static int pl011_startup(struct uart_port *port)
if (retval) if (retval)
goto clk_dis; goto clk_dis;
writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); writew(uap->vendor->ifls, uap->port.membase + REG_IFLS);
spin_lock_irq(&uap->port.lock); spin_lock_irq(&uap->port.lock);
/* restore RTS and DTR */ /* restore RTS and DTR */
cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR); writew(cr, uap->port.membase + REG_CR);
spin_unlock_irq(&uap->port.lock); spin_unlock_irq(&uap->port.lock);
/* /*
* initialise the old status of the modem signals * initialise the old status of the modem signals
*/ */
uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; uap->old_status = readw(uap->port.membase + REG_FR) &
UART01x_FR_MODEM_ANY;
/* Startup DMA */ /* Startup DMA */
pl011_dma_startup(uap); pl011_dma_startup(uap);
...@@ -1693,11 +1714,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap) ...@@ -1693,11 +1714,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
uap->autorts = false; uap->autorts = false;
spin_lock_irq(&uap->port.lock); spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR); cr = readw(uap->port.membase + REG_CR);
uap->old_cr = cr; uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR; cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE; cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR); writew(cr, uap->port.membase + REG_CR);
spin_unlock_irq(&uap->port.lock); spin_unlock_irq(&uap->port.lock);
/* /*
...@@ -1714,8 +1735,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap) ...@@ -1714,8 +1735,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
/* mask all interrupts and clear all pending ones */ /* mask all interrupts and clear all pending ones */
uap->im = 0; uap->im = 0;
writew(uap->im, uap->port.membase + UART011_IMSC); writew(uap->im, uap->port.membase + REG_IMSC);
writew(0xffff, uap->port.membase + UART011_ICR); writew(0xffff, uap->port.membase + REG_ICR);
spin_unlock_irq(&uap->port.lock); spin_unlock_irq(&uap->port.lock);
} }
...@@ -1867,8 +1888,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, ...@@ -1867,8 +1888,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
pl011_enable_ms(port); pl011_enable_ms(port);
/* first, disable everything */ /* first, disable everything */
old_cr = readw(port->membase + UART011_CR); old_cr = readw(port->membase + REG_CR);
writew(0, port->membase + UART011_CR); writew(0, port->membase + REG_CR);
if (termios->c_cflag & CRTSCTS) { if (termios->c_cflag & CRTSCTS) {
if (old_cr & UART011_CR_RTS) if (old_cr & UART011_CR_RTS)
...@@ -1901,17 +1922,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, ...@@ -1901,17 +1922,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
quot -= 2; quot -= 2;
} }
/* Set baud rate */ /* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD); writew(quot & 0x3f, port->membase + REG_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD); writew(quot >> 6, port->membase + REG_IBRD);
/* /*
* ----------v----------v----------v----------v----- * ----------v----------v----------v----------v-----
* NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
* UART011_FBRD & UART011_IBRD. * REG_FBRD & REG_IBRD.
* ----------^----------^----------^----------^----- * ----------^----------^----------^----------^-----
*/ */
pl011_write_lcr_h(uap, lcr_h); pl011_write_lcr_h(uap, lcr_h);
writew(old_cr, port->membase + UART011_CR); writew(old_cr, port->membase + REG_CR);
spin_unlock_irqrestore(&port->lock, flags); spin_unlock_irqrestore(&port->lock, flags);
} }
...@@ -2052,9 +2073,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch) ...@@ -2052,9 +2073,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
struct uart_amba_port *uap = struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port); container_of(port, struct uart_amba_port, port);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
barrier(); barrier();
writew(ch, uap->port.membase + UART01x_DR); writew(ch, uap->port.membase + REG_DR);
} }
static void static void
...@@ -2079,10 +2100,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) ...@@ -2079,10 +2100,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* First save the CR then disable the interrupts * First save the CR then disable the interrupts
*/ */
if (!uap->vendor->always_enabled) { if (!uap->vendor->always_enabled) {
old_cr = readw(uap->port.membase + UART011_CR); old_cr = readw(uap->port.membase + REG_CR);
new_cr = old_cr & ~UART011_CR_CTSEN; new_cr = old_cr & ~UART011_CR_CTSEN;
new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(new_cr, uap->port.membase + UART011_CR); writew(new_cr, uap->port.membase + REG_CR);
} }
uart_console_write(&uap->port, s, count, pl011_console_putchar); uart_console_write(&uap->port, s, count, pl011_console_putchar);
...@@ -2092,10 +2113,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) ...@@ -2092,10 +2113,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* and restore the TCR * and restore the TCR
*/ */
do { do {
status = readw(uap->port.membase + UART01x_FR); status = readw(uap->port.membase + REG_FR);
} while (status & UART01x_FR_BUSY); } while (status & UART01x_FR_BUSY);
if (!uap->vendor->always_enabled) if (!uap->vendor->always_enabled)
writew(old_cr, uap->port.membase + UART011_CR); writew(old_cr, uap->port.membase + REG_CR);
if (locked) if (locked)
spin_unlock(&uap->port.lock); spin_unlock(&uap->port.lock);
...@@ -2108,7 +2129,7 @@ static void __init ...@@ -2108,7 +2129,7 @@ static void __init
pl011_console_get_options(struct uart_amba_port *uap, int *baud, pl011_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits) int *parity, int *bits)
{ {
if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { if (readw(uap->port.membase + REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd; unsigned int lcr_h, ibrd, fbrd;
lcr_h = readw(uap->port.membase + uap->lcrh_tx); lcr_h = readw(uap->port.membase + uap->lcrh_tx);
...@@ -2126,13 +2147,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, ...@@ -2126,13 +2147,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
else else
*bits = 8; *bits = 8;
ibrd = readw(uap->port.membase + UART011_IBRD); ibrd = readw(uap->port.membase + REG_IBRD);
fbrd = readw(uap->port.membase + UART011_FBRD); fbrd = readw(uap->port.membase + REG_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
if (uap->vendor->oversampling) { if (uap->vendor->oversampling) {
if (readw(uap->port.membase + UART011_CR) if (readw(uap->port.membase + REG_CR)
& ST_UART011_CR_OVSFACT) & ST_UART011_CR_OVSFACT)
*baud *= 2; *baud *= 2;
} }
...@@ -2204,10 +2225,10 @@ static struct console amba_console = { ...@@ -2204,10 +2225,10 @@ static struct console amba_console = {
static void pl011_putc(struct uart_port *port, int c) static void pl011_putc(struct uart_port *port, int c)
{ {
while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) while (readl(port->membase + REG_FR) & UART01x_FR_TXFF)
; ;
writeb(c, port->membase + UART01x_DR); writeb(c, port->membase + REG_DR);
while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) while (readl(port->membase + REG_FR) & UART01x_FR_BUSY)
; ;
} }
...@@ -2334,8 +2355,8 @@ static int pl011_register_port(struct uart_amba_port *uap) ...@@ -2334,8 +2355,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
int ret; int ret;
/* Ensure interrupts from this UART are masked and cleared */ /* Ensure interrupts from this UART are masked and cleared */
writew(0, uap->port.membase + UART011_IMSC); writew(0, uap->port.membase + REG_IMSC);
writew(0xffff, uap->port.membase + UART011_ICR); writew(0xffff, uap->port.membase + REG_ICR);
if (!amba_reg.state) { if (!amba_reg.state) {
ret = uart_register_driver(&amba_reg); ret = uart_register_driver(&amba_reg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment